Engineering Commons^™

Reducing Costs While Maintaining Learning Outcomes Using Blended, Flipped, And Mastery Pedagogy To Teach Introduction To Environmental Engineering, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As part of a cost-savings initiative, an existing course of 'introduction to environmental engineering' offered using a 'traditional' format of didactic class meetings supplemented with hands-on laboratory sessions, was changed significantly. The 'modified' format uses 'blended', 'flipped', and 'mastery' approaches to teach "2601: Fundamentals of Environmental Engineering" to approximately 60 sophomores pursuing baccalaureate degrees in environmental, civil, or architectural engineering, each semester. This paper presents a summary of the results from eight course offerings over a period of four years to more than 450 total students. Assessments included student grades; open-ended invitations for anonymous feedback at the end of each …

Logic Tiles, Andrew Wheeler, Tristan Lennertz

Computer Engineering

This project was originally conceived by Professor Andrew Danowitz as he considered the restructuring of the introductory digital design course at Cal Poly. As it stands now, students apply their knowledge of boolean algebra and combinatorial logic through the programming of a Field Programmable Gate Array (FPGA) using a Hardware Descriptive Language (HDL). While this is the industry standard for designing large, complex digital circuits, and is an fundamental skill to learn, there is a lack of actual circuit building in the process that can cause a disconnect from theory to application for students who have little-to-no experience with digital …

Diplomacy Lab Provides Term-Length Group Projects Integrating Policy Analysis And Liberal Arts Into The Traditional Engineering Classroom, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Science in diplomacy, the use of trained scientist to inform and support foreign policy objectives, has been a part of U.S. foreign policy since the time of Benjamin Franklin. The Diplomacy Laboratory project, a public-private partnership, allows the Department of State to 'course source' projects to seek input from universities and to recruit talented students to consider careers in diplomacy. This paper provides a summary of a case study using a DipLab project as part of a term-length, writing assignment in courses for undergraduate and graduate environmental engineering students. An overview of DipLab and suggested best practices to integrate DipLab …

Using Nursing Theory To Improve The Teaching Of Engineering Practice, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineering education includes both classroom training in sciences and professional skills as well as learning-through-doing to integrate practice and engineering design into the future licensed Professional Engineer (PE). In a similar manner, nursing education includes both classroom training in sciences and professional skills as well as learning through doing to integrate practice and caring into the future licensed Registered Nurse (RN). From the mid-19th century until modern day, the fields of environmental engineering and community health nursing have worked side-by-side to prevent disease while promoting health and wellness. This paper provides a synthesis of previously published case studies by the …

Code Decomposition: A New Hope, Nupur Garg

Master's Theses

Code decomposition (also known as functional decomposition) is the process of breaking a larger problem into smaller subproblems so that each function implements only a single task. Although code decomposition is integral to computer science, it is often overlooked in introductory computer science education due to the challenges of teaching it given limited resources.

Earthworm is a tool that generates unique suggestions on how to improve the decomposition of provided Python source code. Given a program as input, Earthworm presents the user with a list of suggestions to improve the functional decomposition of the program. Each suggestion includes the lines …

On The Impact Of Android Api Evolution On Education Materials, Kennedy Owen

Master's Theses

The recent growing popularity of mobile devices has led to the establishment of several popular mobile platforms such as the Android operating system. To foster growth in this evolving market, Application Programming Interfaces (APIs) were created to enable developers to create mobile device applications that utilize mobile device features and functionality for personal or widespread commercial use. However, as a result of excessive device and API evolution, mobile development faces increasingly complex issues, including an alarmingly rapid decay of development resources.

