Engineering Commons^™

Analytical-Critical Review Of Widely Used Industrial Devices For Drying Mineral Fertilizers, Djalolitdin Paxritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

The article is devoted to the review of the modern state of research in the mineral fertilizers drying field, critical analysis and comparison of widely used drying apparatuses. There are procedures of preliminary equipment selection for soluble fertilizers industrial drying on the basis of such criteria as productivity, efficiency, energy saving, environmental impact degree, indicating the possible advantages and disadvantages of different application variants.

Calculation Of Hydraulic Resistance Of A Tubular-Gridse Nozzle With Spiral Turbulizers, Nurmukhamedov Habibulla Sagdullaevich, Mavlonov Elbek Tulkinovich, S.Kh. Nishonova, Kh.S. Nurmukhamedov

Chemical Technology, Control and Management

The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of smooth pipes and pipes with turbulators. Spiral turbulators are placed discretely with a step t/d=0,3125-0,9375 and installed on a tube sheet in a checkerboard pattern with a step s/d=1,15-10. Experimental studies were carried out with air flow in the transition region.

It has been established that with increasing numerical values of the dimensionless parameter s/d, the resistance of the pipe package decreases from 1,3 to 1,8 …

Development Of A Mathematical Model Of Magnetic Field Distribution In Magnetic Conductors Of A Wide-Range Current Transformer, Abdurauf Safarov

Chemical Technology, Control and Management

The article is devoted to the analysis of the distribution of the magnetic field in the magnetic conductors of a wide-range current transformer for the development of a mathematical model that can be used as the basis for calculating its static characteristics and error. The design, replacement circuits and design model of a current transformer are given. The relations of magnetic induction and tension from the coordinate of the position of the primary winding are obtained. It is shown that the conversion range can be adjusted depending on the different positions of the bus with current, as a result of …

Synthesize A Neural Network Parameter Optimizer For An Adaptive Pid Controller, Nashvandova Gulruxsor Murot Qizi

Chemical Technology, Control and Management

Wide application of proportional-integral-differential (PID)-regulator in industry requires constant improvement of methods of its parameters superstructuring. In the paper, the questions of optimization of PID-regulator parameters with application of methods of neural network technology are considered. A methodology for selecting the architecture of neural network optimizer designed to determine the tuned parameters of PID regulator is proposed. The algorithm of training of the neural network, with the set on the basis of the method of inverse gradient propagation is offered. The proposed improved PID-neural regulator allowed to provide stabilization of neural network operation and its trainability in the control loop …

Development Of A Criterion Assessing The Level Of Relationship Of Multiple Identified Characteristics For Classification, Mirzoyan Mirzaaxmedovich Kamilov, Oybek Zokirovich Koraboshev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article discusses an optimized version of the standard design developed by Yu.I.Zhuravlev, an optimization procedure through an algebraic approach based on precedent algorithms that solves the problem of pattern identification. The formation of the convex hull of the recognition operator and corrective procedures of information models by mutual compensation of each other was also studied. In addition, the functional connection of recognition operators and the definition of idempotent connection of operators are analyzed.

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang

Journal of Electrochemistry

In recent years, joint time-frequency analysis has once again become a research hotspot. Supercapacitors have high power density and long service life, however, in order to balance between power density and energy density, two key factors need to be considered: (i) the specific surface area of the porous matrix; (ii) the electrolyte accessibility to the intra-pore space of porous carbon matrix. Electrochemical impedance spectra are extensively used to investigate charge penetration ratio and charge storage mechanism in the porous electrode for capacitance energy storage. Furthermore, similar results could be obtained by different methods such as stable-state analysis in the frequency …

Automated Workflow For Redox Potentials And Acidity Constants Calculations From Machine Learning Molecular Dynamics, Feng Wang, Jun Cheng

