Engineering Commons^™

The Use Of Repurposed Whole Textiles To Modify The Mechanical And Hydrogeological Properties Of Green Roof Media And Granular Soils, Angelis Almanzar-Chevalie, Yehya Elfgeeh, Calvin O. Walters Jr.

Publications and Research

This study investigates using repurposed whole textiles to modify the mechanical and hydrogeological properties of lightweight Green Roof media and granular pavement soils.

Green Roof Media Green roofs aim to bring the advantages of suburban agriculture to urban environments while improving energy efficiency and enhancing stormwater management in public, commercial, and residential buildings. Previous studies by City Tech undergraduate research assistants demonstrated significant modification in hydrogeological properties when incorporating textile fabric up to 3% textile by weight (%Tex) at an aspect ratio of 1:1. The effects of mixing repurposed whole textile fiber with Green Roof media is evaluated with regards …

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

A Comprehensive Review Of Fischer-Tropsch Synthesis Processes To Produce Sustainable Diesel And Aviation Fuel, Joseph C. Steinagel

Honors College Theses

The greatest threat known to humankind today is global warming. It affects every nation on the planet and the natural order of all living things. Consequently, this ongoing crisis necessitates action to scientifically revolutionize important areas of society, including researching modern adaptations of the transportation industry. In that regard, it has been determined that an effective short-term answer to eliminating carbon emissions is to produce sustainable fuels that run cooperatively with the well-established machines of today. Sustainable aviation fuel (SAF) is one such topic of interest, and the Fischer-Tropsch synthesis process is an effective way of producing SAF. To that …

Brain Computer Interface-Based Drone Control Using Gyroscopic Data From Head Movements, Ikaia Cacha Melton

Honors College Theses

This research explores the potential of using gyroscopic data from a person’s head movement to control a DJI Tello quadcopter via a Brain-Computer Interface (BCI). In this study, over 100 gyroscopic recordings capturing the X, Y and Z columns (formally known as GyroX, GyroY, GyroZ) between 4 volunteers with the Emotiv Epoc X headset were collected. The Emotiv Epoc X data captured (left, right, still, and forward) head movements of each participant associated with the DJI Tello quadcopter navigation. The data underwent thorough processing and analysis, revealing distinctive patterns in charts using Microsoft Excel. A Python condition algorithm was then …

Navigating The Relationships Among Food Waste Practices, Environmental Intentions, And Sustainability Knowledge Of Students, Merri Claire Minshew

Honors College Theses

Colleges and university campuses are among the greatest food wasters in the US due to combined over production and plate waste from consumers. While some schools have developed programs aimed at reducing and sustainably managing food waste, much of it ends up in landfills and produces greenhouse gas emissions. The overall goal of the research was to collect a comprehensive data set on university students’ food waste practices and behavior, environmental and sustainability knowledge, and environmental intentions. For probing relationships among these drivers, a structural equation model and student survey was developed. The survey of 37 questions was collected on …

Autonomous Bottling And Packaging System - Mechanical Bottling Portion, Kathryn Gray

Honors College Theses

This report details the complete mechanical design of an autonomous bottling automation system. This system is fully integrated with a bottling and packaging system. The scope of the full project is to successfully bottle and cap twelve small bottles (approximately 68 cm3) in under three minutes and thirty seconds. The bottles shall be filled with an “electrolyte” and water mixture, and the mixture should be fully mixed. To complete this task, two tanks will dispense liquid (one electrolyte, and one water) into the bottles. Each tank shall have a measuring chamber, that will fill with the correct amount of volume …

Variable Design Stent To Prevent Stent Failure In Areas Of High Mobility In Peripheral Artery Disease Patients, Emmie Stevens, Brennan Toepfer, Lexi Graves

Honors Theses

As senior biomedical engineering students at the University of Mississippi, we were tasked with a senior project to find an unmet clinical need in the healthcare industry and design a way to solve it. Our team, consisting of Hannah Dunn, Lexi Graves, Emmie Stevens, and Brennan Toepfer, decided to improve upon current stents to create a stent more suited to treating Peripheral Artery Disease (PAD), especially in high-impact areas, such as the back of the knee joint. Stents placed in the back of the knee have a high level of stent failure due to the high movement of the knee …