This thesis conducts a case study around one such resource: a series of Android app development lab …

Impacts Of Professional Development In Integrated Stem Education On Teacher Self-Efficacy, Outcome Expectancy, And Stem Career Awareness, John Geoffrey Knowles

Purdue Polytechnic Doctoral Dissertations

This research analyzed the effects of teacher professional development and lesson implementation in integrated Science, Technology, Engineering, and Math (STEM) on: 1.) Teacher self-efficacy and their confidence to teach specific STEM subjects; 2.) Teaching outcome expectancy beliefs concerning the impact of actions by teachers on student learning; and 3.) Teacher awareness of STEM careers. High school science and technology education teachers participating in the Teachers and Researchers Advancing Integrated Lessons in STEM (TRAILS) project experimental group attended a ten-day summer professional development institute designed to educate teachers in using an integrated STEM education model to implement integrated STEM lessons. The …

Improvement Of Fluorescence-Based Microfluidic Dna Analyzers, Collin Tranter

Doctoral Dissertations

A tremendous effort continues in the development of micro-total-analysis-systems; in support of this, many chemical passivation methods have been developed to enhance the biocompatibility of such microfluidic systems. However, the suitability of these passivation techniques to many fluorescence-based assays still remains inconsistent. This part of this work is focused on the performance of a third generation intercalating DNA dye when used within microfluidic devices treated with a select variety of passivating coatings. The results of these tests indicate that passivation coatings which are intended to shed DNA based on electrostatic repulsion will in fact imbibe the fluorescent DNA intercalating dye …

The Utilization Of Peer Mentorship And Its Positive Impact On Student Retention, Timothy B. Holt, Jacqueline Luedtke, Claire Schindler

Publications

In recognition of increasing rates of repeated ground schools and flight lessons, in combination with decreasing retention rates in the flight programs at Embry-Riddle Aeronautical University, the Department of Aeronautical Science in the College of Aviation took initiative to create a program that identified struggle students before they reached excessive failure or financial distress. The students identified in the Student Success Initiative (SSI) after being assessed would be required to attend a mediation session with their academic and flight training staff in order to create a specialized training program.

• Student Success Initiative (SSI)
• Identifies "at risk" students
• Implemented training plan …

Computer Science Technology Education: An Incredible Explosion, Iwasan D. Kejawa

School of Computing: Faculty Publications

This paper explore what computers are, their usages and their functionalities. Computers can be used to learn or comprehend the understanding of all subjects, be it physics aerobics, swimming, biology, mathematics, agriculture, chemistry, business administration or commerce, just to name a few. In education, computers are used to project information to individuals in the classrooms or anywhere education is taking place, in churches, homes, schools, conference halls and so on. It is also used to convey the logic of a subject or behind a topic. Computers play an important role in educating our mind. With the usage of computers, we …

A Study Of Mathematics Achievement, Placement, And Graduation Of Engineering Students, Sara Hahler Blazek

Doctoral Dissertations

The purpose of this study was to determine how background knowledge impacts freshmen engineering students' success at Louisiana Tech University in terms of grades in two different freshman classes and graduation. To determine what factors impact students, three different studies were implemented. The first study used linear regression to analyze which demographic and academic variables significantly impacted freshman math and engineering courses. Using regression discontinuity, the second study determined if the university's placement requirement for Pre-Calculus was appropriate. The final study analyzed factors that impact graduation for engineering students as well as other disciplines to determine which significant variables were …

Creative Confidence In Organizational Knowledge Creation: A Synthesis Of The Literature, Elnaz Dario, Rafael Landaeta, Resit Unal, E.H. Ng. (Ed.), B. Nepal (Ed.), E. Schott (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Creative confidence is a newly rising topic in the innovation study area. In a world where creativity has become a vital source of knowledge creation, not believing in one's own creative capacity could be a barrier. At the organizational level, many good ideas are disappearing before ever being written down or shared. Organizations may lose talented people who have great creative potential by either not giving them the opportunity to express their creative ideas or due to a lack of confidence from the employee side, in sharing these ideas. This paper will contribute to the research stream on the role …

