Engineering Commons^™

Natural Convection Of Cuo-Water Nanofluid Flow Along A Vertical Plate With Variable Thermophysical Properties And Discrete Heat Sources, Nepal Roy, Ioan Pop, Rama Subba Reddy Gorla

Faculty Publications

Effects of discrete heat sources along a vertical plate are of practical importance due their occurrence in electronic devices. For growing demand of electronic appliances and their advancement, cooling processes of them must be improved. As usual fluids have limited heat transfer, nanofluids made by dispersing nanoparticles into them are utilized to enhance thermal performance. However, flow characteristics and heat transfer of a nanofluid for discrete heat sources along a vertical plate need to be explored. For this reason, this study analyzes the natural convective heat transfer and flow behaviors of CuO-water nanofluid induced by discrete heat sources along a …

Fabrication Of Flexible Laser-Induced Graphene-Based Non-Enzymatic Glucose Sensor For Diabetes Management, Reagan Aviha

Electrical & Computer Engineering Theses & Dissertations

This research focuses on developing a flexible non-enzymatic glucose sensor to address the issues of cost, stability, and limited sensitivity associated with enzymatic glucose sensors. Regular monitoring of glucose levels is required to manage the global health challenge of diabetes. The sensor is built on a cost-effective, durable, flexible, conductive, and high-surface-area substrate acting as a scaffold for modification with easily tunable and electroactive species to enhance glucose detection. The electroactive materials used are zinc oxide (ZnO), palladium (Pd) and platinum (Pt). Laser-induced graphene (LIG) is created by laser engraving. ZnO, Pd and Pt are electrochemically deposited and optimized based …

Extending The Job Demands-Resource Model In Classified Work Environments: A Longitudinal Analysis Of Job Demands, Resources, Job Satisfaction, And Retention Among Engineers, Gregory Gooden

Engineering Management & Systems Engineering Theses & Dissertations

The Job Demands–Resources (JD-R) model is a widely used framework for understanding how work conditions influence employee attitudes and retention-related outcomes. However, empirical evidence testing JD-R dynamics in classified technical work environments remains limited, particularly using longitudinal designs that account for structural constraints, nonrandom participation, and outcome-specific measurement challenges. Classified work is characterized by persistent demands, restricted flexibility, and security-driven limitations on available resources, raising questions about whether and how JD-R processes generalize to this context.

This study examines whether job demands and job resources predict subsequent job satisfaction and retention intent in a classified technical workforce using multi-wave longitudinal …

Observations Of An Oscillatory Mechanochemical Reaction Between Tetrathiafulvalene And Chloranilic Acid, Alastair Deans

Physics Theses & Dissertations

Mechanochemistry is the study of chemical reactions driven by the input of mechanical en ergy in addition to thermal activation. Mechanochemical reactions from powders are carried out by manual grinding or milling using various types of ball mills, or in twin extruders. While mechanochemistry has great potential affording economically and environmentally advantageous “green” synthetic methods, a drawback is that its chemical mechanisms are not well understood. One example of such a reaction currently under study involves tetrathiafulvalene, an organic elec tron donor with two polymorphs (orange and brown), and chloranilic acid, an electron acceptor. Previous results show that neat grinding …

Mechanisms Of Synergy Between Nanosecond Pulsed Electric Field (Nspef) And Cold Atmospheric Pressure Plasma Discharge (Cap) In Pancreatic Cancer: The Role Of Ros-Mediated Oxidative Stress And Apoptosis, Zobia Minhas

Theses and Dissertations in Biomedical Sciences

Pancreatic ductal adenocarcinoma is a highly lethal malignancy characterized by poor prognosis and resistance to conventional therapies. Novel treatment strategies are needed to overcome this resistance. Non-thermal physical modalities, including nanosecond pulsed electric field (nsPEF) and cold atmospheric pressure plasma discharge (CAP), have emerged as potential anticancer approaches; however, the mechanisms underlying their combined effects remain unclear.

