Aerospace Engineering Commons^™

Flow Around An Object Projected From A Cavity Into A Supersonic Freestream, Scott T. Bjorge

Theses and Dissertations

The pressure and flow field of a supersonic flow over a cavity, with and without a store, was the focus of this experiment. One cavity geometry (length to depth ratio 3.6) was studied; the freestream Mach number and the placement of the store relative to the cavity floor were varied. The pressure spectra on the cavity floor were markedly different between Mach numbers of 1.8 and 2.9. The Mach 1.8 case exhibited clear spectral peaks consistent with predictions by Rossiter, whereas the Mach 2.9 flow did not. With the store placed within the free shear layer, the pressure fluctuations on …

Magnetogasdynamic Flow Control Of A Mach Reflection, Brian E. Earp

Theses and Dissertations

Two-dimensional regular and Mach reflections have been studied in the Mach 4.96 dual-solution domain for a 25° and 26° double-fin inlet. The steady-state computational Mach and regular reflections were subjected to magnetogasdynamic forces to determine whether these forces could be used as a possible flow control mechanism. The numerical code employed for this research solved the inviscid Euler equations with added source terms for the ponderomotive force and accompanying energy interactions. The 25° regular reflection was determined to be extremely sensitive to a decelerating Lorentz force. Transient application of the force led to the transition of the regular reflection to …

An Original Method For Computing Complex Non-Premixed Flows In Chemical Equilibrium, Raphael Cioffl

Master's Theses - Daytona Beach

A novel method for computing chemical equilibrium reactions in three-dimensional reacting fluid flows is introduced in this paper. The originality of the method is that continuity equations are solved for the atomic densities rather than for the molecular species densities, as is the case for non-equilibrium flow calculations. The method is suited for applications to mixing flows in rocket engine combustors, where, due to the typical low convective speed, chemical reaction is best modeled as an equilibrium process. Equilibrium formulations usually describe the flow as a perfect, atomically uniform mix between the fuel and the oxidizer. This assumption tends to …

A Numerical Analysis Of A Non-Porous, Flexible Upper Airfoil Surface, Asao Omura

Mechanical & Aerospace Engineering Theses & Dissertations

The aerodynamic behavior of the early Wright brothers' airfoils is an important element of the history of aeronautics. Their fabric-covered wings were not constrained to maintain the airfoil shape of their wooden rib substructures and therefore differences in performance between rigid and flexible Wright airfoil shapes can be expected. The purpose of this thesis was to develop a systematic numerical approach that allows an assessment of the influence of the fabric on the overall aerodynamic behavior of the Wright Model B airfoil. The Model B airfoil was chosen because it is the earliest "production" airfoil and has sufficient documentation to …

Implementation And Testing Of Unsteady Reynolds-Averaged Navier-Stokes And Detached Eddy Simulation Using An Implicit Unstructured Multigrid Scheme, Juan A. Palaez

Mechanical & Aerospace Engineering Theses & Dissertations

Investigation and development of the Detached Eddy Simulation (DES) technique for the computation of unsteady flows on unstructured grids are presented. The motivation of the research work is driven by the ultimate goal of predicting separated flows of aerodynamic importance, such as massive stall or flows over complex non-streamlined geometries. These cases, in which large regions of massively separated flow are present, represent a challenge for conventional Unsteady Reynolds-Averaged Navier-Stokes (URANS) models, that in many cases, cannot produce solutions accurate enough and/or fast enough for industrial design and applications. A Detached Eddy Simulation model is implemented and its performance compared …

Development Of An Experimental Test Section For Forcing Unsteady Flow In A Linear Compressor Cascade Using Circular Rods, Patrick C. Wade

Theses and Dissertations

Upstream propagating waves impinging on a cascade of compressor blades were examined in an effort to better understand the influence of downstream components on high cycle fatigue in turbine engines. An array of cylinders was used to simulate the unsteady field generated by a rotor downstream of a set of stators. The unsteady flow upstream of a single cylinder and an array of cylinders, with and without an upstream cascade, was examined experimentally and computationally. Computational results indicate that the cylinders would only shed coherently when placed downstream of a set of blades. Coherent shedding is created when each of …

