Engineering Commons^™

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

Macro - And Microstructure Evaluation And Field Applications Of Concrete With Recycled Glass Pozzolan, Marija Krstic

Dissertations and Theses

Concrete is the most used material in the world, second only to water. Conventional concrete is produced with Portland cement (PC). The production of cement is an energy intensive operation that has raised significant environmental concerns, since one ton of cement generates an equal ton of CO₂. In the USA about 90 million tons of cement are used annually, with 3 million tons used in New York. Most contemporary concrete applications for buildings and infrastructure use high-performance concrete (HPC) mixtures which are produced by replacing a percentage of cement with supplementary cementitious materials (SCMs), consisting mainly of fly-ash …

Sustainability-Based Expert System For Additive Manufacturing And Cnc Machining, Josage Chathura Pamuditha Perera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The development of technologies which enable resource efficient production is of paramount importance for the continued advancement of the manufacturing industry. In order to ensure a sustainable and clean energy future, manufacturers should be able to contrast and validate existing manufacturing technologies on a sustainability basis. In the post COVID-19 era of enterprise management, the use of artificial intelligence to simulate human expert decision making abilities will open new doors to achieving heightened levels of productivity and efficiency. The introduction of innovative technologies such as CNC machining and 3D printing to production systems has redefined the manufacturing landscape in a …

Public Perception Of Different Planting Techniques Using Augmented Reality, Sultana Quader Tania

College of Graduate Studies: Theses & Dissertations

The objective of this study was to measure public perception of the different planting techniques (block and matrix), which are used at visitor information centers (VICs) and other rights of way (ROW) areas. The main factors that affect public perception of planting techniques were identified through an extensive literature review and qualitative survey from four welcome centers in the state of Georgia. The ranking of those indicators, based on public preferences, was discovered through a quantitative survey. During the first phase of the quantitative survey, images of block and matrix were used. An iOS-based user-friendly and cost-effective augmented reality (AR) …

Household’S Willingness (Wtp) To Pay To The Utility, Rakhshinda Bano, Mehdi Khiadani, Steven Burian

Research Datasets

The dataset contains the water use at household level, payments to the utility and household income.

Feasibility Of Reclaimed Lumber In Construction, Ernest Michael Banchero

Construction Management

As sustainable building becomes more and more prevalent in the construction industry, builders and homeowners are experimenting more with different kinds of building materials. The focus of this paper is on reclaimed wood. One can find reclaimed wood almost anywhere, in an old barn, lumber yards, basically any place that has valuable wood that is not being used. This wood is then taken to a mill and cleaned up. Imperfections are removed, nails are taken out, and any finish that will be used is applied. Reclaimed wood has grown in popularity in construction projects over the last few decades. The …

Hvac System Energy Audit For Leverett Elementary School, Connor Smalling

Biological and Agricultural Engineering Undergraduate Honors Theses

Leverett Elementary School is located in Fayetteville, AR. The school needs significant upgrades to its infrastructure. The Fayetteville Public School District has voted to pursue an Energy Services Performance Contract (ESPC) in order to finance the desired upgrades to Leverett Elementary, among other schools in the district.

The scope of this thesis was to perform an energy audit on the existing heating, ventilation, and air conditioning (HVAC) system. By using an energy modeling software, eQuest, the building and the existing base system were modeled to determine utility consumption. Three different HVAC system alternatives were analyzed against the base system by …

Green Up Pavement Rehabilitation Design Tool, Dragos Andrei, Robert E. Kochan, Jose H. Perez

Mineta Transportation Institute

While designers produce pavement rehabilitation recommendations every day, for projects of all sizes, most designers have little information on the environmental impact of their recommendations. This research developed a new decision tool, called the “Green Up Pavement Rehabilitation Design Tool,” to allow the comparison of different rehabilitation solutions in terms of greenhouse gas emissions and to encourage sustainable practices such as materials recycling and the use of permeable, cool, and quiet pavement surfaces. The project aligns with the major goal of California Senate Bill 1, which is “to address deferred maintenance on the state highway system and the local street …

Sustainable Solutions, Fall/Winter 2020, Issue 41

Sustain Magazine

No abstract provided.

Determination Of The Type Of Turbines For Use In Restelica 1,2 And 3 Hydropower Plants Based On The Natural Characteristics Of The River, Bukurije Hoxha

UBT International Conference

The focus of this paper describes the designing procedure of Small hydro power plant implemented in Restelica River, Kosovo. For normal operation of the Small hydro power plant, there must be done measurements of the river basin annually water flow, hydraulic net head of water, to calculate sustainability of water flow, flow duration curve, flow rate, configuration units depending on flow rate etc. The choice of the turbines was made depending on head and flow rate of water from which has resulted in the installation of different turbines that have fit better those conditions. The head losses in penstock are …

Human Rights, Environmental Justice, Social Justice, Faith Values And Ethics: Building Stronger Partnerships For The Common Good By Understanding The Differences, Theresa Harris, Leanne M. Jablonski, Sarah Fortner, Malcolm Daniels

Biennial Conference: The Social Practice of Human Rights

Partnerships between human rights practitioners, local communities, scientists, engineers, and health professionals have shown potential to address deeply rooted, systemic human rights concerns. These collaborations are essential for achieving the UN Sustainable Development Goals (SDGs), and for engaging the perspectives and expertise of all constituents. However, even when the individuals in these partnerships or the organizations they represent have common goals, their motivations, analyses, and solutions often come from different perspectives. Members of good will can inadvertently alienate one another when attempting to work together. The fields of human rights, social justice, environmental justice, and ethics have each developed their …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Environmentally Responsible Land Use, Spring/Summer 2010, Issue 22

Sustain Magazine

No abstract provided.

Sustainable Communities, Fall/Winter 2010, Issue 21

Sustain Magazine

No abstract provided.

Sustainable Building, Spring/Summer 2009, Issue 20

Sustain Magazine

No abstract provided.

Environmental History, Fall/Winter 2009, Issue 19

Sustain Magazine

No abstract provided.

Student Research, Spring/Summer 2008, Issue 18

Sustain Magazine

No abstract provided.

Evolving Pollution Prevention, Fall/Winter 2008, Issue 17

Sustain Magazine

No abstract provided.

Climate Change, Spring/Summer 2007, Issue 16

Sustain Magazine

No abstract provided.

Land Conservation, Spring/Summer 2006, Issue 14

Sustain Magazine

No abstract provided.

Green Cities, Spring/Summer 2005, Issue 12

Sustain Magazine

No abstract provided.

Global Sustainability, Fall/Winter 2005, Issue 11

Sustain Magazine

No abstract provided.

Environmental Justice, Spring/Summer 2004, Issue 10

Sustain Magazine

No abstract provided.

Kentucky's Environmental Future, Fall/Winter 2004, Issue 9

Sustain Magazine

No abstract provided.

Urban Ecology, Spring/Summer 2003, Issue 8

Sustain Magazine

No abstract provided.

Urban Regeneration, Fall/Winter 2003, Issue 7

Sustain Magazine

No abstract provided.

Urban Air Quality, Spring/Summer 2002, Issue 6

Sustain Magazine

No abstract provided.

Sustainability Of Industrialized Agriculture, Fall/Winter 2002, Issue 5

Sustain Magazine

No abstract provided.

Urban Design For Environmental Protection, Spring/Summer 2001, Issue 4

Sustain Magazine

No abstract provided.

Stream Restoration, Spring/Summer 2011, Issue 24

Sustain Magazine

No abstract provided.