Engineering Commons^™

Kihefo Vocational Center: Kabale, Uganda, Jason Matthew Angerer

Construction Management

Journeyman International (JI) is a non-profit organization which acts as a platform for bringing together volunteer Architects, Designers, Engineers, and Construction Managers with humanitarian projects around the world. Kigezi Healthcare Foundation (KIHEFO) a non-profit NGO located in Kabale, Uganda is a client seeking to build a vocational center to educate the workforce of Uganda. The center will include multi-purpose class rooms, a dining hall, rabbit farm, carpentry shop, and living complex. The Architect on the project was Courtney Wedel from Cal Poly. As the Construction Manager on the project my responsibilities include; Design Assist, Feasibility Analysis, Scheduling, Estimating, and Managing …

Process Development For The Fabrication Of Semiconductor Devices And Circuits Using Spin-On Dopant, Richard R. Ryan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Traditional approaches to semiconductor device fabrication are expensive and time consuming, making them out of reach for most universities and colleges. The objective of this thesis is to develop a process by which semiconductor devices and circuits can be implemented completely in-house using spin-on dopants (SODs), and low-cost transparency masks, to significantly reduce the lead time, complexity, and cost associated with device fabrication. This will allow hands on fabrication experience for students at universities and colleges without the traditional expensive device fabrication facilities. In addition, it will also allow students and professors to design, fabricate and test semiconductor devices and …

Multimedia Techniques For Construction Education And Training, Wayne A. Bunnell

Open Access Theses

The current profession of civil engineering often focuses education and training on code compliance rather than constructability and construction techniques. Also, it is well accepted that it takes a decade or more for engineers to develop a high-level project construction understanding and many state departments of transportation rely on in-field training for entry-level inspectors, with little or no education provisions for contractors. This research investigated the use of time-lapse photography to develop training and education material that will improve the understanding of project construction and crucial quality control specifications of an entry-level engineer, contractor, or inspector. Overall, the project team …

Conceptual Understanding Of Threshold Concepts Of Electrical Phenomena: Mental Models Of Senior Undergraduates In Electrical Engineering, Mark T. Carnes

Open Access Dissertations

Every field of study has a set of domain-specific concepts that anyone who desires to work in that field must know and understand. Most students who pursue university degrees in engineering trust that their education is designed to provide them with this knowledge. But does it? In electrical engineering (EE), conceptual understanding of electrical phenomena has rarely been addressed. Even though the presumed goal of instructors and students alike is to learn the concepts of electrical phenomena well enough to be able to use the concepts to design useful things, it is difficult to determine whether this goal is being …

The Association Between Tolerance For Ambiguity And Fear Of Negative Evaluation: A Study Of Engineering Technology Capstone Courses, Sergey I. Dubikovsky

Open Access Dissertations

For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These truly integrative design activities do not have a single “correct” solution. Instead, there is an array of solutions, many of which could be used to achieve the final result. This ambiguity can cause students to experience anxiety during the projects.

This study examined the main topics: • …

Carbon Nanotube Thermal Interfaces And Related Applications, Stephen L. Hodson

Open Access Dissertations

The development of thermal interface materials (TIMs) is necessitated by the temperature drop across interfacing materials arising from macro and microscopic irregularities of their surfaces that constricts heat through small contact regions as well as mismatches in their thermal properties. Similar to other types of TIMs, CNT TIMs alleviate the thermal resistance across the interface by thermally bridging two materials together with cylindrical, high-aspect ratio, and nominally vertical conducting elements. Within the community of TIM engineers, the vision driving the development of CNT TIMs was born from measurements that revealed impressively high thermal conductivities of individual CNTs. This vision was …

Race, Class And Gender In Engineering Education: A Quantitative Investigation Of First Year Enrollment, Canek Moises Luna Phillips

