Engineering Commons^™

Why Do I Have To Know This? Engineering In A Globalized Society, Caleb Cunningham

Honors Theses

Through a pilot comparative study, this thesis examines the problem-solving of chemical engineering students and chemical engineering faculty. Specifically, the thesis examines the extent to which individuals include global factors (cultural, social, environmental, and economic) into their engineering solutions as specified by ABET. Several hypotheses were investigated in this pilot study: (i) having a study abroad experience would increase the likelihood that participants included the global factors of interest, (ii) the type (PUI, Research Intensive, Unique) of institution students attended would impact how individuals approached the problem, (iii) students with similar career aspirations would approach the problems similarly, (iv) having …

Assessing The Impact Of Ires On Researchers, Research Outcomes, And Students: A Case Study Approach, David B. Knight, Nicole Sanderlin, Kirsten A. Davis

School of Engineering Education Faculty Publications

IRES programs seek to develop globally connected future researchers while also facilitating broader long-term collaborations between U.S.-based and international research groups. Faculty and student exchanges are expected to result in international linkages between the researchers that bring new insights and methods to U.S.-based research projects, leading to transformative research. In this project, we conducted a comprehensive evaluation of IRES programs through a case study analysis. The nine selected cases focused specifically on engineering-focused IRES experiences for ease of comparison. Case studies included interviews with all U.S. PI’s, a selection of additional international and U.S. faculty researchers, and select student alumni …

Do After-School Robotics Programs Expand The Pipeline Into Stem Majors In College?, Cathy Burack, Alan Melchior, Matthew Hoover

Journal of Pre-College Engineering Education Research (J-PEER)

One result of the growing concerns over the numbers of young people moving into science, technology, engineering and mathematics (STEM)-related careers has been the expansion of formal and informal STEM education programming for pre-college youth, from elementary school through high school. While the number of programs has grown rapidly, there is little research on their long-term impacts on participant education and career trajectories. This paper presents interim findings from a multi-year longitudinal study of three national after-school robotics programs that engage students in designing, building, and competing complex robots with the goal of inspiring long-term interest in STEM. Focusing on …

Redefining Power In The Engineering Classroom | College Of Engineering, Utah State University

College of Engineering News

Secrets are not welcome in Idalis Villanueva’s engineering classroom. She doesn’t believe in withholding information or making assumptions about what students may or may not know. On day one, she asks students to refer to her as Dr. Villanueva or Dr. V; she clearly posts assignment due dates; she lists the objectives of each lesson; and she clarifies uncommon terms to make sure everyone is on the same page. This seemingly basic approach to instruction is nothing new, but emerging research suggests it is crucial to the success of would-be engineers.

Argument-Driven Engineering In Middle School Science: An Exploratory Study Of Changes In Engineering Identity Over An Academic Year, Lawrence Chu, Victor Sampson, Todd L. Hutner, Stephanie Rivale, Richard H. Crawford, Christina L. Baze, Hannah S. Brooks

Journal of Pre-College Engineering Education Research (J-PEER)

The goal of this study was to examine how the use of a new instructional model is related to changes in middle school students’ engineering identity. The intent of this instructional model, which is called argument-driven engineering (ADE), is to give students opportunities to design and critique solutions to meaningful problems using the core ideas and practices of science and engineering. The model also reflects current recommendations found in the literature for supporting the development or maintenance of engineering identity. This study took place in the context of an eighth-grade science classroom in order to explore how middle school students’ …

Teaching Wind Energy To Engineering And Education Undergraduates Through Community Engagement, Maija A. Benitz, Li-Ling Yang

Engineering, Computing & Construction Management Faculty Publications

Rhode Island's adoption of the Next Generation Science Standards in 2013 [1] established a pressing need to provide elementary schools with support for integrating engineering in our local district's classrooms. Wind energy was identified as an appropriate instructional topic, both for its relevance to Rhode Island [2], and for its strength as a tool for studying the engineering design process. Education and engineering undergraduates collaborated to educate local fourth graders about engineering design and wind energy. While supporting the need for engineering education in the community, this project also deepened learning for both education and engineering students at Roger Williams …

Teaching Approximations Of Mechanical Engineering Practice Through Designing And Building Robots: An Approach Inspired By Monozukuri, Kevin Delaney, Ger Nagle

Conference Papers

Engineering design is a complex subject and undergraduate students, having learnt to quantify the performance of specific elements of engineering objects, often find it difficult to integrate these elements into quite basic design concepts. Upon entering the workforce engineering graduates must be able to do a great deal more than solve the technical problems taught in engineering school. To help students develop real-world engineering skills as part of their engineering education, the Mechanical Engineering Discipline in Technological University Dublin (TU Dublin) introduced Problem Based Learning (PBL) for Third Year Mechanical Engineering students in 2005.