Journal of Electrochemistry

Redox potentials and acidity constants are key properties for evaluating the performance of energy materials. To achieve computational design of new generation of energy materials with higher performances, computing redox potentials and acidity constants with computational chemistry have attracted lots of attention. However, many works are done by using implicit solvation models, which is difficult to be applied to complex solvation environments due to hard parameterization. Recently, ab initio molecular dynamics (AIMD) has been applied to investigate real electrolytes with complex solvation. Furthermore, AIMD based free energy calculation methods have been established to calculate these physical chemical properties accurately. However, …

Confirmation Of Anomalous-Heat Report, Steven B. Krivit, Melvin H. Miles

Journal of Electrochemistry

This study identifies, for the first time, critical calculation errors made by Nathan Lewis and his co-authors, in their study presented on May 1, 1989, at the American Physical Society meeting in Baltimore, Maryland. Lewis et al. analysed calorimetrically measured heat results in nine experiments reported by Martin Fleischmann and his co-authors. According to the Lewis et al. analysis, each of the experiments, where calculated for no recombination, showed anomalous power losses. When we used the same raw data, our corrected calculations indicate that each experiment showed anomalous power gains. As such, these data suggest the possibility of a new, …

In Situ Chlorine Generation And Rare Earth Chlorination By Molten Salt Electrolysis, Mark Schvaneveldt, Tyler Williams, Ranon Fuller, Devin Rappleye

Faculty Publications

Chloride volatility processes for purifying actinide and rare earth elements have historically required the use of Cl₂ tanks. To minimize the hazards associated with these processes, an apparatus was designed to produce Cl₂ via molten salt electrolysis. Within this apparatus, one can generate Cl₂, chlorinate metals, and consume excess Cl₂. Here, electrode materials were tested for their ability to generate Cl₂, the composition of the gaseous electrolysis product was evaluated using a quadrupole mass spectrometer, and a Ce foil sample was successfully chlorinated using the electrochemically generated Cl₂.

Ai For Dummies, Jacob Mazurkiewicz

D.U.Quark

No abstract provided.

Applicability Of Using Bio-Receptive Concrete For Building Facades In Egypt, Gina Roupheil

Theses and Dissertations

The significant increase in carbon dioxide emissions caused by the construction industry is detrimental to our planet. This is rapidly increasing with the urbanization of cities that is gradually taking its toll on the available green spaces, which help in balancing such emissions. Recently, researchers have been trying to make use of bio-receptivity to create biomaterial systems that could be spread on building envelopes and support the growth of small plant species and microorganisms to establish on. Out of those materials, comes the concrete as a promising material for bio-colonization.

Within this context, this study aims at investigating the applicability …

Influence Of Alkali Metal Cations On The Oxygen Reduction Activity Of Pt5Y And Pt5Gd Alloys, Kun-Ting Song, Alexandra Zagalskaya, Christian M. Schott, Peter M. Schneider, Batyr Garlyyev, Vitaly Alexandrov, Aliaksandr S. Bandarenka

Department of Chemical and Biomolecular Engineering: Faculty Publications

Electrolyte species can significantly influence the electrocatalytic performance. In this work, we investigate the impact of alkali metal cations on the oxygen reduction reaction (ORR) on active Pt₅Gd and Pt₅Y polycrystalline electrodes. Due to the strain effects, Pt alloys exhibit a higher kinetic current density of ORR than pure Pt electrodes in acidic media. In alkaline solutions, the kinetic current density of ORR for Pt alloys decreases linearly with the decreasing hydration energy in the order of Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺, whereas Pt shows the opposite trend. To gain …

Thermal Insulation And Fire Protection Plaster For Frp System Incorporating Aerogel Nanoparticles And Phyllosilicates, Athnasious Ghaly

Theses and Dissertations

For more than two decades, new innovative materials have been introduced to the market such as nano materials that can be utilized for their high performance in different aspects of the construction industry. Structural repair and strengthening is one of the most demanding fields in the construction industry for innovative and high-performance materials due to its specialty. Time, quality, economy, and sustainability are the main factors that control this field, and for that, new systems keep being introduced to the market to reduce the time of repair and enhance its efficiency. Fiber Reinforced Polymers (FRP) Systems are the most advanced …

Consumers' Acceptance To Buy And Dispose Of Recycling Textile Products, Roa Alsayed

