Engineering Commons^™

Addition Of Exothermic Reaction Scale-Up Lab To Unit Operations Curriculum., Lisa A Anderson

Electronic Theses and Dissertations

According to the Chemical Safety Board’s 2002 report entitled "Improving Reactive Hazard Management,” the CSB identified 167 serious accidents involving uncontrolled chemical reactions in the United States between 1980 and 2001 causing 108 deaths and hundreds of millions of dollars in property damage. Of the 167 accidents, 35% involved runaway reactions. One noteworthy incident from recent history is the fatal explosion that occurred at T2 Laboratories in Jacksonville, FL as a result of improper scale-up and an insufficient cooling design for the system.

One recommendation resulting from the CSB investigation of the incident was that the Accreditation Board for Engineering …

Using The Soar Approach To Teach Middle School Students About Math And Science Concepts Found In Engineering, Rachael A. Wagner

Honors Program: Senior Projects (Public)

In order to address the lack of knowledge about the engineering profession in middle-level students, the project described in this Honors Thesis was developed. Through the creation of an afterschool program centered on engineering, students were able to apply the math and science concepts covered to design, build, and test a bridge. One particular lesson from this after-school program was highlighted in this thesis, the lesson covering the Pythagorean Theorem, to demonstrate the use of SOAR methodology in the lesson’s development and later use in the classroom. The effectiveness of the Pythagorean Theorem lesson was evaluated positively based on the …

Promoting Mathematics Education In Dual-Language Education Programs In Spanish Towards A Growing Understanding Of Engineering, Marialuisa Di Stefano, Idalis Villanueva

Engineering Education Faculty Publications

This work addresses the lack of a national guidance for the integration of mathematics and engineering in the Dual Language Education (DLE) programs in Spanish. Participants will learn about the impact of DLE programs on Latina/o students, and explore potential guidelines and strategies to implement mathematics and engineering in DLE schools. Educators and program developers, advocating for the integration of STEM knowledge in DLE programs in their district(s)/school(s), would particularly benefit from this session.

Poster: Institutional Barriers To Black And Latino Male Collegians' Success In Engineering And Related Stem Fields, Leroy L. Long Iii, Trevion S. Henderson

Publications

Diverse people and perspectives are needed to spur innovation and tackle societal problems. A wealth of untapped intellectual and economic potential exists among historically underrepresented racial/ethnic groups –including Blacks and Latinos–who have not had equitable access to engineering and related STEM fields. For Blacks and Latinos who are accepted into engineering and related STEM fields, they face a number of barriers to their success which lead to low retention and graduation rates. In historically male-dominated fields such as engineering and related STEM disciplines, Black and Latino men have remained underrepresented at the student and faculty ranks. To uncover and tackle …

A Constructivist Approach To The Use Of Case Studies In Teaching Engineering Ethics, Diana Adela Martin, Eddie Conlon, Brian Bowe

Articles

Our paper aims to explore the effectiveness of a constructivist approach to the teaching of engineering ethics through case studies, by putting forward a contextualization of the much discussed case study “Cutting Road Side Trees” (Pritchard, 1992) in light of the constructivist frame suggested by Jonassen (1999). First, we briefly analyse how the use of case studies for the teaching of engineering ethics eludes the complexity of the engineering professional environment before arguing that constructivism is a learning theory that can help to address this complexity. The final section proposes a constructivist reworking of the case method in a manner …

The Impact Of Functional Modeling On Engineering Students' Mental Models, Jacob T. Nelson

Senior Honors Projects, 2010-2019

The ability to understand complexity and think holistically about systems is an increasingly important part of engineering design. This is embodied in the concept of systems thinking, a concept studied primarily in the fields of systems dynamics and systems engineering. Systems thinking ability is built off mental models, a loosely-defined construct people form to make predictions about their surroundings. Methods to evaluate systems thinking and underlying mental models rely primarily on self-evaluative methods such as questionnaires, or detailed simulations of systems or processes; however these methods fail to directly capture students’ design tendencies. This work presents a visual instrument used …

