Engineering Commons^™

Use Of Galvanic Skin Responses, Salivary Biomarkers, And Self-Reports To Assess Undergraduate Student Performance During A Laboratory Exam Activity, Idalis Villanueva, Maria Valladares, Wade H. Goodridge

Engineering Education Faculty Publications

Typically, self-reports are used in educational research to assess student response and performance to a classroom activity. Yet, addition of biological and physiological measures such as salivary biomarkers and galvanic skin responses are rarely included, limiting the wealth of information that can be obtained to better understand student performance. A laboratory protocol to study undergraduate students' responses to classroom events (e.g., exams) is presented. Participants were asked to complete a representative exam for their degree. Before and after the laboratory exam session, students completed an academic achievement emotions self-report and an interview that paralleled these questions when participants wore a …

Measuring The Effectiveness Of Software-Based Training To Improve The Spatial Visualization Skills Of Students In Stem Disciplines In Higher Education Institutions, Peter Cole

Dissertations

This research investigates how software can be used to teach spatial skills leading to greater success in Science, Technology, Engineering, and Mathematical (STEM) fields. Existing research indicates that spatial skills can be taught and that good spatial skills are common to people who succeed in STEM fields. In this work, a software-only testing system with a direct targeted, training intervention module was implemented to measure and teach spatial skills using mental rotations, which are believed to be one of the most significant indicators of success in STEM fields. Spatial skills were tested using a standardized and validated test that measures …

Educational Methods For Inverted-Lecture Computer Science And Engineering Classrooms To Overcome Common Barriers To Stem Student Success, Kathleen Timmerman

Browse all Theses and Dissertations

New educational pedagogies are emerging in an effort to increase the number of new engineers available to enter the workforce in the coming years. One of the re-occurring themes in these pedagogies is variations of the flipped classroom. Often the additional classroom time gained from flipping is used to reinforce learning objectives. It is hypothesized that it might be more beneficial to students if a portion of that time is used to address common non-cognitive barriers that prevent students from succeeding in the major. In a freshman Introductory Computer Science course, three different pedagogies are compared: a hybrid lecture-active learning …

Can A Five Minute, Three Question Survey Foretell First-Year Engineering Student Performance And Retention?, Stephanie M. Gratiano, William J. Palm

Engineering, Computing & Construction Management Faculty Publications

This research paper examines first-year student performance and retention within engineering. A considerable body of literature has reported factors influencing performance and retention, including high school GPA and SAT scores,1,2,3 gender,4 self-efficacy,1,5 social status,2,6,7 hobbies,4 and social integration.6,7 Although these factors can help explain and even partially predict student outcomes, they can be difficult to measure; typical survey instruments are lengthy and can be invasive of student privacy. To address this limitation, the present paper examines whether a much simpler survey can be used to understand student motivations and anticipate student outcomes.

The survey was administered to 347 students in …

Design And Production Of A Hydrogel Forming Polypeptide: Engaging High School Students In Protein Design, James K. Deyling

ETD Archive

Bioinks are a class of hydrogel that have the potential to be the ink used in the creation of printed organs, connective tissue, and other important structures within the body. One class of material that may be a suitable bioink hydrogel is elastin-like polypeptides (ELPs), which are synthetic biopolymers inspired by the naturally existing connective tissue elastin. ELPs consist of a repeat pentapeptide sequence (GXGVP)n, where X is any of the 20 naturally existing amino acids other than proline. These biomolecules are capable of exhibiting environmental responsiveness when exposed to certain stimulus such as salt concentration, temperature, and pH, depending …

What Do We Know About Eesd And How Do We Know It?, Eddie Conlon, Iacovos Nicolaou, Brian Bowe

Conference papers

Huckle (2004) has argued that critical realism (CR) can provide a philosophical framework for higher education for sustainability. This paper reflects on the process of researching EESD in the Irish context and the usefulness of our approach which used mixed methods and drew on CR as its guiding philosophy. We will argue that aspects of the CR approach: its emphasis on a depth ontology, the search for causal mechanisms, its model of agency/structure relations and its emphasis on the combination of extensive and intensive methods provide tools for exploring EESD as a system. CR requires us to focus on “deeper …

Design And Evaluation Of The Impact Of A Multi-Agent Control System (Framework) Applied To A Social Setting, Perez Antonio Perez

Open Access Theses & Dissertations

The objective of this research is to design and analyze the performance of a new mechanism to improve the advising of students in a nontraditional environment. This nontraditional environment includes: a minority serving, commuter campus with a high percentage of transfer students. Specifically, these demographics are unable to keep a tightly controlled cohort of students flowing through to the completion of the curriculum. Students in these circumstances usually have varied course loads and competing priorities due to family and financial needs or other societal responsibilities. Therefore, there is a need for an individualized approach to advising.