Theses and Dissertations

The textile industry is the second most polluting worldwide, following food manufacturing. It is one of the industries that is rarely scrutinized in the Middle East and North Africa (MENA) region. This work analyzes the fashion industry from the perspective of consumer attitudes towards the purchase and disposal of clothing, and their behavior with regards to old garments. The study was conducted in Saudi Arabia and Egypt, two countries that achieved similar results in the fashion industry. The methodology is divided into three phases. First, the manuscript begins with a review of topics such as sustainability, consumer behavior in the …

Properties Of Portland Cement Concrete Incorporating Basalt-Based Pozzolanic Cement, Rana Khalil

Theses and Dissertations

Over the last decade, the world's population has increased dramatically. Due to this growth, the demand for concrete and Portland cement, in return, have increased. Manufacturing of Portland cement is an energy-intensive process that, alone, contributes to about 8% of global CO2. For decades, efforts have been exerted to reduce the harmful environmental impacts of Portland cement by reducing its use in concrete as well as considering alternate binders that may fully or partially replace it. This study aims to assess the properties of concrete incorporating a novel basalt-based pozzolanic cement. To meet this objective, four sets of concrete mixtures …

Prediction Of Distresses In Pavement Networks: A Machine Learning Approach, Mahmoud Kotb

Theses and Dissertations

The quality of pavement networks is greatly affected by different distresses. These distresses appear in many forms, such as cracking, potholes, rutting and different types of deformation. As a result, to ensure effective pavement management, accurate modeling of these different distresses has become essential. Moreover, machine learning models have shown great potential in modeling pavement performance in recent years. The objective of this research is to develop machine learning models for modeling key parameters of pavement distress, specifically the International Roughness Index (IRI), fatigue and longitudinal cracking. Data for this investigation were extracted from the Long-Term Pavement Performance (LTPP) database, …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

The Behavior Of ½⟨111⟩ Screw Dislocations In W–Mo Alloys Analyzed Through Atomistic Simulations, Lucas A. Heaton, Kevin Chu, Adib J. Samin

Faculty Publications

Analyzing plastic flow in refractory alloys is relevant to many different commercial and technological applications. In this study, screw dislocation statics and dynamics were studied for various compositions of the body-centered cubic binary alloy tungsten–molybdenum (W–Mo). The core structure did not appear to change for different alloy compositions, consistent with the literature. The pure tungsten and pure molybdenum samples had the lowest plastic flow, while the highest dislocation velocities were observed for equiatomic, W_0.5Mo_0.5 alloys. In general, dislocation velocities were found to largely align with a well-established dislocation mobility phenomenological model supporting two discrete dislocation mobility regimes, …

Text Summarization, Varun Gottam, Anusha Vunnam, Purna Sarovar Puvvada

Symposium of Student Scholars

The current era is known as the information era. Every day, millions of gigabytes of data are being transferred from one point to another. As the creation of data became easy, it became hard to keep track of the important points and the gist of data especially in areas such as research and news. To solve this conundrum, text summarization is introduced. This is a process of summarizing text from across different documents or large datasets such that it can be read and understood easily by both humans and machines.

Yieldnet: Intelligent Fruit Yield Estimation For Selected Orchards Using Deep Learning Based Semantic Segmentation, Maheswari P

Theses and Dissertations

Agriculture contributes more resources for developing sustainable economic growth of the nation. Precision agriculture employs advanced techniques (machine learning and deep learning) for developing the intelligent systems of various agricultural applications. Among various agricultural tasks, yield estimation of crops plays a vital role in decision-making such as harvesting, marketing, cultivation practices, etc. Traditionally yield estimation is performed manually which has major drawbacks i.e., needs experts opinion, time-consuming and it is a challenging task for big orchards. To overcome these issues, an intelligent yield estimation model using neural network-based systems is required.

