Engineering Commons^™

Renewable Energy, Fall/Winter 2011, Issue 23

Sustain Magazine

No abstract provided.

Biodiversity, Fall/Winter 2012, Issue 25

Sustain Magazine

No abstract provided.

Active Transportation, Spring/Summer 2012, Issue 26

Sustain Magazine

No abstract provided.

Heat Islands, Fall/Winter 2014, Issue 29

Sustain Magazine

No abstract provided.

Sustainable Behavior, Spring/Summer 2013, Issue 28

Sustain Magazine

No abstract provided.

Campus Sustainability, Spring/Summer 2014, Issue 30

Sustain Magazine

No abstract provided.

Zero Waste, Spring/Summer 2017, Issue 36

Sustain Magazine

No abstract provided.

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite …

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Data

Corresponding data set for Tran-SET Project No. 18CTAM03. Abstract of the final report is stated below for reference:

"Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and …

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Data

Corresponding data set for Tran-SET Project No. 18STUTA01. Abstract of the final report is stated below for reference:

"This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth …

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Publications

This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth specimen. One specimen with ASTM A1035 MMFX high-strength steel rebars, one with high-strength glass fiber reinforced polymer (GFRP) …

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Publications

Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and environmentally friendly alternative than OPC. This research explores methods to develop GPC with desired properties and evaluate their …

Water Productivity In Meat And Milk Production In The Us From 1960 To 2016, Mesfin Mekonnen, C.M.U. Neale, Chittaranjan Ray, Galen E. Erickson, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

Global demand for livestock products is rising, resulting in a growing demand for feed and potentially burdening freshwater resources to produce this feed. To offset this increased pressure on water resources, the environmental performance of livestock sector should continue to improve. Over the last few decades, product output per animal and feedstuff yields in the US have improved, but before now it was unclear to what extent these improvements influenced the water productivity (WP) of the livestock products. In this research, we estimate changes in WP of animal products from 1960 to 2016. We consider feed conversion ratios (dry matter …

A Simulation Tool For Evaluating The Environmental Impacts Of Management Scenarios For Modern Broiler Production Systems, Martin Andrew Christie

Graduate Theses and Dissertations

The purpose of this work is to provide a simulation tool that allows broiler production practitioners and researchers to simulate the effects of farm design and management practices on resource consumption and environmental impacts. This tool allows the user to design unique farms and simulates on farm processes required to raise broiler chicks to a marketable age. The use can input data such as farm location, broiler breed, flock size, ration type, barn dimensions, and climate control equipment specifications. The algorithms used to simulate broiler breed specific feed intake, broiler weight gain, and other on farm processes such as heating, …

Comparison Of Environmental And Social Costs Of Trenchless Cured-In-Place Pipe Renewal Method With Open-Cut Pipeline Replacement For Sanitary Sewers, Vinayak Kaushal

Civil Engineering Dissertations - Archive

The development of underground infrastructure, environmental concerns, and economic trends is influencing society, resulting in the advancement of technology for more efficient, environment-friendly, and cost-effective pipeline installation and renewal. Comparison of environmental and social costs of a pipeline renewal and replacement is an essential element when considering sustainable development of underground infrastructure. Project owners, decision makers, design and consulting and contractors commonly take into consideration the construction costs only, and overlook the environmental and social cost aspects while making a choice between trenchless and open-cut pipeline installation. Trenchless Cured-in-Place Pipe (CIPP) involves a liquid thermoset resin saturated material that is …

Do Grant Funding And Pro-Environmental Spillovers Influence Household Hazardous Waste Collection?, Kustini Lim-Wavde, Robert J Kauffman, Tin Seong Kam, Gregory S. Dawsond

Research Collection School Of Computing and Information Systems

Agency and state grant funding should be disseminated in ways so it will result in better management of household hazardous waste (HHW) and environmental sustainability. Since location seems to matter in HHW collection activities, it is important to consider pro-environmental spatial spillovers that occur, based on agency actions and waste collection behavior taking place in other locations. These may influence HHW-related practices in close-by regions. Using a county-level spatio-temporal dataset that consists of economic, demographic, and HHW data in California from 2004 to 2015, we evaluate the impact of HHW grants on HHW collection activities while considering pro-environmental spillovers. We …

Employing Biomimicry In Urban Metamorphosis Seeking For Sustainability: Case Studies, M. Salim Ferwati, Maryam Alsuwaidi, Arezou Shafaghat, Ali Keyvanfar