Lifelong Learning: A Strategic Analysis Of Education, Iwasan D. Kejawa Ed.D

Department of Teaching, Learning, and Teacher Education: Faculty Publications

Are outdated traditional education, distance education, information technological infrastructure, partnerships and financial resources common problematic issues facing many of the educational institutions in our world today? With this into considerations, are these issues vital in order to stabilize the political and economic embroidery of an institution or organization, and its psychological and sociological awareness? What is it that is to be learned and thought in our institutions and, what really is lifelong education; and how is to be carried out in the society of ours? It is found that education may be the training of the mind to perform desire …

Manual Revision Process For Project-Based Laboratory Instruction, Gene Hou, Feifei Zhong, Orlando M. Ayala

Mechanical & Aerospace Engineering Faculty Publications

A four-step laboratory manual revision process was developed in this study based upon a technical writing process for supporting project-based laboratory classes. The audience and the objectives of this type of laboratory manuals are quite different from those of traditional, descriptive laboratory classes. The project-based laboratory manual has to serve as both an operational handbook and a theoretical textbook. The proposed four-step manual revision process was implemented in the fall 2016 semester in a 3-credit, senior elective class which was built upon a commercially-rated finite element analysis software package. Student surveys and evaluations showed that the revision process greatly increased …

Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews

Conference papers

This paper describes the background to and execution of a postgraduate project undertaken by students on DIT's MSc in Geospatial Engineering (GeoEng) in support of a project on level 2 BIM being undertaken by students on the MSc in applied Building Information Modelling & Management (aBIMM) around the retrofit of and new build extension to the Grangegorman Clock Tower Building. In support of this requirement, an external and internal survey of the existing structure and its surrounding topography was required. The aBIMM students and staff acted as the Design Team who subcontracted the Geo Eng group who were organised into …

Implementing Peer-Review Activities For Engineering Writing Assignments, Stacie I. Ringleb, Orlando M. Ayala, Jennifer Kidd

Mechanical & Aerospace Engineering Faculty Publications

Professional engineers spend a considerable portion of their day writing, yet disciplinary writing skills are not addressed in many engineering courses. This study investigates peer review as a mean to enhance student writing in engineering courses. Students completed formative peer reviews using an online peer review system for a group project in a fluid mechanics course (with online and face-to-face sections) and for an individual writing assignment in a senior capstone class in mechanical engineering. A university-wide rubric for disciplinary writing was used to assess student writing performance on interim and final assignments completed over the course of a semester. …

Institutionalizing Continuous Improvement Plan In An Engineering Technology Department- Closing The Loop, Alok K. Verma, Stephanie G. Adams, Cheng Y. Lin, Nestor Escobales, Isaac L. Flory Iv

Engineering Technology Faculty Publications

Continuous improvement is a corner stone of a quality engineering or engineering technology program. Accreditation Board of Engineering and Technology requires that a well-planned and implemented continuous improvement plan should be in place. The ABET 2015-16 Criterion 4 Continuous Improvement1 states: "The program must regularly use appropriate, documented processes for assessing and evaluating the extent to which the student outcomes are being attained. The results of these evaluations must be systematically utilized as input for the continuous improvement of the program. Other available information may also be used to assist in the continuous improvement of the program." A successful continuous …

Analytical-Based Methodologies To Examine In Vitro Nanokinetics Of Silver Nanoparticles, Sesha Lakshmi Arathi Paluri

Browse all Theses and Dissertations

Advancements in the nanotechnology have taken a huge leap in 21st century resulting in 1814 consumer products containing nanomaterials. About 47% of these products belong to the health and fitness sector and ~24% utilize silver nanoparticles (AgNPs). Despite the promising biomedical applications of AgNPs (e.g. bone cements, contrasting agents, and drug-carriers), lack of standardized methods for examining their nanokinetics (i.e., Absorption, Distribution, Metabolism, and Elimination (ADMEs)) limit their clinical implementation. The current work addresses this knowledge gap by developing analytical-based approaches for studying in vitro ADMEs of AgNPs. To demonstrate the versatility of these methodologies, two in vitro kidney study …