Some of the literature works have been explored for …

Investigation Of Fault Detection And Redundant Control Strategy For Model Predictive Control Of Distillation Column, Rajalakshmi R

Theses and Dissertations

Model Predictive Controller (MPC) is one of the industrial-ready control systems and an ideal choice for complex, slow-varying, and energy-intense Distillation Columns (DC). However, MPCs are subjected to failures and their performance degrades with faults and disturbances. Hence, there is a need for a redundant control strategy to ensure the continuous operation of MPC-controlled DC, which is investigated in this work.

A pilot-plant binary DC used to separate methanol and water is implemented with a computer-controlled system and is subjected to Pseudorandom Binary Excitation Signals (PRBS). The output response acquired is used to develop a MIMO (Multi-Input Multi- Output) state-space …

Research And Optimization Of Yolo-Based Method For Automatic Pavement Defect Detection, Hui Yao, Yaning Fan, Xinyue Wei, Yanhao Liu, Dandan Cao, Zhanping You

Michigan Tech Publications

According to the latest statistics at the end of 2022, the total length of highways in China has reached 5.3548 million kilometers, with a maintenance mileage of 5.3503 million kilometers, accounting for 99.9% of the total maintenance coverage. Relying on inefficient manual pavement detection methods is difficult to meet the needs of large-scale detection. To tackle this issue, experiments were conducted to explore deep learning-based intelligent identification models, leveraging pavement distress data as the fundamental basis. The dataset encompasses pavement micro-cracks, which hold particular significance for the purpose of pavement preventive maintenance. The two-stage model Faster R-CNN achieved a mean …

Dynamics Of Nanocluster Aerosol In The Indoor Atmosphere During Gas Cooking, Satya S. Patra, Jinglin Jiang, Xiaosu Ding, Chunxu Huang, Emily K. Reidy, Vinay Kumar, Paige Price, Connor Keech, Gerhard Steiner, Philip Stevens, Nusrat Jung, Brandon E. Boor

Purdue University Libraries Open Access Publishing Fund

Nanocluster aerosol (NCA: particles in the size range of 1–3 nm) are a critically important, yet understudied, class of atmospheric aerosol particles. NCA efficiently deposit in the human respiratory system and can translocate to vital organs. Due to their high surface area-to-mass ratios, NCA are associated with a heightened propensity for bioactivity and toxicity. Despite the human health relevance of NCA, little is known regarding the prevalence of NCA in indoor environments where people spend the majority of their time. In this study, we quantify the formation and transformation of indoor atmospheric NCA down to 1 nm via high-resolution online …

Classification Of Human Learning Stages Via Kernel Distribution Embeddings, Madeleine Shuhn-Tsuan Yuh, Kendric Ray Ortiz, Kylie Sue Sommer-Kohrt, Meeko Oishi, Neera Jain

School of Mechanical Engineering Faculty Publications

Adaptive automation, automation which is responsive to the human's performance via the alteration of control laws or level of assistance, is an important tool for training humans to attain new skills when operating dynamical systems. When coupled with cognitive feedback, adaptive automation has the potential to further facilitate human training, but requires precise assessments of human progression through various learning stages. This is challenging because of the underlying dynamics, as well as the stochasticity inherent to human action. We propose a data-driven approach to assess learning stages in a complex quadrotor landing task that is responsive to stochastic, human-in-the-loop quadrotor …

Granular Estimation Of User Cognitive Workload Using Multi-Modal Physiological Sensors, Jingkun Wang, Christopher Stevens, Winston Bennett, Denny Yu

Purdue University Libraries Open Access Publishing Fund

Mental workload (MWL) is a crucial area of study due to its significant influence on task performance and potential for significant operator error. However, measuring MWL presents challenges, as it is a multi-dimensional construct. Previous research on MWL models has focused on differentiating between two to three levels. Nonetheless, tasks can vary widely in their complexity, and little is known about how subtle variations in task difficulty influence workload indicators. To address this, we conducted an experiment inducing MWL in up to 5 levels, hypothesizing that our multi-modal metrics would be able to distinguish between each MWL stage. We measured …

Formulation And Aerosol Jet Printing Of Nickel Nanoparticle Ink For High-Temperature Microelectronic Applications And Patterned Graphene Growth, Nicholas Mckibben, Michael Curtis, Olivia Maryon, Mone’T Sawyer, Maryna Lazouskaya, Josh Eixenberger, Zhangxian Deng, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

