Engineering Commons^™

Cfd Simulation Of The Thermal Performance Of A Parallel Counter-Parallel Flow Heat Exchanger For The Treatment Of Hypothermia, Alex Heller

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hypothermia is a life-threatening condition. Currently, active warming methods are the most effective treatment for dysthermic patients. The aim of this study is to investigate the use of computational fluid dynamics (CFD) in evaluating the thermal performance of a parallel/counter-parallel flow heat exchanger used as part of a fluid warmer to treat Hypothermia. The 3D model of the heat exchanger is divided into three regions; Infusate (fluid to be heated), Hot Water (heating fluid), and a Solid Region (wall). At the end of the heat exchanger, an elbow section is used to create the counter-parallel flow arrangement specific to this …

Validation Of A Modified Version Of Overflow 2.2 For Use With Turbomachinery Under Clean And Total Pressure Distorted Conditions And A Study Of Blade Loading In Distortion, Matthew L. Marshall

Theses and Dissertations

Inlet distortion is an important consideration in fan performance. Distortion can be generated through flight conditions and airframe-engine interfaces. The focus of this paper is a series of high-fidelity, time-accurate Computational Fluid Dynamics (CFD) simulations of a multistage fan, investigating distortion transfer, distortion generation, and the underlying flow physics under different operating conditions. The simulations are full annulus and include 3 stages and the inlet guide vane (IGV). The code used to carry out these simulations is a modified version of Overflow2.2 that was developed as part of the Computational Research and Engineering Acquisition Tools and Environment (CREATE) program. The …

High Fidelity Time Accurate Cfd Analysis Of A Multi-Stage Turbofan At Various Operating Points In Distorted Inflow, David Bruce Weston

Theses and Dissertations

Inlet distortion is an important consideration in fan performance. Distortion can be caused through flight conditions and airframe-engine interfaces. The focus of this paper is a series of high-fidelity time accurate Computational Fluid Dynamics (CFD) simulations of a multistage fan. These investigate distortion transfer and generation as well as the underlying flow physics of these phenomena under different operating conditions. The simulations are performed on the full annulus of a 3 stage fan. The code used to carry out these simulations is a modified version of OVERFLOW 2.2 developed as part of the Computational Research and Engineering Acquisition Tools and …

In Vitro Validation Of Patient-Specific Hemodynamic Simulations In Coronary Aneurysms Caused By Kawasaki Disease, Ethan Kung, Andrew M. Kahn, Jane C. Burns, Alison Marsden

Publications

To perform experimental validation of computational fluid dynamics (CFD) applied to patient specific coronary aneurysm anatomy of Kawasaki disease. We quantified hemodynamics in a patient-specific coronary artery aneurysm physical phantom under physiologic rest and exercise flow conditions. Using phase contrast MRI (PCMRI), we acquired 3-component flow velocity at two slice locations in the aneurysms. We then performed numerical simulations with the same geometry and inflow conditions, and performed qualitative and quantitative comparisons of velocities between experimental measurements and simulation results. We observed excellent qualitative agreement in flow pattern features. The quantitative spatially and temporally varying differences in velocity between PCMRI …

Effects Of Crossflow In An Internal-Cooling Channel On Film Cooling Of A Flat Plate Through Compound-Angle Holes, Zachary Taylor Stratton

Open Access Theses

The film-cooling holes in turbine blades are fed from an internal cooling channel. This channel imposes a crossflow at the entrance of the holes that can significantly affect the performance of the cooling jets that emanate from those holes. In this study, CFD simulations based on steady RANS with the shear-stress transport (SST) and the realizable k -ε turbulence models were performed to study film cooling of a flat plate with cooling jets issuing from eight round holes with a compound angle of 45 degrees, where the coolant channel that fed the cooling jets was oriented perpendicular to the direction …

Cfd Black Liquor Bed Simulation, Benjamin Ohran, Dr. Larry Baxter

Journal of Undergraduate Research

The objective of this project was to further the understanding of the bed region of a black liquor recovery boiler. The net output of carbon dioxide from burning black liquor (a paper pulping by-product) is zero, making it a desirable alternative fuel source; however, there are other problems associated with burning black liquor such as boiler fouling, and emissions of pollutants. With the understanding gained from this project it will be possible to further improve the efficiency and emissions of black liquor boilers, making it a more viable fuel alternative.

