Engineering Commons^™

Performance Assessment Of Microencapsulated Phase Change Materials With Low To High Thermoregulation Range In Asphalt Binder, Anil Kumar Baditha, Ayyaz Fareed

Graduate Student and Postdoctoral Fellow Symposium

Asphalt pavements face significant challenges due to low temperature cracking and rutting caused by extreme temperature fluctuations and traffic loading. These issues result in higher maintenance costs and reduced service life of the pavements. To address this, researchers explored the use of Microencapsulated Phase Change Materials (MPCMs) to induce thermoregulation in asphalt pavements. However, the existing research focused on high-temperature performance of binders, highlighting the need of research on evaluating the low-temperature performance. Therefore, the study aims to evaluate the impact of incorporating MPCMs on low to high temperature performance of binders. Three types of MPCMs were incorporated into asphalt …

Circular Economy Eu Networks Inventory, Mark Kelly, James O’Donnell, Derek Sinnott, Azedine Derardja, Sadaf Dalirazar, Ioannis Markou

Tools

Circular Economy EU Networks Inventory is a review of complementary EU research projects in the area of Circular Economy

Development Of 3d Printed Anatomically Equivalent Thermoplastic Polyurethane Conduits For Peripheral Nerve Regeneration, Allen Zennifer M

Theses and Dissertations

Three-dimensional (3D) printing is an emerging tool for creating patient-specific tissue constructs analogous to the native tissue microarchitecture. In this study, anatomically equivalent 3D nerve conduits were developed using thermoplastic polyurethane (TPU) by combining reverse engineering and material extrusion (i.e., fused deposition modelling) technique.

Printing parameters were optimized to fabricate nerve-equivalent TPU constructs. The TPU constructs printed with different infill densities supported the adhesion, proliferation, and gene expression of neuronal cells. Subcutaneous implantation of the TPU constructs for three months in rats showed neovascularization with negligible local tissue inflammatory reactions and was classified as a non-irritant biomaterial as per ISO …

Modeling Studies Of An Intensified Reforming/Fischer-Tropsch Synthesis Process For Gas To Liquid Conversion, Brian Gray

USF Tampa Graduate Theses and Dissertations

Despite rigorous study and advancement in fields of green energy, the world's transportation industry remains poised to continue reliance on liquid hydrocarbon fuels. To date, the primary source of diesel and jet fuels is the petroleum industry; however, continuing trends in rising greenhouse gas emissions present a need for study into processes for the production of synthetic hydrocarbon fuels. The most promising technologies to meet this goal are gas-to-liquid (GtL), biomass-to-liquid (BtL) and coal-to-liquid (CtL). The commonality of these technologies is that they utilize a feedstock to produce carbon monoxide and hydrogen gas (syngas) which becomes the building blocks of …

Routing Problems Through The Lens Of Hybrid Algorithms, Sasan Mahmoudinazlou

USF Tampa Graduate Theses and Dissertations

This dissertation explores novel approaches to address complex combinatorial optimization challenges in transportation and routing scenarios. Three sets of contributions are presented, each encapsulated in a chapter. The first set of contributions introduces a pioneering hybrid genetic algorithm meticulously crafted to address the intricacies of the Traveling Salesman Problem with Drone (TSPD) and the Flying Sidekick Traveling Salesman Problem (FSTSP). These emerging problems involve the strategic use of both ground-based trucks and aerial drones for efficient package delivery. Our algorithm stands out by leveraging sophisticated chromosomes and dynamic programming, allowing for broad exploration by the genetic algorithm and effective exploitation …

Characterization Of Oscillatory Response Of Light-Weight Wind Turbine Rotors Under Controlled Gust Pulses, Fernando Ponta, Alayna Farrell, Apurva Baruah, North Yates

Michigan Tech Publications

Given the industry-wide trend of continual increases in the size of utility-scale wind turbines, a point will come where reductions will need to be made in terms of the weight of the turbine’s blades to ensure they can be as long as needed without sacrificing structural stability. One such technique that may be considered is to decrease the material used for the shell and spar cap. While this will solve the weight issue, it creates a new one entirely—less material for the shell and spar cap will in turn create blades that are more flexible than what is currently used. …

Underwater Double Vortex Generation Using 3d Printed Acoustic Lens And Field Multiplexing, Chadi Ellouzi, Ali Zabihi, Farhood Aghdasi, Aidan Kayes, Milton Rivera, Jiaxin Zhong, Amir Miri, Chen Shen