Aerosol jet printing (AJP) is an advanced manufacturing technique for directly writing nanoparticle inks onto target substrates. It is an emerging reliable, efficient, and environmentally friendly fabrication route for thin film electronics and advanced semiconductor packaging. This fabrication technique is highly regarded for its rapid prototyping, the flexibility of design, and fine feature resolution. Nickel is an attractive high-temperature packaging material due to its electrical conductivity, magnetism, and corrosion resistance. In this work, we synthesized nickel nanoparticles and formulated an AJP ink, which was printed on various material surfaces. Thermal sintering experiments were performed on the samples to explore the …

Path-Bigbird: An Ai-Driven Transformer Approach To Classification Of Cancer Pathology Reports, Mayanka Chandrashekar, Isaac Lyngaas, Heidi A. Hanson, Shang Gao, Xiao Cheng Wu, John Gounley

School of Public Health Faculty Publications

PURPOSE: Surgical pathology reports are critical for cancer diagnosis and management. To accurately extract information about tumor characteristics from pathology reports in near real time, we explore the impact of using domain-specific transformer models that understand cancer pathology reports. METHODS: We built a pathology transformer model, Path-BigBird, by using 2.7 million pathology reports from six SEER cancer registries. We then compare different variations of Path-BigBird with two less computationally intensive methods: Hierarchical Self-Attention Network (HiSAN) classification model and an off-the-shelf clinical transformer model (Clinical BigBird). We use five pathology information extraction tasks for evaluation: site, subsite, laterality, histology, and behavior. …

A Study On High-Frequency Bending Fatigue, Microhardness, Tensile Strength, And Microstructure Of Parts Made Using Atomic Diffusion Additive Manufacturing (Adam) And Additive Friction Stir Deposition (Afsd), Hamed Ghadimi

LSU Doctoral Dissertations

This dissertation reports the findings of several studies on the mechanical and microstructural properties of parts made using atomic diffusion additive manufacturing (ADAM) and additive friction stir deposition (AFSD). The design of a small-sized bending-fatigue test specimen for an ultrasonic fatigue testing system is reported in Chapter 1. The design was optimized based on the finite element analysis and analytical solution. The stress–life (S–N) curve is obtained for Inconel alloy 718. Chapter 2 presents the findings of ultrasonic bending-fatigue and tensile tests carried out on the ADAM test specimens. The S-N curves were created in the very high-cycle fatigue regime. …

Evaluation Of Fendiline Treatment In Vp40 System With Nucleation-Elongation Process: A Computational Model Of Ebola Virus Matrix Protein Assembly, Xiao Liu, Monica Husby, Robert V. Stahelin, Elsje Pienaar

Purdue University Libraries Open Access Publishing Fund

Ebola virus (EBOV) infection is threatening human health, especially in Central and West Africa. Limited clinical trials and the requirement of biosafety level-4 laboratories hinder experimental work to advance our understanding of EBOV and the evaluation of treatment. In this work, we use a computational model to study the assembly and budding process of EBOV and evaluate the effect of fendiline on these processes in the context of fluctuating host membrane lipid levels. Our results demonstrate for the first time that the assembly of VP40 filaments may follow the nucleation-elongation theory, as this mechanism is critical to maintaining a pool …

Developing And Forecasting The Egyptian Construction Cost Index, Mayada Elsaied

Theses and Dissertations

Accurate cost estimation is pivotal for the success of construction projects, yet the industry grapples with challenges related to cost overruns. Uncertainties and unforeseen variables often introduce discrepancies, particularly during the planning phase. Economic changes, considered uncontrollable risks, significantly influence these fluctuations. Various research endeavors have quantified the impact of economic conditions on construction costs, emphasizing the correlation between economic indicators and project expenses. Addressing these challenges, the Construction Cost Index (CCI), a tool introduced by Engineering News Record (ENR), accurately delineates the correlation between economic changes and construction costs. Despite its global efficacy, an Egyptian Construction Cost Index is …