Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

2023

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 9571 - 9600 of 9707

Full-Text Articles in Engineering

Ssvep-Bci In Augmented Reality In Realistic Environment, Bhuwit Chaiyarit Jan 2023

Ssvep-Bci In Augmented Reality In Realistic Environment, Bhuwit Chaiyarit

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study investigates Augmented Reality-based Steady-State Visual Evoked Potentials (AR-SSVEP) in Brain-Computer Interface (BCI) systems, utilizing Extended Filter Bank Canonical Correlation Analysis (Extended-FBCCA) for SSVEP recognition optimization across various frequencies in various scenarios. The 10 Hz stimulus consistently achieves the highest recognition accuracy. Frequency-specific variations at 12 Hz, 13 Hz, and 15 Hz highlight nuanced SSVEP responses. White stimuli yield PC-SSVEP recognition ranging from 68.32% to 81.98%, slightly outperforming AR-SSVEP-Controlled (63.59% to 73.23%). Red stimuli impact AR-SSVEP-Controlled less than PC-SSVEP, with recognition ranges of 68.65% to 76.30% and 67.97% to 76.72%, respectively. Comparisons show a general slight outperformance of PC-SSVEP, …


การจำลองกระบวนการผลิตไฮโดรเจนจากผักตบชวาโดยกระบวนการซูเปอร์คริติคัลวอเตอร์แก๊สซิฟิเคชั่นร่วมกับกระบวนการไตรรีฟอร์มมิ่ง, สิริกุล บุญเติม Jan 2023

การจำลองกระบวนการผลิตไฮโดรเจนจากผักตบชวาโดยกระบวนการซูเปอร์คริติคัลวอเตอร์แก๊สซิฟิเคชั่นร่วมกับกระบวนการไตรรีฟอร์มมิ่ง, สิริกุล บุญเติม

Chulalongkorn University Theses and Dissertations (Chula ETD)

กระบวนการผลิตไฮโดรเจนจากผักตบชวาโดยกระบวนการซูเปอร์คริติคัลวอเตอร์แก๊สซิฟิเคชั่น (SCWG) ร่วมกับไตรรีฟอร์มมิ่ง (TR) ซึ่งประกอบด้วย ปฏิกิริยารีฟอร์มมิ่งด้วยไอน้ำยิ่งยวด (SR) ปฏิกิริยารีฟอร์มมิ่งด้วยก๊าซคาร์บอนไดออกไซด์ (DR) และปฏิกิริยายาออกซิเดชันบางส่วน (PO) ซึ่งเป็นการรวมกันของปฏิกิริยาคายและดูดความร้อน ด้วยตัวกลางอย่างคาร์บอนไดออกไซด์ (CO2), น้ำ (H2O), และออกซิเจน (O2) ถูกนำมาเป็นสารตั้งต้นร่วมกัน และกระบวนการอื่นๆ ผ่านการจำลองการออกแบบกระบวนด้วยแบบจำลองเครื่องปฏิกรณ์เคมีแบบสมดุลด้วยโปรแกรม Aspen plus V.12.1 เพื่อหาแนวทางการออกแบบที่ดีที่สุด โดยเริ่มจากการแตกตัวชีวมวลเพื่อศึกษาหาผลิตภัณฑ์หลักของกระบวนการคือก๊าซสังเคราะห์ อันได้แก่ H2 และ CO แล้วศึกษาหาสภาวะที่เหมาะสมในการผลิตแก๊สไฮโดรเจนผ่านกระบวนไบรีฟอร์มมิ่ง ซึ่งตัวแปรที่ศึกษามุ่งเน้นศึกษา ได้แก่ อุณหภูมิ, ความดัน, และความเข้มข้นของสารตั้งต้นที่ใช้ในกระบวนการผลิตไฮโดรเจน โดยที่สภาวะดำเนินการที่อุณหภูมิ 950 °C และความดัน 1 bar ได้ผลลัพธ์จากการจำลอง โดยมีเศษส่วนโมลของ H2 และ CO เท่ากับ 0.4773 และ 0.5227 ตามลำดับ และพัฒนาการออกแบบกระบวนการซูเปอร์คริติคัลวอเตอร์แก๊สซิฟิเคชั่นร่วมกับไตรรีฟอร์มมิ่งโดยที่สภาวะดำเนินการที่อุณหภูมิ 950 °C และความดัน 200 bar ได้ผลลัพธ์จากการจำลอง โดยมีเศษส่วนโมลของ H2 และ CO เท่ากับ 0.4536 และ 0.5212 ตามลำดับ