Open Access Dissertations

Research explanations for the disparity across both race and gender in engineering education has typically relied on a deficit model, whereby women and people of color lack the requisite knowledge or psychological characteristics that Whites and men have to become engineers in sufficient numbers. Instead of using a deficit model approach to explain gender and race disparity, in the three studies conducted for this dissertation, I approach gender and race disparity as the result of processes of segregation linked to the historic and on-going perpetuation of systemic sources of oppression in the United States. In the first study, I investigate …

Leveling The Playing Field: Teacher Perception Of Integrated Stem, Engineering, And Engineering Practices, Bridgette Fincher

Graduate Theses and Dissertations

The purpose of this study was to describe the perceptions and approaches of 14 third-through-fifth grade Arkansan elementary teachers towards integrative engineering and engineering practices during 80 hours of integrated STEM professional development training in the summer and fall of 2014. This training was known as Project Flight. The purpose of the professional development was to learn integrated STEM content related to aviation and to write grade level curriculum units using Wiggins and McTighe’s Understanding by Design curriculum framework. The current study builds upon on the original research.

Using a mixed method exploratory, embedded QUAL[quan] case study design and a …

Status Of Nuclear Security Education And Research In Bangladesh And Looking Forward, Md. Shafiqul Islam, Md. Mobasher Ahmed

International Journal of Nuclear Security

Bangladesh uses category I of nuclear materials and category 1-5 of radioactive materials in the field of research, medical and industries. The Government is going to implement its first nuclear power plant under an IGA between the Bangladesh and Russian Governments. With the emerging global nuclear and radiological terrorism by potential adversaries, enhancing nuclear security is the paramount importance for the country. The paper has found no established communication channels among stakeholders in order to work in a coordinated and collaborative manner for strengthening the nuclear security. This has resulted lacking importance of education, research, training and knowledge management initiatives …

Building The Education And Training Pillar Of The University Of Tennessee’S Institute For Nuclear Security, Howard Lewis Hall

International Journal of Nuclear Security

The University of Tennessee (UT) developed its first formal and coordinated efforts in nuclear security education in 2008-2009 with its graduate certificate program in nuclear security in the Department of Nuclear Engineering. Building on this work, in 2011 UT established the UT Institute for Nuclear Security (INS) as a collaborative center at the university to expand its curricular impact as well as foster research and partnerships with nearby major governmental facilities engaged in nuclear security work. Oak Ridge National Laboratory (ORNL), the Y-12 National Security Complex (Y-12), and Oak Ridge Associated Universities (ORAU) have joined with UT as charter members …

Nuclear Security Education At Pakistan Institute Of Engineering And Applied Sciences (Pieas): Current Status, Future Prospects And The Lessons Learnt, Tariq Majeed Dr.

International Journal of Nuclear Security

In this paper, the details of nuclear security education at Pakistan Institute of Engineering and Applied Sciences (PIEAS) have been discussed. Nuclear Security education was initiated at PIEAS as a sub-specialty of its MS Nuclear Engineering Program in October 2009. Two courses, Nuclear Security (NE-581) and Physical Protection Systems (NE-582) have been offered on regular basis in the 3^rd and 4^th semesters. To date, 72 students have been graduated with this sub-specialty. The most important lesson learnt is that introduction of nuclear security related courses in nuclear engineering program has opened up new venues of applications of nuclear …

A Study Of Applications Of 3d Animation For Emergency Medicine Pedagogy, Huilong Zheng

Open Access Theses

There is ample precedent for the use of 3D animation in education, though little research on specific applications in the field of medicine. An experiment was carried out to assess the suitability of 3D animation for educational purposes in emergency medicine courses. Two groups of experimental participants were assessed on their ability to respond to three emergency medical situations in simulated test scenarios. Both groups received equivalent information on how to treat the three different medical emergencies. The control group received the information in traditional lecture format. The experimental group instead received the information from a set of 3D animations. …

Exploratory Study Of Students' Representational Fluency And Competence Of Electric Circuits, William Fernando Sandchez Cossio

Open Access Theses

Electric circuits are extensively used in today’s devices as computers, phones, cameras and others. This makes them a crucial topic in engineering because almost every engineering branch could be related of used them at different levels. Even though their importance, students often struggle during the learning process of circuit analysis topics. Additionally, other very important abilities for engineering students are the capacities to create, use, express and think about models and representations of technical concepts; and the capacities to translate and map from one representation to another. These abilities are known as representational competence and representational fluency respectively.