This study evaluated whether nsPEF enhances CAP-induced cytotoxicity and investigated the associated molecular mechanisms using the murine Pan02 pancreatic cancer cell line. Cell viability was assessed by WST-1 metabolic activity assays and electric cell–substrate impedance sensing (ECIS). Intracellular reactive oxygen species (ROS) were …

Cavitation-Aware Design Of Hydrofoil Sections For Marine Propeller Blade Development, Samuel G. Bacon

Mechanical & Aerospace Engineering Theses & Dissertations

Cavitation is a major design constraint for marine propeller blade sections because it can reduce hydrodynamic performance, increase vibration and noise, and contribute to surface damage. This thesis develops and applies an exploratory computational framework for cavitation-aware hydrofoil-section design relevant to marine propeller blade development. The framework combines section-level CFD validation, CST-based geometry parameterization, pressure-based pre-screening, matched-load comparison, and focused predicted inception envelope or cavitation-bucket analysis.

The CFD methodology was validated against published YS-920 hydrofoil water-tunnel data using selected fully wetted, near-inception, and cavitating reference cases. The validation results showed that the adopted framework reproduced the key experimental trends needed …

Optimization Of Niobium Film For Particle Accelerators And Quantum Applications, Bektur Abdisatarov

Electrical & Computer Engineering Theses & Dissertations

Niobium (Nb) films play a central role in superconducting technologies used in particle accelerators and superconducting quantum circuits. Optimizing the physical properties of Nb films is therefore critical for improving both radiofrequency (RF) performance in superconducting radiofrequency (SRF) cavities and coherence in superconducting qubits. This thesis investigates the relationship between Nb film microstructure, impurity content, and electromagnetic response across these two application domains.

For particle accelerator applications, we studied Nb films deposited using high-power impulse magnetron sputtering (HiPIMS) with DC bias onto a 1.3 GHz elliptical SRF cavity. Nb film cavities exhibit a pronounced medium-field Q-slope, limiting their achievable accelerating …

Bioengineering The Future Of The Human Species: H+’S Ideological Iterations Of Trans-/Posthumanity As Exemplified By Futurist Literary Texts = (Bio)Technological Solutions For (And/Or) Reification Of Systemic Inequities?, Marjorie E. Bomhower

English Theses & Dissertations

While humanity has, throughout our species’ history, endeavored to dream and create astonishing, and ever-evolving, (bio)technologies with the utopian ideals of bettering our day-to day lives and achieving greater longevity, our endeavors have (thus far) not only produced remarkable, beneficial advances in longevity and quality of life, but have also yielded devastating and dire outcomes; often at the cost and victimization of marginalized communities. This dissertation focuses on select (bio)technologies – particularly, those promoted by H+ (the most current and popular technoutopianist non-profit, “educational,” organization) – with an investigation of current and nascent (bio)technological evolutions, futurist literary texts, and critical/digital …

High-Fidelity Swarthmore Septa Station Display, Aurélien Carretta , ‘26, Nicholas Fettig , ‘26

Senior Theses, Projects, and Awards

For this project, we propose a design and a prototype assembly for a high-fidelity SEPTA station display that shows real-time transit information, including train delays and future arrival times. This system would allow local commuters and Swarthmore College affiliates alike to remain updated on train arrival times at the Swarthmore College station, which currently does not have such a display deployed. We accomplished this design goal by assembling 16 LED panels together, powering them through a power supply unit, and sending information to them from a Raspberry Pi 5 microcontroller which connected to the SEPTA API to pull real-time information. …

Bleachers Constructed From Reclaimed Structural Lumber, Ben Aaron , ‘26, Amelia Landry , ‘26, Zoe Sperduto , ‘26

Senior Theses, Projects, and Awards

This project designs bleachers from reclaimed structural lumber for the new Fieldhouse at Swarthmore College. Wood is a sustainable and renewable building material, and diverting wood from the waste stream for high-value applications offers an opportunity to promote a circular economy. Wood reuse is not a common practice in the United States, and this project aims to serve as a case study of how it can be performed on small, local scales. First, deconstructed lumber is obtained from a local residential demolition site and processed. Then, destructive material testing is performed to determine the residual material properties, strength and stiffness, …

Optimization Of Pumping Kite Wind Energy Conversion System, Jamie Pickar , ‘26, Sam Peterson , ‘26, Luke Magnuson , ‘26

Senior Theses, Projects, and Awards

Airborne wind energy systems (AWES) promise access to higher-altitude wind resources at lower capital cost than conventional turbines. This thesis presents a rigid-wing, ground-generation AWES prototype developed across two coupled subsystems: a kite designed for harnessing wind energy and a generator station designed for efficient pumping-cycle operation.

