Aerospace Engineering Commons^™

Evaluating Uav Visual-Inertial Odometry Trajectory Error And Feature-Level Metrics Over Repetitive Floor Patterns, Anass El Mekkoussi

Doctoral Dissertations and Master's Theses

Visual-Inertial Odometry (VIO) is a widely used state estimation technique for Uncrewed Aerial Vehicle (UAV) navigation in environments where Global Navigation Satellite System (GNSS) signals are unavailable. VIO systems that rely on visual feature tracking are susceptible to performance degradation when operating over surfaces containing repetitive visual textures, where visually similar features can produce ambiguous correspondences that introduce errors into the trajectory estimate. Despite the prevalence of repetitive textures in indoor UAV operating environments such as warehouses, manufacturing facilities, and infrastructure corridors, the specific impact of different repetitive pattern geometries on per-surface VIO accuracy has received limited systematic study, and …

Flexible Fault-Tolerant Multi-Die Fpga-Based Architectures For Varying Space Environments, Yosof Ali Seif El Din Ali Maklad

Theses and Dissertations

It is well-known fact that spacecraft’s electronic components operate in an extreme harsh and varying space environments, beside changing orbit or passing through Van Allan Belts during orbital course results of radiation levels change. This thesis focuses on SRAM-based FPGA systems on-board of such spacecrafts, that are commonly utilized in space applications’ critical applications due to their capabilities and flexibility to reconfigure, since these systems are vulnerable to frequent negative impacts of ionizing radiation, thus inducing soft and hard errors leading to disastrous failures that could jeopardize the entire spacecraft. The soft errors’ effects are frequent yet can be mitigated, …

Model-Based Investigation Of The Influence Of Environmental Conditions On The Energy Supply Of Multirotor Uavs, Morten Roßberg, Hanna Dibbern, Claudia Werner

Journal of Aviation Technology and Engineering

Flight time of unmanned aerial vehicles (UAVs) is limited by available energy, which is affected by the mission profile and external factors, such as environmental conditions. Two main environmental conditions that need to be considered are the impact of wind and ambient temperature on the UAV and its energy supply. The purpose of this study is to examine the effects of wind and ambient temperature to conduct a preliminary evaluation of flight performance and flight limitations. For this reason, three locations in the United States—New York City, Miami, and Fairbanks—are selected and the impact of the considered environmental conditions of …

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study investigates the effect of vibration-induced loose connections on signal reflection (S11) for loose connection identification in aerospace coaxial cables using distributed sensing approach, which is effective in filtering the noise and identifying minor discontinuities. In this approach, a sliding gated window is applied to S11 signal, a fast Fourier transform is performed over the gated windows, cross-correlation is computed between the baseline and vibration-affected signals, and the standard deviation is mapped along the cable length. Sinewave signals from 9 kHz to 5 GHz were swept through cables with vibrating connectors under three conditions: fully tightened, loosened by 180°, …

Embeddable Optical Fiber Sensor For Simultaneous Strain And Temperature Monitoring, Amardeep Kaur, Sudharshan Anandan, Steve Eugene Watkins, Yinan Zhang, Kumbla Chandrashekhara, Hai Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

We present an embeddable hybrid optical fiber sensor based on a cascaded extrinsic Fabry–Pérot interferometer (EFPI) and intrinsic Fabry–Pérot interferometer (IFPI) for simultaneous strain and temperature monitoring in high-performance composite materials. The sensor is fabricated using femtosecond laser micromachining and is embedded within bismaleimide composite laminates manufactured via an out-of-autoclave process. Experimental results demonstrate linear and decoupled responses to strain and temperature, with the EFPI showing minimal temperature sensitivity (1.7 pm/°C) and the IFPI exhibiting high temperature sensitivity (16.1 pm/°C). Strain sensitivities for both components were consistent at 0.6pm/με in embedded conditions. The sensor maintained structural integrity and stable spectral …