หุ่นยนต์เคลื่อนที่อัตโนมัติบนถนนภายนอกอาคาร, ดิษณ์กร วานิชรัตนกุล Jan 2023

หุ่นยนต์เคลื่อนที่อัตโนมัติบนถนนภายนอกอาคาร, ดิษณ์กร วานิชรัตนกุล

Chulalongkorn University Theses and Dissertations (Chula ETD)

หุ่นยนต์เคลื่อนที่แบบขับเคลื่อนสี่ล้อโดยเฉพาะชนิดที่ใช้การขับเคลื่อนแบบ skid-steering เป็นหุ่นยนต์ที่ใช้มากนอกอาคาร หุ่นยนต์ประเภทนี้มีการลื่นไถลขณะทำการเลี้ยว ทำให้อยากต่อการควบคุม โดยเฉพาะหุ่นยนต์ที่เคลื่อนที่แบบอัตโนมัติ วิทยานิพนธ์นี้ออกแบบและสร้างหุ่นยนต์เพื่อใช้การขับเคลื่อนแบบ skid-steering และ ใช้วิธีการแยกจุดศูนย์กลางหมุนของแต่ละล้อหรือ Instantaneous Center of Rotation (Separated ICR) เพื่อลดปัญหาการลื่นไถล นอกจากนั้นจะใช้กล้องสเตอริโอร่วมกับระบบ V-SLAM (Visual Simultaneous Localization and Mapping) เพื่อตรวจสอบความถูกต้องเมื่อหุ่นยนต์เคลื่อนที่ไปตามพื้นผิวต่าง ๆ ผลลัพธ์จากการทดลองแสดงให้เห็นถึงประสิทธิภาพในการชดเชยการลื่นไถลที่แตกต่างกันตามรัศมีการเลี้ยว ซึ่งจะพบว่าประเภทของพื้นผิวมีผลต่อวิธีการ Separated ICR ที่ใช้ในงานนี้น้อย ถึงแม้จะไม่สามารถประเมินความเสียดทานของพื้นผิวได้อย่างแม่นยำ ลักษณะของพื้นผิวไม่ส่งผลต่อประสิทธิภาพการลดการไถล ทำให้วิธีการดังกล่าวเหมาะสมต่อการนำไปใช้งานจริงกับหุ่นยนต์เคลื่อนที่แบบขับเคลื่อนสี่ล้อ นอกจากนั้นได้มีการจำลองการทำงานการไถลของระบบบังคับเลี้ยวแบบไถลโดยใช้โปรแกรมคอมพิวเตอร์ ผลที่ได้ออกมาจากการจำลองการไถลถึงแม้จะไม่เหมือนกับผลการทดลองอย่างแม่นยำ แต่ก็มีแนวโน้มการไถลในลักษณะใกล้เคียงกัน ผลที่แตกต่างกันอาจเนื่องมาจากการจำลองความเสียดทานของพื้นผิวทำได้ค่อนข้างยาก แต่พื้นผิวที่งานวิจัยนี้สนใจแบบจำลองความเสียดทานมีผลไม่มากกับประสิทธิภาพของการชดเชยการลี่นไถล นอกจากนั้นวิทยานิพนธ์นี้ได้พัฒนาระบบ SLAM และระบบนำทางสำหรับใช้ภายนอกอาคารซึ่งสามารถใช้งานได้ดีในสภาพแวดล้อมระหว่างอาคารที่มีทางลาดและมีพื้นต่างระดับกัน


การป้องกันการเกิดออกไซด์ของโลหะดีบุกผสมบิสมัท 1% โดยน้ำหนัก, ภควัต พลมณี Jan 2023

การป้องกันการเกิดออกไซด์ของโลหะดีบุกผสมบิสมัท 1% โดยน้ำหนัก, ภควัต พลมณี

Chulalongkorn University Theses and Dissertations (Chula ETD)

