Engineering Commons^™

The Viability Of Styrofoam Beads In Concrete Mixtures, Colin Edward Sykes

Construction Management

This experiment revolved around the idea that an aggregate replacement in a concrete mixture could not only maintain its structural integrity but increase its sustainability as well. This idea was formulated into the experiment of embedding Styrofoam beads into concrete. The outcome of this experiment showed the compressive strength of the concrete increased the greatest with the substitution of Styrofoam beads for fine aggregate up to 20%. This 20% Styrofoam replacement mixture exhibited an 189% increase in compressive strength when compared to the control group in the third week of testing. In addition to this impressive compressive strength, the weight …

The Use Of Augmented Reality (Ar) Technology In Construction, Luke Zamlich

Construction Management

Building Information Modeling (BIM) has revolutionized construction by replacing traditional paper-based methods with advanced software, improving data management and project workflows. However, as projects become more complex, challenges like communication gaps and design errors persist, often leading to cost overruns. Augmented Reality (AR) is an emerging technology that could address some of these issues by enhancing real-time visualization and collaboration, helping avoid costly rework. Despite its potential, AR remains underutilized in the construction industry. This paper explores the feasibility of integrating AR into modern construction workflows to complement BIM models and improve on-site project management. A literature review highlights AR’s …

Building Safely: How Spanish Specific Safety Can Impact Job Sites, Luis D. Aguilar Montano

Construction Management

This project explores how Spanish Specific Safety Training is being approached in the construction industry, with an attempt to identify some possible issues associated with language barriers and accessibility to these trainings. This research involved data collection through thirty analytical surveys, in addition to conducting three semi-structured interviews with construction workers and supervisors. The focus of the data collection was to gain insights into several key areas, including training accessibility, workplace injuries, language barriers, and worker comfort. The survey results indicated strong support for Spanish-language safety training, with respondents recognizing its potential to improve safety and overall worker comfort. Many …

Caed Shop Entrance Wall Redesign, Theodore Haoran Khuong, Joelle Schalesky, Ellen Elizabeth Untalan, Katherine Evalyn Timbes

Construction Management

This paper details the preconstruction process involving the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. Accomplished by an interdisciplinary team of Architectural Engineering and Construction Management students, this project explores the requirements and procedures of generating a project proposal to submit to Cal Poly Facilities Management. The project, initiated in the fall of 2024, aimed to redesign the wall aligned with the adjacent Engineering West building and replace it with a CMU low lift grouted wall. The CAED Support Shop is offered as a resource to all CAED students …

A Comparison Of Mass Timber Perceptions Among Construction Professionals Over Time, Josh A. Higginson

Construction Management

Mass timber is a relatively new construction building material consisting of large-scale engineered wood products such as cross-laminated timber (CLT) and glue-laminated timber (glulam). It is gaining attention as a sustainable alternative to traditional steel and concrete, offering benefits such as reduced carbon emissions and enhanced aesthetic appeal. Despite being used on notable projects recently, it is not yet widely accepted by the industry as a whole. This study investigates the evolving awareness, benefits, and challenges associated with mass timber construction among U.S. construction professionals. Through a survey of over 100 construction practitioners, primarily from Cal Poly’s Construction Management Advisory …

Lab Exercise For Cm 114: Static Bending Of Timber And Its Alternatives, Samuel E. Arreola

Construction Management

This lab exercise investigates the static bending behavior of various structural materials. In this lab, the primary objective is to evaluate and compare the stress, strain, and deflection of 2” x 10” lumber, TJI joists, LVL beams, and steel studs under controlled loading conditions. This lab will require the calculation of cross-sectional properties, applying incremental loads until failure, and recording all corresponding deflection values. Material failure was visually documented using photographs to understand structural performance under the load. By using structural engineering principles and the formulas for stress and strain, the completion of this lab exercise provides a comprehensive analysis …

Biaxial Strain Tuned Upconversion Photoluminescence Of Monolayer Ws2, Shrawan Roy, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Monolayer tungsten disulfide (1L-WS₂) is a direct bandgap atomic-layered semiconductor material with strain tunable optical and optoelectronic properties among the monolayer transition metal dichalcogenides (1L-TMDs). Here, we demonstrate biaxial strain tuned up conversion photoluminescence (UPL) from exfoliated 1L-WS₂ flakes transferred on a flexible polycarbonate cruciform substrate. When the biaxial strain applied to 1L-WS₂ increases from 0 to 0.51%, it is observed that the UPL peak position is redshifted by up to 60 nm% strain, while the UPL intensity exhibits exponential growth with the up-conversion energy difference varying from − 303 to − 120 meV. The measured …