The kite subsystem progressed through three design generations. We replaced ball-joint wing mounts with fixed joints, derived a tail design using tail volume coefficients, and validated the tail through fusion 360 stress testing and Unity game engine simulation. The final prototype of the kite demonstrated approximately 25 seconds of passive transient flight stability …

Materials Testing Furnace 2026, Austin Gregson, Lucas Lafayette, Mekhi Hale

Mechanical Engineering Senior Theses

This thesis presents the design, analysis, manufacturing, and testing of a material testing furnace for its intended use at Santa Clara University. The goal of this project is to develop a cost-effective and adaptable furnace capable of providing a controlled hightemperature, inert environment for material characterization. The furnace incorporates welded aluminum chambers, stainless steel load-transfer rams, an argon-based atmospheric control system, and planned tungsten heating elements for reaching temperatures up to 2000 ◦C. Trade-off analyses were conducted on the ram cooling channel geometry as well as the choice of coolant through both plates and rams. Manufacturing efforts were focused on …

Bio-Payload Senior Design Report, Connor Bishop, Oliver Goodall, Marcus Kirk, Gabby Robles, Anish Shanmuganathan

Interdisciplinary Design Senior Theses

This project focuses on the design and development of an autonomous experimental platform capable of conducting cellular biology experiments in a well plate within a CubeSat environment. The system integrates microfluidics, robotics, and onboard sensors to remotely initiate experiments, monitor them, and collect data without human intervention. The objective is to create a platform for automated biological experimentation in microgravity, while reducing reliance on ground-based control and increasing mission efficiency and reproducibility. The team used Saccharomyces cerevisiae to assess the biocompatibility of the well plate and monitor changes in cell culture, including optical density and cell viability.

Pool Pump Controls For Load Shifting, Andrew Minocha, Angelo Piziali, Cade Benner, Brinley Chrzanowski

Mechanical Engineering Senior Theses

Residential swimming pool pumps represent the second largest source of energy consumption in California homes, and with approximately 1.3 million pools operating across the state, they collectively represent a significant opportunity for grid-level load flexibility. This project presents the design, construction, and commissioning of a proof-of-concept laboratory test rig developed to validate a load-shifting algorithm on a commercially available variable-speed pool pump. The system retrofits a donated Pentair Intelliflo3 VSF pump with an external Raspberry Pi 4 controller that commands pump speed through relay-based digital inputs and logs hydraulic and electrical performance data in real time. A simulated pool filtration …

Performance Reviews In Project-Based Engineering Firms: Toward A More Holistic And Development-Oriented Approach, Xun He

Harrisburg University Dissertations and Theses

Performance reviews are widely used in engineering consulting firms to evaluate employee contributions and determine compensation and promotion decisions. However, research has shown that traditional review systems may overemphasize measurable technical results while overlooking collaboration, leadership, and innovation. In project-based engineering environments, where employees work across multiple teams and stakeholders, this structure may not fully reflect the nature of daily work. This qualitative phenomenological study explored how early-career engineers in project-based engineering consulting firms experienced performance review practices. Data were collected through semi-structured interviews with 15 engineers working in consulting firms. The study examined participants’ perceptions of fairness, completeness, and …

Radiation Protection Factor Research: The Keystone For Conventional-Nuclear Integration (Cni), Andrew W. Decker

Faculty Publications

This article briefly describes Defense Threat Reduction Agency (DTRA) vehicle Radiation Protection Factor (RPF) research and explains its critical role in enabling future Operations in a Nuclear Environment (ONE) and Conventional-Nuclear Integration (CNI) on behalf of the US Department of War (DoW).1 As such, the background and practical utility of RPF values is discussed, as well as the justification for renewed Army and DoW investment into RPF research to enhance Joint military planning, survivability, and lethality on tomorrow’s nuclear battlefields. Advances in DTRA RPF research directly strengthen US strategic and extended deterrence efforts and support all Agencies and Departments responsible …