Minimizing Patient Migration: Enhancing Safety And Comfort For Patients And Caregivers In Bedridden Care, Danielle Pasquini

Honors Theses

Biomedical engineering seniors at the University of Mississippi embark on a senior project aimed at addressing an unmet clinical need. Our team, consisting of Kelsie Hand, Christian Miller, and Danielle Pasquini, identified a prevalent issue of bedridden patients slipping down in bed, leading to increased repositioning by caregivers. This not only impacts patient comfort but also poses risks of complications such as pressure ulcers and caregiver injuries. In our efforts to tackle the issue of patient slippage among bedridden individuals, our team introduced a novel solution comprising a non-slip vest for patients and a corresponding non-slip sheet attachment. This integrated …

Climate Change Impacts On Bridge Scour Risk In New York State, Alexis Torres

Publications and Research

Bridge scour, the erosion of sediment around bridge foundations, is the leading cause of bridge failure in the United States. This problem is exacerbated by severe storms and the impacts of climate change, which can increase the risk of scour-related bridge failures. Effective prioritization and mitigation of scour risks is crucial for enhancing the resilience of transportation networks. Addressing the level of Scour to abutments that are submerged in large bodies of water caused by climate is a monumental task and operation to facilitate.

Whispers Of Ai: Unveiling The Paradox Of Gpt Titans, Faria R. Promi, Qing Qing Zhuo

Publications and Research

The advent of large-scale language models, such as GPT, has sparked a revolution in artificial intelligence, enabling computers to comprehend and generate human-like text with remarkable ease. These models can write articles, answer questions, and even engage in conversations that mimic human speech. While their abilities are impressive, concerns about their societal impact abound. This research project dives deep into exploring the multifaceted aspects of these AI titans. We will investigate the positive aspects of big talking AI models through a thorough examination of existing literature, real-world examples, such as their potential to enhance education, entertainment, and customer service experiences. …

Unveiling Hidden Patterns: Real-Time Experiments With Wi-Fi Signal Strength And Location Data Indoors, Tomas Valentin, Li Geng

Publications and Research

Real-time indoor location tracking is indispensable for numerous applications spanning healthcare equipment management, security, navigation, and smart building operations. However, accurately determining the relationship between location and signal strength can be challenging due to indoor multipath phenomena. In this study, we propose an approach to address this challenge by developing a robot car using the GoPiGo3 Raspberry Pi kit. The robot car will navigate indoor environments autonomously, continuously transmitting timestamped coordinate data to a software platform. Leveraging advanced data analysis techniques, we aim to uncover hidden patterns within the collected data, elucidating the intricate relationship between location and signal strength …

An Overview Of The Product Development Process For A Lounging Grove Chair: The Rebel Lounge, Gracey Massengill

Honors Theses

This report focuses on the process of completing my senior capstone project for the Center for Manufacturing Excellence with my teammates, Andrew Brady, Carter Doss, Brooke Grissinger, and Karson Wardell. It explains the development, design and manufacturing of the Rebel Lounge Chair, a comfortable, portable and versatile chair made with the University of Mississippi Grove in mind and the prospective customers that would purchase such a chair. The report describes the phases of brainstorming, market research, prototyping, manufacturing process development, and accounting analysis that the Rebel Lounge capstone team went through to create their product.