Reference Dependence In Queue Design And Pricing Strategies, Jian Liu, Yongpin Zhou, Jian Chen, Peng Li

Electrical and Computer Engineering Faculty Research & Creative Works

This research investigates the effect of reference dependence on waiting times in service systems which formerly used a first-in-first-out (FIFO) service but have introduced a priority line with a fee. Our model combines reference-dependent gain-loss utility with standard customer utility, and we posit that customers are pleased with shorter-than-expected waiting times, whereas longer-than-expected times lead to dissatisfaction and an increased likelihood of balking. The study explores two scenarios: a captive customer system (CCS) and a noncaptive customer system (NCCS), with a focus on optimal pricing and segmentation strategies for revenue and social welfare maximization. The results reveal that, in a …

Impact Of Electrical Testing Strategies On The Performance Metrics Of Bio-Organic-Based Resistive Switching Memory, Muhammad Awais, Hao Zhe Leong, Nadras Othman, Mohamad Danial Shafiq, Feng Zhao, Kuan Yew Cheong

Electrical and Computer Engineering Faculty Research & Creative Works

Resistive Random-Access Memory (ReRAM) is considered as one of the most promising non-volatile memory technologies because of its high scalability, fast switching speed, and low power consumption. While many review papers are focused on investigating material types, material properties, device fabrication methods, and device structures, the influence of electrical testing strategies on ReRAM performance has yet been reviewed, particularly for bio-organic-based ReRAM. This review compiled, analyzed, and discussed how compliance current, voltage sweep rate, voltage sweep range, and voltage sweeping direction affect the ON/OFF ratio, read memory window, and both SET and RESET voltages of ReRAM.

Sensitive Grip Mounting Surfaces For Physical Human-Robot Interaction., Branden Shay

Electronic Theses and Dissertations

As the development of robotics becomes ever increasingly present in our society, the need for studying how humans and robots interact with each other becomes more of a necessity to be properly integrated in the changing world around us. In this thesis, we undertake the study and development of how to create a tactile human-robot operator interface to guide a robot perform a physical task. The implementation of tactile interfaces such as SkinCell sensor arrays emulating skin, and of a robotic handlebar fitted with tactile sensors are critical examples of the challenges that come with mounting and packaging such sensors …

Investigating The Contribution Of First-Order Streams To Floods In Downstream Water Bodies On The Central Appalachian Plateau., Luke Ott

Electronic Theses and Dissertations

Flash floods are the costliest natural disaster in Appalachia. The goal of this study is to better understand flood response in headwater streams and the role of these systems in the generation of downstream floods. We applied a process-based hydrologic model using data from the Robinson Forest environmental monitoring network to estimate the contribution of headwaters to downstream floods. We then used the model to understand the effects of landscape disturbance in headwaters on downstream floods. Finally, we developed empirical hydrologic models to identify useful data for predicting downstream peak flood discharge. Results indicate that headwaters in our study catchment …

Cutting Mechanisms And Control Systems Required For Precision Cutting With An Autonomous Lettuce Harvester, Aidan V. Fischer

Master's Theses

43% of California’s vast land is consumed for agricultural production to feed the United States and other nations Lettuce production alone brought in over $3 billion in 2022 in California. Most of the lettuce today is still harvested by hand using large groups of seasonal laborers; however, this has become increasingly difficult with an immigrant labor shortage. The objective of this study was to design a low-cost autonomous lettuce harvester prototype and evaluate the performance of the harvester capable of harvesting romaine lettuce preciously on a raised bed.

The harvester is equipped with an electrohydraulic control system that is used …

Factors Influencing Faculty's Adoption Of Engineering Technology: A Qualitative Study, Michelle Jarvie-Eggart, Shari L. Stockero, Alfred Owusu-Ansah

Michigan Tech Publications

With technologies changing faster than ever before, engineering faculty must continuously update the technologies they use and teach to students to meet accreditation requirements and keep up with industry standards. Many do not, however. Additionally, existing models of technology adoption do not account for all variability within intention to use a technology, nor its actual use. Informed by the Unified Theory of Acceptance and Use of Technology (UTAUT), this study examined which constructs from prior models apply to engineering faculty's adoption of industry-specific technologies, as well as other factors influencing faculty adoption of these technologies for their teaching or research. …

