Engineering Commons^™

Case Study: Google’S Unique Canopy Styled Construction, Ray A. Cuevas

Construction Management

In today’s rapidly changing world, builders are pushing to implement more sustainable practices and incorporate innovative techniques to integrate green practices into their structures. One of the latest examples of this push towards sustainability is seen in Google’s new headquarters, Charleston East located in Mountain View, California. Combining their widely known mission to provide a positive work environment for their employees with their passion to be more environmentally friendly, Google has set out to create a Living Building with LEED Platinum certification. In order to accomplish this Google has collaborated with Bjarke Ingels Group, Heatherwick Studio, and Hathaway Dinwiddie. The …

A Case Study On Achieving Living Building Challenge Certification On The Ucsd Triton Project, Grayson Farnham

Construction Management

This paper consists of a case study conducted on the UCSD Triton Pavilion project, In San Diego, California. The general contractor on this project is PCL Construction in contract with LMN architecture. The case study evaluates the strategies proposed to help this progressive design build project achieve a Living Building Challenge certification and the costs that would be associated with such implementations. Research and communication with integral employees from PCL Construction helped identify key strategies that ultimately caused the project to not pursue LBC certification and opt to choose a LEED platinum certification instead. In summary the size and scope …

Atmospheric Water Harvester, Justin K. Lam, Jacob David, Jessica Mabry, Ben Brough

Mechanical Engineering

Atmospheric water harvesting uses the vapor-compression cycle to collect water from the moisture in the air. The system’s components include an evaporator, condenser, compressor, fan, and several expansion valves. Condensate from the air is then funneled into a receptacle, which determines the efficiency of the water harvesting system. For this senior project, the goal is to increase the efficiency of an existing atmospheric water harvester.

Zenneck Waves In Decision Agriculture: An Empirical Verification And Application In Em-Based Underground Wireless Power Transfer, Usman Raza, Abdul Salam

Faculty Publications

In this article, the results of experiments for the observation of Zenneck surface waves in sub GHz frequency range using dipole antennas are presented. Experiments are conducted over three different soils for communications distances of up to 1 m. This empirical analysis confirms the existence of Zenneck waves over the soil surface. Through the power delay profile (PDP) analysis, it has been shown that other subsurface components exhibit rapid decay as compared to the Zenneck waves. A potential application of the Zenneck waves for energy transmission in the area of decision agriculture is explored. Accordingly, a novel wireless through-the-soil power …

Promoting The Sustainable Utilization Of Groundwater Resources In Ethiopia Using The Integrated Groundwater Footprint Index, Xinyu Lin

Honors Scholar Theses

The country of Ethiopia is highly vulnerable to human-caused climate change and is already suffering from the effects. The predominately rural population relies heavily on small-scale agriculture, with 78% of households having at least one member engaged in the field, yet staple crops are highly susceptible to droughts and other weather shocks. Total and agricultural GDP growth in the country have been strongly linked to inter-annual rainfall variability, of which Ethiopia has among the highest in sub-Saharan Africa. A decrease in rainfall since the 1970s has been one of the primary causes of low crop yields, and stresses the immediate …

Design Of A Shallow-Aero Ebb And Flow Hydroponics System And Associated Educational Module For Tri Cycle Farms, Julie Halveland

Biological and Agricultural Engineering Undergraduate Honors Theses

Tri Cycle Farms, whose main mission is to reduce food insecurity in their community, is a non- profit urban farm in Fayetteville, Arkansas. The “Tri” in their name refers to the three parts of their foundation: giving a third of their yield to volunteers, giving a third to local food pantries, and selling a third to sustain the farm and demonstrate the economy of local food production. They want to expand on the third part and have a vision of building a hydroponic greenhouse with the intention that it will create more crops to sell and give, as well as …

Utilization Of Recycled Filament For 3d Printing For Consumer Goods, Alexa Peterson

Apparel Merchandising and Product Development Undergraduate Honors Theses

The 3D printing market has been used in a wide variety of manufacturing industries including textile and apparel. Many consumers can now own a personal 3D printer at home for recreational printing. There are even websites dedicated to 3D printing patterns made by consumers. However, the materials used in the 3D printing process pose a problem for the environment due to their plastic-based nature. 3D printing is a layered process with each layer being printed depending on the layer below it for strength and stability. During the 3D printing process, great amounts of waste are produced as a result of …

An Assessment Of Renewable Energy Technology Implementation In Storrs, Connecticut: Emissions Reduction And Feasibility Of A Microgrid System At Uconn, Sophie Macdonald