Computational Fluid Dynamics Investigation Of Vortex Breakdown For A Delta Wing At High Angle Of Attack, Jacob A. Freeman

Theses and Dissertations

Using the commercially available FLUENT 3-D flow field solver, this research effort investigated vortex breakdown over a delta wing at high angle of attack (α) in preparation for investigation of active control of vortex breakdown using steady, along- core blowing. A flat delta-shaped half-wing with sharp leading edge and sweep angle of 60° was modeled at α=18° in a wind tunnel at Mach 0.04 and Reynolds number of 3.4 x 10⁵. A hybrid (combination of structured and unstructured) numerical mesh was generated to accommodate blowing ports on the wing surface. Results for cases without and with along-core blowing …

Nonlinear, Transonic Flutter Prediction For F-16 Stores Configuration Clearance, Raymond G. Toth

Theses and Dissertations

Wing flutter, or more accurately limit cycle oscillation (LCO), has been an issue for the F-16 since its operational deployment. Different store configurations and the permutations of those configurations after weapons are released will cause LCO to either disappear or appear. Unfortunately, the current method used by engineers for predicting LCO onset is based on linear, subsonic aerodynamic theory with no corrections for transonic effects. Predictions using this method are often good in frequency, but can be far off in predicting onset speed, forcing flutter engineers to rely more on experience and interpolation from similar configurations to design flight test …

Use Of Dimples To Suppress Boundary Layer Separation On A Low Pressure Turbine Blade, Kurt P. Rouser

Theses and Dissertations

Flow separation on a low pressure turbine blade is explored at Reynolds numbers of 25k, 45k and 100k. Experimental data is collected in a low-speed, draw-down wind tunnel using a cascade of eight Pak-B blades. Flow is examined from measurements of blade surface pressures, boundary layer parameters, exit velocities, and total pressure losses across the blade. Two recessed dimple shapes are assessed for suppressing flow separation and associated losses. One dimple is spherical, and the second is asymmetric, formed from a full dimple spanwise half-filled. A single row of each dimple shape is tested at 50%, 55% and 65% axial …

Adaptive Harmonic Balance Method For Unsteady, Nonlinear, One-Dimensional Periodic Flows, Raymond C. Maple

Theses and Dissertations

A new adaptive split-domain harmonic balance computational fluid dynamics (CFD) method is developed to solve highly nonlinear time-periodic flows such as those found in turbomachinery. The basic harmonic balance CFD method transforms an unsteady time-periodic problem into a steady-state problem by assuming a solution in the form of a Fourier series in time. The new method employs a unique multi-domain split-operator solution technique to remove a large-series stability restriction present in previous harmonic balance CFD approaches. In addition, the new method adapts the frequency content to the flow, starting with a small number of Fourier frequencies and augmenting the frequency …

Numerical Studies Of Transition For Flows Around Multi-Element Airfoils, Fengjun Liu

Dissertations

The transition of flows around a multi-element airfoil has been numerically studied using RANS with a k - e two-equation transition model, LST and DNS. The transition model uses an effective eddy-viscosity by coupling an intermittence-like correction to a turbulence eddy-viscosity that can be obtained via solving a parent k - e turbulence model. The transition model is truly predictive in that it is able to predict transition onset locations without having to specify prior knowledge of the targeted transition process. The predicted transition onset locations for all the cases studied were compared with the measured data. The results suggest …

External Aerodynamics Of Heavy Ground Vehicles: Computations And Wind Tunnel Testing, Ilhan Bayraktar

Mechanical & Aerospace Engineering Theses & Dissertations

Aerodynamic characteristics of a ground vehicle affect vehicle operation in many ways. Aerodynamic drag, lift and side forces have influence on fuel efficiency, vehicle top speed and acceleration performance. In addition, engine cooling, air conditioning, wind noise, visibility, stability and crosswind sensitivity are some other tasks for vehicle aerodynamics. All of these areas benefit from drag reduction and changing the lift force in favor of the operating conditions. This can be achieved by optimization of external body geometry and flow modification devices. Considering the latter, a thorough understanding of the airflow is a prerequisite.