The purpose …

Methods To Facilitate Community Participation In Humanitarian Engineering Projects: Laying The Foundation For A Learning Platform, Andrea Mazzurco

Open Access Dissertations

Humanitarian engineering (HE) is a new interdisciplinary field that is rapidly emerging worldwide. Many not-for-profit organizations such as Engineers Without Borders, Practical Action, and International Development Enterprise have been flourishing with the goal of providing technological solutions to those who need them the most. In engineering programs across the U.S., HE, service-learning, community engagement, and similar programs are gaining popularity because they offer an efficient way to meet ABET accreditation criteria, while also teaching valuable technical and professional skills to engineering students. However, the cultural, social, and political differences among communities and engineers often add degrees of difficulty that cannot …

Development Of First-Year Engineering Teams' Mathematical Models Through Linked Modeling And Simulation Projects, Kelsey Joy Rodgers

Open Access Dissertations

The development and use of mathematical models and simulations underlies much of the work of engineers. Mathematical models describe a situation or system through mathematics, quantification, and pattern identification. Simulations enable users to interact with models through manipulation of input variables and visualization of model outputs. Although modeling skills are fundamental, they are rarely explicitly taught in engineering. Model-eliciting activities (MEAs) represent a pedagogical approach used in engineering to teach students mathematical modeling skills through the development of a model to solve an authentic problem.

This study is an investigation into the impact of linking a MEA and a simulation-building …

From Mechanic To Designer: Evolving Perceptions Of Elementary Students Over Three Years Of Engineering Instruction, Anastasia M. Rynearson

Open Access Dissertations

Due in part to increasing state standards that require engineering in K-12 curricula and the Next Generation Science Standards’ incorporation of engineering outcomes, inclusion of engineering into elementary classrooms is on the rise. Teacher development and experiences in learning about and implementing engineering have been studied, but elementary students’ experiences when learning about engineering have not been explored.

The purpose of this study is to address the question: How do elementary students’ knowledge of, attitudes toward, and overall conceptions of engineering evolve over three years of engineering instruction?

This study follows seven elementary school students through three years of engineering …

Using An Object And Pattern Oriented Approach To Hydrological Modelling Teaching And Research, R.W. Vervoort, J.H.A. Guillaume, T.F.A Bishop, D. Kundu, F.F. Van Ogtrop

International Congress on Environmental Modelling and Software

Introducing hydrological modelling in undergraduate teaching is challenging, and some of this is related to the decline in STEM knowledge in students. Enabling students to confidently work with a range of hydrological models remains difficult, particularly if the goal is to make students understand the modelling process and model structures. The limited literature points to a number of educational tools that have been developed, falling into three classes: magical box fully developed GUIs with little insight into model operation; highly theoretical command line linear reservoir and unit hydrograph tools; and model tools focusing on one single model structure. Given the …

Facebook Use Among African American And Hispanic Students: An Exploratory Investigation Of Perceived Academic Impact, Sathasivam Mathiyalakan, Sharon D. White, Jorge O. Brusa

Journal of International Technology and Information Management

Facebook is one of the world’s leading social networking sites. It is pervasive in students’ lives and can impact their academic careers in a variety of ways. However, little research exists evaluating the use of Facebook in minority academic settings. An early step in this direction is to gain an understanding of how different student demographic groups use Facebook. An interest in further assessment of Facebook’s role in diverse segments of academia motivates the collection and analysis of Facebook-related data from minority serving institutions such as Historically Black Colleges or Universities (HBCUs) and Hispanic Serving Institutions (HSIs). This study presents …

