Engineering Commons^™

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Fenestration Studies On Building Energy Using The Facade Evaluation Facility, Wendell Cocina

UNLV Theses, Dissertations, Professional Papers, and Capstones

The project was developed to assess several types of facades and their influence on building energy, mainly focused on windows and other building fenestrations. Requirements for the facility are stated in this paper alongside corresponding solutions. The facility is designed to represent a section of a building façade. Experimenting on a wide range of fenestrations including windows with integrated PV elements was the primary prerequisite. The option of removable façade configurations was used and allowed testing specimens to be changed effortlessly. Instrumentation and data acquisition are discussed including calibration and uncertainty analysis. Investigation of the air conditioning unit was concluded …

Hydroclimatic Forecasting In The Western United States Using Paleoclimate Reconstructions And Data-Driven Models, Christopher Allen Carrier

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis investigated climate variability and their associated hydrologic responses in the western United States. The western United States faces the problem of water scarcity, where the management and mitigation of available water supplies are further complicated by climate variability. Climate variability associated with the phases of oceanic-atmospheric oscillations has been shown to influence streamflow and precipitation, where predictive relationships have led to the possibility of producing long-range forecasts. Based on literature review, four oceanic-atmospheric oscillation indices were identified in having the most prominent influence over the western United States including the El Niño - Southern Oscillation (ENSO), Pacific Decadal …

Design Of A Low Noise Amplifier For Wireless Sensor Networks, Ting Liu

Graduate Theses and Dissertations

CMOS technology becomes important in Radio Frequency (RF) communication systems which include both a receiver and a transmitter. In a high performance radio receiver, the Low Noise Amplifier (LNA) is the first circuit, and its noise performance dominates the entire receiver. Depending upon the system in which they are used, LNAs can be designed according to various topologies and structures. The LNA needs to have matched input impedance, and at the same time it should amplify the small amplitude input signal without adding too much noise and still have the minimal power consumption. It also needs a good interface with …

Degradation Of Polystyrene Foam Under Radiant Heat Flux, James Butler

Graduate Theses and Dissertations

As the demand for liquefied natural gas has increased, safety concerns about the performance of transport vessels under fire conditions have been raised. Current codes for the sizing of the pressure relief systems require that the vessels are able to withstand an emmissive heat flux of 108kW/m2 and do not take into account the effects of insulation loss due to thermal decomposition of the insulation materials. To address this possible oversight in the current code models were presented to a working group organized by the Society of International Gas Tanker and Terminal Operators Ltd. focusing on the decomposition rate of …

Water Quality Trends For Section 319 Priority Watersheds In Northwest Arkansas, 1997-2010, Bryan William Bailey

Graduate Theses and Dissertations

Northwest Arkansas contains two Section 319 Priority Watersheds that the Arkansas Natural Resources Commission (ANRC) has identified as being impacted by point and nonpoint sources of pollution (i.e., phosphorus, nitrogen, and sediment), and the Arkansas Water Resources Center (AWRC) has monitored the water quality at several sites within these watersheds. Water-quality data has been collected over the last decade within the Illinois River Watershed (HUC #11110103) and the Upper White River Basin (Beaver Reservoir HUC# 11010001), each watershed containing three sampling sites. The Illinois River Watershed sites are located on the Illinois River, Osage Creek, and Ballard Creek, and the …

Photodetectors And Photovoltaic Devices Based On Semiconductor Nanomaterials, Jiang Wu

Graduate Theses and Dissertations

Photodetectors based various nanostructures and plasmon enhanced solar cells are investigated in this dissertation. The motivation of the dissertation rise is driven by urgent need of both high efficiency photodetectors and solar cells.

First, quantum dot infrared photodetectors have been intensely investigated due to their promise in high performance photodetectors. However, the strain-driven growth of quantum dots has hindered the progress of quantum dot photodetectors. The presence of strain in the device presents complexity in designing as well as defects. Therefore, in this project, new designs of quantum dot photodetector structures are presented to improve the control over detection wavelength. …

Investigation Of A Floating Load Buck Dc-Dc Switching Converter, Hong Tan

Graduate Theses and Dissertations

A floating load buck DC-DC switching converter was analyzed, simulated, designed and prototyped. The floating load buck converter is first compared to the conventional buck converter. It was found that both the floating load buck converter and conventional buck converter exhibit similar conversion characteristics despite the differences in the placement of their output inductors. A floating load buck converter was designed to be used as a high-voltage off-line light-emitting diodes (LEDs) driver using a Texas Instruments' TPS92001 controller. Finally, the characteristics of this floating load buck converter LED driver were experimentally examined.