Henry M. Rowan College of Engineering Departmental Research

The generation of acoustic vortex beams has attracted an increasing amount of research attention in recent years, offering a range of functions, including acoustic communication, particle manipulation, and biomedical ultrasound. However, incorporating more vortices and broadening the capacity of these beams and associated devices in three dimensions pose challenges. Traditional methods often necessitate complex transducer arrays and are constrained by conditions such as system complexity and the medium in which they operate. In this paper, a 3D printed acoustic lens capable of generating a double vortex pattern with an optional focusing profile in water was demonstrated. The performance of the …

Experimental Study On Acoustic Emission Evolution Characteristics And Response Mechanism Of Damaged Rocks, Zhang Kai, Zhang Dongxiao, Zhao Yongqiang, Yang Yingming, Guo Weiyao, Sun Peng, Xu Linpeng, Fu Guangsheng

Coal Geology & Exploration

The evolution of rock internal damage is one of the causes of geotechnical engineering disasters, and revealing the response characteristics of key parameters during the rock failure could provide a basis for the identification instability state after rock failure, which is of great importance for the early warning and prevention of rock engineering disasters. Herein, the siltstone specimens with different damage degrees were prepared by cyclic loading-unloading tests, and uniaxial loading tests were carried out with the damaged specimens. On this basis, the relationship between the damage degree of specimen and the wave velocity, as well as the acoustic emission …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Favorable Factors In Methane Production From Residual Coal Post-Biohydrogen Generation, Xia Daping, Liao Jiajia, Chen Zhenhong, Chen Xi, Guo Hongyu, Huang Dan

Coal Geology & Exploration

Determining favorable factors in methane production from residual coal post-biohydrogen production holds great theoretical and practical significance for improving the efficiency of methane production in the second stage of coal-based poly-generation. This study focuses on residual coal after hydrogen generation through anaerobic fermentation. Using coal samples from the Baiyinhua open-pit mine in Inner Mongolia as fermentation substrates, this study explored the dynamic trends of both the methane production and structure of the residual coal under different conditions by altering the aeration conditions and hydraulic retention time (HRT). Key findings are as follows: (1) Among the experiment groups with different atmosphere …

Numerical Simulation On Influence Of Skin Effect On Groundwater Flow Velocity In Wellbore, Wang Qihang, Li Xu, Guo Qiang, Kuai Dawei

Coal Geology & Exploration

Groundwater flow velocity in wellbore is usually measured by single-well tracking tests or Aqua Vision flow velocity and direction meters to calculate the groundwater flow velocity in the aquifer. Due to the impact of the skin structure, the groundwater flow field near the wellbore changes, causing a difference between the flow velocity in the wellbore and that in the aquifer. In order to investigate the influence of the skin effect on the groundwater flow velocity in the wellbore, a numerical model of groundwater flow that considers the skin effect was established using the COMSOL Multiphysics software. On this basis, the …

Exploring Geological Parameters Sensitive To Underground Coal Gasification, Zhou Ze, Yi Tongsheng, Qin Yong, Zhou Yongfeng, Wang Lingxia, Kong Weimin

Coal Geology & Exploration

Compared to ground coal chemical plants, underground coal gasification (UCG) requires gasifiers as geological bodies. Accurately understanding geological conditions is a critical prerequisite for UCG. To minimize the geological risks involved in UCG siting, this study systematically explored the geological parameters sensitive to UCG based on the intricate geological conditions of Guizhou Province, China. By collecting and organizing the exploration data of coal resources in Guizhou, this study established mathematical models for normalized, graded parameter value assignment, the algorithm of parameter weight vectors, and the algorithm of parameter weight product, with the purpose of obtaining the accurate quantitative data of …

Uranium And Thorium Enrichment Characteristics Of Bauxite In Coal Measure Strata And Their Natural Gamma-Ray Responses, Zhang Xiaohui, Zhang Shangqing, Liu Dongna, Zhao Fenghua, Zhao Jun, Zhong Zhuanghua, Hou Xuqin

Coal Geology & Exploration

Shanxi Province boasts abundant bauxite resources occurring in coal measure strata, with the deep bauxite resources in this province subjected to progressive assessment. This study aims to further determine the endowment of aluminum resources within coals in the province and explore efficient exploration methods. To this end, this study investigated the bauxite layers in Upper Carboniferous coal measure strata in the Xiaoyi area, Shanxi Province. It examined 37 samples from three boreholes using methods such as optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence spectrometry (XRF), and inductively coupled plasma mass spectrometry (ICP-MS). Based on the analysis …