การเกิดฟิล์มออกไซด์ในดีบุกผสมบิสมัท 1% โดยน้ำหนักบนแผ่นขัดเงาจากปรากฎการณ์ออกซิเดชัน ทำให้ประสิทธิภาพของผงขัดบนแผ่นขัดเงาลดลง เพื่อให้ทราบถึงอัตราการเกิดออกซิเดชันในสภาวะที่ถูกจำกัดปัจจัยการเกิดฟิล์มออกไซด์คือ ออกซิเจนในรูปแบบต่าง ๆ เช่น ความชื้นในอากาศเป็นต้น จึงได้ทำการหาอัตราการเกิดออกไซด์ที่เกิดขึ้นโดยเทคนิคทางเคมีไฟฟ้า และทำการหาชนิดของฟิล์มที่เกิดขึ้นด้วยเทคนิคโฟโตอิเล็กตรอนสเปกโตสโกปี ปัจจัยที่ส่งผลในการเกิดออกซิเดชันที่ได้ศึกษาในงานวิจัยชิ้นนี้คือ เวลา และสิ่งแวดล้อมที่จำกัดออกซิเจนที่อุณหภูมิห้อง ผลของการทดสอบออกซิเดชันมีดังนี้ ในบรรยากาศปกติความชื้น 28%-35% พบการเกิดออกซิเดชันที่เป็นไปตามกฎของพาราโบลาที่มีสมาการคือ x = 8.7041t0.14 โดยที่ x คือความหนาของฟิล์มและ t คือเวลาที่ใช้ทดสอบออกซิเดชัน ในบรรยากาศแก๊สอาร์กอน, สุญญากาศ, บิวเทน และที่ห่อด้วยพลาสติก ไม่ได้ถูกจำกัดด้วยกฎพาราโบลา และมีแนวโน้มที่ฟิล์มจะมีความหนาน้อยกว่า แต่ต้องการเวลาในการทำการทดสอบมากกว่านี้เพื่อให้ได้ผลและแนวโน้มอัตราที่ชัดเจน ในการวิเคราะห์ผลจากเทคนิคโฟโตอิเล็กตรอนสเปกโตสโกปีในชิ้นงานที่ผ่านการทำออกซิเดชันในสุญญากาศและที่จัดเก็บด้วยการห่อพลาสติก พบว่าทั้งสองชิ้นงานโดยรวมแล้วมีชนิดของฟิล์มออกไซด์เป็นแบบเดียวกัน โดยจะประกอบไปด้วยไอออนของสารประกอบ SnO, SnO2, Sn(OH)2 และ Sn(OH)4 ซึ่งจากผลการทดลอง จะได้แบบจำลองของชั้นฟิล์มออกมาเป็นชั้น ๆ คือ ชั้นที่ 1 เป็นผิวนอกสุดมีออกไซด์ SnO2 และ Sn(OH)4 อยู่เป็นกลุ่มก้อนไม่สม่ำเสมอ (คลัสเตอร์) ชั้นที่ 2 เป็น SnO และ Sn(OH)2 ชั้นที่ 3 เป็น SnO2 และ Sn(OH)4


Loss Comparison Study Of Two-Level And Three-Level Inverters For Electric Vehicle Drives, Kaninnat Rosdee Jan 2023

Loss Comparison Study Of Two-Level And Three-Level Inverters For Electric Vehicle Drives, Kaninnat Rosdee

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis investigates the efficiency of wide bandgap (WBG) semiconductor devices, specifically silicon carbide (SiC) and gallium nitride (GaN), in electric vehicle (EV) traction drive systems using two-level and three-level voltage source inverters (VSIs). The research aims to compare power losses and efficiency improvements by employing WBG devices in the inverters. Simulation results demonstrate that WBG devices significantly reduce conduction and switching losses in both inverter topologies compared to conventional silicon insulated-gate bipolar transistors (Si-IGBTs). SiC MOSFET, in particular, shows over 40% reduction in conduction losses and over 60% reduction in switching losses, leading to an overall efficiency improvement of …


การวิเคราะห์ผลกระทบของค่าส่งผ่านไฟฟ้าที่มีต่ออัตราค่าไฟฟ้าฐานในประเทศไทย, ภูรินทร์ ขำสุวรรณ Jan 2023

การวิเคราะห์ผลกระทบของค่าส่งผ่านไฟฟ้าที่มีต่ออัตราค่าไฟฟ้าฐานในประเทศไทย, ภูรินทร์ ขำสุวรรณ