Flight And Stability Of A Laser Inertial Fusion Energy Target In The Drift Region Between Injection And The Reaction Chamber With Computational Fluid Dynamics, Tiffany Leilani Mitori

Master's Theses

A Laser Inertial Fusion Energy (LIFE) target’s flight through a low Reynolds number and high Mach number regime was analyzed with computational fluid dynamics software. This regime consisted of xenon gas at 1,050 K and approximately 6,670 Pa. Simulations with similar flow conditions were performed over a sphere and compared with experimental data and published correlations for validation purposes. Transient considerations of the developing flow around the target were explored. Simulations of the target at different velocities were used to determine correlations for the drag coefficient and Nusselt number as functions of the Reynolds number. Simulations with different target angles …

Numerical Investigation Of Boiling In A Sealed Tank In Microgravity, Sonya Lynn Hylton

ETD Archive

NASA's missions in space depend on the storage of cryogenic fluids for fuel and for life support. During long-term storage, heat can leak into the cryogenic fluid tanks. Heat leaks can cause evaporation of the liquid, which pressurizes the tank. However, when the tanks are in a microgravity environment, with reduced natural convection, heat leaks can also create superheated regions in the liquid. This may lead to boiling, resulting in much greater pressure rises than evaporation at the interface between the liquid and vapor phases. Models for predicting the pressure rise are needed to aid in developing methods to control …

Computational And Experimental Study On Vertical Axis Wind Turbine In Search For An Efficient Design, Mohammad M. Bashar

College of Graduate Studies: Theses & Dissertations

Wind alone can fulfill most of the energy requirement of the world by its efficient conversion in to energy. Though Horizontal Axis Wind Turbine (HAWT) is more popular but needs high wind speed to generate energy. On the other hand Vertical Axis Wind Turbine (VAWT) needs low wind speed and can be installed anywhere which are some of the reasons for this research. The main objective of this research is to improve the design and performance of VAWT to make it more attractive, efficient, durable and sustainable. For a VAWT the blades perform the main role to extract energy from …

Simulations And Measurements Of Fuel Film Using Refractive Index Matching Method, Fengkun Wang

Wayne State University Theses

ABSTRACT

SIMULATIONS AND MEASUREMENTS OF FUEL FILM USING REFRACTIVE INDEX MATCHING METHOD

by

FENGKUN WANG

APRIL 2014

Advisor: Dr. Ming-Chia Lai

Major: Mechanical Engineering

Degree: Master of Science

Direct Injection (DI) has been known for its improved performance and efficiency in gasoline spark-ignition engines. However, wall wetting is inevitable and the source of UHC and PM. In order to take advantage of the GDI technology, it is important to investigate spray wall interactions in detail.

Numerical and experimental studies are carried out for spray and wall impingements in an optical constant volume vessel. The fuel film was measured spatially and …

Fluid-Structure Interaction Simulations Of A Flapping Wing Micro Air Vehicle, Alex W. Byrd

Browse all Theses and Dissertations

Interest in micro air vehicles (MAVs) for reconnaissance and surveillance has grown steadily in the last decade. Prototypes are being developed and built with a variety of capabilities, such as the ability to hover and glide. However, the design of these vehicles is hindered by the lack of understanding of the underlying physics; therefore, the design process for MAVs has relied mostly on trial-and-error based production. Fluid-Structure Interaction (FSI) techniques can be used to improve upon the results found in traditional computational fluid dynamics (CFD) simulations. In this thesis, a verification of FSI is first completed, followed by FSI MAV …

Analysis Of A Ventilation Network In A Multiple Fans Limestone Mine, Ali Haghighat

Masters Theses

"As mining progresses the total resistance of an excavation is increased, the mine characteristic curve becomes steeper, and the operating point moves up the fan curve, reducing the total air quantity and increasing the system pressure. For multi-level ventilation networks with a number of fans the process can be tedious, and on a count of numerous dependent factors the optimal combination of fans is very hard to be achieved. The design of a ventilation network in conjunction with multi surface fans and booster fans entails a complex procedure.