Populations Digitally Excluded From Education: Issues, Factors, Contributions And Actions For Policy, Practice And Research In A Post-Pandemic Era, Don Passey, Jean Gabin Ntebutse, Manal Yazbak Abu Ahmad, Janet Cochrane, Simon Collin, Asmaa Ganayem, Elizabeth Langran, Sadaqat Mulla, Ma. Mercedes T. Rodrigo, Toshinori Saito, Miri Shonfeld, Saunand Somasi

Department of Information Systems & Computer Science Faculty Publications

This conceptual paper draws on a wide range of research and policy literature, providing a contemporary view of issues, factors and practices that affect education for digitally excluded populations. Concern for how education for digitally excluded populations can be supported is focal to this paper, with different sections offering key related perspectives. From an analysis of issues, factors and practices, actions for policy, practice and research are identified. Given a key finding that power issues can have major effects on plans, implementation processes and outcomes when addressing needs of education for digitally excluded populations, the paper concludes by offering frameworks …

Fabrication And Performance Of Scalable Bio-Engineered Porous Layers For Efficient Co2 Capture, Mary Sharon Rose Bondugula

Theses and Dissertations

This dissertation addresses the critical challenge of mitigating climate change by advancing CO2 capture technologies. As global CO2 emissions continue to rise, effective methods for capturing and separating CO2 from industrial processes are essential to combat climate change. Existing CO2 capture systems, such as Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA), often rely on packed bed designs that face limitations, including poor heat and mass transfer, slow gas diffusion, and low thermal conductivity, reducing their efficiency. To overcome these challenges, this dissertation explores innovative solutions by developing advanced adsorbent coatings and scalable bed configurations.

This research begins by …

Heterogeneous Collaborative Robotics: Multi-Robot Navigation In Dynamic Environments, Tyler Nicholas Raettig

Theses and Dissertations

Abstract: The challenges of multi-robot navigation in dynamic environments, focusing on uncertainties in obstacle complexities, partial observation, and the transition of policies from simulations to the real world. The proposed approach utilizes a deep reinforcement learning (DRL) framework enabling a Light Detection and Ranging (LiDAR)-equipped robot to communicate with a camera-equipped robot to achieve optimal paths despite their different sensors. The key contributions include the development of a cooperative architecture for information exchange between robots, a DRL-based framework for learning navigation policies, and a training mechanism based on dynamic randomization for enhanced real-world adaptability. Experimental validation using Gazebo simulations demonstrates …

Primary And Secondary Resonances Of Fringe Effect Electrostatically Actuated Mems Cantilever Resonators, Miguel Armando Martinez

Theses and Dissertations

The nonlinear dynamics of micro-electromechanical system (MEMS) cantilever resonators actuated by the fringe field at parametric and primary resonances are studied. Three models are used based on different descriptions of the system capacitance. In the fringe and capacitance models, the electrostatic force due to the parallel-plate capacitance is neglected due to a hole in the ground plate (removes overlapping area). The SolidWorks model is based on numerical capacitance simulations performed on SolidWorks using EMS. All three models that approximate the fringe field capacitance are compared with one another. The Method of Multiple Scales (MMS) and Reduced Order Model (ROM) up …

Study Of Temperature Effects Of Glucose And Microwave Dielectric Dispersion Model, Ethan Grant Boone

Theses and Dissertations

In this study, the temperature effect of dielectric properties in various aqueous solutions containing glucose are examined. A design for a new testing chamber is introduced to provide improved conditions for testing to ensure accurate and precise measurements. A N-SMA Adaptor is used when obtaining dielectric characteristics of glucose solutions ranging 100-300mg/dl. Dielectric parameters are obtained adopting a modified Debye dispersion model. MATLAB is used to confirm coaxial dimensions are suitable fabrication designs using fixed dielectric parameters of air and water. Simulations and design models were implemented utilizing ANSYS High Frequency Structure Simulator and 3-D Modeler software to develop the …

3d Bioprinted Coaxial Tubule Optimization For Human Aortic Endothelial Cell Growth, Ilse Gabriela Perez Garcia