Fostering Giftedness And Creativity: Implementing Engineering By Design In Kuwait, Nathan Mentzer, Philip A. Reed, Meshari Alnouri, Mohammad Barbarji

STEMPS Faculty Publications

The article offers information on a partnership between the International Technology & Engineering Educators Association (ITEEA) and the Sabah Al Ahmad Center for Giftedness and Creativity (SACGC) to support innovation and design education. The partnership is aimed towards the implementation of the Engineering byDesign (EbD) curriculum and contribute towards building a Kuwaiti society that fosters giftedness and creativity.

Kinesthetic Learning Experience Simulation Using An Online Intervention To Improve Hands-On Ability, David Leach

Dissertations, Master's Theses and Master's Reports

Students enrolled in mechanical and manufacturing engineering programs employ differing levels of mechanical aptitude and practical hands-on ability. Many students lack practical experience tinkering with mechanical devices and mechanisms prior to entering their post-secondary years. Student attention spans in traditional classroom environments appear to be decreasing with the ever-increasing addiction to immediate gratification provided by electronic devices, gaming software, and social media platforms. The question is then raised whether or not modern engineering students have the ability to improve mechanical aptitude by simulating a kinesthetic or tactile learning experience through an online tutorial. This project describes the development and testing …

Celebrating 20 Years Of The Exceed Teaching Workshop, Allen C. Estes, Stephen J. Ressler P.E., Camilla M. Saviz P.E., Brock E. Barry, Carol L. Considine, Dion Coward, Norman D. Dennis Jr., P.E., Scott R. Hamilton P.E., David S. Hurwitz, Tanya Kunberger P.E., Thomas A. Lenox, Tonya Lynn Nilsson, Leslie Nolen Cae, James J. O'Brien Jr., Robert James O'Neill, David A. Saftner, Kelly Salyards P.E., Ronald W. Welch P. E.

Engineering Technology Faculty Publications

In response to the clear need for faculty training, the American Society of Civil Engineers (ASCE) developed and funded Project ExCEEd (Excellence in Civil Engineering Education) which is celebrating its twentieth year of existence. For the past two decades, 38 ExCEEd Teaching Workshops (ETW) have been held at six different universities. The program has 910 graduates from over 267 different U.S. and international colleges and universities. The ExCEEd effort has transformed from one that relied on the grass roots support of its participants to one that is supported and embraced by department heads and deans. This paper summarizes the history …

Implementation Of Systems-Level Learning In A Community College Mechatronics Program, Margie N. Porter

Graduate Research Theses & Dissertations

This is a qualitative case study of the complete implementation of systems-level learning (SLL) pedagogy throughout a mechatronics engineering department in a community college in the United States. SLL was developed from the German engineering apprenticeship model, resulting in engineering graduates with what our German counterparts call Handlungskompetenz. Graduates of these programs have the flexibility to quickly adapt to new engineering systems and situations in a self-directed way without months of on-the-job training. This skill is related to adaptive expertise and is not the type of skill traditionally taught to engineering students.

Chronological and descriptive analyses were performed on semi-structured …

Entrepreneurial Mindset: Integrating Creative Thinking And Innovation Into A Graphical Communications Course, Leroy Long Iii, Lulu Sun

Publications

Nationwide, leaders in business and industry have increasingly acknowledged the importance of entre¬preneurship. Several areas of the country showcase the importance of entrepreneurship such as Silicon Valley in California where a large number of start-up companies in science, technology, engineering and math (STEM) fields are located. To meet the needs of business and industry, institutions of higher educa¬tion prepare students for future employment by offering rigorous and relevant coursework in areas such as entrepreneurship. Collegiate faculty and staff can use fundamental engineering courses to instill an en¬trepreneurial mindset – a set of beliefs, attitudes, and behaviors that drive innovation – …