University administrations face challenges …

A Standards-Based Grading Model To Predict Students' Success In A First-Year Engineering Course, Farshid Marbouti

Open Access Dissertations

Using predictive modeling methods, it is possible to identify at-risk students early in the semester and inform both the instructors and the students. While some universities have started to use standards-based grading, which has educational advantages over common score-based grading, at–risk prediction models have not been adapted to reap the benefits of standards-based grading. In this study, seven prediction models were compared to identify at-risk students in a course that used standards-based grading. When identifying at-risk students, it is important to minimize false negative (i.e., type II) errors while not increasing false positive (i.e., type I) errors significantly. To increase …

A Cross-Sectional Investigation Of The Relationships Education, Certification, And Experience Have With Knowledge, Skills, And Abilities Among Aviation Professionals, Daryl Watkins, Jason M. Newcomer, Matthew P. Earnhardt, James W. Marion, Rose A. Opengart, Aaron M. Glassman

International Journal of Aviation, Aeronautics, and Aerospace

The aviation industry is a complex system with many different segments and as such, makes hiring the right person a complicated endeavor. Previous research suggested that knowledge, skills, and abilities (KSAs) are composed of elements that include education, certification, and experience (ECE). The relative importance of ECE is dependent on the type of job within the aviation sector. The objective of this mixed-methods concurrent triangulation study was to examine aviation industry professionals’ perceived relationship between their ECE and the development of their KSAs. The convenience sample consisted of 404 professionals in the aviation industry who completed the KSA Composite Measure …

Students' Perception Of The Flipped Classroom In Graphical Communications, Lulu Sun

Publications

The flipped classroom requires students to study concepts before the class, apply what they learn in the classroom, and work with other students, which then makes it possible to get immediate feedback from the instructor. However, the student’s perception of the flipped classroom is not widely investigated in the area of engineering graphics. This paper presents a study of the flipped classroom in a Graphical Communications course. Students are required to study course material online before the face-to-face classroom experience. The online course study includes multimedia materials and an online quiz that they are required to take. The results of …

Implementation And Evaluation Of A Second Language Acquisition-Based Programming Course, Christina Frederick, Lulu Sun, Caroline Liron, Matthew A. Verleger, Rachel Cunningham, Paula S. Espejo

Publications

This paper describes initial findings of an NSF funded project under the Research Initiation Grant in Engineering Education (RIGEE) program. The RIGEE program is a multidisciplinary program focused on developing innovative, implementing and assessing innovative programs that enhance engineering education. The project applied theory and methods of second language acquisition (SLA) to teach an introductory programming course in engineering. The project is a two year long project implemented in multiple sections of an introductory programming class at a technological university, and assessed throughout implementation. It included a component whereby student assistants participated in project development and implementation, and were mentored …

Undergraduate Research Assistant Receives Eurp | Engineering Education, Usu College Of Engineering

College of Engineering News

Steven Wood, an undergraduate research assistant working with Dr. Wade Goodridge in Engineering Education has been awarded an EURP for this coming year to engage in research in spatial thinking. Steven will work with over a year of collected spatial ability data to discover the significant gains student achieve in it after completing a Statics course. Spatial ability includes the ability to mentally comprehend an object, diagram, model, etc. and be able to manipulate and visualize it in the mind. Numerous studies have found strong evidence that supports the correlation of high spatial ability to success in STEM coursework and …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Technological University Dublin since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" and …

Practitioner Interview, Eric Loucks

All ECSTATIC Materials

Phone interview with Eric Loucks from CDM Smith by Marcio Giacomoni and Meghna Babbar-Sebens. Interview questions asked inquired about (i) practitioner’s professional background, (ii) practitioner’s personal experience with systems analysis techniques and software in their job, (iii) role, benefits, and challenges in using systems analysis concepts in the water resources engineering profession, and (iv) recommendations for improving education of environmental and water resources systems analysis in universities.