Exploration Of A Confidence-Based Assessment Tool Within An Aviation Training Program, Paul F. Novacek

Journal of Aviation/Aerospace Education & Research

Traditional use of multiple-choice questions reward a student for guessing. This technique encourages rote memorization of questions to pass a lengthy exam, and does not promote comprehensive understanding or subject correlation. In an effort to identify guessing on answers during an exam within a safety-critical aviation pilot training course, a qualitative research study was undertaken that introduced a confidence-based element to the end-of-ground-school exam. Confidence-based assessments consist of students’ self-reported level of certainty in their responses, indicating which answers they believe are correct while also indicating how confident they feel with their selections. The research goals were to clearly identify …

Broadening Traditional Aviation Meteorology Education To Support Spaceflight Operations, Thomas A. Guinn, Nicholas J. Stapleton, Katherine A. Winters, Bradley M. Muller, Debbie M. Schaum

Journal of Aviation/Aerospace Education & Research

The purpose of this paper is to examine the expansion of traditional aviation meteorology education necessary to support the growing commercial space-operations industry. While spaceflight meteorological considerations do overlap with those of traditional aviation operations, there are notable differences schools must address for appropriate education and training of both meteorologists and operators. These include knowledge of increased weather sensitivities, space-weather impacts, triggered lightning, triboelectrification, and high-resolution vertical wind-profile analyses. An added challenge in the educational process is the more limited amount of publicly available weather and space-weather products necessary to support spaceflight education. Furthermore, in comparison with traditional aviation meteorology, …

Integrative Experiences Through Modeling And Simulation Of Mechatronic Systems, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao, Petros J. Katsioloudis

Engineering Technology Faculty Publications

Learning is integrative lifelong process which requires continuous refreshing of old material and learning new material. This principle holds also for student experiences during their undergraduate studies. Students learn new material throughout their studies, and they may or may not have opportunity to use the material in different context and at different levels. As a result some of the acquired knowledge may be forgotten by the time student graduates or it may not be placed in the context of the overall program outcomes, thus material presented may not seem to have relevance to student's career. An effective method to address …

Applying Technology To Improve Student Learning Outcomes In Dynamics Course, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao

Engineering Technology Faculty Publications

Motivating and stimulating students to learn material in required core engineering courses is difficult and yet essential in assuring student success. Traditional methods of teaching and learning need to be reconsidered and modified to meet student expectations and their continuously evolving ways of interaction with technology and social networks. Numerous faculty have been experimenting with various approaches which are taking advantages of both technology and student interaction with technology, with various degrees of success. In this paper authors present another comprehensive method applied in teaching/learning of core engineering mechanics course. It has been observed over a long period of time …

Flipped Classroom As Blended Learning In A Fluid Mechanics Course In Engineering Technology, Orlando M. Ayala, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Flipped classroom has gained attention in recent years as a teaching method in which the time allocated for introducing new concepts and the time used for practicing them are inverted, in order to provide more time for problem based learning and class interaction under direct supervision of the instructor. The implementation of this teaching method is comprised of two main components, the pre-class activities, which consist of individual student work and are largely based on pre-recorded videos, and in-class activities, which are group activities supervised by the instructor. This paper discusses the implementation of the flipped classroom method in a …

Learning Module On Electric Motors Modeling, Control, And Testing (Lm-Emmct), Ana Djuric, Vukica M. Jovanovic, Ece Yaprak, Wen Chen

Engineering Technology Faculty Publications

The objective of this paper is to develop and integrate a learning module on Electric Motors Modeling, Control and Testing (EMMCT) into the Electrical Engineering Technology (EET) and Mechanical Engineering Technology (MET) programs. Preparing future engineers to work in highly automated production requires proper education and training in mechatronics theory and applications. Although Engineering Technology programs at various universities offer various courses related to the controls, electrical motors, and automation, they are not including the same methods when it comes to the selection of appropriate electrical motor for a specific application in mechatronic system. MET student do have exposure to …