Due to out-of-the-box brainstorming and …

Spin Coating Multilayer Polymer Films To Improve The Consistency And Longevity Of Interval Drug Release, Katherine Nevils

Honors Theses

Treatment-resistant depression (TRD) is a clinical diagnosis for patients suffering from major depressive disorder (MDD). An inadequate response to the dosage or duration of antidepressant medication can lead to the diagnosis of TRD. This diagnosis is common in up to 50% of patients with MDD following treatment. Microdosing of classical psychedelics such as lysergic acid diethylamide (LSD) has been shown to have positive cognitive and therapeutic effects on patients with TRD. However, issues of patient compliance to the complex regimen and abuse/diversion of the schedule I controlled substances remain unresolved. The goal of this project is to create an implantable, …

Creating A Collapsible Sling Lift Capable Of Transporting Patients Between Various Locations, Cameron Delaney Hillman, Macey Jewell Ross, Lydia Noel Miller

Honors Theses

As Senior Biomedical Engineering students at the University of Mississippi, we, Lainey Hillman, Lydia Miller, and Macey Ross, are required to complete a final senior capstone for our department. This project aims to provide a solution to a current unmet clinical need in the healthcare industry, thus our team sought to improve the lack of transportability of sling lifts. The current sling lifts on the market display numerous issues: heavy, bulky, use confined to certain areas, and use specific for only one type of transportation. To combat these problems, we designed a sling lift that was lightweight, collapsible, safe, and …

Creating A Collapsible Sling Lift Capable Of Transporting Patients Between Various Locations, Macey Jewell Ross, Cameron Delaney Hillman, Lydia Noel Miller

Honors Theses

As Senior Biomedical Engineering students at the University of Mississippi, we, Lainey Hillman, Lydia Miller, and Macey Ross, are required to complete a final senior capstone for our department. This project aims to provide a solution to a current unmet clinical need in the healthcare industry, thus our team sought to improve the lack of transportability of sling lifts. The current sling lifts on the market display numerous issues: heavy, bulky, use confined to certain areas, and use specific for only one type of transportation. To combat these problems, we designed a sling lift that was lightweight, collapsible, safe, and …

Population At Risk: The Design And Production Of The Pollinator Plaza, Shane Houston Stephens

Honors Theses

This report focuses on the development and manufacturing of the Pollinator Plaza, a high-quality bug house created to combat pollinator population loss. According to countless studies, pollinator populations have seen a dramatic decrease in recent years, and this product was developed to address these alarming statistics by providing a suitable habitat for pollinators. A market analysis was used to identify our potential clientele and cost point. This research played an integral part in the design of the Pollinator Plaza, which was developed using AutoCAD software. This design became a reality through the construction of a physical prototype.

The Pollinator Plaza’s …

Synthesis And Analysis Of A Novel Magnetic Surfactant, Donovan Turpin

Honors Theses

Researchers in the University of Mississippi Chemical Engineering Department have suggested that chelation of a large magnetic transition metal, namely dysprosium, into the large polar head group of a surfactant could result in a magnetic surfactant. This project was aimed at synthesizing a surfactant with a large enough head group and negative charge (specifically EDTA) to support this ion and demonstrating that the chelation process was successful. If so, the molecule would ideally be capable of forming micelles which could extract oily substances from water using a strong magnet—possibly applicable to environmental crises like oil spills.

NMR analysis has suggested, …

The Effects Of Uv Degradation On Polycarbonate Plastics Under Dynamic Compressive Loading, Hannah Bradford

Honors Theses

The objective of this experiment was to analyze the dynamic properties of polycarbonate plastics subjected to accelerated ultraviolet (UV) exposure. This was done by subjecting rods of polycarbonate plastic to UV degradation in a QUV accelerated weathering machine for 375, 750, and 1500-hours. These rods were then tested under dynamic compression using a Split-Hopkinson Pressure Bar at an average strain rate of 1600/s. The Split-Hopkinson pressure bar works by rapidly compressing a sample between 3 axial rods sending an elastic wave through the sample. The strain gauges on the incident rod and the transmission rod transformed the elastic wave deformation …

Practical Static Binary Instrumentation Attacks Against Binary Stylometry, Justin Lee Carpenter

Masters Theses, 2020-current

Binary stylometry aims to find the features in a binary computer program and use them to identify the developers of the corresponding source code. Despite the noises in the code compilation process from the compiler, assembler, linker, and library functions, two existing studies based on machine learning for binary stylometry have reported high success rates (Alrabaee, Shirani, Wang, Debbabi, and Hanna 2018; Caliskan, Yamaguchi, Dauber, Harang, Rieck, Greenstadt, and Narayanan 2018). In this thesis, we first observe that both existing studies are based on a largely benign security model and assume that the binaries used in testing and prediction are …