Enhancing Co2 Adsorption And Co2/N2 Separation Performance By Incorporating Calcium In Mil-53 (Al), Hussein Rasool Abid, Hussein Znad, Nabil Majd Alawi, Farhan Lafta Rashid, Anmar Dulaimi, Amer Alanazi, Alireza Keshavarz, Stefan Iglauer, Shaobin Wang

Research outputs 2022 to 2026

Global warming is primarily driven by the rapid accumulation of carbon dioxide (CO₂) in the atmosphere. Metal–organic frameworks (MOFs) have emerged as promising materials for mitigating CO₂ emissions due to their tunable porosity, large surface area, and structural flexibility. Among them, MIL-53(Al) has attracted widespread interest owing to its excellent thermal and chemical stability. Recent studies show that modifying MOFs with secondary metals can significantly enhance their CO₂ adsorption performance. In this work, a one-pot synthesis method was employed to incorporate calcium (Ca), functioning as a Lewis basic metal, into the MIL-53(Al) framework to produce a series of bimetallic materials: …

Zwitterionic And Anionic Ultrafiltration Membrane Modification For Efficient, Fouling-Resistant Microalgae Harvesting, Victor Okorie Mkpuma, Mohadeseh Najafi, Javad Farahbakhsh, Masoumeh Zargar, Navid Reza Moheimani, Houda Ennaceri

Research outputs 2022 to 2026

Membrane surface modification is a promising strategy for fouling mitigation in membrane-based microalgae filtration, primarily by limiting the interactions between the membrane surface and the foulant particles. This study investigated the effectiveness of modified membranes in filtering Chlorella sp. MUR 269. First, three polyethersulfone membranes with varying pore sizes were evaluated to determine the influence of pore size on filtration performance and fouling behavior. The ultrafiltration membrane that exhibited the best performance was subsequently modified using two functional monomers: the zwitterionic [2-(methacryloyloxy)ethyl]dimethyl (3-sulfopropyl) ammonium hydroxide and the negatively charged mono-2-(methacryloyloxy)ethyl succinate (MMS). The filtration performance and fouling resistance of the …

Engineering Zinc Anodes Through Advanced Manufacturing Strategies For Next-Generation Zinc–Air Batteries, Yasir Arafat, Kareem Bakhsh, Muhammad Rizwan Azhar

Research outputs 2022 to 2026

Rechargeable zinc–air batteries (ZABs) are promising next-generation energy storage systems due to their high energy density, intrinsic safety, and low cost. Nevertheless, commercial deployment of Zn anodes is hampered by persistent challenges like dendrite formation, deformation, passivation, corrosion, and the hydrogen evolution reaction. This review systematically highlights the critical relationship between anode morphology and electrochemical performance and discusses recent advances in advanced manufacturing strategies for Zn anodes. Additive manufacturing approaches, such as 3D printing, enable the fabrication of porous and tunable Zn electrodes with enhanced surface area and uniform ion flux distribution. Furthermore, advanced materials processing techniques like alloying, coatings, …

Liquid Membranes For The Selective Extraction Of Lithium Ions From Brine: A Review, Maryam Gonbadi, Shayan Abrishami, Yasaman Boroumand, Ana Vafadar, Magdalena Wajrak, Amir Razmjou

Research outputs 2022 to 2026

The surging global demand for lithium, driven by its essential role in batteries for electric vehicles, portable electronics, and energy storage systems, underscores the need for efficient and sustainable extraction technologies. This review provides a comprehensive analysis of liquid-based membrane technologies (bulk liquid membranes (BLMs), supported liquid membranes (SLMs), and polymer inclusion membranes (PIMs)) for selective lithium extraction from brine sources. These membranes employ carrier molecules such as crown ethers, organophosphorus compounds, and ionic liquids to achieve high selectivity over competing ions through facilitated transport mechanisms. BLMs, primarily used in laboratory settings, utilize various configurations enabling selective complexation and diffusion …