Hands-On Learning Environment And Educational Curriculum On Collaborative Robotics, Ana Djuric, Jeremy L. Rickli, Vukica M. Jovanovic, Daniel Foster

Engineering Technology Faculty Publications

The objective of this paper is to describe teaching modules developed at Wayne State University integrate collaborative robots into existing industrial automation curricula. This is in alignment with Oakland Community College and WSU’s desire to create the first industry-relevant learning program for the use of emerging collaborative robotics technology in advanced manufacturing systems. The various learning program components will prepare a career-ready workforce, train industry professionals, and educate academicians on new technologies. Preparing future engineers to work in highly automated production, requires proper education and training in CoBot theory and applications. Engineering and Engineering Technology at Wayne State University offer …

Eliminating The Illusion Of Learning From Engineering Courses, Jason Weaver

Faculty Publications

This paper describes the efforts of the author to incorporate tools into an undergraduate engineering course to help facilitate better learning and assess proficiency more effectively by avoiding the illusion of learning. Several techniques are used, including suggestions from the recent book Make It Stick by Brown, Roediger, and McDaniel. Student feedback and instructor observations are discussed, and future recommendations for the course are given

Get Rid Of Your Student's Fear And Intimidation Of Learning A Programming Language, Christina Frederick, Matt B. Pierce, Andrew Calvin Griggs, Lulu Sun, Li Ding

Publications

Knowledge of computer programming is very beneficial and often required for engineering students. Unfortunately, students frequently experience fear and intimidation regarding introductory programming courses. Second language acquisition (SLA) techniques have shown promise as a means of content delivery in programming courses. Blended learning environments are also becoming increasingly popular in course frameworks. This workshop will discuss the application of second language acquisition in a blended learning environment (SLA-aBLe) and will examine the effectiveness of using SLA techniques to teach introductory programming. The proposed workshop will also share instructor experience(s), provide course materials, and review student outcomes from this two year …

Work In Progress: Using Second Language Acquisition Techniques To Teach Programming - Results From A Two-Year Project, Christina Frederick, Lulu Sun

Publications

This WIP paper presents two years of findings for an NSF funded project under the Research Initiation Grant in Engineering Education (RIGEE) program. The project (SLA-aBLe) is currently in the second year of implementation and assessment. Final results from the project will be presented and discussed at the annual ASEE conference. The project used second language acquisition (SLA) theory and techniques to facilitate learning in an introductory programming language class. The project was developed by a multi-disciplinary team and involved multiple instructors and sections of an introductory programming language class using MATLAB. Each semester, instructors trained in SLA techniques taught …

The Application Of Second Language Acquisition To Programming Language Study, Lulu Sun, Christina Frederick, Li Ding, Rebecca Rohmeyer

Publications

This paper describes a design and implementation of a Second Language Acquisition in a Blended Learning (SLA-aBLe) project that aims to examine the efficacy of SLA approaches for teaching programming language. The project, which has been running for three semesters, modifies specific learning modules in a programming language class using a series of shorter videos with subtitles, online quizzes with tiered questions and comments, and a topic specified discussion board with Q&A sections. The SLA aspect of the SLA-aBLe study is emphasized through the use of strategies defined as best-practice SLA techniques, such as the inclusion of self-testing tired questions …

Students' Explanations In Complex Learning Of Disciplinary Programming, Camilo Vieira

Open Access Dissertations

Computational Science and Engineering (CSE) has been denominated as the third pillar of science and as a set of important skills to solve the problems of a global society. Along with the theoretical and the experimental approaches, computation offers a third alternative to solve complex problems that require processing large amounts of data, or representing complex phenomena that are not easy to experiment with. Despite the relevance of CSE, current professionals and scientists are not well prepared to take advantage of this set of tools and methods. Computation is usually taught in an isolated way from engineering disciplines, and therefore, …