An Understanding Of Student Satisfaction, Lorraine Sweeney

Dissertations

Retention is a challenge for all third level institutions and retention rates remain higher than colleges would like them to be, this has intensified in recent years as participants in higher education has increased and diversified. Third level institutions which would not only benefit from increased fees but also through low cost word of mouth promotion and an enhanced reputation. As such, an important concern for colleges is retaining students and understanding the reasons why students may choose to leave a program. While student satisfaction and retention is a well researched topic there remains questions to be answered in terms …

Lessons For Life, Story Musgrave

The Transdisciplinary STEAM+ Journal

This piece explores the creation of character and talent through a wide diversity of education and experience.

Opportunities To Identify Unmet Needs Outside Of The Operating Room, Jay R. Goldberg

Biomedical Engineering Faculty Research and Publications

The ability to identify unmet needs and new product opportunities is an important skill for biomedical engineering students planning a career in the medical device industry. Most biomedical engineering graduates will work in industry where many projects will not be defined for them. They will need to work with physicians, surgeons, nurses, clinical engineers, and other users of medical technology to identify problems and unmet needs and will work closely with marketing, sales, and other personnel to identify new product development opportunities. Students will be better prepared for careers involving the development of new medical devices if they are able …

The Nuclear Security Science And Policy Institute At Texas A&M University, Claudio A. Gariazzo, Kelley H. Ragusa, David R. Boyle, William S. Charlton, Sunil S. Chirayath, Craig M. Marianno, Paul Nelson Jr.

International Journal of Nuclear Security

The Nuclear Security Science and Policy Institute (NSSPI) is a multidisciplinary organization at Texas A&M University and was the first U.S. academic institution focused on technical graduate education, research, and service related to the safeguarding of nuclear materials and the reduction of nuclear threats. NSSPI employs science, engineering, and policy expertise to: (1) conduct research and development to help detect, prevent, and reverse nuclear and radiological proliferation and guard against nuclear terrorism; (2) educate the next generation of nuclear security and nuclear nonproliferation leaders; (3) analyze the interrelationships between policy and technology in the field of nuclear security; and (4) …

Intrusion Detection System Of Industrial Control Networks Using Network Telemetry, Stanislav Ponomarev

Doctoral Dissertations

Industrial Control Systems (ICSs) are designed, implemented, and deployed in most major spheres of production, business, and entertainment. ICSs are commonly split into two subsystems - Programmable Logic Controllers (PLCs) and Supervisory Control And Data Acquisition (SCADA) systems - to achieve high safety, allow engineers to observe states of an ICS, and perform various configuration updates. Before wide adoption of the Internet, ICSs used "air-gap" security measures, where the ICS network was isolated from other networks, including the Internet, by a physical disconnect [1]. This level of security allowed ICS protocol designers to concentrate on the availability and safety of …

Implementation Of Sustainability Improvements At The Facility Level: Business Motivations And Impact Of P2 Intern Recommendations, Vincent D. Kuppig

Department of Environmental Engineering: Theses and Other Student Research

Many sustainability and pollution prevention (P2) technical assistance programs exist across the Unities States. There is a need to quantify the actual impact using various metrics and, in addition, to identify the driving forces behind a company’s decision-making process. The University of Nebraska-Lincoln Partners in Pollution Prevention and the Kansas State University Pollution Prevention Institute intern programs partnered to complete 30 reassessments in 2014 to obtain specific information related to each P2 recommendation. After being reassessed, the clients were surveyed concerning their motivations for implementing and not implementing each recommendation; 23 clients responded to the survey.

The clients surveyed were …

Best Practices For Designing An Undergraduate Engineering Curriculum, Subrata Das, Komal K. Das, Krishna Singh

Journal of Research Initiatives

This article offer examples of best practices for planning instructional learning within the naturalistic setting and based on real learning experiences. The inquiry, based on practices and strategies proven successful in an undergraduate engineering class is the focus of this best practices article. This article is also a useful guide for administrators, practitioners, and undergraduate educators who make decisions on instructional delivery and scholarship. The instructional activities offer core instruction and curriculum modules on best practices for effective college instruction.

Cindy Hanson, Phd Student Received An Education Scholarship From Spie | Biological Engineering | Biological Engineering, Usu College Of Engineering

College of Engineering News

Cindy Hanson PhD Student has been awarded an SPIE Optics and Photonics Education Scholarship

BELLINGHAM, Washington, USA – 15 May 2015 – Cindy Hanson has been awarded a 2015 Optics and Photonics Education Scholarship by SPIE, the international society for optics and photonics for her potential contributions to the field of optics, photonics or related field.