Chulalongkorn University Theses and Dissertations (Chula ETD)

โครงสร้างอัตราไฟฟ้าที่จะต้องสะท้อนถึงต้นทุนที่แท้จริงจากการลงทุนสินทรัพย์ การจัดหาพลังงานไฟฟ้า และเรียกเก็บในอัตราที่เหมาะสมและเป็นธรรม อย่างไรก็ตามในการจัดเก็บอัตราค่าไฟฟ้าจากประชาชนอาจยังไม่สะท้อนถึงต้นทุนอย่างชัดเจน เช่น ต้นทุนการก่อสร้างโรงไฟฟ้า ระบบส่ง และระบบจำหน่าย อีกทั้งยังมีโครงสร้างกิจการไฟฟ้าที่เป็นแบบผูกขาด ซึ่งอาจไม่ส่งเสริมให้เกิดการแข่งขันและเพิ่มประสิทธิภาพให้การจัดหาไฟฟ้าได้ วิทยานิพนธ์นี้จึงได้วิเคราะห์การคำนวณอัตราค่าไฟฟ้าด้วยวิธีที่สะท้อนถึงต้นทุนที่ชัดเจนมากขึ้น โดยพิจารณาถึงอัตราค่าไฟฟ้าแยกตามเขตพื้นที่เพื่อให้สอดคล้องกับต้นทุนของการไฟฟ้าแต่ละพื้นที่มากขึ้น และได้สร้างสมมติฐานให้มีการซื้อขายไฟฟ้าระหว่างประชาชนและบริษัทเอกชน เพื่อให้เกิดการแข่งขันในตลาดซื้อขายไฟฟ้า โดยจะวิเคราะห์ถึงผลกระทบต่ออัตราค่าไฟฟ้าที่การไฟฟ้าจะเรียกเก็บจากประชาชน พร้อมทั้งมีการกำหนดแนวทางกำกับดูแลอัตราค่าไฟฟ้าในกรณีที่มีบุคคลที่สามเข้ามาในตลาดให้มีความเหมาะสมมากยิ่งขึ้น


การปรับสภาพน้ำเสียปนเปื้อนน้ำมันปาล์มด้วยปฏิกิริยาเฟนตันเสมือนเพื่อเพิ่มประสิทธิภาพการผลิตก๊าซชีวภาพร่วมกับการใช้ตัวกลางถ่านชีวภาพจากกากกาแฟ, จุฬเชษฐ์ วุฒิวโรภาส Jan 2023

การปรับสภาพน้ำเสียปนเปื้อนน้ำมันปาล์มด้วยปฏิกิริยาเฟนตันเสมือนเพื่อเพิ่มประสิทธิภาพการผลิตก๊าซชีวภาพร่วมกับการใช้ตัวกลางถ่านชีวภาพจากกากกาแฟ, จุฬเชษฐ์ วุฒิวโรภาส

