Engineering Commons^™

Problem Solving / Javascript Programming, Sarah Zelikovitz, Orit D. Gruber

Open Educational Resources

This Lab Experiment focuses on JavaScript Programming. Upon completing the lab, you will be able to understand the following:

· The definition of Algorithmic Problem Solving.

· The role of JavaScript in web pages.

· The concept of Iteration in computer programming.

Automated Flood Prediction Along Railway Tracks Using Remotely Sensed Data And Traditional Flood Models, Abdul Rashid Zakaria, Thomas Oommen, Pasi Lautala

Michigan Tech Publications

Ground hazards are a significant problem in the global economy, costing millions of dollars in damage each year. Railroad tracks are vulnerable to ground hazards like flooding since they traverse multiple terrains with complex environmental factors and diverse human developments. Traditionally, flood-hazard assessments are generated using models like the Hydrological Engineering Center–River Analysis System (HEC-RAS). However, these maps are typically created for design flood events (10, 50, 100, 500 years) and are not available for any specific storm event, as they are not designed for individual flood predictions. Remotely sensed methods, on the other hand, offer precise flood extents only …

Design Of A Pick-And-Place Robot With Computer Vision And Optimized Sorting Algorithms, Dan Kilula

Student Theses and Dissertations

In computer science, the Multiple Travelling Salesman Problem (mTSP) is a special case of Travelling Salesmen where one salesman travels through a network of cities (end nodes) and goes back to the starting city (start node) rather than stopping at the targeted end node. Numerous search and optimization algorithms are used to find the most time-efficient path for the salesman to visit each node. In this work 3 optimization methods and algorithms such as linear programming and A* pathfinding are utilized and compared to solve the mTSP applied to a 3 degrees-of-freedom pick-and-place robot that uses computer vision to detect …

Probabilistic Estimation Of Cadence And Walking Speed From Floor Vibrations, Yohanna Mejiacruz, Juan M. Caicedo, Zhaoshuo Jiang, Jean M. Franco

Faculty Publications

Objective: This research aims to extract human gait parameters from floor vibrations. The proposed approach provides an innovative methodology on occupant activity, contributing to a broader understanding of how human movements interact within their built environment. Methods and Procedures: A multilevel probabilistic model was developed to estimate cadence and walking speed through the analysis of floor vibrations induced by walking. The model addresses challenges related to missing or incomplete information in the floor acceleration signals. Following the Bayesian Analysis Reporting Guidelines (BARG) for reproducibility, the model was evaluated through twenty-seven walking experiments, capturing floor vibration and data from Ambulatory Parkinson’s …

Lunar: Automated Input Generation And Analysis For Reactive Lammps Simulations, Josh Kemppainen, Jacob R. Gissinger, S. Gowtham, Gregory Odegard

Michigan Tech Publications

Generating simulation-ready molecular models for the LAMMPS molecular dynamics (MD) simulation software package is a difficult task and impedes the more widespread and efficient use of MD in materials design and development. Fixed-bond force fields generally require manual assignment of atom types, bonded interactions, charges, and simulation domain sizes. A new LAMMPS pre- and postprocessing toolkit (LUNAR) is presented that efficiently builds molecular systems for LAMMPS. LUNAR automatically assigns atom types, generates bonded interactions, assigns charges, and provides initial configuration methods to generate large molecular systems. LUNAR can also incorporate chemical reactivity into simulations by facilitating the use of the …

Photodegradation And Microencapsulation Of Organic Thermochromic Material For Application As Building Coating Envelope, Sushant Madhukar Nagare

USF Tampa Graduate Theses and Dissertations

Due to exponential urbanization, residential building electrical loads have increased over the past decades. Also, deforestation has led to increased urban heat island effects, due to which summer has been scorching and winter has become freezing. This further increases the load on generation due to the extensive use of heating and cooling systems. New techniques, such as cool building materials and green building concepts, compensate for the load. The building can be coated with a material that has heat reflectivity capability for summer and heat-trapping capability for winter. One such material is thermochromic, which turns white upon heating and black …

Advances In Model Reference Adaptive Control: Exploring Gain Scheduling, Scalability, And Time-Varying Command Following, Jesse Jaramillo

USF Tampa Graduate Theses and Dissertations

Feedback control architectures are fundamental for achieving a desired response in physical systems. A robust and reliable design must account for system uncertainties and exogenous disturbances, which may arise from phenomena such as modeling approximations, nonlinearities, degraded modes of operations, wind gusts, or structural impairments. Two widely recognized methods to mitigate the negative impact of uncertainties and disturbances are robust and adaptive control architectures. Specifically, robust control designs ensure stability by considering a worst-case scenario, which can potentially lead to suboptimal performance or steady-state errors depending on the nature of the uncertainty. In contrast, adaptive control designs offer the capability …