Faculty Articles

Objective: The current study has aimed to develop the framework of biomimicry involvement in urban metamorphosis for sustainability. This research has engaged four objectives to achieve the aim. Objective one is to explore the rudiment interaction between human and nature through interrogating history, nature’s design. Objective two is to excavate the biomimicry in emulating nature’s genius. Objective three is to investigate the association between biomimicry and sustainable development, focusing on architectural features. Objective four is to develop the framework based on the biomimicry rules for human evolution and survival in the natural environment. Methodology: To achieve objective one, the grounded …

Viability Of Solar Power On Jobsites, Braden J. Levalley

Construction Management

The use of solar energy has slowly been on the rise over the past few decades, the full potential of solar energy has not been realized in the realm of construction. Solar power in construction has been slow to catch on, as many of the upfront costs associated with solar power has created a feeling that investing in such systems will ultimately not be worth the investment. This paper attempts to address the issues of upfront costs, the willingness for contractors to invest in renewable energy both now and in the future, and will also identify possible uses for solar …

Zero Emission Zero Waste Construction Sites In California Commercial Construction: A Case Study, Joseph E. Anderson

Construction Management

Zero emission refers to the absence of waste products that pollute the environment or disrupt the climate from any engine, motor, process, or other energy source systems. CO2 emissions through equipment and machinery, along with toxic chemicals, carcinogens, ash and dust are founded most common in the Construction Industry. Although these findings may not raise an eyebrow, it is quite overlooked, and the numerical data is staggering. Zero waste is also examined in this paper—the conservation of all resources by means of responsible production, consumption, reuse, recovery of products and materials without burning and with no discharges to land, water, …

Statistical Viability Analysis Of United States Air Force Estimating Cost Factor For Sustainable Construction, Philip A. Ramsey, Diedrich Prigge, Torrey J. Wagner, Alfred E. Thal Jr.

Faculty Publications

Varying legislation and executive orders coupled with needs for energy resiliency have led the United States Air Force (USAF) to pursue sustainable construction. However, the limited understanding of initial costs to implement these changes have contributed to poor project cost estimating, resulting in 62 percent of USAF projects experiencing more than 5 percent cost growth. After reviewing 1628 USAF Military Construction (MILCON) construction projects in 922 category codes (CATCODEs), a twotailed t-test for populations with unequal variance was accomplished on the final normalized contract cost for 340 projects in 16 CATCODEs executed between 2002 and 2017. This analysis provides a …

Systems Analysis For Pet And Olefin Polymers In A Circular Economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, Robert Handler

Michigan Tech Publications, Part 1

Polyethylene terephthalate (PET #1) and polyolefin plastics such polyethylene (HDPE #2, LDPE #4) and polypropylene (PP #5) are major products from the chemical industry, and they comprise a significant fraction of municipal solid waste that ends up in landfills or as litter and marine debris. The reuse of these polymeric materials can be optimized through systems analysis with a view on materials flow analysis, techno-economics, environmental life cycle assessment, and consequential societal impacts. This contribution will present the overall research approach for this exploratory project within the DOE- and industry-funded REMADE Institute and end with a proposed systems analysis framework.

Long Term Performance Monitoring Of Shallow Slope Stabilization Utilizing Recycled Plastic Pins, Cory Alan Rauss

Civil Engineering Theses - Archive

Shallow slope failures are prevalent within the North Texas region. As highway slopes are underlain with high plastic clayey soils that experience cyclic shrinking and swelling, the soils shear strength generally decreases as the soil softens, making the soil more susceptible to sloughing and landslides. The Texas Department of Transportation (TxDOT) generally executes a rapid repair method as an economical option for repairing the slope. This method includes the failed soil removal, replacement, and recompaction to rectify the slope surface. While economical initially, this rapid repair technique may potentially prove to be costly with repeated repairs as the method does …

Sustainable Ground Improvement Method Using Recycled Plastic Pins, Md Nur Basit Zaman

Civil Engineering Dissertations - Archive

Failure of civil engineering infrastructures due to insufficient bearing and shearing capacity of the unsuitable foundation soil is a common problem in the area of North Texas which results in significant maintenance issues for the Texas Department of Transportation (TxDOT). The major concerns regarding construction over such foundation soil includes excessive total and differential settlement of footing resulting in bearing capacity failure and sliding failure of the Mechanically Stabilized Earth (MSE) retaining structure due to inadequate shear resistance. The most common technique followed by TxDOT to counter such problem is to remove and replace the existing soil with appropriate fill …

Dehumidification Water Quality Analysis Of The South Texas Gulf Of Mexico, Erik Esteban Castillo