The objective of this study is to provide a plan to improve …

Numerical Investigation Of Impact Of Relative Humidity On Droplet Accumulation And Film Cooling, Luz Irene Bugarin

Open Access Theses & Dissertations

During the summer, high inlet temperatures affect the power output of gas turbine systems. Evaporative coolers have gained popularity as an inlet cooling method for these systems. Wet compression has been one of the common evaporative cooling methods implemented to increase power output of gas turbine systems due to its simple installation and low cost. This process involves injection of water droplets into the continuous phase of compressor to reduce the temperature of the flow entering the compressor and in turn increase the power output of the whole gas turbine system. This study focused on a single stage rotor-stator compressor …

Characterizing Cryogenic Propellant Flow Behavior Through A Cavitating Venturi In Comparison To Alternative Flow Control Mechanisms, Marjorie Adele Ingle

Open Access Theses & Dissertations

The work detailed is an investigation of the use of a cavitating venturi as both a flow control and metering device. This was achieved through the combination of actual experimentation and numerical modeling of the fluid behavior of both liquid water and liquid methane as it passes through the test article designed, developed, and validated here within this study. The discharge coefficient of the cavitating venturi was determined through weigh flow calibration testing to determine an average mass flow rate. Turbine flow meter flow rate readings were used as a point of comparison and the discharge coefficient was computed. The …

Computational Investigation Of Rotary Engine Homogeneous Charge Compression Ignition Feasibility, Michael Irvin Resor

Browse all Theses and Dissertations

The Air Force Research Laboratory (AFRL) has been investigating the heavy fuel conversion of small scale Unmanned Aerial Vehicles (UAV). One particular platform is the Army Shadow 200, powered by a UEL Wankel rotary engine. The rotary engine historically is a proven multi-fuel capable engine when operating on spark ignition however, little research into advanced more efficient compression concepts have been investigated. A computational fluid dynamics model has been created to investigate the feasibility of a Homogeneous Charge Compression Ignition (HCCI) rotary engine. This research evaluates the effects, rotor radius to crankshaft eccentricity ratio, known as K factor, equivalence ratio, …

Cfd Assessment Of Respiratory Drug Delivery Efficiency In Adults And Improvements Using Controlled Condensational Growth, Ross L. Walenga

Theses and Dissertations

Pharmaceutical aerosols provide a number of advantages for treating respiratory diseases that include targeting high doses directly to the lungs and reducing exposure of other organs to the medication, which improve effectiveness and minimize side effects. However, difficulties associated with aerosolized drug delivery to the lungs include drug losses in delivery devices and in the extrathoracic region of human upper airways. Intersubject variability of extrathoracic and thoracic drug deposition is a key issue as well and should be minimized. Improvements to respiratory drug delivery efficiency have been recently proposed by Dr. P. Worth Longest and Dr. Michael Hindle through the …

High Fidelity Chemistry And Radiation Modeling For Oxy-Combustion Scenarios, Hassan A. Abdul Sater

Theses and Dissertations

To account for the thermal and chemical effects associated with the high CO₂ concentrations in an oxy-combustion atmosphere, several refined gas-phase chemistry and radiative property models have been formulated for laminar to highly turbulent systems. This thesis examines the accuracies of several chemistry and radiative property models employed in computational fluid dynamic (CFD) simulations of laminar to transitional oxy-methane diffusion flames by comparing their predictions against experimental data. Literature review about chemistry and radiation modeling in oxy-combustion atmospheres considered turbulent systems where the predictions are impacted by the interplay and accuracies of the turbulence, radiation and chemistry models. Thus, …

Computational And Experimental Comparison Of A Powered Lift, Upper Surface Blowing Configuration, Jay M. Marcos

Master's Theses

In the past, 2D CFD analysis of Circulation Control technology have shown poor comparison with experimental results. In Circulation Control experiments, typical results show a relationship between lift coefficient, CL, vs blowing momentum coefficient, Cμ. CFD analysis tend to over-predict values of CL due to gridding issues and/or turbulence model selection. This thesis attempted to address both issues by performing Richardson’s Extrpolation method to determine an acceptable mesh size and by using FLUENT’s 2-equation turbulence models. The experimental results and CAD geometry were obtained from Georgia Tech Research Institute for comparison with the CFD analysis.