Work In Progress: Development Of A Bootcamp For Freshman Student Success During Covid-19 Transition, Noe Vargas Hernandez, Arturo A. Fuentes, Javier A. Ortega, Laura Benitez, Edna Orozco-Leonhardt

Mechanical Engineering Faculty Publications

Assessment results show that passing rates in introductory courses and retention rates of firstyear students in the College of Engineering and Computer Science at The University of X, a predominantly Hispanic Serving Institution (HSI), significantly dropped with the onset of COVID-19. These results and trends highlight the academic preparation of incoming students, particularly the new cohort of underrepresented Hispanic students from underserved and challenged communities in the region, who may not have the necessary skills (e.g., adaptability, persistence, and performance) for the rigor of engineering education. To address this challenge, an onboarding “boostcamp” was created for incoming and transfer students …

Board 294: Hsi Implementation And Evaluation Project: The Freshman Year Innovator Experience (Fyie): Bridging The Urm Gap In Stem, Noe Vargas Hernandez, Javier Ortega, Arturo A. Fuentes, Eleazar Marquez

Mechanical Engineering Faculty Publications

The Freshman Year Innovator Experience (FYIE) program at The University of X, a Minority Serving Institution (MSI), aims to enhance the freshman experience for incoming students by developing key academic success skills. The program is developing self-transformation skills in freshman mechanical engineering students to help them overcome academic and professional challenges exacerbated by the COVID-19 pandemic. FYIE participants are taking two courses simultaneously: Introduction to Engineering (Course A) and Learning Frameworks (Course B). In Course A, students will complete a 6-week engineering design project, and in Course B, they are completing a 6-week academic career path project. During these parallel …

Work In Progress: Teaching Engineering Students To Self-Transform: Parallelisms Between Product Innovation And Student Career Path Planning, Noe Vargas Hernandez, Javier Ortega, Arturo A. Fuentes, Eleazar Marquez

Mechanical Engineering Faculty Publications

Freshman engineering students can have a hard time transitioning to college. The freshman year is critical to the students’ academic success; in this year they learn basic skills and establish essential networks with other students, faculty, and resources. How can we help these freshman engineering students in this transition? We propose that freshman students can learn from the engineering design innovation process and apply it by analogy to the design of their academic pathways. There are multiple similarities between product innovation (i.e., technology) and the continuous academic challenges faced by the student. Engineers as designers and innovators have a vast …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Factors Influencing The Productivity And Technology Optimization Of Horizontal Wells For Moderately Deep Coalbed Methane In The Northern Zhengzhuang Block, Zhang Cong, Li Kexin, Jia Huimin, Zhang Wuchang, Yang Ruiqiang, Li Jun, Wang Qi, Hou Weiming

Coal Geology & Exploration

[Objective] Hydraulic fracturing of vertical wells was adopted during the early production of moderately deep coalbed methane (CBM) of the northern Zhengzhuang block in the Qinshui Basin, generally yielding low productivity and inefficiency. In contrast, single-casing fracturing of horizontal wells has increased the single-well production to 10‒50 times that of vertical wells, establishing horizontal wells as the dominant development well type. However, the horizontal wells differ greatly in CBM production. This study aims to determine the factors influencing the productivity of horizontal wells using staged fracturing for moderately deep CBM in the northern Zhengzhuang block and improve the production performance. …

Characteristics Of The Pore And Seepage System Of Deep Coalbed Methane In The Baijiahai Uplift, Junggar Basin, Xinjiang, Chen Heqing, Yang Zhaobiao, Li Daoqing, Xu Miaomiao, Liang Yuhui, Liu Changqing, Wang Yuqiang

Coal Geology & Exploration

[Objective] Xinjiang boasts abundant deep coalbed methane (CBM) resources, with Jurassic coal seams in the Baijiahai uplift of the Junggar Basin identified as a favorable target area for deep CBM exploration and exploitation. The pore and seepage system of deep CBM directly determines its recoverability. [Methods] Based on appraisal well Caimei 2-004H drilled the most recently in the Xinjiang oilfield in 2023, this study investigated in detail the pore and seepage system of coals in the Jurassic Xishanyao Formation in the Baijiahai uplift using scanning electron microscopy (SEM) observations, mercury injection capillary pressure (MICP), low-temperature liquid nitrogen adsorption, and carbon …