A recent review of this teaching …

Effect Of Project Lead The Way Participation On Retention In Engineering Degree Programs, Juliana Utley, Toni Ivey, John Weaver, Mary Jo Self

Journal of Pre-College Engineering Education Research (J-PEER)

A key goal of pre-college engineering programs is to increase the number and retention of students pursuing engineering degrees. The researchers conducted a transcript analysis in order to compare the retention of entering engineering majors at a university based on whether or not they participated in Project Lead the Way (PLTW) in high school. PLTW Engineering is a high school pre-engineering curriculum that offers a series of courses to increase student awareness and scaffold an understanding of engineering design. The findings from this study offer little support regarding the impact of students’ PLTW participation on engineering degree completion. However, findings …

Iron Range Engineering - An Overview Of Design And Open-Ended Problem Solving Activities In An Interdisciplinary, Project-Based Learning Program, Elizabeth Pluskwik

Integrated Engineering Department Publications

Project-based learning (PBL) in engineering education is growing at a rapid pace. The Iron Range Engineering (IRE) Program of Minnesota State University Mankato, is an upper division (3rd and 4th year) undergraduate engineering education program based on the Aalborg, Denmark PBL model. Students work in teams to solve industry-sourced projects each semester. The learning of engineering is accomplished in three domains - technical learning of engineering concepts, professionalism, and design, which we call the “three-legged stool” of engineering education. The program promotes entrepreneurial mindset and innovative open-ended problem-solving in context. Fifty students are enrolled in 3rd and 4th-year studies at …

Poster: Life After Sports: Black Males Pursuing Engineering And Related Stem Fields, Leroy L. Long Iii, Robert A. Bennett Iii, Morris R. Council Iii, Mckenna James

Publications

This poster summarizes findings and offers recommendations from a research study involving Black males who majored in engineering or a related STEM field and played a collegiate sport. Specifically, the poster highlights ways in which the research participants were able to transition from playing sports to pursuing an engineering or related STEM career. For this particular poster, the presenters focused on the experiences of four Black men. Two of the Black men played college football at historically Black colleges and universities (HBCUs) in the Southeast. Two other Black men ran track at Division 2 (D2) predominantly White institutions (PWIs) in …

Understanding Industry’S Expectations Of Engineering Communication Skills, Lilian Maria De Souza Almeida

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The importance of communication in the engineering profession is widely acknowledged by various stakeholders, including industry, academia, professional engineers, and engineering students. Even though alternative strategies to help students improve their ability to communicate professionally have been approached by many engineering programs across the country, research indicates a continued dissatisfaction of employers when it comes to the performance of engineers as communicators in the workplace. This perspective suggests efforts to improve students’ communication skills in universities may be inconsistent with workplace needs, revealing an apparent gap between what is taught and what is expected from engineering professionals. This gap provides …

Engineering Education Students Present Research At The Aera Annual Meeting | College Of Engineering, Utah State University

College of Engineering News

Theresa Green and Darcie Christensen, two doctoral students in the Department of Engineering Education, presented research at the 2019 Annual Meeting of the American Education Research Association (AERA) held on April 5-9 in Toronto, Ontario, Canada.

Preliminary Findings Of A Phenomenographic Research Study Into Academic Conceptions Of The Term Professional Skills, Una Beagon, Brian Bowe

Other resources

This presentation outlines preliminary findings of a phenomenographic study of academic conceptions of the term professional skills.

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Task Affect And Task Understanding In Engineering Problem Solving, Oenardi Lawanto, Angela L. Minichiello, Jacek Uziak, Andreas Febrian

Engineering Education Faculty Publications

Within the self-regulated learning literature, motivation is considered to be an essential feature of students’ self-regulatory processes. Additionally, task affect (i.e., personal objectives and task value) is thought to influence students’ self-regulatory processes; insufficient task affect may lead to failures to self-regulate effectively. In a school setting, task affect is a form of motivation for completing the course tasks in order to attain course-level goals that are inherently valued. In this study, motivation is operationalized as students’ personal objectives and task values, and self-regulation refers to students’ understanding of tasks (also called task interpretation skill) involved in a course. This …

Business In Engineering Education: Issues, Identities, Hybrids, And Limits, Mike Murphy, Pat O'Donnell, John Jameson