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Performance Evaluation Of Thick Carbon Fiber-Reinforced Laminates Manufactured Using Six-Magnetron Microwave System, Nayan Pundhir, Sourav Bolar, Kumbla Chandrashekhara, Kristen Donnell, Jim Lua, Kalyan Shrestha, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microwave curing is a fast, energy-efficient, and a viable alternative to conventional thermal curing processes. It has been widely adopted for processing carbon fiber-reinforced polymer composites because the high electrical conductivity of carbon fibers enables strong microwave coupling. In this study, IM7/Cycom 5320-1 unidirectional prepreg has been used to fabricate 64-layer laminated composites. Symmetric cross-ply ([0°/90°]16S) and a quasi-isotropic ([45°/90°/−45°/0°]8S) layup have been investigated. A custom-built six-magnetron microwave applicator and an autoclave were employed to manufacture the composite panels. Degree of cure of the manufactured laminates was evaluated via differential scanning calorimetry. Interfacial bonding and porosity of the microwave-cured laminates …

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Wind Tunnel Instrumentation And Testing, Nicholas Marek, Abraham Mezera, Laura Jin, Hayden Smith, Curtis Cook

Student Scholar Symposium

The Raymond B. Jones College of Engineering was contacted by an automotive engineering firm seeking to use the college’s wind tunnel for gathering data on the aerodynamic performance of a proprietary prototype automotive door. Specifically, the client requested the quantification of the drag coefficient of the model at extreme wind speeds. The drag coefficient, a dimensionless number that quantifies the resistance of a specific geometric shape to airflow, will be a valuable datapoint for the client’s design iteration. Due to the sensitive nature of their work, the client has wished to remain anonymous. RBJCOE professors tasked a senior design team …

Graph Based Planning With Guarantees, Trazon Tyrik Jimerson

Mechanical Engineering ETDs

This thesis presents two graph-based methods with formal guarantees for motion planning and routing. First, the invariant-set motion planner (ISMP), which uses constraint admissible positive invariant (CAPI) sets of closed-loop dynamics, is adapted for spacecraft attitude planning to avoid moving keep-out zones. Contributions include time bounds for maneuvers via exponential stability, a single-stage reachability graph from one-step backward reachable CAPI sets, and its multi-stage expansion to certify node safety over time. Simulations verify safe attitude control with moving obstacles. Second, we formulate a convex optimization problem over a network for evacuation planning with operational constraints such as helicopter capacity and …

Parameter Informed Reinforcement Learning For Vehicle System Identification, Nathan Schaff

Doctoral Dissertations and Master's Theses

Accurate system identification is essential for modeling and controlling vehicle dynamics. This dissertation explores the application of Parameter Informed Reinforcement Learning (PIRL) as a novel approach to system identification (SYSID). PIRL integrates prior system knowledge, such as physical parameters, into reinforcement learning (RL) frameworks to improve estimation accuracy. The study begins with an overview of traditional SYSID methods and then introduces PIRL as a modification of standard RL. The research applies PIRL to short-period aircraft dynamics, demonstrating its effectiveness in both offline and online learning frameworks. The dissertation then further explores PIRL’s utility in an indirect model reference adaptive control …

Exploratory Study Of Semiconductor Nanomembranes In Em Applications, Grant D. Heileman

Electrical and Computer Engineering ETDs

Antenna systems are a cornerstone of modern technologies, playing an increasingly vital role in their advancement. As demand for compact, high-performance, and adaptable communication platforms grows reconfigurable antenna technologies are becoming essential. This research explores a novel front-end reconfigurable antenna system (FERAS) architecture that leverages the mechanical flexibility and photoconductive behavior of semiconductor nanomembrane (SNM) devices. By exploiting the emergent properties of ultra-thin silicon (Si) or gallium arsenide (GaAs) nanomaterials and optically exciting these samples using vertical-cavity surface-emitting laser (VCSEL) arrays, this study develops lightweight, low-cost, deployable antenna structures for satellite communications, remote sensing, GPS, and radar. Despite their significant …