Theses and Dissertations

This project is to introduce a new methodology for environmental research that analyzes humidity from a water treatment perspective. This is done by using a household dehumidifier, which extracts the excess humidity in a given space, to harvest the samples. The dehumidifier was used outside to act as an Atmospheric Water Generator (AWG), which is the process of extracting water from the atmosphere. When AWG is placed near shoreline, then it's classified as a Desalinated Atmospheric Water Generator (DAWG) since it extracts distilled seawater water-vapors. The methodology for DAWG analyzed turbidity in the humidity on SPI, indicating to meet {<.15} TCEQ turbidity water quality standard. The turbidity also showed to have an adverse relation to weather conditions. There is an open market in research on this topic, where the methodology for DAWG can offer answers. This project identifies DAWG as being a sustainable source of potable water for a municipality.

A Unified Risk-Based Framework For Assessing Sustainability And Resiliency Of Civil Infrastructure, Thomas Adam Robbins

Boise State University Theses and Dissertations

As of February 2019, the National Aeronautics and Space Administration (NASA) has reported since 1880 the average global temperature has increased 1°C, with the warmest year on record being 2016. As the years continue to pass, it is becoming more evident that climate change is occurring, which is known to be a catalyst for climatic weather events. Statistically speaking, these events are more prevalent, and catastrophic exemplified as hurricanes, earthquakes, flooding, and fires. In addition to the increase of potentially catastrophic events, society as a whole has become more conscientious in the use and preservation of natural resources, waste generation, …

Aviation Sustainability, Elizabeth Gemmer

Honors Projects

Sustainability in aviation has become a prominent issue. There is a substantial amount of information on sustainability measures taken and discussed at the local and global levels. However, the information is spread out over a wide array of sources and many people are not aware of what is being done. There have been many past efforts to integrate sustainability into aviation, those efforts continue today and will continue into the future. Aviation is a rapidly growing industry; as the industry grows and there becomes even more of a need for sustainability measures to keep it a viable mode of transport, …

Internal Design Of A Hydroponics Greenhouse For Tri Cycle Farms, Sarah Gould

Biological and Agricultural Engineering Undergraduate Honors Theses

Hydroponics is the agricultural technique of growing plants without soil, using other growing media and added nutrients in a solvent. It is an attractive agricultural method over conventional agriculture because it is more water efficient, is less labor intensive, yields higher quality crops in less time, and is easier to control. According to the Digital Journal, “hydroponics crop value is anticipated to grow to USD 27.29 Billion by 2022 at an estimated CAGR of 6.39% from 2015 to 2020” (Sawant, 2016). Alongside this growing market acceptance for hydroponics, there is also a local demand that requires only a small transportation …

A Discovery Of Social Impact Categories For The Sustainable Design Of Engineered Products And Their Consideration By Industry Professionals, Andrew Taylor Pack

Theses and Dissertations

Sustainable design is often practiced and assessed through the consideration of three essential areas: economic sustainability, environmental sustainability, and social sustainability. For even the simplest of products, the complexities of these three areas and their trade-offs cause decision making transparency to be lost in most practical situations. Additionally, the models and tools available to consider social sustainability are severely underdeveloped. This thesis is separated into three parts: 1) a design tool to consider all three aspects of sustainability simultaneously, 2) a literature survey to characterize social impact as it relates to products, and 3) interviews with engineering professionals regarding how …

Production Of Anti-Corrosion Materials From Uae Date Palm Waste, Nour Shehadeh Abdelrahman

Theses

Palm tree serves as the main source of biomass in the Gulf countries. The United Arab Emirates (UAE) alone is blessed with more than 40 million date palm trees, which generate a huge amount of waste annually. The main objective of this thesis is to examine the ability to produce a corrosion inhibitor from a date palm tree, waste, starting by extracting lignin from different parts of the date palm tree and characterizing the extracted lignin, converting lignin to sodium lignosulfonate, while selecting the optimum condition for the conversion reaction and characterizing the prepared lignosulfonate. Finally, the corrosion efficiency for …

2010 - California Agricultural Vision - Strategies For Sustainability

Miscellaneous Documents and Reports

California is a major contributor to the global food supply and to the national security of the United States. To keep pace with growing demand for food, as the world’s population continues to expand, California agriculture must remain profitable and competitive in a global market by efficiently using resources and controlling production costs. California faces unprecedented challenges to its sustainability in the form of pressures on its profitability and productivity related to water, regulations, labor, invasive species, urbanization and many other factors.