The Conceptual Design, Analysis And Optimization Of A Hydrogen Combustion And A Hydrogen Fuel-Cell Powered Aircraft, Michael Kiely

McKelvey School of Engineering Graduate Student Theses & Dissertations

In the effort to combat climate change worldwide, the aviation industry faces particularly complex design challenges in designing new, emission free vehicles. One potential solution to this problem is the use of hydrogen fuel as a means of propulsion. Hydrogen fuel has many benefits over traditional jet fuel such as a higher gravimetric energy density; however, it requires the aircraft to carry large, pressurized, cryogenic fuel tanks. This thesis examines the design challenges, potential solutions, and the analysis methods for the design of a short to medium range hydrogen powered commercial airliner. To accomplish this goal, a comprehensive conceptual design …

Emulsion Stability, Rheological Properties, And Combustion Characteristics Of Waterjojoba Biofuel Emulsion, Ihab Mohamed Ayad

Thesis/ Dissertation Defenses

This thesis comprehensively investigates the stability, rheological properties, and engine performance implications of water in jojoba biodiesel (WJBD) emulsion. The research delves into multiple aspects, including the influence of diverse surfactants and water concentrations on emulsion stability. It also yields valuable insights into the development of stable water in jojoba biodiesel emulsions, specifically tailored for diesel engines. These insights contribute significantly to the body of knowledge of positioning emulsion fuels as viable alternative to traditional diesel fuels. The anticipated benefits include notable reductions in emissions. Importantly, this study underscores the critical importance of considering emulsion stability, both during storage and …

Flexible Strain Gauge Sensors As Real-Time Stretch Receptors For Use In Biomimetic Bpa Muscle Applications, Rochelle Jubert

Student Research Symposium

This work presents a novel approach to real-time length sensing for biomimetic Braided Pneumatic Actuators (BPAs) as artificial muscles in soft robotics applications. The use of artificial muscles enables the development of more interesting robotic designs that no longer depend on single rotation joints controlled by motors. Developing robots with these capabilities, however, produces more complexities in control and sensing. Joint encoders, the mainstay of robotic feedback, can no longer be used, so new methods of sensing are needed to get feedback on muscle behavior to implement intelligent controls. To address this need, flexible strain gauge sensors from Portland company, …

Comparative Life Cycle Assessment Of Hydrogen Production Via Various Pv-Assisted Electrochemical Water Splitting Techniques, Achyuth Ravilla, Ilke Celik

Student Research Symposium

Photoelectrochemical (PEC) and photovoltaic-electrochemical (PV-EC) water-splitting technologies have emerged as cost-effective options for large-scale green hydrogen production in industrial applications. Solar to hydrogen (STH) efficiencies of these technologies have reached up to 20% and several pathways have been explored to drive down the cost of hydrogen using these technologies to less than $2/kg. However, the environmental impact assessment of these technologies for industry-scale deployment has not been explored in previous studies. This study assesses the environmental impacts of PEC and PV-EC technologies by conducting a cradle-to-gate life cycle assessment. The functional unit considered for this assessment is 1 kg of …

Performance-Based Risk Assessment For Large-Scale Transportation Networks, Anteneh Deriba, David Y. Yang

Student Research Symposium

Efficiently assessing the risk of asset failure due to deterioration or extreme events is crucial for transportation asset management. Traditional methods often lack effectiveness in directly evaluating system performance-based risks, facing challenges like the exponential increase in system states and the emergence of low-probability high-consequence events ("grey swan" events). To address these, this paper introduces a novel performance-based risk assessment approach for large-scale transportation networks, inspired by the Transitional Markov Chain Monte Carlo (TMCMC) method. This method transforms the risk assessment problem into a high-dimensional posterior distribution, with system risk acting as the normalization factor (evidence). It also provides risk-based …

Reducing Switching Noise And Losses In Two-Stage Electric Power Converters, Abhijeet Prem