Law Governing Variations In Water-Pressure Transmission Rate In Confined Aquifers, Wang Wenxue, Wang Bosen, Gao Yanwei, Wu Bing, Nie Tianyu

Coal Geology & Exploration

The water pressure in aquifers is transmitted as energy, with a transmission rate much higher than the migration rate of water particles. The water-pressure transmission rate holds great significance for the safe construction and disaster forecast and prediction of underground engineering under high-pressure water aquifers and bodies. Focusing on the confined aquifers bearing no cohesive soil, this study explored the law governing the changes in the water-pressure transmission rate through theoretical analysis, numerical simulations, field experiments, and laboratory physical model tests. Key findings are as follows: (1) The transmission of water-pressure changes in the aquifers exhibited noticeable hysteresis. The transmission …

Coal-Rock Interface Imaging Based On Acoustic Remote Reflection Logging Within Crossing Boreholes Using The Finite Element Method, Xu Hongyang, Zhai Cheng, Xia Jigen, Sun Yong, Dong Xingmeng, Lai Yongshuai, Yu Xu, Xu Jizhao, Cong Yuzhou

Coal Geology & Exploration

The presence of small geological structures is the main cause of coal and gas outbursts, making the precise detection of these structures an urgent need. High-precision detection of coal-rock interfaces is essential for identifying small structures and achieving transparent mining faces. The acoustic remote reflection logging technology, with a large detection range, a high resolution, and imaging capability, can accurately identify coal-rock interfaces. In this context, this study proposed a technique for coal-rock interface detection based on acoustic remote reflection logging within crossing boreholes. Specially, by placing acoustic detectors in crossing boreholes, the array waveforms generated by the coal-rock interfaces …

Mitigation Of Potential Risks In Chemical Laboratories: A Focused Review, Hossein Abedsoltan, Mark B. Shiflett

Chemical and Biochemical Engineering Faculty Research & Creative Works

This review paper presents an analysis of safety practices in chemical laboratories. It encompasses a systematic exploration of various facets including risk assessment, hazard mitigation, and the implementation of safety protocols. Emphasis is placed on the critical role of continuous education and training, advocating a proactive safety culture, and adapting to technological advancements. Additionally, the paper underscores the importance of adhering to regulatory standards, promoting exceeding baseline compliance toward establishing best practices in laboratory safety. This comprehensive approach highlights the dynamic, multifaceted nature of laboratory safety, positioning it as a fundamental aspect of scientific research.

Application Of The Horizontal Seismic Profiling-Based Advance Detection Technology To The Excavation Of Rock Roadways In Coal Mines Using Tunnel Boring Machines, Zhang Sheng, Chen Zhao, Lu Song, Yang Zhanbiao, Ji Panjun, He Fei, Lu Yiqiang, Liu Jiawei

Coal Geology & Exploration

With the gradual application of full-face tunnel boring machines (TBMs) to the excavation of rock roadways in coal mines, there is an increasingly urgent need for the accurate and rapid advance prediction of unfavorable geological structures. This study analyzed the characteristics of active-source seismic wave-based advance detection methods and the applicability of the advance detection technology based on TBM seismic while drilling (TSWD) with TBM rock-breaking vibration as a seismic source. Then, by combining the geological and production conditions of coal mine roadways, this study proposed a horizontal seismic profiling (HSP)-based advance detection method applicable to the excavation of roadways …

Early Warning And Prediction Of Kicks And Lost Circulation Accident During Rescue Drilling Of Mine, Chen Weiming, Wang Jiawen, Fan Dong, Hao Shijun, Zhao Jiangpeng, Qiu Yu

Coal Geology & Exploration

In order to solve the problems such as the difficulty in early warning and prediction of kicks and lost circulation accidents during emergency rescue drilling of mine, a machine learning-based early for warning and prediction model of drilling process was established. Firstly, the accident characterization parameters of the drilling parameters in the early stage of kicks and lost circulation accidents were analyzed. Secondly, the accident characterization parameters were cleaned and processed. On this basis, XGBoost and early warning model was used to carry out the early diagnosis and identification of kicks and lost circulation accidents. Then, the PSO-LSTM accident development …

Analysis On Working Characteristics Of Cam-Roller Impact Mechanism Of Rotary Percussion Drilling Tool, Sun Yangqing, Yi Xianzhong, Wan Jifang, Ma Jianqi, Wu Jiwei, Yi Jun, Yin Guangpin