Development Of Spray Cooling For High Heat Flux Electronics, Jeremy Scott Junghans

Graduate Theses and Dissertations

The thermal demands of modern day electronic systems require innovative thermal solutions. Spray cooling has proven to be able to cool heat fluxes orders of magnitude higher than traditional cooling methodologies. This work includes a comparison of spray cooling to standard thermal management methodologies. Key system parameters and considerations are discussed. The properties of available packaging materials and their effect on the reliability of a spray cooled system are presented. Parameters such as fluid temperature, droplet size, fluid velocity and flow rate all directly impact performance and are detailed in this work. Finally, results from of a wide range of …

Design And Implementation Of Metamaterial Based Strain Sensor Using Aperture Coupled Antenna, Michael Brandon Buscher

Graduate Theses and Dissertations

Strain sensors are used to convert the physical measured quantity of strain into an electrical signal suitable for processing by electronic equipment. Traditional strain sensors are comprised of a thin flexible film with a resistive pattern traced on the surface. As the sensor is deformed, the electrical resistance changes proportionally, giving a direct measure of the strain incurred. Metamaterials, particularly split ring resonators (SRR), lend themselves as a valuable tool for sensing applications due to their highly resonant nature and their very narrow bandwidth (high Q-factor). Due to very high field localization effects, they are extremely sensitive to both the …

Modeling And Characterization Of P-Type Silicon Carbide Gate Turn Off Thyristors, Osama Shihadeh Saadeh

Graduate Theses and Dissertations

Silicon carbide (SiC) power semiconductor devices have emerged in the past decade as the most promising technology for next generation power electronic applications ranging for electric vehicles to grid-connected power routing and conversion interfaces. Several devices have been developed, and even some have been released commercially, including diodes, MOSFETs, JFETs, thyristors, gate turn-off thyristors, and IGBTs. The model development, characterization and experimental validation of SiC p-type Gate Turn-off Thyristors (GTO) is presented in this work. The GTO device in this work is being used as part of a SiC-based solid-state fault current limiter under development at the University of Arkansas' …

Laboratory Evaluation Of Dynamic Characterization Methods For Rapid Condition Assessment Of Bridges, Jason Kyle Herrman

Graduate Theses and Dissertations

The objective of this thesis was to devise and refine Structural Health Monitoring methods and the associated quantitative characterization methods with the specific goal of enabling rapid and reliable safety evaluations of bridges following natural or manmade hazards. Presently, the safety and serviceability of these transportation infrastructure assets for use in emergency response and recovery operations are evaluated through on-site visual inspections of individual structures by teams of specially trained engineers or technicians; a process that is manpower-intensive, subjective, and slow. Specifically, the researcher was able to identify and evaluate strategies and procedures for using dynamic testing methods to rapidly …

Development And Implementation Of Challenge-Based Instruction In Engineering Graphics, Gregory A. Potter

Theses and Dissertations - UTB/UTPA

This thesis discusses the challenge-based instructional (CBI) lessons currently being developed for the Engineering Graphics course at UTPA. This endeavor concentrates on student retention, as well as the students’ ability to practically apply their new skills. Minority science, technology, engineering, and math (STEM) students have been found, in recent studies, to depart from STEM undergraduate fields to some extent because of the lack of real world connections to the subject matter. Also, the traditional way of teaching theory first and then assigning a task may actually stifle creative thought and innovation required in later STEM courses. Our use of CBI …

Development Of Laboratory Based Smart Micro Grid To Be Used As An Educational Tool, Jose L. Sanchez

Theses and Dissertations - UTB/UTPA

The increasing trend of the energy industry to move towards a new smart power grid has pushed researchers to address the challenges that this represents. Universities all around the world are also under pressure to better prepare their students to meet the challenges that await them with this new technology and techniques. The work presented on this thesis was motivated by the current need of the electrical engineering curriculum to include new material into their current courses. A laboratory based smart micro grid was created by applying several concepts and techniques currently being adopted by the energy industry to make …

Characterizing And Optimizing The Molten Salt Cleaning, Yangyang Long

Theses and Dissertations - UTB/UTPA

Molten salt cleaning is an important cleaning approach in remanufacturing which can remove a variety of contaminants from metal substrates with high efficiency. Facing the very limited research of this approach in literature, this thesis intends to characterize molten salt cleaning process and optimize its parameters when big parts with complicated shapes are cleaned. Based on the development of molten salt cleaning and studies on contaminations, two experiments are conducted. The first one investigates the influences of the hot salts on three metal substrates and shows the applicable of cleaning carbon steel and grey iron parts with molten salt. The …

Using Discrete Event Computer Simulation To Analyze The Effects Of Proposed Changes To Personnel In A Hospital Medical Laboratory, Gerardo Morales

Theses and Dissertations - UTB/UTPA

A discrete event computer simulation is used to model a portion of the medical laboratory at Doctors Hospital at Renaissance in order to assess the current situation as well as to review the planed personnel changes. The area under observation is the section in which the processor(s) receive, label and distribute the patient samples. There are four cases modeled in the simulation: The main focus is to determine if one or two processors are needed per shift and if the high level of phone calls poses a significant delay to the processors’ workflow. The simulation results indicate that having two …