Books/Book chapters

This chapter explores how engineering students are broadened in their education through the teaching of non-engineering subjects, such as business subjects, in order to develop critical thinking skills and self-knowledge of what it means to be an engineer. The goal of the chapter is to provide a commentary on the level of interaction, from design of courses to design of curricula, between business faculty and engineering faculty, and the results of that interaction. This chapter sets out to (i) explore whether there appears to be a place in engineering education curricula for reflective critique of assumptions related to business thinking, …

Scaffolding Project-Based Learning In An Engineering And Education Partnership Using Open-Access Technology, Pilar Pazos, Stacie I. Ringleb, Jennifer Kidd, Rachel Jones

Engineering Management & Systems Engineering Faculty Publications

This paper describes the use of a freely-accessible open-source platform based on Google Apps for Education that combines Google Sites, Google Docs, Google Drive, Google Hangouts and script language in a custom-based interface that supports collaborative service-learning projects for teams of Engineering and Education students. The approach discussed in this paper was successful in promoting collaboration among students from two different disciplines working remotely. The analysis suggests that balanced participation in the team, presence of shared goals and clear roles that emphasized individual and collective responsibilities were key to a successful interdisciplinary project experience. While many students still reported struggling …

Guest Editorial Special Issue On Using Enquiry-And-Design-Based Learning To Spur Epistemological And Identity Development Of Engineering Students, Shannon Chance, Bill Williams, Tom Goldfinch, Robin S. Adams, Lorraine N. Fleming

Articles

This Special Issue of the IEEE Transactions on Education focuses on using enquiry-based design projects to spur engineering students’ development, so as to increase understanding and application of the relevant theories, foster higher rates of student development and achieve this in healthy and productive ways.

Doctoral Engineering Grant Writing Experience To Prepare Future Professionals And Faculty, Katherine Smith, Nathapon Siangchokyoo, Erika Gamarra, Ashish Tamhane, Anthony W. Dean

Engineering Technology Faculty Publications

While there have been many efforts to broaden opportunities for all STEM students by engaging in interdisciplinary endeavors and education focusing on professional development, there are particular problems facing students pursuing doctoral degrees in engineering disciplines. Doctoral programs of the future need to become better equipped to prepare students for future careers as engineering professionals or faculty. It has been noted recently that many doctoral degree recipients are turning to jobs outside of academia but increases in undergraduate enrollment and the average age of the professoriate indicate an increase in demand for new faculty. Both future faculty and professionals can …

Topic Development In The Freshman Engineering Paper: Finding A Focus, Edward J. Eckel

University Libraries Faculty & Staff Publications

Topic development and focus are relatively neglected areas of the student research process. This study examined how students in a freshman engineering writing class developed initial research paper topics into focused thesis statements. A mixed methods approach was used, incorporating online surveys, qualitative interviews, and a rubric to track topic development and assess thesis statement focus. The survey results and student comments indicated that participants were more competent at the mechanics of finding sources and writing than at developing appropriately scoped thesis statements. Closer collaboration between writing instructors and librarians is urged to more effectively support and scaffold topic development.

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Board 78: Establishing A Pathway To Completion For Pursuing Engineering And Engineering Technology Degrees Through A Scholarship Program At Old Dominion University, Vukica M. Jovanovic, Anthony W. Dean, Kim Bullington Sibson, Cynthia Tomovic, Rafael Landaeta

Engineering Technology Faculty Publications

There are various barriers facing adult students and veterans completing engineering degrees. Many of these student’s work part- or full-time while in college. In order to help these students, enable high retention rates, and decrease time to graduation require an in-depth understanding of specific student populations, especially ones classified as underrepresented. This paper provides an initial look into the first year of a scholarship program, funded by the National Science Foundation, and student success activities designed to support high-achieving, low-income students with demonstrated financial need pursuing bachelor's degrees in engineering and engineering technology. Support services and scholarships are for veterans …

Infographic: D1 Stem Student-Athletes, Mckenna James, Leroy Long Iii

Publications

In this infographic, Division I student-athletes studying degrees in science, technology, engineering, and math (STEM) are displayed. The infographic focuses on women and racial/ethnic minoritized students who pursue STEM degrees and play a National Collegiate Athletic Association (NCAA) Division I sport. For a variety of sports, the achievements, awards, and degrees of collegiate athletes are displayed. Whether they studied mathematics, psychology, or aerospace engineering, these diverse individuals from different gender/racial backgrounds rose to the challenge of being a STEM student-athlete and achieved greatness.