Examining Bridges Between Informal And Formal Learning Environments: A Sequential Mixed Method Design, Dagen L. Valentine

Department of Agricultural Leadership, Education, and Communication: Dissertations, Theses, and Student Research

The purpose of this sequential mixed method study was to identify schools implementing a technology-based engineering design intervention in a way that connects or bridges formal learning environments of the school-day to informal learning environments such as afterschool programs. Further, this study investigated educators’ decisions that enabled or facilitated bridging between formal and informal learning environments. This cooperation and/or linking between informal and formal learning time is bridging. Participants included public schools (n=16) in Eastern Nebraska that incorporated the Nebraska Wearables Technology (WearTec) program at their school, club or Out-of-School-Time program during the 2015-2016 school year. Three of the schools …

Automatic Generation And Grading Of Programming Exercises, Andrew Dufrene

Computer Science and Software Engineering

In our current age of technological advances, and rising education costs, it is becoming increasingly beneficial to use technology to aid in education, usually through automated lectures or grading. One missing feature from this automated education is complex grading and problem generation. The main objective of this project is to create a program that can automatically generate and grade problems of varying difficulties based on the topic of programming for loops. The project solution was created as a program designed for use in Dr. Clinton Staley’s Intelligent Homework System, which is used precisely for automated exercise grading and generation. Ultimately, …

Can We Teach A Programming Language As A Second Language?, Lulu Sun, Christina Frederick, Paula Sanjuan Espejo, Rachel Cunningham

Publications

This paper describes a design and implementation of a NSF sponsored project in 2015. This study will test the hypothesis that the use of cognitive frameworks in second language acquisition for the development of a blended learning of programming languages can improve engagement and the learning experience of engineering students. Using this approach will place greater emphasis on problem solving techniques that can be utilized in all courses. The online module consists of a series of short videos (10-20 minutes), online quizzes with tiered questions, and topic specified discussion board led by student researchers. Students’ demographic data, course-related behaviors such …

Polyfs Visualizer, Paul Martin Fallon

Master's Theses

One of the most important operating system topics, file systems, control how we store and access data and form a key point in a computer scientists understanding of the underlying mechanisms of a computer. However, file systems, with their abstract concepts and lack of concrete learning aids, is a confusing subjects for students. Historically at Cal Poly, the CPE 453 Introduction to Operating Systems has been on of the most failed classes in the computing majors, leading to the need for better teaching and learning tools. Tools allowing students to gain concrete examples of abstract concepts could be used to …

Computing Research In Academia: Classifications, Keywords, Perceptions, And Connections, Sung Han Kim

Theses and Dissertations

The Association for Computing Machinery (ACM) recognizes five computing disciplines: Computer Science (CS), Computer Engineering (CE), Information Technology (IT), Information Systems (IS), and Software Engineering (SE). Founded in 1947 the ACM is the world's largest society for computing educators, researchers, and professionals. While Computer Science has been a degree program since 1962, the other four are relatively new. This research focuses on understanding the graduate research in four of the five ACM disciplines (CS, CE, IT, and IS) using a large body of thesis and dissertation metadata. SE is not found in the metadata and graduate work in SE is …

Designing Sewn Circuits And Stem Self-Efficacy In Middle School Girls, Kara Kaiser

Graduate Theses and Dissertations

The purpose of this study is to determine if the experience of designing and sewing LilyPad Arduino circuits in crafts projects can increase middle school girls’ STEM self-efficacy. Boys STEM self-efficacy will also be assessed to determine if LilyPad Arduino circuits can also increase boys’ STEM self-efficacy. Researchers have been wondering why there is a male dominance in STEM (science, technology, engineering and mathematics) fields and why some women do not have a particular interest in these subjects. There are several reasons this could happen; stereotypes conveyed to them by parents and/or teachers, they genuinely are not interested in STEM …