Electrical Characterization Of Germanium Tin Alloys And Devices For Space Reliability, Kevin K. Choe

Theses and Dissertations

GeSn (germanium tin) alloys are potentially well suited for near-mid infrared space optoelectronic applications. Alloys of GeSn have similar properties to group III-V and mercury-cadmium-telluride semiconductors and are compatible with cost-effective complementary metal oxide semiconductor (CMOS) manufacturing technology. Recent progress in non-equilibrium remote plasma-enhanced chemical vapor deposition (RPECVD) has enabled the crystalline growth of GeSn with Sn concentrations of up to 10% without Sn surface segregation. Several experimental studies in previous literature report CVD- or molecular beam epitaxy (MBE)-grown GeSn alloys achieving a direct bandgap with 6%-9% Sn content. This novel growth technique opens opportunities for a cost-effective, next-generation optical …

Orbital Maneuvers And Interplanetary Trajectory Design Via Reinforcement Learning, Roberto Cuéllar Rangel

Doctoral Dissertations and Master's Theses

This dissertation investigates the application of reinforcement learning (RL) to the design and optimization of low-thrust spacecraft trajectories, with an emphasis on autonomy, adaptability, and robustness in the presence of system uncertainties and unmodeled perturbations. Classical approaches to low-thrust trajectory design are predominantly grounded in optimal control theory, which relies on the availability of precise dynamical models and often requires problem-specific reformulation and solver tuning. While optimal control methods offer high accuracy under deterministic conditions, their sensitivity to stochastic disturbances and computational limitations in highly nonlinear or uncertain environments pose significant challenges for future autonomous space missions.

To address these …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Flysurf: A Flying Robotic Surface With Shape Morphing And Motion Control, Kevin Aubert De Luchi Lomellini

Electrical and Computer Engineering ETDs

This thesis introduces FlySurf, a novel flying robotic surface capable of simultaneous shape morphing and motion control. FlySurf is modeled as a mesh-based dynamic structure actuated by multiple unmanned aerial vehicles, enabling complex deformations during flight. The proposed control architecture comprises three main components. First, a state estimator to infer the robotic surface state from limited observations. Second, a shape trajectory planner that incorporates an affine deformation term to preserve surface integrity during shape transitions. Third, a surface controller to minimize the error between the desired and actual surface configurations.

The methodology is validated through realistic simulations and hardware experiments, …

Chromatography In Analysis And Quality Control Of Oil And Gas Products: Modern Approaches And Prospects, Muborak Akramovna Mirshomilova, Natalia Evgenievna Sheina, Lala Bekirova

Technical science and innovation

Chromatography plays a key role in the analysis and quality control of oil and gas products. Modern chromatographic methods, including gas and liquid chromatography, provide high accuracy, sensitivity and speed of analysis. They allow you to identify impurities, control the composition and compliance of products with standards. The article considers innovative approaches, such as multidimensional chromatography and the use of automated systems. Development prospects are discussed, including integration with AI and digital technologies, which opens up new opportunities to improve the efficiency of quality control in the oil and gas industry. This article considers the role of chromatographic methods in …

An Advanced Hexacopter For Autonomous Exploration Of Mars: Attitude Control And Navigation Strategies, Laura Sopegno

Electronic Theses and Dissertations

Mars exploration has recently witnessed major interest within the scientific community. Unmanned robotic platforms offer reliable solutions to acquire and collect data and information from the Red Planet. Particularly, rovers, landers, and orbiters have significantly shaped planetary exploration on the Moon and Mars, contributing significantly to past missions while also highlighting limitations in their capacity to cover diverse terrains over wide ranges. Given current advances in Unmanned Aircraft Systems (UASs), Unmanned Aerial Vehicles (UAVs) offer promising alternatives for future scientific missions.