File System Simulation: Hierarchical Performance Measurement And Modeling, Hai Quang Nguyen

Graduate Theses and Dissertations

File systems are very important components in a computer system. File system simulation can help to predict the performance of new system designs. It offers the advantages of the flexibility of modeling and the cost and time savings of utilizing simulation instead of full implementation. Being able to predict end-to-end file system performance against a pre-defined workload can help system designers to make decisions that could affect their entire product line, involving several million dollars of investment. This dissertation presents detailed simulation-based performance models of the Linux ext3 file system and the PVFS parallel file system. The models are developed …

Improved Algorithms For Ear-Clipping Triangulation, Bartosz Kajak

UNLV Theses, Dissertations, Professional Papers, and Capstones

We consider the problem of improving ear-slicing algorithm for triangulating a simple polygon. We propose two variations of ear-slicing technique for generating “good-quality” triangulation. The first approach is based on searching for the best triangle along the boundary. The second approach considers polygon partitioning on a pre-process before applying the ear-slicing. Experimental investigation reveals that both approaches yield better quality triangulation than the standard ear-slicing method.

An Empirical Investigation Of Supply Chain Excellence In Healthcare, Brian Keith Smith

Graduate Theses and Dissertations

This research is motivated by opportunities to improve the cost and quality of healthcare delivery through improved supply chain processes. This research assesses the quality of the healthcare supply chain and identifies factors that are driving supply chain excellence among organizations in the healthcare industry. The first objective of this research is to assess the state of quality measurement in the healthcare supply chain. The achievement of this first objective is presented in Chapter 3 of this dissertation in the form of a manuscript accepted for publication in The Quality Management Journal. The second research objective is to develop …

Design For Soft Error Tolerance In Fpga-Implemented Asynchronous Circuits, Yu Bai

Theses and Dissertations - UTB/UTPA

This research in its present form is the result of experimentation on effect of soft error in FPGA-implemented asynchronous circuit. The conclusion are drawn that asynchronous circuit are much easier to detect soft error than synchronous circuits. The asynchronous circuit is implemented in FPGA with software fault injection method to analyze the behavior of soft error generation in FPGA implementation asynchronous circuits. The proposed detection circuit can detect all soft errors that generated in FPGA-implemented asynchronous circuit. The contributions include: investigation of FPGA structure, investigation of soft error model in FPGA, mechanism of FPGA implemented asynchronous circuit, behavior of soft …

The Design, Development, And Optimization Of Variable And Fixed Orifice Dampers With Empirical And Experimental Testing For Implementation In The Railroad Industry, Charles K. Speck

Theses and Dissertations - UTB/UTPA

The work of this thesis details the experimental testing, development, and optimization of the spools and system of the variable orifice damper system. The fixed orifice system was developed from concept, tested, and then redesigned. The experimental testing for the orifice selection directed the optimization and final design for the fixed orifice damper system. The testing focused on the evaluation of pressure drops and flow rate for static testing. The dynamic testing evaluated the displacement rate and force loading. Design, testing, and optimization worked to achieve designed flow rates and pressure drops provided by Amsted Rail based upon simulations. When …

Data Aggregation And Dissemination In Vehicular Ad-Hoc Networks, Khaled Ibrahim

Computer Science Theses & Dissertations

Vehicular Ad-Hoc Networks (VANETs) are a fast growing technology that many governments and automobile manufacturers are investing in to provide not only safer and more secure roads, but also informational and entertainment-based applications for drivers. The applications developed for VANETs can be classified into multiple categories (safety, informational, entertainment). Most VANET applications, regardless of their category, depend on having certain vehicular data(vehicular speed, X position and Y position) available. Although these applications appear to use the same vehicular data, the characteristics of this data (i.e., amount, accuracy, and update rate) will vary based on the application category. For …

Enhancing Simulation Composability And Interoperability Using Conceptual/Semantic/Ontological Models, Andreas Tolk, John A. Miller

Computational Modeling & Simulation Engineering Faculty Publications

(First paragraph) Two emerging trends in Modeling and Simulation (M&S) are beginning to dovetail in a potentially highly productive manner, namely conceptual modeling and semantic modeling. Conceptual modeling has existed for several decades, but its importance has risen to the forefront in the last decade (Taylor and Robinson, 2006; Robinson, 2007). Also, during the last decade, progress on the Semantic Web has begun to influence M&S, with the development of general modeling ontologies (Miller et al, 2004), as well as ontologies for modeling particular domains (Durak, 2006). An ontology, which is a formal specification of a conceptualization (Gruber et al, …