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้ศึกษาการปรับสภาพน้ำเสียปนเปื้อนน้ำมันใช้แล้วจากครัวเรือนด้วยปฏิกิริยาเฟนตัน โดยใช้ถ่านชีวภาพกากกาแฟเป็นตัวเร่งปฏิกิริยา เพื่อเพิ่มความสามารถในการย่อยสลายทางชีวภาพของน้ำมันก่อนจะนำเข้าสู่ระบบบำบัดทางชีวภาพแบบไร้อากาศเพื่อเพิ่มผลผลิตก๊าซชีวภาพ และปรับสภาพพื้นผิวของถ่านชีวภาพด้วยเหล็กแมกนีไทต์และแคลเซียมของกรดไขมันให้มีความเหมาะสมสำหรับปฏิกิริยาเฟนตันและเกิดการดูดซับน้ำมันเพื่อให้เกิดปฏิกิริยาบนพื้นผิวของถ่านชีวภาพ โดยใช้น้ำมันปาล์มเป็นตัวแทนของน้ำมันใช้แล้วในน้ำเสียครัวเรือน การทดลองแบ่งเป็น 3 ช่วง ได้แก่ การทดลองที่ 1 การทดลองการดูดซับน้ำมันของถ่านชีวภาพกากกาแฟที่มีขนาด 0.05-1.18 (S), 1.7-2.0 (M) และ >2.8 มม. (L) และอุณหภูมิในการเผา 300 (BC300) 500 (BC500) และ 700 (BC700) °ซ พบว่าถ่านชีวภาพชนิด BC300_L มีประสิทธิภาพในการดูดซับน้ำมันมากที่สุดที่ร้อยละ 73 โดยมีแนวโน้มที่จะดูดซับน้ำมันน้อยลงหากถ่านชีวภาพมีขนาดเล็กลง และจากการปรับสภาพถ่านชีวภาพด้วยเหล็กแมกนีไทต์ (BCF) และแคลเซียมของกรดไขมัน โดยศึกษาการติดกรดไขมันบนถ่านชีวภาพก่อน (BCFSCa) และหลัง (BCFCaS) การใส่แคลเซียม พบว่าถ่านชีวภาพทุกชนิดสามารถดูดซับน้ำมันได้เพิ่มขึ้นตามการเพิ่มขึ้นของปริมาณน้ำมันที่ใช้ในการทดลอง (5, 10 และ 15 ก./ล.) โดยประสิทธิภาพในการดูดซับน้ำมันของถ่านชีวภาพที่ผ่านและไม่ผ่านการปรับพื้นผิวมีความใกล้เคียงกัน การทดลองที่ 2 การปรับสภาพน้ำเสียปนเปื้อนน้ำมันปาล์มขั้นต้นด้วยปฏิกิริยาเฟนตัน พบว่าชุดการทดลองถ่านชีวภาพ BC และ BCF กลับตรวจพบค่า COD เพิ่มขึ้นเมื่อเพิ่มปริมาณไฮโดรเจนเปอร์ออกไซด์ในปฏิกิริยา และสูงกว่าค่า COD ตั้งต้นในชุดการทดลองส่วนใหญ่ ซึ่งมีแนวโน้มเกิดจากการออกซิไดซ์น้ำมันชีวภาพที่เกิดขึ้นจากการเผาถ่านชีวภาพ ในขณะที่ค่า COD ลดลงเมื่อเพิ่มปริมาณไฮโดรเจนเปอร์ออกไซด์ในชุดการทดลองถ่านชีวภาพ BCFSCa และ BCFCaS อาจเกิดจากแคลเซียมของกรดไขมันที่เคลือบอยู่บนพื้นผิวของถ่านชีวภาพช่วยลดการออกซิไดซ์น้ำมันชีวภาพที่เกิดขึ้น และพบว่าลำดับการติดกรดไขมันก่อนแคลเซียมทำให้ค่า COD ลดลงมากขึ้น หรือเกิดการออกซิไดซ์สารอินทรีย์ในระบบมากขึ้น การทดลองที่ 3 การทดลองบ่มก๊าซชีวภาพโดยจุลินทรีย์ไร้อากาศ โดยใช้น้ำเสียปนเปื้อนน้ำมันปาล์มที่ผ่านการบำบัดขั้นต้นด้วยกระบวนการเฟนตันร่วมกับการใช้ถ่านชีวภาพ พบว่าสัดส่วนถ่านชีวภาพต่อจุลินทรีย์ที่ 0.25 ก./ก. VSS สามารถผลิตก๊าซชีวภาพได้สูงที่สุด เมื่อเทียบกับที่ 0.75, 1.5 และ 2.5 ก./ก. VSS และจากการวิเคราะห์ค่า COD พบว่าถ่านชีวภาพขนาดเล็กสามารถลดค่า COD และผลิตก๊าซชีวภาพได้สูงกว่าถ่านชีวภาพขนาดใหญ่ เมื่อทำการบ่มจุลินทรีย์ไร้อากาศร่วมกับถ่านชีวภาพแต่ละชนิดที่ผ่านกระบวนการเฟนตัน พบว่าทุกชุดการทดลองที่ผ่านการปรับสภาพน้ำเสียสามารถผลิตก๊าซชีวภาพได้มากกว่าน้ำเสียปนเปื้อนน้ำมันที่ไม่ได้ผ่านการปรับสภาพ ถ่านชีวภาพ BCFCaS700 ที่ผ่านการปรับสภาพด้วยเฟนตันที่ไฮโดรเจนเปอร์ออกไซด์ …