The Creation, Validation, And Implementation Of The Engineering Process Safety Research Instrument, Brittany Lynn Butler

Theses and Dissertations

The purpose of this study was to develop and validate an instrument that can measure how senior chemical engineering students make process safety decisions. The Engineering Process Safety Research Instrument (EPSRI) contains dilemmas that represent process safety scenarios, followed by three decision options, and 12-15 considerations that fall into pre-conventional, conventional, or post-conventional forms of reasoning. Three studies were completed as a part of this research. The content validation study ensured the dilemmas represented process safety scenarios, the considerations matched their perceived theoretical definitions, and that no content areas were omitted. This study resulted in validation of the content, following …

Spatial Ability Degradation In Undergraduate Mechanical Engineering Students During The Winter Semester Break, Benjamin J. Call

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spatial ability represents our ability to mentally arrange, rotate, and explore objects in multiple dimensions. This ability has been found to be important for engineers and engineering students. Past research has shown that many interventions can be created to boost an individual’s spatial ability. In fact, past research has indicated that engineering students significantly increase in spatial ability without an intervention while they are enrolled in certain engineering courses. Some researchers have claimed that the spatial ability boosts are permanent after an intervention. However, most researchers do not check the validity of that claim with continued assessment after more than …

An Investigation Of Engineering Design Cognition And Achievement In Primary School, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim, Liwei Zhang

Faculty Publications

This study examined the design cognition and achievement results of both kindergarten and fourth grade students engaged in engineering design-based instructional activities. Relationships between design cognition and student grade level, as well as quality of student work, were investigated. 30 concurrent think-aloud protocols were collected from individual primary students as they worked in groups to design and make a solution to a design task. The concurrent think-aloud protocols were examined and coded to determine the duration of time the participants devoted to a pre-established set of mental processes for technological problem solving. Significant differences between kindergarten and fourth grade participants …

What Does Hidden Curriculum In Engineering Look Like And How Can It Be Explored?, Idalis Villanueva, Laura Gelles, Marialuisa Di Stefano, Buffy Smith, Renetta G. Tull, Susan M. Lord, Lisa Benson, Anne Therese Hunt, Donna M. Riley, Gery W. Ryan

Engineering Education Faculty Publications

This work in progress paper describes the initial stages of a project which aims to characterize the mechanisms of hidden curriculum (HC) in engineering and identify methods for exploring this phenomenon. To effectively study the complex nature of HC, this work brings together researchers with a range of expertise (sociology, engineering education, engineering, statistics, policy analysis, curriculum and instruction) to develop a holistic approach to explore HC in engineering. This work describes the process of gathering input from this multidisciplinary team as well as the literature to develop a mixed-method instrument and model to explore the mechanisms behind HC in …

Investigating The Entrepreneurial Mindset Of Engineering And Computer Science Students, Cheryl Q. Li, Ronald S. Harichandran, Nadiye O. Erdil, Jean Nocito-Gobel, Maria-Isabel Carnasciali

Engineering and Applied Science Education Faculty Publications

In recent years, numerous engineering programs around the country have introduced curricular revisions and co-curricular activities to develop entrepreneurial skills in students. The primary motivation of these efforts is to graduate engineering students who can rapidly contribute to the economic growth of the nation through entrepreneurship and innovation. A precursor to launching startups or creating new products or services is the development of an entrepreneurial mindset. Efforts focused on developing an entrepreneurial mindset in engineering students through curricular and co-curricular activities are emerging from the many partner institutions of the Kern Entrepreneurial Engineering Network (KEEN). As these efforts strengthen, approaches …

Real-Time Feedback For In-Class Introductory Computer Programming Exercises, Ariana Dawn Sellers

Theses and Dissertations

Computer programming is a difficult subject to master. Introductory programming courses often have low retention and high failure rates. Part of the problem is identifying if students understand the lecture material. In a traditional classroom, a professor can gauge a class's understanding on questions asked during lecture. However, many struggling students are unlikely to speak up in class. To address this problem, recent research has focused on gathering compiler data from programming exercises to identify at-risk students in these courses. These data allow professors to intervene with individual students who are at risk and, after analyzing the data for a …

Ascertaining The Impact Of P–12 Engineering Education Initiatives: Student Impact Through Teacher Impact, Marissa H. Forbes, Jacquelyn F. Sullivan, Denise W. Carlson

Journal of Pre-College Engineering Education Research (J-PEER)

The widespread need to address both science, technology, engineering, and math (STEM) education and STEM workforce development is persistent. Underscored by the Next Generation Science Standards, demand is high for P–12 engineering-centered curricula. TeachEngineering is a free, standards-aligned NSF-funded digital library of more than 1,500 hands-on, design-rich K–12 engineering lessons and activities. Beyond anonymous site-user counts, the impact of the TeachEngineering collection and outreach initiatives on the education of children and their teachers was previously unknown. Thus, the project team wrestled with the question of how to meaningfully ascertain classroom impacts of the digital engineering education library and—more broadly—how to …