Development, Performance Analysis And Application Of Polymer Inclusion Membranes: A Critical Review, Shayan Abrishami, Mahsa Golmohammadi, Matthew Myers, Masoumeh Zargar, Antonia Pérez De Los Ríos, Francisco José Hernández-Fernández, Amir Razmjou

Research outputs 2022 to 2026

Polymer Inclusion Membranes (PIMs) have emerged as sustainable separation platforms that integrate carrier-mediated selectivity within stable polymeric matrices, eliminating drawbacks of conventional solvent extraction such as solvent loss and emulsion formation. This review examines the fundamental principles, recent developments, and performance characteristics of PIMs, emphasizing design, fabrication, and operational optimization. The three essential components, base polymers, plasticizers, and carriers are systematically analysed alongside their synergistic effects on membrane stability, selectivity, and transport efficiency. Emerging materials including ionic liquids and deep eutectic solvents as dual-function plasticizers/carriers receive particular attention. Preparation methods are critically evaluated, including solution casting, phase inversion, and thermal …

Assessment Of Thickness-Dependent Recombination Mechanisms And Realistic Performance Limits In Csbi₃I₁₀ Lead-Free Perovskite Solar Cells, Samiul Sadek, Ayan Saha, Jegadesan Subbiah, Mohammad Tariqul Islam, Mohammad Junaebur Rashid, Mohammad Aminul Islam, Gufran Umar Alam Shaikh, Wan Zulhafizhazuan Bin Wan Jusoh, Mohammad Nur-E-Alam, Puvaneswaran Chelvanathan, Mohd Adib Ibrahim

Research outputs 2022 to 2026

Lead-free perovskite solar cells (PSCs) offer a promising, environmentally sustainable alternative to their lead-based counterparts, yet their performance is often constrained by charge transport and recombination limitations. This study presents a comprehensive numerical investigation into the thickness-dependent performance of lead-free bismuth-based PSCs employing CsBi₃I₁₀ as the absorber layer. Through systematic variation of the absorber, electron transport layer (ETL), and hole transport layer (HTL) thicknesses within a planar FTO/TiO₂/CsBi₃I₁₀/Spiro-OMeTAD/Ag architecture modeled using SCAPS-1D, an optimal absorber thickness range of 0.5–1.0 µm is identified. Under idealized conditions, a peak power conversion efficiency (PCE) of 21.62% is predicted, primarily to illustrate thickness-dependent trends. …

Plant-Mediated Green Synthesis Of Zinc Ferrite Nanoparticles: Mechanisms, Properties, And Advanced Applications In Environmental And Biomedical Fields, Rihab Jabbar

Al-Bahir

Recently, plant-mediated green synthesis has emerged as a sustainable, eco-friendly, and cost-effective strategy for synthesizing zinc ferrite (ZnFe₂O₄) nanoparticles (NPs). This review critically examines the advancements in biosynthesizing ZnFe₂O₄ NPs using various plant extracts, including Aloe vera, Hibiscus rosa-sinensis, Aegle marmelos, Eucalyptus leaves, Tragacanth gum, Piper nigrum, and Moringa oleifera, among others. It emphasizes their dual role as reducing, capping, chelating, and stabilizing agents. The article extensively compares physicochemical properties of the green-synthesized NPs in terms of crystallite size, morphology, magnetic behavior, and band gap energy. Achieved through different synthesis routes such as sol-gel, hydrothermal, co-precipitation, and microwave-assisted methods. …

Condition Monitoring Of Induction Motor Using Motor Current Signature Analysis, Francis Ikechukwu Obianke, Joseph Okhaifoh, Benjamin Akinloye

Al-Bahir

Induction machines serve as the cornerstone and driving force of modern manufacturing and production systems. This research aims to monitor and analyse the operating performance of induction motors using motor current signature analysis (MCSA). MCSA is employed to process the current signal of a motor into a frequency spectrum, known as the current signature by applying the Fast Fourier Transform (FFT) algorithm. The underlying principle is that vibration generated in a motor is closely related to the changes of the magnetic field density, and the induced voltage varies with the stator current.