The study showed that 3D …

Two-Equation Two-Fluid Model For Bubbly Flow In A Vertical Channel, Jeffrey Feliszak, Martin Bertodano

The Summer Undergraduate Research Fellowship (SURF) Symposium

The one-dimensional two-fluid model is widely acknowledged as the most detailed and accurate macroscopic formulation of the thermo-fluid dynamics in nuclear reactor safety analysis. Several thermo-fluid dynamics codes have sprung up based on the one dimensional two-fluid model, such as RELAP5, TRAC, RETRAN, CATHARE, etc. However, these codes are quasi-steady because they lack the short wavelength models that are necessary to make the models well-posed; therefore they must rely on excessive numerical viscosity. Not utilizing short wavelength models causes small wavelength waves to grow quickly to infinity. The project objective is to develop a drafting force model for a one …

Experimental And Computational Assessment Of Mechanical Circulatory Assistance Of A Patient-Specific Fontan Vessel Configuration, Steven Chopski

Theses and Dissertations

The treatment of single ventricle anomalies is a formidable challenge for clinical teams caring for patients with congenital heart disease. Those patients fortunate to survive surgical palliation contend with lifelong physical limitations and late stage pathophysiology. A mechanical blood pump specifically designed to increase pressure in the great veins would augment flow through the lungs and provide hemodynamic stability until a donor heart is located. To support the development of such medical devices, this research characterized the fluid dynamics of mechanical assistance in the Fontan circulation by performing numerical analyses and particle image velocimetry (PIV) studies in a patient-specific in …

An Investigation Of Phase-Change Effects During Rapid Compression Machine Experiments, Colin Banyon

Master's Theses (2009 -)

Rapid compression machines (RCMs) are well characterized laboratory scale devices capable of achieving internal combustion (IC) engine relevant thermodynamic environments. These machines are often used to collect ignition delay times as targets for gas-phase chemical kinetic fuel autoigntion models. Modern RCMs utilize creviced piston(s) to improve charge homogeneity and allow for an adequate validation of detailed chemistry mechanisms against experiments using computationally efficient, homogeneous reactor models (HRMs). Conventionally, experiments are preformed by introducing a premixed gas of fuel + oxidizer + diluent into the machine, which is compressed volumetrically via a piston. Experiments investigating low-vapor pressure fuels (e.g. diesels, biodiesels, …

Review Of Computer-Aided Numerical Simulation In Wind Energy, Aaron Miller, Byungik Chang, Roy Issa, Gerald Chen

Civil Engineering Faculty Publications

Many advances have been made during the last decade in the development and application of computational fluid dynamics (CFD), finite element analysis (FEA), numerical weather modeling, and other numerical methods as applied to the wind energy industry. The current information about this area of study may help researchers gage research efforts. Specifically, micro-siting, wind modeling and prediction, blade optimization and modeling, high resolution turbine flow modeling, support structure analysis, and noise prediction have been the main focuses of recent research. The advances in this area of research are enabling better designs and greater efficiencies than were possible previously. The trends …

Parametric Optimization Of Wind Turbine Blades, Brycee Mcewen, Dr. Steven Gorrell

Journal of Undergraduate Research

With ever increasing concerns about the production of greenhouse gases from burning fossil fuels, more and more emphasis is being placed on researching and developing alternative and renewable energy resources. One renewable energy source that has the potential to compete with conventional fossil fuels, is wind energy. In order for wind energy to be competitive, it is necessary to make improvements in both aerodynamic and structural properties of wind turbines.

Numerical Simulation Of Separated And Secondary Flows In Diffusing S-Ducts For Air Breathing Propulsion, Colin James Fiola

All Theses and Dissertations (ETDs)

No abstract provided.