The present study aims to simulate …

The Investigation Of Hypervelocity Gouging, David J. Laird

Theses and Dissertations

The slipper/rail interface of a hypervelocity rocket sled is subject to immense forces due to dynamic loads and impact of the slipper with the rail, and tremendous heating due to aerodynamic and frictional effects is produced at the interface. Under these severe loading conditions, the material in the rail will sometimes experience large non-linear deformations known as gouging. Hydrocodes are computational solvers designed to handle such non-linear, large deformation, high shock, hydrodynamic applications. The ability of the hydrocode CTH to handle gouge modeling is considered, as well as the manner in which temperature environments affect deformation and plastic strain. The …

Computational Aerodynamic Analysis Of The Flow Field About A Hypervelocity Test Sled, Andrew J. Lofthouse

Theses and Dissertations

The flow field about the nose section of a hypervelocity test sled is computed using computational fluid dynamics. The numerical model of the test sled corresponds to the Nike O/U narrow gage sled used in the upgrade program at the High Speed Test Track facility, Holloman Air Force Base, New Mexico. The high temperatures and pressures resulting from the aerodynamic heating and loading affect the sled structure and the performance of the vehicle. The sled transitions from an air environment to a helium environment at a speed of approximately 3,300 feet per second (Mach 3 in air, Mach 1.02 in …

The Combined Effects Of Freestream Turbulence, Pressure Gradients, And Surface Roughness On Turbine Aerodynamics, Christine P. Ellering

Theses and Dissertations

This work used scaled facsimiles of real turbine blade surfaces to characterize correlations between turbine blade roughness, freestream turbulence, pressure gradients and skin friction (Cf). Addition of roughness caused Cf to increase: up to 300% for the roughest surface. Addition of freestream turbulence resulted in 125% increase for the same surface. The combined effects showed increases up to 380%. Although decreasing roughness, freestream turbulence, and Reynolds number resulted in less dramatic results, it was concluded that the Cf increases due to combined effects were consistently higher than their corresponding sum of the parts. The combined effects of roughness and pressure …

An Analytical Study Of T-38 Drag Reduction In Tight Formation Flight, Eugene H. Wagner Jr.

Theses and Dissertations

This thesis explores the benefits of flying in a tight formation, mimicking the natural behavior of migratory birds such as geese. The first phase of the research was to determine an optimal position for the wingman of a tight formation flight of T-38 Talon aircraft using the HASC95 vortex lattice code. A second wingman was then added to determine the benefit derived by increasing formation size. The second wingman was predicted to derive an even greater induced drag benefit than the first wingman for T-38s operating at Mach 0.54 at a 10,000-foot altitude. The predicted values were 17.5% savings for …

Atmospheric Turbulence Conditions Leading To Focused And Folded Sonic Boom Wave Fronts, Andrew A. Piacsek

All Faculty Scholarship for the College of the Sciences

The propagation and subsequent distortion of sonic booms with rippled wave fronts are investigated theoretically using a nonlinear time-domain finite-difference scheme. This work seeks to validate the rippled wave front approach as a method for explaining the significant effects of turbulence on sonic booms [A. S. Pierce and D. J. Maglieri, J. Acoust. Soc. Am. 51, 702–721 (1971)]. A very simple description of turbulence is employed in which velocity perturbations within a shallow layer of the atmosphere form strings of vortices characterized by their size and speed. Passage of a steady-state plane shock front through such a vortex layer …

Active And Adaptive Flow Control Of Twin-Tail Buffet And Applications, Zhi Yang

Mechanical & Aerospace Engineering Theses & Dissertations

Modern fighter aircraft with dual vertical tails are operated at high angles of attack. The vortex generated by leading edge extension (LEX) breaks down before reaching the two vertical tails. The wake of highly unsteady, turbulent flow causes unbalanced broadband aerodynamic loading on the tails and may produce severe buffet on the tails and lead to tail fatigue failure.