Coal Geology & Exploration

Rotary percussion drilling tools can effectively improve their rock breaking efficiency in the deep and hard strata, thus having broad application prospects. The cam-roller is the key mechanism to realize the impact action, but the complex and changeable downhole environment leads to serious damage to the mechanism, which in turn affects the efficiency of rock breaking. Based on the test drilling data of rotary impact drilling tools in several wells, the cam-roller dynamics model was established, the working characteristics under different strokes, speeds and drilling pressures were analyzed by Autodyn (explicit dynamics), and the deformation characteristics of the mechanism were …

Development And Application Of An Automatic Online Testing Instrument For The Funnel Viscosity And Density Of Drilling Fluids, Xie Hui, Zheng Liqun, Liu Fulin, Liang Mengjia, Liu Xuan, Cai Jihua, Yang Xianyu, Hou Jiwu

Coal Geology & Exploration

In recent years, the research on the automatic performance testing technology for drilling fluids has achieved significant progress both domestically and internationally. However, automatic drilling fluid testing instruments face challenges, such as high costs, complicated structures, and restricted working environments. Given these challenges, this study developed an automatic online testing instrument for the funnel viscosity and density of drilling fluids. The testing instrument consists of mud pumping, testing, cleaning, and control modules, which are built using a programmable logic controller (PLC), an Internet of things (IoT) module, a pressure sensor, an ultrasonic sensor, a peristaltic mud pump, an electric ball …

Deformation And Collapse Patterns Of Gas Drainage Boreholes And A Precise Monitoring Technology, Xiao Peng, Huang Xiaosheng, Liu Xiaoxiao, Li Bingkun, Chen Liping, Chen Zixi, Zhang Chao, Cheng Renhui, Zhao Yajie

Coal Geology & Exploration

This study aims to promote the precise and intelligent monitoring of gas drainage boreholes. In the engineering background of a coal mine in Shanxi Province, this study conducted simulation experiments on the plugging of gas extraction boreholes under varying particle size ratios of simulated coal samples using distributed optical fiber monitoring and the Brillouin Optical Time-Domain Analysis (BOTDA). Then, this study established a mathematical model for calculating the borehole plugging rate of the test mine, revealing the deformation and collapse patterns of gas drainage boreholes. Furthermore, this study proposed a precise in-situ monitoring technology for the gas drainage boreholes in …

An Experimental Study Of Factors Influencing Gas Seepage In Confined Broken Anthracite, Li Zhen, Yu Yirui, Wang Hongwei, Feng Guorui, He Fulian, Wang Dezhang, Zhou Jinhui, Liu Luyan, Han Xinlei

Coal Geology & Exploration

The void structure evolution of broken coals in a caving zone directly affects the gas seepage characteristics of the zone, further influencing the gas migration and enrichment patterns in abandoned coal mine goaves. With the second generation of compaction-seepage-CT scanning experimental system for broken coals independently designed and developed, this study performed 162 sets of permeability experiments on broken anthracite samples with five particle size ranges under varying gas pressures, axial stresses, and void fractions. Key findings are as follows: (1) When gas migrated in broken anthracite, its pressure and flow rate kept dynamically changing until the adsorption equilibrium was …

Positioning Error Compensation Of Drilling Robot Arm For Coal Mine, Liang Chunmiao, Yao Ningping, Yao Yafeng, Peng Tao

Coal Geology & Exploration

At present, the pose of drilling robots is mostly adjusted by manual remote control and manual retest in combination. Full automatic adjustment has not been achieved. Besides, due to the low precision of open-loop control and inadequate automation capability, the accurate hole positioning and automatic construction of hole groups cannot be realized by drilling robots with water exploration and discharge, outburst prevention and punching prevention in coal mines. Herein, the kinematic model of drilling arm was established by analyzing the structure and action of the drilling robot’s drilling arm. Meanwhile, the dip angle factors such as machining error, body deformation …

Operation Process Identification For Intelligent Drill Rig Base On Analytic Hierarchy Process, Zhu Qianxiang, Luo Pengping, Wang Longpeng, Xing Wang, Wang Tianlong