Honors Scholar Theses

The purpose of this project is to design a clean energy-sourced microgrid for UConn’s main campus that would reduce the university’s energy emissions while remaining within the geographic boundaries of viable UConn-owned land. Economic cost was not considered in this analysis; instead, emissions and space constraints were the optimized measures of value and feasibility. Sources of energy that were considered include photovoltaics (PV), wind turbines, hydrokinetic systems, and fuel cells. Energy storage capacity was included in the analysis as well. The overall system was optimized first by ignoring space constraints and for a minimum of 10% reduction from the current …

Design Of A Deep Flow Technique Hydroponic System And An Elementary Education Module For Tri Cycle Farms, Cady Rosenbaum

Biological and Agricultural Engineering Undergraduate Honors Theses

Hydroponics is an agricultural technique in which plants are grown without soil and are instead grown in water systems that include nutrients and other growth-supporting media. Hydroponic systems typically reside inside, so that the system can be fully controlled by the grower by manipulating the temperature and amount of light the plants receive. The benefits of growing plants using hydroponics include: the amount of water used is reduced, it is less labor to grow organic produce with an indoor system, less space used, and it allows for growing food anywhere. Tri Cycle Farms is planning for the construction of a …

Extending Water Resources Performance Metrics To River Ecosystems, Belize A. Lane, J. Pablo Ortiz-Partida, Samuel Sandoval-Solis

Civil and Environmental Engineering Faculty Publications

A persistent challenge in integrated water management is the ability to accurately evaluate human and ecological tradeoffs. Two-dimensional (2D) hydraulic models are frequently used to evaluate water management alternatives concerning aquatic species physical habitat needs or preferences. Recent studies have assessed the timing or duration of suitable habitat conditions, but no standardized approach exists to integrate and interpret ecohydraulic model outputs within a water management framework. Such an approach is needed to maximize the information obtained from model outputs and to facilitate communication between river scientists and water managers. This study presents a general framework to aggregate and summarize 2D …

Novel Methods For Composites Recycling Via Pyrolysis, Matt Jacobs

Undergraduate Honors Theses

Composites are unique materials in many respects. When fabric woven from carbon fibers is joined with a thermoset resin in a controlled environment, it results in a very strong material, especially evaluated on a pound-for-pound basis against metals and ceramics. One aspect of this construction that provides great strength lies in the fiber-matrix adhesion which facilitates load transfer to the reinforcement of the composite. This fiber-matrix adhesion is promoted by the polarity of the usual thermoset matrices, and properly designed sizing materials coating the fibers. It’s a two-edged sword, though. Although the resin and the fibers are quite strong together, …

Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement In Commerical Construction, Brandon A. Sturla Bs

Construction Management

The purpose of this paper is to look at more sustainable alternative options for concrete use for California Commercial Contractors. This paper will analyze the more sustainable options for concrete and come to conclusions on how effective the alternative options are for protecting the environment, encouraging sustainability, maintaining cost effectiveness, and maintaining efficiency in building. This paper provides data on the negative impact concrete use has had on the environment and potential ways to alleviate this. This paper will also analyze how cost-effective the alternative options are to see if the alternative options are realistic and affordable to use in …

Optimizing The Environmental And Economic Sustainability Of Remote Community Infrastructure, Jamie E. Filer, Justin D. Delorit, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Remote communities such as rural villages, post-disaster housing camps, and military forward operating bases are often located in remote and hostile areas with limited or no access to established infrastructure grids. Operating these communities with conventional assets requires constant resupply, which yields a significant logistical burden, creates negative environmental impacts, and increases costs. For example, a 2000-member isolated village in northern Canada relying on diesel generators required 8.6 million USD of fuel per year and emitted 8500 tons of carbon dioxide. Remote community planners can mitigate these negative impacts by selecting sustainable technologies that minimize resource consumption and emissions. However, …

Development Of A Quality Control Method And Guidelines For Hot Mix Asphalt Using Recycled Concrete Aggregate, Xiaojun Li, Dingxin Cheng, Kun Zhang, Kanwar M. S. Jakhar, Uday V. Pericherla

Mineta Transportation Institute

Each year, about 122 million tons of aggregates, a major structural component of pavement, are used in asphaltic mixtures in pavement construction. At the same time, aging U.S. infrastructure produces around 200 million tons of demolition waste each year, half of which is concrete debris. Therefore, introducing recycled concrete aggregate (RCA) as hot mix asphalt (HMA) aggregate could not only relieve the disposal pressure but also result in considerable reductions in cost, energy usage, and greenhouse gas emissions in the paving industry. A limited number of studies regarding the use of RCA to substitute virgin aggregate in HMA (RCA-HMA) exist. …

Performance Evaluation Of Lightweight Normal And Geopolymer Foamed Concrete Using Palm Oil Fuel Ash As Partial Replacement Of Binder, M .E. Alnahhal Ahmed

Student Works (2020-2029)