Mining Big Data To Create A Tool For Empirical Observation Of Continuous Safety Improvement In A Construction Company - A Progressive Case Study In The Lean Environment, Nicolas J. Michuda

Open Access Theses

In any iterative process, without a system of measurement, controlled improvement cannot be recorded. This is especially true in the construction industry, where error occurs, often with fatal repercussions. As part of a process to facilitate the establishment of this metric, an entirely new application was created. The goal of this application is to measure the causal factors that lead to incidents, which will allow the user and administration to track the circumstances and types of incidents. This enables the company to focus on these problem areas and improve through training. By analyzing these incident trends over time, the company …

Conversations About Diversity: Institutional Barriers For Underrepresented Engineering Students, Leroy Long Iii, Joel Alejandro Mejia

Publications

The United States is becoming increasingly more diverse. Specifically, demographics are shifting because of growth among historically underrepresented racial and ethnic minorities, including African Americans, Latinos, and Native Americans. At the same time, a declining number of skilled workers in science, technology, engineering, and mathematics (STEM) fields threatens U.S. global competitiveness and national security. Low participation, representation, engagement, and inclusion continue to reduce the intellectual capacity of the U.S. STEM workforce. The aforementioned societal changes require diversity in STEM education and the nation at large. Past research offers additional support for the importance of diversity. For example, racial diversity can …

A Comparison Of Instructional Strategies For Teaching Entry-Level Welding At The High School Level, Jared Paul Massic

Theses and Dissertations

The traditional method of teaching welding has remained unchanged for decades. In this model, an instructor gives demonstrations to a class of students and then helps them individually as they practice the techniques of welding. This traditional instructional method has been effective but is time consuming. Due to a significant increase in the demand for skilled welders within the United States, efforts have been made to develop more efficient methods of providing welding instruction. Various electronic welding guidance systems and virtual welding systems have recently been developed. In this study, the researcher addressed two questions 1) Does the use of …

Modernizing The Current Afghan Engineering Education System: Challenges And Opportunities, Khalilullah Mayar

Open Access Theses

Having an effective engineering education system in place can play a crucial role in the development and reconstruction process of a war-ravaged country, such as Afghanistan, where tens of billions of dollars of international aid has been spent in the past 14 years for that process, including higher education. Unfortunately, at this point, the Afghan engineering education system is not yet financially self-sufficient nor can it address the education requirements of today’s job market. This thesis aimed to identify the major challenges still faced by Afghanistan and to provide a comprehensive list of recommendations and priorities that can make the …

Learning The Language Of Academic Engineering: Sociocognitive Writing In Graduate Students, Catherine G. P. Berdanier

Open Access Dissertations

Although engineering graduate programs rarely require academic writing courses, the indicators of merit in academic engineering, such as journal publications, successful grants, and doctoral milestones (e.g. theses, dissertations) are based in effective written argumentation and disciplinary discourse. Further, graduate student attrition averages 57% across all disciplines, with some studies classifying up to 50% of these students as “ABD” (All But Dissertation.) In engineering disciplines specifically, graduate attrition rates across the U.S. average 36% (both Master’s and PhD students), according to the Council of Graduate Schools. The lack of socialization is generally noted as a main reason for graduate attrition, one …

Use Of Galvanic Skin Responses, Salivary Biomarkers, And Self-Reports To Assess Undergraduate Student Performance During A Laboratory Exam Activity, Idalis Villanueva, Maria Valladares, Wade H. Goodridge

Engineering Education Faculty Publications

Typically, self-reports are used in educational research to assess student response and performance to a classroom activity. Yet, addition of biological and physiological measures such as salivary biomarkers and galvanic skin responses are rarely included, limiting the wealth of information that can be obtained to better understand student performance. A laboratory protocol to study undergraduate students' responses to classroom events (e.g., exams) is presented. Participants were asked to complete a representative exam for their degree. Before and after the laboratory exam session, students completed an academic achievement emotions self-report and an interview that paralleled these questions when participants wore a …