Supporting Mechanistic Reasoning In Domain-Specific Contexts, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Mechanistic reasoning is an epistemic practice central within science, technology, engineering, and mathematics disciplines. Although there has been some work on mechanistic reasoning in the research literature and standards documents, much of this work targets domain-general characterizations of mechanistic reasoning; this study provides domain-specific illustrations of mechanistic reasoning. The data in this study comes from the Assessment of Mechanistic Reasoning Project (AMRP) (Weinberg, 2012), designed using item response theory modeling to diagnose individuals’ mechanistic reasoning about systems of levers. Such a characterization of mechanistic reasoning illuminates what is easy and difficult about this form of reasoning, within the subdomain of …

Into The Deep: The Role Of Paradigms In Understanding Engineering Education For Sustainable Development, Iacovos Nicolaou, Eddie Conlon, Brian Bowe

Articles

This article presents summary findings of a mixed methods research project exploring the provision of education for sustainable development (SD) in seven Irish engineering degree programmes. Drawing on Sterling’s (2004) iceberg metaphor and Critical Realism it seeks to identify the underlying socio-cultural barriers preventing a holistic integration of SD in engineering education. It argues that the current focus is predominantly on the environmental dimension of SD and that there are a set of reinforcing mechanisms facilitating the provision of disciplinary education aimed at producing technically proficient, employable graduates in which the social dimension of SD is marginalised. This is underwritten …

The Design And Implementation Outcome Of An Online Undergraduate Thermodynamics Class, Dazhi Yang, Krishna Pakala

Educational Technology Faculty Publications and Presentations

Online learning is not common for most undergraduate core engineering courses. However, the growing need for online engineering courses necessitates the design and delivery of online courses that can allow for the flexibility and convenience the distance learning experiences can offer. Thermodynamics is among the most difficult engineering subjects to teach, especially online, where instructors are unable to demonstrate the overwhelming number of equations and applications as they would in face-to-face lectures. This paper describes the design and development of an online, undergraduate thermodynamics class. It reports the implementation outcome of student final course grade and the students’ learning experience …

An Investigation Of Elementary Teachers<'> Self-Efficacy For And Beliefs About The Importance Of Engineering Education, Khristen Lee Massic

Theses and Dissertations

In order for the United States to regain its global standing in science and engineering, educational and governmental organizations have started to re-emphasize science, technology, engineering, and math content in k-12 classrooms.While some preliminary research has been conducted on student and teacher perceptions related to engineering, there has been little research conducted related to teachers beliefs about the importance of engineering content in their classrooms and relatively few studies have investigated elementary teachers teaching engineering self-efficacy. Current studies have investigated the impact of professional development on teachers teaching engineering self-efficacy but these studies were conducted with limited sample sizes, for …

Hidden Curriculum, Language, And Math: How To Help Emergent Bilinguals To Succeed In Stem, Marialuisa Di Stefano, Idalis Villanueva

Engineering Education Faculty Publications

No abstract provided.

Hidden Players Of Ethical Mentoring For Women Graduate Students In Science And Engineering, Laura Gelles, Idalis Villanueva, Marialuisa Di Stefano

Engineering Education Faculty Publications

The relationship a graduate student and their research advisor have while they work together in academia is pivotal to the development and success of the research and involved parties (Polson, 2003). Students rely on their advisor to guide them through the academic and research process while also being a role model of professional and ethical behavior (Johnson, 2016; King, 2003). In essence, a research advisor must accept the trust and confidence of the graduate student to act in their best interest by following ethical mentoring principles. However, if the advisor is unaware of the best interest of their students or …

Mathematical Description And Mechanistic Reasoning: A Pathway Toward Stem Integration, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Because reasoning about mechanism is critical to disciplined inquiry in science, technology, engineering, and mathematics (STEM) domains, this study focuses on ways to support the development of this form of reasoning. This study attends to how mechanistic reasoning is constituted through mathematical description. This study draws upon Smith’s (2007) characterization of mathematical description of scientific phenomena as ‘‘bootstrapping,’’ where negotiating the relationship between target phenomena and represented relations is fundamental to learning. In addition, the development of mathematical representation presents a viable pathway towards STEM integration. In this study, participants responded to an assessment of mechanistic reasoning while cognitive interviews …