Carbon dioxide (CO2) emissions from Ordinary Portland Cement (OPC) have a detrimental effect on the environment and this had led many researchers to search for other alternatives in the form of sustainable cementitious materials. The depletion of natural resources and dumping the industrial by-products and waste materials are serious concern to our environment. This research focusses on the performance of using a palm oil industrial by-product, namely, palm oil fuel ash (POFA), as a partial replacement for OPC and fly ash (FA) in lightweight normal foamed concrete and lightweight geopolymer foamed concrete, respectively. Thus, using 10, 20, and 30% POFA …

Adaptable Clean Energy Laboratory, Joao Marcelo Rocha Belmonte, Marc D. Compere

Sustainability Conference

The Adaptable Clean Energy (ACE) Lab is a real-world, long term, test platform that will guide the courses of the Energy Systems track. The lab will provide realistic electrical and HVAC loads that mimic a solar powered office. The lab is a 20’ high cube shipping container modified with a door, windows, lights computers, air conditioner and appliances. The lab is Net-Zero and powered entirely from the sun. Two insulation test sections expose the exterior walls for research access to real external heat loads in a real building

Teaching Across Disciplines: A Case Study Of A Project-Based Short Course To Teach Holistic Coastal Adaptation Design, Pamela K. Judge, Jane A. Buxton, Thomas C. Sheahan, Eleanor R. Phetteplace, David L. Kriebel, Elisabeth M. Hamin Infield

Engineering, Computing & Construction Management Faculty Publications

Climate change has led to the need for innovation in resilient infrastructure and the social policies which will support those. This requires greater interdisciplinary interactions and knowledge building among emerging professionals. This paper presents a case study of a pilot short course intended to immerse graduate students in the design of resilient infrastructure using place-based and interdisciplinary active team learning. This course helps graduate students bridge the gap between research and practice on the social science and engineering of resilient infrastructure for coastal adaptation. The intellectual framework for the course (the Adaptive Gradients Framework) provides a holistic evaluation of adaptation …

Covid-19 And Public Transportation: Current Assessment, Prospects, And Research Needs, Alejandro Tirachini, Oded Cats

Journal of Public Transportation

The COVID-19 pandemic poses a great challenge for contemporary public transportation worldwide, resulting from an unprecedented decline in demand and revenue. In this paper, we synthesize the state-of-the-art, up to early June 2020, on key developments regarding public transportation and the COVID-19 pandemic, including the different responses adopted by governments and public transportation agencies around the world, and the research needs pertaining to critical issues that minimize contagion risk in public transportation in the so-called post-lockdown phase. While attempts at adherence to physical distancing (which challenges the very concept of mass public transportation) are looming in several countries, the latest …

Understandings Of "Global Responsibility’ Expressed By Civil Engineers Working In London, Shannon Chance, Inez Direito, J. Mitchell

Conference papers

This paper discusses the term ‘global responsibility’, how it emerged and why, and analysis of interview data collected from nine civil engineers working in London regarding their understandings of the term. Professional Bodies often take the lead in envisioning change, by identifying the direction their professionals should take to help address society’s evolving needs and aspirations. Often, such Bodies charge academia with addressing society’s evolving needs through research, outreach, and preparing the next generation of professionals. In the UK, leaders in civil engineering have pressed for individual and collective action to facilitate sustainable development and decrease occurrence of corruption. Nevertheless, …

Zips Precious Plastics: Plastic Extruder, Patrick Cole

Williams Honors College, Honors Research Projects

This project's goal was to design and build an affordable desktop filament extruder that can precisely and consistently extrude filament to a certain tolerance acceptable for 3D printers using wasted printing material. The group is partnering with an on campus organization focusing on engineering applications for sustainable futures. Zips Precious Plastics is a student run design group that intends to bring an innovation space on campus to help educate students about the importance of a closed looped system within plastic manufacturing.

Internet Of Things For Environmental Sustainability And Climate Change, Abdul Salam

Faculty Publications

Our world is vulnerable to climate change risks such as glacier retreat, rising temperatures, more variable and intense weather events (e.g., floods, droughts, and frosts), deteriorating mountain ecosystems, soil degradation, and increasing water scarcity. However, there are big gaps in our understanding of changes in regional climate and how these changes will impact human and natural systems, making it difficult to anticipate, plan, and adapt to the coming changes. The IoT paradigm in this area can enhance our understanding of regional climate by using technology solutions, while providing the dynamic climate elements based on integrated environmental sensing and communications that …

Design Of Subsurface Phased Array Antennas For Digital Agriculture Application, Abdul Salam