Theses and Dissertations

This paper introduces a research study of printing parameter optimization of extruded, cell-laden, 3D bioprinted coaxial tubules, as well as cell interaction observations. Optimization of printing parameters seeks to reduce variability of the tubules’ inner and outer diameters. The tubules were manufactured from a 0.4% Collagen I - 1.6% NaC6H7O6 (Sodium Alginate) bioink, that reaches gelation through interaction with a 3.2% CaCl2 (Calcium Chloride) solution. The bioinks were extruded through a dual syringe pump mechanism connected to a coaxial nozzle, which is mounted on an adapted 3D FDM (Fused Deposition …

Resonances Of Electrostatically Actuated Non-Uniform Mems Cantilever Resonator Of Constant Width And Linearly Varying Thickness, Rigoberto Flores

Theses and Dissertations

In this investigation the behavior of an electrostatically actuated non-uniform microelectromechanical (MEMS) cantilever resonator of constant width and linearly varying thickness is investigated. The cantilever resonator vibrates using soft AC voltage at near half the first natural frequency of the cantilever and near the first natural frequency of the cantilever, known as primary and parametric resonances, respectively. Bifurcation diagrams for the amplitude-frequency and amplitude-voltage response are obtained for both resonances. Two methods are used in this investigation, namely the Method of Multiple Scales (MMS) and Reduced Order Model (ROM) using up to 6 modes of vibration.

These methods are used …

Identifying Challenges Faced By Small And Medium Enterprises (Smes) In The Middle East And North Africa (Mena) Region Through Total Quality Management, Mohamad Atef

Theses and Dissertations

Recently, Small and Medium Enterprises (SMEs) have become recognized as an important driver of global economic growth and innovation. This phenomenon is particularly evident in the MENA region, where small and medium-sized enterprises (SMEs) make a significant contribution to the businesses. SMEs offer significant benefits in terms of job creation, revenue generation, and fostering economic diversity. Although SMEs have a vital contribution in the economy of the MENA region, SMEs face many challenges that hinder their development and long-term viability. Focusing on these challenges is very important for fostering a vibrant and resilient economic environment. The objective of this thesis …

Physicochemical Property Effects On Immune Modulating Polymeric Nanoparticles: Potential Applications In Spinal Cord Injury, Daniel J. Kolpek, Jaechang Kim, Hisham Mohammed, John C. Gensel, Jonghyuck Park

Markey Cancer Center Faculty Publications

Nanoparticles (NPs) offer promising potential as therapeutic agents for inflammation-related diseases, owing to their capabilities in drug delivery and immune modulation. In preclinical studies focusing on spinal cord injury (SCI), polymeric NPs have demonstrated the ability to reprogram innate immune cells. This reprogramming results in redirecting immune cells away from the injury site, downregulating pro-inflammatory signaling, and promoting a regenerative environment post-injury. However, to fully understand the mechanisms driving these effects and maximize therapeutic efficacy, it is crucial to assess NP interactions with innate immune cells. This review examines how the physicochemical properties of polymeric NPs influence their modulation of …

Engineering Faculty Perceptions On Student-Use Of Generative Artificial Intelligence (Gai) In Course Completion, Michaela Harper

All Graduate Theses and Dissertations, Fall 2023 to Present

Computer science and engineering faculty often argue whether students should be allowed to use GAI tools, such as ChatGPT, or banned from using them for fear of decreasing learning and workforce quality. This research gathers and reports engineering and computer science faculty members’ perceptions, opinions, and recommendations for GAI use in higher education. Faculty members agree that these technologies are here to stay and must be understood to address GAI in college and university courses. However, their willingness to implement GAI into their courses varied based on prior experience in industry and with the technology itself. Those with very limited …

Assessing Khumbu Region Glaciers Mass Balance Change Using Geospatial Techniques From 2012 To 2024, Yashvi Jagatbhai Shah

Electronic Theses, Projects, and Dissertations

The glaciers in the Hindu Kush Himalaya are critical for sustaining the water supply of South Asia's major rivers, upon which over 230 million people, both in the mountainous regions and lowland areas, depend. Climate change is driving rapid glaciers melt near the summit of Mount Everest, located at an elevation of approximately 7,906 meters (25,938 feet). This has resulted in glacier thinning occurring up to 80 times faster than the original ice formation. However, due to their disposition in a complex topographic setting and inaccessible terrain, continuous glacier observations pose significant challenges.