Student Research Symposium

Advancements in semiconductor devices are enabling the design of better electrical power converter systems. Wide Bandgap (WBG) switching devices from Silicon Carbide and Gallium Nitride can operate at high temperatures, voltages, and frequencies with faster turn-on/off periods, improving converter performance over silicon devices. However, WBG technology is still new, and the rapid switching transitions of these devices lead to issues such as voltage overshoots, ringing, and electromagnetic interference, which need to be addressed for widespread adoption. This work introduces a new control method for reshaping the switching voltages, which overcomes the disadvantages of fast transition time without increasing the system's …

Plasma Ion Source, Nathan K. Davis

Student Research Symposium

It is well known that a plasma can be created with both high input power and ultra low pressure. The challenge is in creating these same plasma characteristics with both lower power while maintaining a higher pressure. We have developed an ion beam by careful manipulation of magnetic and electric fields. Magnetic fields are used to accelerate ambient electrons to ionize the low pressure gas into a plasma. Electric fields are used to extract the ions into a focused beam. To achieve these initial ionizations, an artificial vacuum is created to reach low enough pressures to ionize the gas. A …

Characterization Of Chopped Carbon Fiber Reinforced Composites Produced Using Fused Deposition Modeling, Jonathon Tran, Rachel Shubella

Student Research Symposium

Fused deposition modeling (FDM) is an additive manufacturing (AM) process which can create parts with complex geometries in their final shape without need for additional specialized tools or devices. The FDM process builds parts by adding material layer by layer only where it is needed, saving energy, costs, production time for complex parts, and minimizing waste. Fiber reinforcement can significantly enhance the mechanical properties of a polymer material and depends significantly on the fiber length distribution and fiber orientation distribution of the final part. In this research, we investigated the various infill patterns of FDM printed Markforged onyx which is …

Comparative Life Cycle Assessment Of Recycling Processes For Perovskite Solar Cells, Juan P. Herrera, Jules Freeman, Achyuth Ravilla, Ilke Celik

Student Research Symposium

Perovskite solar cells (PSCs) have emerged as a promising option for solar energy generation. However, it is essential to consider the environmental impact of these innovative photovoltaic (PV) technologies as the industry moves towards commercialization. Researchers are currently exploring ways to recycle PSCs to recover valuable materials and reduce their environmental impact at the end of their life. To ensure the sustainability of PSCs, this study evaluates and compares the environmental impacts of five recently developed recycling approaches. The Tool for Reduction and Assessment of Chemicals (TRACI) method was utilized to measure environmental impacts in categories such as acidification (kg …

Pulse Modulation In Braided Pneumatic Actuators Mimics Contractile Behavior Of Biological Muscles, Mohamad Elzein

Student Research Symposium

Advancements in robotics and bioengineering aim to emulate biological muscle systems through robotic actuators, blending mechanical strength with biological adaptability. A lesser-explored aspect is mimicking the pulse-like control characteristic of biological muscles, which contract in response to action potentials from motoneurons, with muscle contractile force relying heavily on the timing between these potentials. This study explores the effect of pulse lengths and the gaps between pulses on braided pneumatic actuators (BPAs), which mimic the nonlinearity and dynamic response of biological muscles. It hypothesizes that artificial muscles utilizing pulse-based control will exhibit a similar force dependency on the intervals between pulses …

Self-Balancing Robot Leg, Ben Bolen

Student Research Symposium

Research in the Agile and Adaptive Robotics Lab involves the creation of biomimetic robots. To this end, we developed a self-balancing robot leg actuated with braided pneumatic actuators (BPAs)—a type of pneumatic artificial muscle. These BPAs, akin to human muscles, exhibit properties such as high strength-to-weight ratio and tunable passive stiffness. An Inertial Measurement Unit (IMU) was placed on top of the tibia for feedback and the tibia and foot were connected with a hinge joint. The orientation of the ankle joint was controlled with an Arduino microcontroller sending commands to the proportional pressure valves supplying the BPAs. Leg balance …