Faculty Publications

With the advancement in subsurface communications technology, an overarching solution to a underground phased array antenna design for digital agriculture requires interdisciplinary research involving topics ranging from insights on the constitutive parameters of the soil medium and impact of soil moisture on the array factor to antenna measurements and subsurface communication system design. In this paper, based on the analysis of underground radio wave propagation in subsurface radio channel, a phased array antenna design is presented that uses water content information and beam steering mechanisms to improve efficiency and communication range of wireless underground communications. It is shown the subsurface …

Internet Of Things For Sustainable Community Development: Introduction And Overview, Abdul Salam

Faculty Publications

The two-third of the city-dwelling world population by 2050 poses numerous global challenges in the infrastructure and natural resource management domains (e.g., water and food scarcity, increasing global temperatures, and energy issues). The IoT with integrated sensing and communication capabilities has the strong potential for the robust, sustainable, and informed resource management in the urban and rural communities. In this chapter, the vital concepts of sustainable community development are discussed. The IoT and sustainability interactions are explained with emphasis on Sustainable Development Goals (SDGs) and communication technologies. Moreover, IoT opportunities and challenges are discussed in the context of sustainable community …

Internet Of Things In Agricultural Innovation And Security, Abdul Salam

Faculty Publications

The agricultural Internet of Things (Ag-IoT) paradigm has tremendous potential in transparent integration of underground soil sensing, farm machinery, and sensor-guided irrigation systems with the complex social network of growers, agronomists, crop consultants, and advisors. The aim of the IoT in agricultural innovation and security chapter is to present agricultural IoT research and paradigm to promote sustainable production of safe, healthy, and profitable crop and animal agricultural products. This chapter covers the IoT platform to test optimized management strategies, engage farmer and industry groups, and investigate new and traditional technology drivers that will enhance resilience of the farmers to the …

Internet Of Things For Sustainable Human Health, Abdul Salam

Faculty Publications

The sustainable health IoT has the strong potential to bring tremendous improvements in human health and well-being through sensing, and monitoring of health impacts across the whole spectrum of climate change. The sustainable health IoT enables development of a systems approach in the area of human health and ecosystem. It allows integration of broader health sub-areas in a bigger archetype for improving sustainability in health in the realm of social, economic, and environmental sectors. This integration provides a powerful health IoT framework for sustainable health and community goals in the wake of changing climate. In this chapter, a detailed description …

Internet Of Things For Water Sustainability, Abdul Salam

Faculty Publications

The water is a finite resource. The issue of sustainable withdrawal of freshwater is a vital concern being faced by the community. There is a strong connection between the energy, food, and water which is referred to as water-food-energy nexus. The agriculture industry and municipalities are struggling to meet the demand of water supply. This situation is particularly exacerbated in the developing countries. The projected increase in world population requires more fresh water resources. New technologies are being developed to reduce water usage in the field of agriculture (e.g., sensor guided autonomous irrigation management systems). Agricultural water withdrawal is also …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Internet Of Things In Water Management And Treatment, Abdul Salam

Faculty Publications

The goal of the water security IoT chapter is to present a comprehensive and integrated IoT based approach to environmental quality and monitoring by generating new knowledge and innovative approaches that focus on sustainable resource management. Mainly, this chapter focuses on IoT applications in wastewater and stormwater, and the human and environmental consequences of water contaminants and their treatment. The IoT applications using sensors for sewer and stormwater monitoring across networked landscapes, water quality assessment, treatment, and sustainable management are introduced. The studies of rate limitations in biophysical and geochemical processes that support the ecosystem services related to water quality …

Optimization Study Of A Combined Wind-Solar Farm For A Specified Demand, Venkat Siddhartha Rama

Browse all Theses and Dissertations

At the present time, using wind and solar energy for producing electricity in the United States is becoming cost competitive. According to Lazard’s 2019 [36] levelized cost of energy (LCOE) analysis of a number of energy sources used for producing electricity in the United States, wind and solar are cheaper than natural gas and coal. While capital, maintenance, operation, and fuel costs are included in LCOE numbers, energy source intermittency is not. Intermittency is an important issue with wind and solar energy sources, but not with natural gas or coal energy sources. Combining wind and solar energy sources into one …

Systems Analysis For Sustainability Assessment Of Biogas And Bio-Ch4 Production From Food Waste And Dairy Manure Mixtures In The Us, Sharath Kumar Ankathi

Dissertations, Master's Theses and Master's Reports

The purpose of the dissertation is to relate systems analysis for bioenergy to identify optimum configurations for improved scenarios and to make better decisions in a systems perspective.

Chapter 1 is a review of the literature to identify the state of the knowledge in terms of systems analysis for anaerobic digestion (AD) bioenergy systems. The key outcomes from this review showed that anaerobic digestion of mixtures of food waste and animal manure has great potential to achieve economic and environmental benefits compared to other treatments of organic waste materials, such as landfilling or conventional manure management.

Chapter 2 focuses on …