This study evaluated the mass balance of …

An Analysis Of Security Risks Posed By Text-Based Generative Ai And Corporate Security Weaknesses Leading To Data Leaks, Tashya Rakshana Byreddy

Electronic Theses, Projects, and Dissertations

ABSTRACT

Generative AI (GenAI) has become a fundamental part of modern life, influencing how we work, learn, and interact with technology. This project focuses specifically on text-based GenAI, which is widely used for tasks such as information gathering, code improvement, and content creation. Despite its benefits, it presents significant security risks that are often underestimated by users. This project investigates these risks and the corporate security gaps that lead to unintentional data leaks. The project also provides a brief overview of Large Language Models (LLMs), which are based on the deep learning technique known as Transformer architecture, used for performing …

Autism Spectrum Disorder, Vidhya Lakshmi Jeevarathinam

Electronic Theses, Projects, and Dissertations

Autism Spectrum Disorder (ASD) diagnosis requires an integrative approach that combines behavioral, biomedical, and computational methodologies for enhanced accuracy. This study introduces a comprehensive framework that employs machine learning (ML) and deep learning (DL) techniques alongside linear regression to model relationships between behavioral traits, biomedical markers, and ASD likelihood. Behavioral inputs, such as social interaction patterns, repetitive behaviors, and communication characteristics, are analyzed using linear regression to identify significant predictors of ASD. Simultaneously, a Convolutional Neural Network (CNN) is trained on image datasets to detect visual cues, such as facial expressions, associated with ASD. Advanced techniques, including transfer learning and …

Neodymium Doped Zinc Oxide Based Advanced Flexible Piezoelectric Energy Harvester And Self-Powered Biomotion Sensor, Muhtasim Ul Karim Sadaf, Abu Musa Abdullah, Haimanti Majumder, Sk Shamim Hasan Abir, Mariana Torres, Karen Lozano, Md. Wasikur Rahman, M. Jasim Uddin

Mechanical Engineering Faculty Publications

Flexible piezoelectric devices have garnered a lot of attention for their potential as energy harvesters and transducers. In this work, Neodymium (Nd) doped Zinc Oxide (ZnO) based flexible piezoelectric energy harvester and sensory device has been developed. Nd-doped ZnO has been synthesized using wet chemical co-precipitation and incorporated in Polyvinylidene Difluoride (PVDF) polymer matrix along with Multiwalled Carbon Nanotubes (MWCNT) to produce flexible piezoelectric films. The piezoelectric output of the device is tested at variable tapping frequency (60 to 240 BPM) and pressure (10 to 40 psi). The device has also been tested with conventional electronics like bridge rectifiers, capacitors, …

Prediction Of Dislocation Density During Casting Of 316 Stainless Steel Based Alloys As A Function Of Chromium And Nickel Composition, Abhishek Chitradurga Ranganath

All Theses

By the 1990s, computational methods were beginning to be used to study dislocation density in mental casting. Prior to that time research was based heavily on laboratory studies. This move was encouraged by the need to overcome limitations that experimental approaches had, including high costs and time-consuming processes, and needs of researchers to understand atomic-scale phenomena. Computational techniques allow complex materials to be simulated in cost effective way and can provide insight into behaviour that could never be determined through experimental methods alone.

This work utilized molecular dynamics (MD) simulations along with machine learning approaches to examine the dislocation density …

Hardware Applications Of High-Speed Fault Detection Algorithms, Daniel Zintsmaster

All Theses

The growing need for a sustainable electric energy infrastructure has driven research into control, protection, and optimization of power systems. A key challenge is that the changing grid must operate at increasingly higher speeds, but many current hardware devices cannot meet these demands. This thesis focuses on power system protection, aiming to design a hardware solution that can detect and isolate faults in microseconds, ensuring faster, more reliable grid operations. The first hardware developed was for a low-voltage direct current (LVdc) microgrid, which faces challenges due to a lack of protection schemes and novel speed requirements. This thesis presents protection …

Comparative Analysis Of Design-Build And Design-Bid-Build Project Delivery Methods Through Cost, Schedule And Quality Performance For Warehousing And Storage Facilities, Vijaya Ravi Prasanth Reddi

All Theses

Storage facilities are essential for e-commerce operations, providing inventory, distribution, and delivery space. As per the Bureau of Labor Statistics, the number of warehousing and storage businesses in the United States increased from 15,152 in 2010 to 21,287 in 2024, showing continuous growth over the decade. Given the recent surge, there is a need to understand the performance of these facilities better. This study aims to contrast the measure of quantitative performance of design-build (DB) versus traditional design-bid-build (DBB) project delivery methods (PDM) based on cost, schedule, and quality metrics for storage facilities. This research conducted a literature review to …