Transitioning To Sustainable Civil Infrastructure Systems: Green Stormwater Management And Engineering Design Thinking, Carli Denyse Flynn

Dissertations - ALL

Green infrastructure has been endorsed by many practitioners and organizations as a more sustainable approach to stormwater management. Decisions on how to best design municipal green infrastructure systems can be complicated by factors such as uncertainties about the performance and public acceptance of particular technologies. Thus, deciding how to design sustainable stormwater management systems requires engineers not only to reflect upon the fundamental principles used to conceptualize their designs, but also to consider how a broad array of social, economic, and environmental factors both influence and are influenced by their work.

This thesis examines factors that influence the design and …

Undergraduate Engineers And Teachers: Can Students Be Both?, Malinda S. Zarske, Maia L. Vadeen, Janet Y. Tsai, Jacquelyn F. Sullivan, Denise W. Carlson

Journal of Pre-College Engineering Education Research (J-PEER)

Today’s college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of engineering undergraduate students at the University of Colorado Boulder in November 2012 indicated a desire by students to simultaneously pursue secondary teacher licensure alongside their engineering degrees: 25 percent ‘‘agreed’’ or ‘‘strongly agreed’’ that they ‘‘would be interested in earning grades 7–12 science or math teaching licenses while [they] earn [their] engineering …

Board # 114 : Progress Toward Optimizing Student Team Skill Development Using Evidence-Based Strategies, Matthew W. Ohland, Daniel M. Ferguson, Misty L. Loughry, David Jonathan Woehr

School of Engineering Education Faculty Publications

The broad goal of this work is to study the effectiveness of various teamwork training interventions. This research requires the use of a common model of teamwork and a system for training, collecting ratings data, and providing feedback. We will leverage the NSF’s prior investment in the CATME system, which meets the research criteria and automates some of the data collection and feedback, which will aid in executing the research protocol consistently. Seven empirical studies will determine the effect sizes of training, practice in teams, practice rating, and feedback interventions on cognitive development (improvement of team skills) and metacognitive development …

Collaborative Research: Ehr Core: Exploring The Emotional And Motivational Lives Of Undergraduate Engineering Students, Idalis Villanueva

Funded Research Records

No abstract provided.

Reducing Costs While Maintaining Learning Outcomes Using Blended, Flipped, And Mastery Pedagogy To Teach Introduction To Environmental Engineering, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As part of a cost-savings initiative, an existing course of 'introduction to environmental engineering' offered using a 'traditional' format of didactic class meetings supplemented with hands-on laboratory sessions, was changed significantly. The 'modified' format uses 'blended', 'flipped', and 'mastery' approaches to teach "2601: Fundamentals of Environmental Engineering" to approximately 60 sophomores pursuing baccalaureate degrees in environmental, civil, or architectural engineering, each semester. This paper presents a summary of the results from eight course offerings over a period of four years to more than 450 total students. Assessments included student grades; open-ended invitations for anonymous feedback at the end of each …

Cannons To Spark Thermal-Fluid Canons, Francis M. Haas, Nicholas W. Dow, Thomas L. Merrill, Smitesh Bakrania

Henry M. Rowan College of Engineering Departmental Research

Hands-on projects are launch pads for sparking student interest. Specifically, design-build-test (DBT) projects can be effective tools for boosting students’ confidence in their ability to apply theoretical knowledge to practical engineering. Recognizing the need for relating the theoretical aspects of thermodynamics to its application, an air cannon design-build-test project was envisioned and implemented.