Flow suction along the vortex cores (FSVC) is investigated as an active control method for tail-buffet alleviation. Suction tubes have been tilted at different angles to study the control effectiveness of suction tubes orientation. Flow field response, aerodynamic loading and aeroelastic …

Pressure And Flow Validation Of A Second Generation Gas Extraction Probe For A Hybrid Rocket Gas Extraction System, Constance Meadors, Andrew B. Wright

Journal of the Arkansas Academy of Science

A gas extraction system (GES) has been designed for use with the hybrid rocket facility at the University of Arkansas at Little Rock (UALR) for spectroscopic analysis of rocket plumes. While monitoring gas flow-rate and pressure, the GES extracts gases from the hybrid rocket plume and transports them to a mass spectrometer. This paper describes design and construction of a gas extraction probe (GEP) prototype capable of extracting gases directly from the plume. Gas dynamics equations were used to design two venturi-type GEP, converging and converging-diverging. The probe was tested with air to verify design assumptions. Flow rate through the …

Reduced Order Modeling For High Speed Flows With Moving Shocks, David J. Lucia

Theses and Dissertations

The use of Proper Orthogonal Decomposition (POD) for reduced order modeling (ROM) of fluid problems is extended to high-speed compressible fluid flows. The challenge in using POD for high-speed flows is presented by the presence of moving discontinuities in the flow field. To overcome these difficulties, a domain decomposition approach is developed that isolates the region containing the moving shock wave for special treatment. The domain decomposition implementation produces internal boundaries between the various domain sections. The domains are linked using optimization-based solvers which employ constraints to ensure smoothness in overlapping portions of the internal boundary. This approach is applied …

Computational Fluid Dynamic Study Of A Nascar Winston Cup Series Race Car, Terry L. Meek Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Since the goal of NASCAR racing is to win and since drag is a force the vehicle must overcome, a thorough understanding of the drag generating airflow around and through the automobile is greatly desired. The external airflow contributes to most of the drag that a car experiences and most of the downforce the vehicle produces. Therefore, an estimate of the vehicle's performance may be evaluated using a computational aerodynamics model. This thesis presents a computational fluid dynamic (CFD) analysis of a NASCAR Winston Cup series race car to investigate the salient flow characteristics.

Before a computational analysis could be …

Techniques For Reduced Order Modeling Of Aeroelastic Structures With Deforming Grids, John S. R. Anttonen

Theses and Dissertations

Reduced order modeling (ROM) seeks to make the modeling of aeroelastic behavior practical by reducing computation time for design codes. Deforming grids are often used in aeroelastic problems to account for the deformation of the structure. Proper Orthogonal Decomposition (POD/ROM) is a ROM technique that operates in an index-space for computations, not accounting for changes in grid dynamics, and must be modified to reflect grid deformation properly. To investigate and account for the effects of grid deformation on POD/ROM, a new algorithm is developed that incorporates modifications to the usual formulation. Evaluation of the new algorithm is accomplished through application …

Transonic And Supersonic High Alpha Flow Prediction And Control For An Sc-X Space Vehicle, Ruobo You

Mechanical & Aerospace Engineering Theses & Dissertations

Universal Space Line (USL) is interested in developing an aerospace vehicle that flies at very high angles of attack (AOAs) through wide range of Mach numbers. The basic model configuration is called SC-X model, which consists of a blunt cone and a cylindrical afterbody. A structured O-type grid was generated for this model by numerically solving elliptic partial differential equations. The three-dimensional, unsteady, compressible, Reynolds-averaged Navier-Stokes equations coupled with Spalart-Allmaras turbulence model were used as computational tool to investigate the transonic and supersonic flows around the SC-X model pitched at AOA of 45°. For the code validation, this computational solver …

Measurements Of The Effects Of Tunnel Wall Proximity On The Velocity Field Upstream Of A Rod With Vortex Shedding In Low-Speed Flow, David R. Hopper

Theses and Dissertations

High cycle fatigue is an important consideration in blade design for turbomachinery. Blades in an engine undergo countless loading cycles in a lifetime, the result of pressure waves that propagate upstream and downstream from disturbances in the flow. Better understanding of these effects would allow blade designers to reduce the effects of high cycle fatigue, such as costly recurring maintenance or catastrophic engine failure. An experimental study was undertaken to determine the unsteady flow field upstream of a single cylinder in a subsonic flow. Von Karman vortex shedding from the cylinder produced a forcing function much like periodic blade passage …