Teaching Cybersecurity Using The Cloud, Khaled Salah, Mohammad Hammoud, Sherali Zeadally

Information Science Faculty Publications

Cloud computing platforms can be highly attractive to conduct course assignments and empower students with valuable and indispensable hands-on experience. In particular, the cloud can offer teaching staff and students (whether local or remote) on-demand, elastic, dedicated, isolated, (virtually) unlimited, and easily configurable virtual machines. As such, employing cloud-based laboratories can have clear advantages over using classical ones, which impose major hindrances against fulfilling pedagogical objectives and do not scale well when the number of students and distant university campuses grows up. We show how the cloud paradigm can be leveraged to teach a cybersecurity course. Specifically, we share our …

An Extensible Technology Framework For Cyber Security Education, Frank Jordan Sheen

Theses and Dissertations

Cyber security education has evolved over the last decade to include new methods of teaching and technology to prepare students. Instructors in this field of study often deal with a subject matter that has rigid principles, but changing ways of applying those principles. This makes maintaining courses difficult. This case study explored the kind of teaching methods, technology, and means used to explain these concepts. This study shows that generally, cyber security courses require more time to keep up to date. It also evaluates one effort, the NxSecLab, on how it attempted to relieve the administrative issues in teaching these …

An Investigation Of The Impact Of A Flipped Classroom Instructional Approach On High School Students' Content Knowledge And Attitudes Toward The Learning Environment, Matthew R. Bell

Theses and Dissertations

The idea of the “flipped classroom” is a relatively new concept in education that has become increasingly popular. Instructors who flip their classrooms reverse the roles of school work and homework by recording video lectures for students to watch before coming to class. Students then work on their homework in the classroom while the instructor is present to help them. Very little research has been done on the effectiveness of the flipped classroom to determine if students can perform better on exams by learning in a flipped classroom environment, especially for high school demographics. The purpose of this research is …

Online Resource Platform For Mathematics Education, Marisa Llorens, Edmund Nevin, Eileen Mageean

Other resources

No abstract provided.

Living-Learning Communities Improve First-Year Engineering Student Academic Performance And Retention At A Small Private University, William J. Palm, Charles R. Thomas

Engineering, Computing & Construction Management Faculty Publications

Living-Learning Communities (LLCs), in which students share a residence, one or more classes, and extracurricular activities, have been shown to improve first-year student engagement, academic performance, and retention in non-engineering fields. Research on Engineering LLCs has focused primarily on student engagement. Two studies to examine performance and retention found that LLCs had little effect on first-semester grades but increased first-year retention in engineering by 2 to 12%. Unfortunately, one of these studies did not control for differences in incoming student characteristics, and another used a comparison group that differed little from the LLC group, possibly causing them to understate the …

Nanohub.Org: A Gateway To Undergraduate Simulation-Based Research In Materials Science And Related Fields, Tanya A. Faltens, Peter A. Bermel, Amanda Buckles, K Anna Douglas, Alejandro H. Strachan, Lynn K. Zentner, Gerhard Klimeck

Birck and NCN Publications

Our future engineers and scientists will likely be required to use advanced simulations to solve many of tomorrow's challenges in nanotechnology. To prepare students to meet this need, the Network for Computational Nanotechnology (NCN) provides simulation-focused research experiences for undergraduates at an early point in their educational path, to increase the likelihood that they will ultimately complete a doctoral program. The NCN summer research program currently serves over 20 undergraduate students per year who are recruited nationwide, and selected by NCN and the faculty for aptitude in their chosen field within STEM, as well as complementary skills such as coding …

Engineering Students’ Perceptions Of Their Preparation For Engineering Practice, Eileen Goold Dr

Conference Papers

A common theme in the scholarly literature describing engineering is associated with the conception of the term global engineer where the role of the engineer has become quite broad. This study investigates engineering students’ perceptions of their future careers and their preparation for professional practice. This is important information for engineering educators as students with heightened interest in professional practice demonstrate more cognitive engagement. Additionally many graduate engineers are challenged by the transition into engineering practice. A mixed methods approach is employed. The degree competencies are required and learned by electronic engineering students, at the Institute of Technology Tallaght Dublin, …