Sub Pixel Analysis And Processing Of Sensor Data For Mobile Target Intelligence Information And Verification, Theresa Allen Williams

Doctoral Dissertations

This dissertation introduces a novel process to study and analyze sensor data in order to obtain information pertaining to mobile targets at the sub-pixel level. The process design is modular in nature and utilizes a set of algorithmic tools for change detection, target extraction and analysis, super-pixel processing and target refinement. The scope of this investigation is confined to a staring sensor that records data of sub-pixel vehicles traveling horizontally across the ground. Statistical models of the targets and background are developed with noise and jitter effects. Threshold Change Detection, Duration Change Detection and Fast Adaptive Power Iteration (FAPI) Detection …

Surface Optimization Of High Density Polyethylene And Carbon Nanofiber Composites For The Improvement Of Electromagnetic Shielding Effectiveness, Brandon C. Jarvis

Theses and Dissertations - UTB/UTPA

Nanoreinforced composites of High Density Polyethylene (HDPE) and Carbon Nanofibers (CNF) of varying nanofiber concentration were fabricated via melt mixing. Following fabrication, various metal and metal-nitride thin films were sputter deposited upon the substrates. Volume resistivity measurements of the composite substrates, as well as four point probe analysis of the composites and the deposited films were performed and are reported. Electromagnetic Interference (EMI) Shielding Effectiveness (SE) measurements were performed upon all samples in order to gauge the effects of percolation and the presence of the deposited film(s) upon overall SE. Comparisons of experimental measurements with analytical models available in the …

Experimental Evaluation Of Select Servers And Firewalls Under Denial Of Service Security Attacks, Raja Sekhar Reddy Gade

Theses and Dissertations - UTB/UTPA

Internet security requires newer prevention mechanisms to be implemented on web-servers and routers. Firewall/Intrusion Prevention mechanisms (IPS) can be deployed on host servers or routers as an added line of defense against Internet attacks. In this thesis, we evaluate performance of security mechanisms provided by these devices against Distributed Denial of Service (DDoS) attacks. The host based firewalls on Windows servers-2003 and 2008 were evaluated. In this thesis, we also evaluated Juniper Networks Netscreen-5GT firewall/IPS, and Cisco ASA-5510/IPS that are used in protecting web-servers against DDoS attacks. It was found that the host based firewalls and protection mechanisms on the …

A Methodology For Implementing Rf Bists In Production Testing To Replace Rf Conventional Tests, Deepa Mannath

Graduate Theses and Dissertations

Production testing of Radio Frequency (RF) devices is challenging due to the complex nature of the tests that have to be performed to verify functionality. In this dissertation a methodology to replace the complex and expensive RF functional tests with defect-oriented Built-in Self Tests (BiSTs) is detailed. If a design has sufficient margin to RF specifications then RF tests can be replaced with structural tests using a new data analysis technique called quadrant analysis, which is presented. Data from the analysis of over one million production units of said System on Chip (SoC) is presented along with the results of …

Bemdec: An Adaptive And Robust Methodology For Digital Image Feature Extraction, Isaac Kueth Gang

Dissertations

The intriguing study of feature extraction, and edge detection in particular, has, as a result of the increased use of imagery, drawn even more attention not just from the field of computer science but also from a variety of scientific fields. However, various challenges surrounding the formulation of feature extraction operator, particularly of edges, which is capable of satisfying the necessary properties of low probability of error (i.e., failure of marking true edges), accuracy, and consistent response to a single edge, continue to persist. Moreover, it should be pointed out that most of the work in the area of feature …

Design And Implementation Of An Actively Adjustable Spring Mechanism Via Redundant Actuation, Eleazar Marquez

Theses and Dissertations - UTB/UTPA

This study presents the theoretical results and experimental validation of an adjustable stiffness mechanism. The use of redundant actuation is emphasized in the design of a one-degree-of-freedom Watt II mechanism capable of independently controlling the effective stiffness without a change in equilibrium position. This approach is in contrast to previous spring mechanism designs unable to actively control the spring rate independent of deflection, and has potential applications in various types of suspension and assembly systems. Results indicate that driving the redundantly actuated, unidirectional, spring mechanism requires attaching two direct brush-type direct current motors on each of the two grounded revolute …

A Study Of The Effect Of Vibration On Railroad Bearing Temperature, Bertha Alicia Gonzalez

Theses and Dissertations - UTB/UTPA

An on-track collaborative field test and laboratory experiments were conducted in order to determine the relationship between abrupt rises in surface temperature of a railroad bearing and vibration signatures captured during the experiments. The collaborative field test was conducted in order to investigate the root cause for this abrupt temperature change known as bearing temperature trending. The research presented in this thesis will show that temperature trending is correlated to an increase in the magnitude of vibration within the bearing and the fundamental frequencies that are generated by the internal components of a rotating bearing assembly. Distinct vibration mechanisms are …