Suppression Of Post-Buckling Deflection And Panel-Flutter Using Shape Memory Alloy, Mohammad Tawfik Abo El So-Oud

Mechanical & Aerospace Engineering Theses & Dissertations

A novel concept proposed is the use of Shape Memory Alloy (SMA) to reduce the panel thermal deflection and flutter responses. SMA has unique ability to recover large prestrains completely when the alloy is heated (by aerodynamic heating in the present case) above the austenite start temperature A_s. During the recovery process, a large tensile recovery stress occurs if the SMA is restrained.

In this thesis, a panel subject to the combined aerodynamic and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA …

Large Amplitude Pitching Of Supermaneuver Delta Wings Including Flow Control, Yahia A. Abdelhamid

Mechanical & Aerospace Engineering Theses & Dissertations

The unsteady, three-dimensional Navier-Stokes equations are solved to simulate and study the aerodynamic response of a delta wing undergoing large amplitude pitching motion up to 90° angle of attack. The primary model under consideration consists of a 76° swept, sharp-edged delta wing of zero thickness, initially at zero angle of attack. The freestream Mach number and Reynolds number are 0.3 and 0.45 × 106, respectively. The governing equations are solved time-accurately using the implicit, upwind, Roe flux-difference splitting, finite-volume scheme. Both laminar and turbulent flow solutions are investigated. In the laminar flow solutions, validation of the computational results is carried …

Development And Application Of Adaptive Dynamic Grids For Wake Vortex/Ground Interaction, Ilker Emin Türkgeldi

Mechanical & Aerospace Engineering Theses & Dissertations

An adaptive and dynamic grid approach is developed for the numerical computations of wake vortex flow problems with ground interaction. The unnecessary grid points at the far field of the original, large, single zone grid are removed for computational efficiency. Next, the grid is modified into an adaptive one, where the fine core region keeps track of the vortices and can be split into two regions when the vortex separation distance exceeds a specified limit length. In the final step a multi zonal feature is added to this grid by means of two embedded grids placed at the vortex centers …

Wind Tunnel Investigation Of Joined Wing Configurations, Jennifer Corneille

Theses and Dissertations

The Air Force Research Laboratory's Munitions Directorate is looking to extend the range of its small smart bomb. One proposed idea is to retrofit the bombs with a wing kit, particularly a joined wing configuration. A typical joined wing configuration is one where the wings are positioned in such a way that they form a diamond in both plan and front views. The purpose of this study is to conduct low speed wind tunnel testing of the joined wing configuration to help determine if the joined wing is more beneficial than a single wing configuration. Configurations with differing sweep angles …

Flow Separation Prevention On A Turbine Blade In Cascade At Low Reynolds Number, James P. Lake

Theses and Dissertations

The problem of flow separation from a low pressure turbine blade was investigated. The operating conditions under which the separation occurred were documented through measurement of surface pressure coefficients, boundary layer velocity and turbulence profiles, total pressure loss coefficient and wake velocity momentum deficit. Three different means for reducing the losses associated with the flow separation were also investigated. A boundary layer trip, dimples, and V-grooves were studied as passive means requiring no additional energy to reduce the separation losses. The boundary layer trip was only successful for an inlet and axial chord Reynolds number of 50k with a reduction …

Reduction Of Helmet Buffeting In Open Cockpit, Single Seat Race Cars, Mark Vallon

Master's Theses - Daytona Beach

At speeds approaching 240 mph, drivers of open cockpit race cars frequently experience large aerodynamic forces which act on the helmet. These forces, specifically the aerodynamic buffeting of the helmet, reach levels which are very fatiguing and distracting to the driver, and are therefore unacceptable. Little investigation has been done in this area, because normal wind tunnel tests do not isolate the helmet from the rest of the car. During this project, measurements of aerodynamic forces acting on a helmet inside a race car cockpit were made to determine the cause of the buffeting, and to determine possible improvements.

Tests …