Air cannons can be simple and inexpensive to construct, while offering a robust platform to explore thermodynamics, heat transfer, and fluid mechanics concepts. At the same time, the ability to launch projectiles from the cannons carries an obvious appeal for many students. An air cannon design project …

Diplomacy Lab Provides Term-Length Group Projects Integrating Policy Analysis And Liberal Arts Into The Traditional Engineering Classroom, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Science in diplomacy, the use of trained scientist to inform and support foreign policy objectives, has been a part of U.S. foreign policy since the time of Benjamin Franklin. The Diplomacy Laboratory project, a public-private partnership, allows the Department of State to 'course source' projects to seek input from universities and to recruit talented students to consider careers in diplomacy. This paper provides a summary of a case study using a DipLab project as part of a term-length, writing assignment in courses for undergraduate and graduate environmental engineering students. An overview of DipLab and suggested best practices to integrate DipLab …

Using Nursing Theory To Improve The Teaching Of Engineering Practice, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineering education includes both classroom training in sciences and professional skills as well as learning-through-doing to integrate practice and engineering design into the future licensed Professional Engineer (PE). In a similar manner, nursing education includes both classroom training in sciences and professional skills as well as learning through doing to integrate practice and caring into the future licensed Registered Nurse (RN). From the mid-19th century until modern day, the fields of environmental engineering and community health nursing have worked side-by-side to prevent disease while promoting health and wellness. This paper provides a synthesis of previously published case studies by the …

Engaging Children In Engineering Design Through The World Of Quadcopters, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim

Faculty Publications

The interest in engineering education for K-12 students has been rising (Carr, Bennett IV, & Strobel, 2012; Strimel, Grubbs, & Wells, 2016), and the importance of engineering education is discussed as early as the elementary school level (Hegedus, 2014). Petroski (2003) claims that children are ready to learn engineering because their play activities are similar to engineering and design activities, such as making, moving, and rearranging things. Studies have examined how elementary school students perceive engineering or engineers (Cunningham, Lachapelle, & Lindgren-Streicher 2005) and found that elementary-aged students associated engineering with repairing, installing, driving, constructing, and improving machines and devices. …

Designing The Technological World Through Biomimicry, Emily Yoshikawa, Greg J. Strimel, Scott R. Bartholomew

Faculty Publications

Scientific discoveries are a driver for advancing our technological world (ITEA/ITEEA; 2000/2002/2007). As more knowledge is acquired through scientific inquiry, people can better design and develop technological inventions and innovations (Knowles, Kelley, & Hurd, 2016). In turn, these novel technologies can aid in making new scientific discoveries, thus driving an ongoing cycle of technological advancement. However, in the process of designing and advancing our technological world, people can turn to the study of life and its phenomena to inspire and inform their designs. Nature is functional as well as beautiful. As we study the phenomena or functions of living organisms …

Editorial: The Journal Of Stem Arts, Crafts, And Constructions As An Ideal Venue For Showcasing Application Of The Next Generation Science Standards, Dana L. Atwood-Blaine

Journal of STEM Arts, Crafts, and Constructions

The Journal of STEM Arts, Crafts, and Constructions is an ideal venue for disseminating new ideas, lessons, and research developed in response to the Next Generation Science Standards (NGSS). This editorial explains how arts integration is well-suited to addressing the Science and Engineering Practices and the Cross-cutting Concepts. The research articles in this issue provide evidence that arts integration is also effective at improving student retention of disciplinary content over time. Using specific examples from the articles in this issue, this editorial elaborates on the three-dimensional nature of NGSS and how the integration of arts, crafts, and constructions into science …

Poster: Lessons Learned From Successful Black Male “Buoyant Believers” In Engineering And Engineering-Related Fields, Leroy L. Long Iii, Trevion S. Henderson

Publications

In high-demand fields like science, technology, engineering and mathematics (STEM), more success strategies are needed to effectively recruit and retain college students. One-size fits-all approaches (i.e., those that are supposed to work for all students) often neglect the unique needs of underrepresented populations. Although some strategies exist for helping minority students succeed in STEM, the present investigation uncovered detailed information about how Black male students in engineering and engineering-related fields develop important academic traits such as confidence and resilience. To add to the limited body of literature on Black males in STEM, interview data from 27 Black male students majoring …