Impacts Of Observation Line Layout Morphology And Survey Point Missing On The Inversion Of Predicted Parameters Of Mining Subsidence, Guo Qingbiao, Yu Qing, Zheng Meinan, Luo Jin

Coal Geology & Exploration

[Objective] Accurate prediction parameters for mining subsidence are important basis for full cycle green coal mining, while inversion based on the subsidence data of observation lines serves as the main method to obtain these parameters. [Methods] To quantitatively analyze the impacts of the observation line layout morphology and survey point missing on the inversion of prediction parameters for mining subsidence, this study developed a probability integral model-based inversion method for these parameters using the chimpanzee optimization algorithm (ChOA). Using this method combined with digital simulation experiments, this study predicted subsidence parameters under six observation line morphologies and survey point missing …

Fracturing Evolutionary Law And Energy Utilization Efficiency Of Green Sandstones Under Different Loading Rates, Zhao Huanshuai, Pan Yongtai, Qiao Xin, Wang Xingyu, Yu Chao, Huang Jiacheng

Coal Geology & Exploration

[Objective] This study aims to explore the fracturing evolutionary laws and energy utilization efficiency of rocks under different loading rates is a pressing issue in the field of rock fragmentation and processing. [Methods] To this end, the microscopic parameters of green sandstones were calibrated based on laboratory tests, followed by the identification of relationships between the macro- and microscopic mechanical responses of the sandstones. Using Particle Flow Code (PFC), this study investigated the stress-strain curves and stress chain distribution of green sandstones under different loading rates. Then, based on the fracturing and crack characteristics, this study analyzed the fracturing evolutionary …

Hydrochemical Characteristics And Genetic Mechanism Of Geothermal Water In The Wandong Geothermal Area Along The Moxi Fault In Western Sichuan, Huang Xun, Zhang Yunhui, Li Xiao, Lyu Guosen, Guo Hongyang

Coal Geology & Exploration

[Objective] Geothermal energy exploitation is identified as a vital way to achieve the goals of peak carbon dioxide emissions and carbon neutrality. The Moxi fault, located in the southern segment of the Xianshuihe fault zone in western Sichuan, boasts abundant geothermal resources, serving as a significant area for subsequent geothermal energy exploitation. [Methods] This study investigated the hydrogeochemistry of the Wandong geothermal area along the Moxi fault, analyzed the water-rock interaction process in the area based on the hydrochemical correlation, and calculated the reservoir temperatures and the mixing ratios of cold and hot water using geothermometers and the silica-enthalpy mixing …

Experimental Study On The Mechanics And Deformation Failure Characteristics Of Multi-Source Coal-Based Solid Waste Cemented Backfill, Yang Ke, Zhang Jiqiang, He Xiang, Wei Zhen, Zhao Xinyuan

Coal Geology & Exploration

[Objective] In order to study the mechanical properties and deformation failure laws of multi-source coal-based solid waste cemented backfill (CBSWCB), the uniaxial compression, acoustic emission response and microstructure test experiments were carried out with 5 types of typical coal-based waste. [Methods] The factors influencing the uniaxial compressive strength of CBSWCB, as well as their interaction, were analyzed, and a four-dimensional spatial visualization model of the factors influencing the compressive strength based on their interactions was established. Besides, the mechanical evolution characteristics and macroscopic deformation failure laws under uniaxial compression conditions were elaborated by referring to the acoustic emission and microstructure …

Application Of Microseismic Monitoring System For Coal Mines To The Prevention And Control Of Water Disasters On Working Face Roofs, Fan Xin, Cheng Jianyuan, Li Sheng, Duan Jianhua, Fan Tao, Li Bofan, Wang Yanbo

Coal Geology & Exploration

[Objective] Increasing coal mining depth in coal mines has caused increasingly prominent risks of water disasters on working face roofs, which restrict the green, safe, and efficient coal mining in China’s coal mines. Therefore, there is an urgent need for new technologies for the monitoring and early warning of these water disasters. [Methods] This study explored the application of the joint well-ground microseismic monitoring system to the prevention and control of water disasters on working face roofs, achieving transparent, intelligent monitoring and early warning of water disaster risks. In this system, microseismic sensor arrays are arranged on the surface above …

Geological Structures Fine Monitoring Using Seismic-While-Tunneling Technique In Wangpo Mine, Zhao Huibo, Qin Si, Chen Chao, Guan Qi, Zhao Xingwei, Che Jianhang