It is argued that hexacopters, with their relatively compact design and redundancy, present a promising …

Pressure Switch Tester, Michael Starasinich, Andrew Dobson, Jordan Huschen, Mitchell Smith, Melvin Brown Iii

Honors Capstones

Abstract—- The Pressure Switch Test Stand is a comprehensive and automated testing solution designed to streamline the actuation and validation of simultaneously. At the core of the system is a PLC-controlled architecture that enables precise control and simulation of pressure conditions, replicating real-world scenarios to ensure accurate and reliable switch performance.

This test stand integrates robust mechanical fixtures, a reliable pneumatic control system, custom-designed electrical circuits, and a modular software interface, working in unison to deliver consistent and high-fidelity testing outcomes. Each pressure switch undergoes a sequence of pressure ramps and holds, with the system continuously monitoring switch states, activation …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Deep Reinforcement Learning For Leo Satellite Grouping, James E. Minteer

Theses and Dissertations

This research investigates jamming evasion using DRL to provide an autonomous solution that repositions a geostationary satellite experiencing directed, terrestrial based jamming. Second, this thesis applies DRL to an area of research for LEO satellite constellations, user grouping, using a portion of an Air Force Research Lab reinforcement learning framework. As LEO satellites orbit the earth, they must constantly re-evaluate not only which users they are able to connect to, but on which of its multiple beams. This model succeeds in finding a balance between maximizing signal strength and minimizing overhead from switching user assignments, all while requiring fewer costly …

Fusion-Based Utilization And Synthesis Of Efficient Detections, Ethan C. Rogers, Parker H. Liberatore, Thomas G. James

Endeavors: Mississippi State Undergraduate Research Journal

This study aimed to develop hardware and software for an object detection fusion system, using three different sensors. The system was built and studied with the motivating application of autonomous drones searching for and detecting people in a search-and-rescue scenario. The system’s performance was compared to that of individual sensors deployed for the same task. The focus of the research was to prove the competence and benefits of a decision-level fusion method as it was applied to a lightweight object detection architecture, and the driving motivators behind the study were simplicity in implementation and good computational performance. In short, the …

Performance Evaluation And Multiphysics Process Modeling Of Carbon Fiber Reinforced Thermoset Composites Using Microwave And Autoclave, Nayan Pundhir, Patrick Schwartzkopf, K. Chandrashekhara, Logan Wilcox, Kristen M. Donnell, Jim Lua, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, IM7/Cycom 5320-1 unidirectional prepreg has been utilized to manufacture 16-layer laminated composites: a symmetric cross-ply ([0°/90°]4s) and a quasi-isotropic ([45°/90°/−45°/0°]2s) configuration. Microwave and autoclave curing processes have been employed to manufacture the laminated composites. The manufactured composite cure was assessed using differential scanning calorimetry (DSC). The quality and porosity of the microwave-cured parts were juxtaposed to those of autoclave-cured parts through optical microscopy and micro-computed tomography (micro-CT) scanning. Mechanical characterization of the microwave-cured panels was conducted using uniaxial tensile and flexural tests, with results juxtaposed to autoclave-cured samples. Experimental characterization revealed that the microwave-cured parts exhibited nearly …

Optimal Manipulation Motion Action Planner Enabled By Physics Informed Neural Networks, Jonathon E. Slightam, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

Autonomous robotic manipulation in unstructured environments faces many challenges and is hindered by capabilities that bridge the gap between perception and acting on the world. Action plans that are centric to object motion rather than end-of-arm tooling behavior may aid this. This paper presents an autonomous action planner for a feedback linearizeable system comprised of three base motions that can be leveraged on their own or in combination to give custom motion plans. The optimization routine for the three different types of motion are presented, which are integrated into physics informed neural networks. A component of this is the autonomy …

The Space Rescue Professional: Operationalizing Guardians For The Future, Benjamin Johnis, Robert Bettinger, James Dean