Inviscid Analysis Of Extended Formation Flight, James Kless, Michael Aftosmis, Andrew Ning, Marian Nemec

Faculty Publications

Flying airplanes in extended formations, with separation distances of tens of wingspans, significantly improves safety while maintaining most of the fuel savings achieved in close formations. The present study investigates the impact of roll trim and compressibility at a fixed lift coefficient on the benefits of extended formation flight. An Euler solver with adjoint-based mesh refinement combined with a wake propagation model is used to analyze a two-body echelon formation at a separation distance of 30 spans. Two geometries are examined: a simple wing and a wing-body geometry. Energy savings, quantified by both formation drag fraction and span efficiency factor, …

Hazard Classification And Hydraulic Remediation Options For Flat-Topped And Ogee-Crested Low-Head Dams, Riley J. Olsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The dangerous hydraulic conditions that can form downstream of a low-head dam were investigated. These dangerous hydraulic conditions have been the cause of hundreds of drowning incidents since the construction of the first low-head dams. Two primary objectives were identified for this study, each of which were primarily performed using the Computational Fluid Dynamics software, Flow-3D^®, with physical models used to verify the numerical results. The first objective was the identification of a risk factor made up of easily measured parameters that could accurately predict when the dangerous hydraulic conditions are present at a low-head dam. The risk …

Development Of Cfd Models For The Purposes Of Exploring Free Surface Wave Phenomena, Leonard P. Stoehr

Masters Theses

With the push for finding alternative, green energy sources, the harnessing of energy from ocean and lake waves is becoming a more researched field. To fully understand the behavior of wave interactions and optimize designs to extract this energy, it is necessary to develop computer models that can accurately replicate this behavior. A case is presented in which previous work done using the wave tank found in the Western Michigan University fluids lab is examined. The case involves harnessing the energy generated by ocean waves through the usage of plates of different shapes resting horizontally on the water’s surface. The …

Design And Performance Of Circulation Control Geometries, Rory Martin Golden

Master's Theses

With the pursuit of more advanced and environmentally-friendly technologies of today’s society, the airline industry has been pushed further to investigate solutions that will reduce airport noise and congestion, cut down on emissions, and improve the overall performance of aircraft. These items directly influence airport size (runway length), flight patterns in the community surrounding the airport, cruise speed, and many other aircraft design considerations which are setting the requirements for next generation aircraft. Leading the research in this movement is NASA, which has set specific goals for the next generation regional airliners and has categorized the designs that meet the …

Multiscale Design And Life-Cycle Based Sustainability Assessment Of Polymer Nanocomposite Coatings, Rohan Ganesh Uttarwar

Wayne State University Dissertations

In recent years, nanocoatings with exceptionally improved and new performance properties have found numerous applications in the automotive, aerospace, ship-making, chemical, electronics, steel, construction, and many other industries. Especially the formulations providing multiple functionalities to cured paint films are believed to dominate the coatings market in the near future. It has shifted the focus of research towards building sustainable coating recipes which can deliver multiple functionalities through applied films. The challenge to this exciting area of research arrives from the insufficient knowledge about structure-property correlations of nanocoating materials and their design complexity. Experimental efforts have been successful in developing certain …

Predictive Modeling Of The Virtual Hemi-Fontan Operation For Second Stage Single Ventricle Palliation: Two Patient-Specific Cases, Ethan Kung, Alessia Baretta, Catriona Baker, Gregory Arbia, Giovanni Biglino, Chiara Corsini, Silvia Schievano, Irene E. Vignon-Clementel, Gabriele Dubini, Giancarlo Pennati, Andrew Taylor, Adam Dorfman, Anthony M. Hlavacek, Alison L. Marsden, Tain-Yen Hsia, Francesco Migliavacca

Publications

Single ventricle hearts are congenital cardiovascular defects in which the heart has only one functional pumping chamber. The treatment for these conditions typically requires a three-staged operative process where Stage 1 is typically achieved by a shunt between the systemic and pulmonary arteries, and Stage 2 by connecting the superior venous return to the pulmonary circulation. Surgically, the Stage 2 circulation can be achieved through a procedure called the Hemi-Fontan, which reconstructs the right atrium and pulmonary artery to allow for an enlarged confluence with the superior vena cava.

Based on pre-operative data obtained from two patients prior to Stage …