Coal Geology & Exploration

Traditional tunnel seismic advance detection technology is limited by the use of explosives, the need for mining stoppages, prediction speed, detection range, and capabilities, making it challenging to meet the high-precision geological structure detection requirements of intelligent tunneling faces. In response, the seismic-while-tunneling technique utilizes the vibration of the roadheader cutting the coal wall as the seismic source. This method employs real-time data upload, automatic processing, and dynamic imaging. By leveraging information technology and software support, and utilizing real-time continuous super-saturation stacking supported by massive data, the imaging precision of geological anomalies ahead of the mining face is significantly enhanced. …

Pneumatic Directional Drilling Technology And Equipment For Broken-Soft Coal Seams In Underground Coal Mines, Tian Hongliang, Zhang Jinbao, Wang Li, Fang Jun, Wang Jianqiang

Coal Geology & Exploration

[Objective] The geological conditions of coal seams in China are complex, with a wide distribution of broken-soft coal seams, and a large number of wells have the problems of high gas and coal-gas outburst. Currently, borehole gas drainage is an effective measure for preventing and controlling the gas disasters. [Methods] In response to the problems of uncontrollable drilling trajectory, shallow drilling depth, large blind spots of drainage in conventional rotary drilling process of broken-soft coal seams, as well as multiple stuck drilling accidents, great difficulty in drilling and low drilling efficiency in conventional directional drilling processes, the development history and …

Build-Up Rate Prediction Of Rotary Steerable Tools Based On Delay Differentiation, Li Fei, Zhang Nan

Coal Geology & Exploration

[Objective] Accurate build-up rate prediction of rotary steerable tools is a prerequisite to achieve the precise control of tools. In order to grasp the variation law of the build-up rate of the rotary steerable bottom-hole assembly (RSBHA). [Methods] Based on the structural charaeteristics of the tool, the Euler-Bernoulli beam equation method is used to analyz the forces outing on the composite RSBHA. At the same time, the calculation method of the tool deflection angle in different sections and the bit pre-drilling deflection angle was obtained with consideration to the geometric relationship of the bottom-hole assembly, and the distance between the …

Analysis Of Three-Dimensional Nonlinear Fluid-Solid Coupling Vibration Characteristics Of Coalbed Methane Abandoned Well Plugging String, Xu Zhixin, Wan Jifang, Hong Yi, Liu Hangming, Yi Xianzhong, Diao Binbin, Wang Yanbin

Coal Geology & Exploration

[Objective] The plugging quality of cement plug in abandoned coalbed methane wells is critical to preventing pollutant leakage. Current standards for handling these wells involve simple mud pump injection, which often results in cement plugs with issues like particle agglomeration, bubbles, and micropores. These defects reduce the strength of the cement plug and compromise its sealing performance. [Methods] To address this, vibration technology is applied to the plugging operation, using a specialized tool to induce vibrations in the pipe string. This process enhances the fluidity of the cement slurry via the transmission of vibration energy, thereby improving the plugging quality …

Spatial Distribution And Influencing Factors Of Microseismic Events In Unequal-Length Mining Faces In Coal Mines, Zhou Jinyan, Yang Hongzeng, Gao Jietao

Coal Geology & Exploration

[Objective] The varying length of a mining face along its dip direction or adjusting mining significantly increases water inrush risks of the mining face. This study investigate the hazards and influencing factors brought by unequal length arrangements to the mining face is one of the key issues in deepening the research on coal mine water hazard prevention and ensuring the safe mining face. [Methods] With the No. 15240 mining face, consisting of a narrow part, a wide part, and a slope, in the Jiulong Coal Mine of the Jizhong Energy Fengfeng Group as the engineering background, a large amount of …

Development And Application Of A Supercritical Co2 Pulsed Fracturing-Seepage Coupling Test System, Liu Jiajia, Zhang Yunlong, Nie Zishuo, Gao Zhiyang, Xu Wensong

Coal Geology & Exploration

[Objective] To effectively enhance the extraction effects of coalbed methane (CBM), this study proposed a novel approach for fracturing coals (rocks) using pulsation of supercritical carbon dioxide (CO₂) by combining pulsed fracturing with supercritical CO₂ fracturing. [Methods] A true triaxial test system coupling supercritical CO₂ pulsed fracturing with seepage was independently developed, and its primary structure, characteristics, and functions were elucidated. Then, the supercritical CO₂ pulsed fracturing - seepage/acoustic emission monitoring tests under true triaxial conditions were conducted in the laboratory. The test system, controlling the triaxial stress by combining an independent servo system with …

Link Element Design For A Landing-Gear Mechanism In A Statics And Mechanics Of Materials Course, Amir H. Danesh-Yazdi, Aimee Cloutier, Sean Moseley