Faculty Publications

The escalating competition in space exploration demands a dedicated space rescue capability. This article argues for the establishment of a space rescue professional (SRP) career field within the Department of Defense and the US Space Force. By harnessing existing US Air Force combat rescue expertise and partnering with the National Aeronautics and Space Administration, the Space Force can rapidly develop a robust SRP program with the warrant officer corps as its backbone. This article addresses a critical gap in national space policy to outline a cost-effective dual-service training pipeline and SRP operational roles. Such an investment safeguards astronauts, bolsters US …

Deep Target Recognition: Semi-Supervised Annotation, Sensor Fusion And Super-Resolution, Shoaib Meraj Sami

Graduate Theses, Dissertations, and Problem Reports (ETD)

Despite the recent expansion of machine learning algorithms to cover a wide range of disciplines, several areas of automatic target recognition (ATR) remain underexplored. This dissertation presents tools developed to improve performance in three significant aspects of ATR: semi-supervised annotation, sensor fusion, and image super-resolution. The aim of the semi-supervised methods is to automatically annotate targets in scenarios where labeled data are scarce in the target domain but available in the source domain. Secondly, to address the limitations of individual image sensors and enhance robustness under different environmental conditions and man-made constraints, a sensor fusion algorithm was developed to improve …

Design Of An Active-Control Pressure Regulator For A Rocket, Seth Arkwright

Williams Honors College, Honors Research Projects

An electronically actuated pressure-regulation valve and controller are necessary for maintaining pressure levels in a pressure-fed liquid-fueled rocket engine. Mechanical regulators are too heavy and have unacceptably high-pressure variation throughout the operation of a dynamic system like a rocket. Developing an electronic pressure regulator using a PID controller is a method by which a reliable, accurate, and lightweight flow regulator can be built for use on a rocket vehicle. This work will outline the development of flow simulations, PID controller, physical valve hardware, and initial testing.

Autonomous Landscape Exploration Rover Using Imaging Surface Navigation (Alexis), Noah Jones, Dominic Salupo

Williams Honors College, Honors Research Projects

The objective is to develop a small-form-factor rover prototype that can be used to prove out a novel traversal method for use on extraterrestrial surfaces. The novel traversal method being proposed is LIDAR/CV-enhanced navigation, provided by a detachable flight vehicle that can communicate with the rover. On planets with thin atmospheres, cold gas thrusters or similar may be needed, but for the scope of this project more traditional flight/propulsion methods will be used.

Vector Estimation For Continuous Tracking Of Observed Radio Signals (V.E.C.T.O.R.) Lunar Navigation System, Dimitry Melnikov, Evan Bartel, Andrew Burrier, Goran Gjorgievski

Williams Honors College, Honors Research Projects

NASA's Artemis program requires precise navigation capabilities to establish the first sustained presence on the lunar surface. However, as launches bring necessary orbital infrastructure, the Artemis program will face a critical period during which reliable lunar navigation is not possible. To address this challenge, the V.E.C.T.O.R. system tracks assets, such as rovers and astronauts, as User Terminals relative to a pre-existing cell tower, or Base Station. To do so, the system leverages existing Base Station hardware to calculate the location of User Terminals in conjunction with existing communications infrastructure.

Review: Dielectric Barrier Discharge Plasma Actuators For In-Flight Applications, Sabeel Saleem Mohammed

Anthós

Dielectric barrier discharge (DBD) is a phenomenon observed when high voltage is passed through a dielectric barrier at high frequencies. Current DBD plasma actuators (PAs) excel at laminar fluid boundary layer control but suffer from limited momentum flux and fluid mechanic inefficiencies. In this article, Mohammed analyzes previous discourse on DBD PAs and offers directions for future research and potential DBD PA applications. Previous work on DBD PAs documented thrust generation at high voltages and frequencies, thrust in varying fluid compositions, and vortex generation. However, certain arrangements hinder flow magnitudes, limiting the use of multiple DBD PAs in close proximity. …