A simulation model replicating the behaviour of an …

Recombinant Gelonin: Purification And Functional Validation For Electroporation-Assisted Delivery, Eleni Zivla, Giedrė Šilkūnienė, Andrei G. Pakhomov, Mantas Šilkūnas, Olga N. Pakhomova

Knowledge and Creativity Expo

Type I ribosome-inactivating proteins, such as gelonin, are enzymatically potent toxins but are effectively non-toxic under physiological conditions because they are unable to cross the plasma membrane[1]. Pulsed electric fields (PEF) overcome this delivery barrier by transiently permeabilizing the plasma membrane, allowing direct cytosolic entry. This enhances gelonin cytotoxicity by several thousand-fold, highlighting gelonin’s potential as an electrochemotherapy candidate[2]. Here, we present a recombinant gelonin (rGel) expression platform in E. coli with HPLC-based purification that enables reproducible protein production and structure-guided engineering.

The mature gelonin sequence (residues 47–297) was cloned into pET-32a(+) with an N-terminally fused Trx-6×His tag and TEV …

On The Extreme Complexity Of Certain Nearly Regular Graphs, Gregory P. Constantine, Gregory C. Magda

Theory & Applications of Graphs

The complexity of a graph is the number of its labeled spanning trees. It is demonstrated that the seven known triangle-free strongly regular graphs are graphs of maximal complexity among all graphs of the same order and degree; their complements are shown to be of minimal complexity. A generalization to nearly regular graphs with two distinct eigenvalues of the Laplacian is presented. Conjectures and applications of these results to biological problems on neuronal activity are described.

Requirements Of The Elderly In Interior Design Based On A Survey As A First Stage Of Smart Interior Design, Girges Sidhom, Christine Ezzat Danial

HBRC Journal

As the number of the aged in the world is expected to rise dramatically, the built environment should be adjusted to accommodate aging in place, and most of the facilities currently available are inadequate in terms of interior design requirements to support the functional and psychological needs of the aged. The purpose of this study is to establish the design needs of the aged by incorporating smart technology in interior architecture to make them safer and self-reliant. The methodology will apply a descriptive methodology by use of literature review and an analytical approach by use of a questionnaire of 153 …

Design And Construction Of Prestressed Concrete Balanced Cantilever Bridges, Ahmed S. Elareshy, Ashraf M. Osman, Ismail. M. Kamal, Amr A. Abdelrahman

HBRC Journal

Balanced cantilever concrete bridges have recently been widely used in mid and long-span bridges. This paper presents a comprehensive review of the development and design of prestressed concrete balanced cantilever (PCBC) bridges, focusing on research related to real case studies of both precast and cast-in-place box-girder bridges investigated through finite element modeling (FEM) or field measurements. The research strategy targeted peer-reviewed journal articles, conference papers, and technical reports published over the last two decades in major engineering databases. Construction methods, design methodology, and structural behavior of this type of bridge are discussed, alongside key findings on long-term response, dynamic performance, …

Efficiency Comparison Of Reduced Graphene Oxide (Rgo) Composite-Incorporated Polyacrylonitrile Nanofibrous Filters For Respirable Crystalline Silica Dust And Coal Dust, Mahsa Moradi, Ashish Kakoria, Lina Zheng, Guang Xu

Mining Engineering Faculty Research & Creative Works

The health of miners working in underground mines is greatly threatened by their exposure to respirable crystalline silica (RCS) found in coal dust. While coal dust includes RCS, it is important to know the specific filtration efficiency for RCS particles compared to coal dust to improve protective measures. This study compares the filtration efficiency of reduced graphene oxide (rGO) composite-incorporated Polyacrylonitrile (PAN) nanofibrous filters at four different concentrations of rGO (0, 2, 6, and 10 wt.%) for RCS particles and coal dust. The filters were made using the electrospinning method. They were tested separately with RCS particles and coal dust …

The George-Anne Daily, Georgia Southern University

George-Anne Media Group: Newsletters & Magazines

No abstract provided.