Faculty Publications - Mechanical Engineering

In this work, we describe a project involving a link element design for a landing gear mechanism as part of our Statics and Mechanics of Materials I course. During this project, students are asked to design a safe and lightweight linkage that will allow the landing gear to safely and slowly retract from a vertical position to a nearly horizontal one without breaking or stretching more than 10% of its original length. This project is introduced at the halfway point of the 10-week term, at which point students are familiar with the 2D equilibrium of rigid bodies and the concepts …

Remote Sensing Monitoring And Spatiotemporal Characteristics Of Co2 And Ch4 Concentrations In Coal-Electricity Production Bases, Xu Yanfei, Chen Yongchun, Li Jing, Liu Xiaozhou, Miao Wei, Zhao Derong, Rui Chengqi

Coal Geology & Exploration

[Objective] CO₂ and CH₄ are identified as the primary greenhouse gases emitted from energy production in coal-electricity production bases. Mointoring these emissions and analyzing their spatiotemporal distribution are essential components of building a carbon monitoring system in the study area. [Methods] This study investigated Huainan City, Anhui Province as an example to explore the spatiotemporal characteristics of CO₂ and CH₄ in coal-electricity production bases. Specifically, this study examined the CO₂ and CH₄ concentrations in the study area based on data from the GOSAT，OCO-2, and Sentinel-5P satellites，determining the column concentration changes and distribution of CO …

Investigation And Comprehensive Utilization Of Resources In Closed Coal Mines In Anhui Province, China, Liu Feiyue, Chen Wanyun, Yang Ke, Duan Minke, Liu Qinjie, Yang Lingyue

Coal Geology & Exploration

[Objevtive] With the continuously intensive exploitation of coal resources and the structural reform of energy supply, many coal mines in Anhui Province have been closed due to resource depletion or backward production capacity. However, the closed coal mines still host resources such as underground spaces, residual coals, gas, mine water, land, and infrastructure equipment. Hence, reutilizing resources in closed coal mines holds significant engineering value and economic benefits. [Methods] Based on the general information and reutilization status of 59 coal mines in Anhui Province that have been closed since 2013, this study analyzed the distribution characteristics, residual resources, and reutilization …

Physical Simulation Experiments On Mining-Induced Water Inrushes From Coal Seam Floors: Advances In Research And Prospects, Zhang Pingsong, Ou Yuanchao

Coal Geology & Exploration

[Objective] Water inrushes from floors are subjected to the superimposed effects of factors such as specific geological structures, water-rock-stress coupling, and mining disturbance, proving complex, concealed, and abrupt. [Methods] Physical simulation experiments can effectively reproduce the environments of the floors and confined water, intuitively present the whole process of both mining-induced fracture propagation in the floors and the path evolution of water inrushes, and obtain multi-source data of all disaster stages in a real time manner. Therefore, such experiments enjoy unique advantages in investigating water inrushes from floors. [Results and Conclusions] This study reviews the research achievements in water inrushes …

A High-Resolution Method For Processing Coal Measures Seismic Data Based On Anisotropic Medium Theories And Its Application, Li Huiting, Chang Suoliang, Zhang Sheng, Guan Wenyuan, Zhao Xing, Wang Weiqian, Tantai Mingjun, Gao Kaixin

Coal Geology & Exploration

[Objective] The increasing importance of the exploration and exploitation of deep resources poses new requirements for high-precision seismic exploration. Given that conventional isotropy-based data processing methods are no longer applicable to the coal-bearing strata with strong anisotropy. [Methods] This study proposed a method for processing seismic data based on theories of both transverse isotropy medium with a vertical symmetry axis (VTI) media and transverse isotropy with a horizontal axis of symmetry (HTI) media. First, to characterize the depositional characteristics of coal-bearing strata, this study analyzed the features of VTI media, revealing that high-order dynamic correction can effectively eliminate anisotropy-induced event …

Success Factors Analysis In Sorong-Manokwari Railway Infrastructure's Project Evaluation With Fuzzy Ahp Method, Flora Tresia Wehelmina Kambuaya, Ayomi Dita Rarasati

Smart City

An infrastructure project is a long-term project that has two consequences in the form of uncertainty related to risk and expansive costs. Are infrastructure projects a good long-run stimulus to growth economy? Particularly for new developing areas like Papua island where project preparation evaluation has to be established in order to implement the project. Railway infrastructure is a project initiated in 2018 by Indonesia President and is currently still under administration processing. As a new incubator project, the first train project in Papua Land contains several factors that may be essential to drive project success. The critical success factors as …