Coal Geology & Exploration

It is very difficult to automatically identify the current process during the intelligent construction of coal mine drill rigs. In response to this, an operation process identification method was proposed, which includes hierarchical modeling of drill rig operation and probability inference of process execution. Firstly, the coupling process among the components of different granularity during the operation of drill rig is described and modeled based on the hierarchical analysis method, which reveals the interactive characteristics between equipment, function and system during the execution of each process. Secondly, Bayesian probabilistic reasoning method is introduced based on the above research to establish …

03.25.2024 Orsp Connect, Liz Williamson

ORED Newsletter

Cammi Thornton, Compliance Training Requirements

Assessment Of Pollution Sources For The Lake Burullus Influent Drains At The North Of Egypt, Aya Hassan

Civil Engineering

Assessment of Pollution Sources for the Lake Burullus Influent Drains at the North of Egypt. Egyptian northern region is facing significant pollution issues due to various factors such as fish farming expansion, industrial activities, and agricultural drainage water that enters the lake from the north through different drains. This pollution has detrimental effects on the lake's ecology and economy. The main goal of this study is to assess the current state of the influent drains into the Lake Burullus, that represent the second largest lake in the northern lakes of Egyptian. The water quality parameters in the influent drains to …

Lrs: Enhancing Adversarial Transferability Through Lipschitz Regularized Surrogate, Tao Wu, Tony Tie Luo, Donald C. Wunsch

Computer Science Faculty Research & Creative Works

The Transferability of Adversarial Examples is of Central Importance to Transfer-Based Black-Box Adversarial Attacks. Previous Works for Generating Transferable Adversarial Examples Focus on Attacking Given Pretrained Surrogate Models While the Connections between Surrogate Models and Adversarial Trasferability Have Been overlooked. in This Paper, We Propose Lipschitz Regularized Surrogate (LRS) for Transfer-Based Black-Box Attacks, a Novel Approach that Transforms Surrogate Models towards Favorable Adversarial Transferability. using Such Transformed Surrogate Models, Any Existing Transfer-Based Black-Box Attack Can Run Without Any Change, Yet Achieving Much Better Performance. Specifically, We Impose Lipschitz Regularization on the Loss Landscape of Surrogate Models to Enable a Smoother …

A Method For Coal Seam Pressure Relief Based On Steel Cone Impact, Ren Zhimin, Lyu Mengjiao, Wang Fei, Wang Yu, Zhang Guangtai

Coal Geology & Exploration

This study aims to solve the mining safety problems caused by rock bursts in coal mines. With the geological mining conditions of the No.3 coal seam in the Wulihou coal mine in Zuoquan County, Jinzhong City, Shanxi Province as the engineering background, this study proposed a method for coal seam pressure relief based on steel cone impact. Specifically, based on the electromagnetic repulsion generated between energized coils, this study derived the functions of impact force produced when a magnetically driven coil-wound steel cone impacted the coal seam. Combining the theory on elastic mechanics, this study analyzed the stress field distribution, …

Two-Phase Flow Chokeling Results And Control In High-Pressure Gas Wells Producing Water, Liu Xinfu, Liu Chunhua, Li Qingping, Yao Haiyuan, Hao Zhongxian, Liu Yongfei

Coal Geology & Exploration

Prediction and control of two-phase flow chokeling in tight gas wellbores are essential for the normal operation and hydrate control of high-pressure gas wells producing water. The thermodynamic differential equations of energy, kinetic energy and temperature and models of chokeling field for two-phase energy, system heat, mass balance and flow were developed under the conditions of isentropic adiabatic, isobaric heat capacity, constant volume heat capacity, and chokeling energy. A methodology on predicting characteristics and control of two-phase flow before and after chokeling was proposed for gas-water two phase flow. It provided a theoretical basis for optimizing the structural parameters of …

High-Accuracy Reconstruction Of Missing Ground-Penetrating Radar Signals Based On Projection Onto Convex Sets In The Curvelet Domain, Wu Qiming, Wang Honghua, Xi Yuhe, Wang Yucheng

Coal Geology & Exploration

Influence by the acquisition environments and instrument performance, missing signals and destructed channels are inevitable in measured ground-penetrating radar (GPR) profiles. They can cause event discontinuity of reflected and diffracted waves generated by targets, severely impairing the accuracy and resolution of subsequent processing and imaging. Hence, by combining the projection onto convex sets (POCS) algorithm extensively used in image processing with the curvelet transform exhibiting high sparsity, this study proposed a high-accuracy reconstruction method for missing GPR signals based on curvelet-domain POCS. Building on the compressive sensing theory, the objective function for missing signal reconstruction based on discrete curvelet transform …