การพัฒนาระบบนับเซลล์เม็ดเลือดขาวที่ผิดปกติผ่านสมาร์ทโฟน โดยใช้โครงข่ายประสาทเทียมชนิดคอนโวลูชัน, ณัทกร เกษมสำราญ Jan 2023

การพัฒนาระบบนับเซลล์เม็ดเลือดขาวที่ผิดปกติผ่านสมาร์ทโฟน โดยใช้โครงข่ายประสาทเทียมชนิดคอนโวลูชัน, ณัทกร เกษมสำราญ

Chulalongkorn University Theses and Dissertations (Chula ETD)

การวินิจฉัยโรคและการวิเคราะห์ความผิดปกติของผู้ป่วยที่เข้ารับการรักษาที่โรงพยาบาลและคลินิค จะต้องมีการตรวจร่างกาย สังเกตอาการ รวมถึงการซักประวัติผู้ป่วย ในบางครั้งแพทย์มีความจำเป็นต้องส่งตรวจทางห้องปฏิบัติการ เช่น การตรวจความสมบูรณ์ของเม็ดเลือด (CBC) ในอดีตแพทย์จะตรวจด้วยการส่องกล้องจุลทรรศ์ถือเป็นมาตรฐาน เนื่องจากในประเทศไทยผู้เชี่ยวชาญอายุรแพทย์โลหิตวิทยามีจำนวนน้อยเมื่อเทียบกับผู้ป่วยโรคเลือด ส่งผลให้คิวรอการนับเซลล์เม็ดเลือดของผู้ป่วยที่มีเซลล์ผิดปกติยาวนานหลายสัปดาห์ ได้มีการพัฒนาเครื่องนับเซลล์อย่างอัตโนมัติ เพื่อเพิ่มประสิทธิภาพการตรวจความสมบูรณ์ของเลือดได้อย่างรวดเร็วมากยิ่งขึ้น ลดภาระงานของผู้เชี่ยวชาญในการส่องกล้องจุลทรรศน์ลง แต่การนำเครื่องนับอย่างอัตโนมัติมาใช้ในโรงพยาบาลในประเทศไทยยังมีข้อจำกัด เนื่องจากราคาต่อเครื่องสูงจึงมีเฉพาะโรงเรียนแพทย์และโรงพยาบาลขนาดใหญ่ที่สามารถจัดซื้อได้ และมีความบกพร่องที่สำคัญเมื่อเลือดของผู้ป่วยมีเซลล์ที่มีความผิดปกติที่พบได้น้อยในภาวะปกติปะปนมา เครื่องอาจจะไม่สามารถตรวจจับเซลล์ดังกล่าวได้ จึงมีการสร้างเกณฑ์การส่งตรวจซ้ำด้วยการส่องกล้องจุลทรรศน์ เพื่อให้ผลการตรวจที่ได้มีความถูกต้องแม่นยำ จึงเกิดแนวคิดที่จะสร้างระบบอัตโนมัติในการจำแนกชนิดของเซลล์เลือดแบบ AI-Assisted web application ด้วยการให้ผู้ใช้สมาร์ทโฟนประกบกับเลนส์ใกล้ตาของกล้องจุลทรรศน์ถ่ายภาพส่งไปให้ระบบตรวจจับเซลล์เม็ดเลือดที่ผิดปกติได้ ซึ่งสามารถแยกเซลล์เม็ดเลือดได้ 12 ชนิด เมื่อระบบได้รับภาพแล้วจะนับเฉพาะเซลล์ดังกล่าวโดยปัญญาประดิษฐ์ที่มีโครงสร้างตาม YOLOv5x และส่งรายงานการนับให้ผู้ใช้ภายในไม่กี่วินาที หลังจากการปรับแต่งหนึ่งในรุ่นของแบบปัญญาประดิษฐ์ให้ค่า mAP@50 ที่ร้อยละ 90 บนชุดทดสอบ ยังพบว่าระบบที่พัฒนาขึ้นช่วยให้ความสามารถของแพทย์ทั่วไปและนักศึกษาแพทย์ชั้นคลินิค ในการระบุตำแหน่งและชนิดของเซลล์เม็ดเลือด ใกล้เคียงกับอาจารย์อายุรแพทย์โลหิตวิทยา และลดระยะเวลาการนับได้ครึ่งนึง


การพัฒนาวัสดุเพาะเลี้ยงเห็ดโคนญี่ปุ่นจากกากกาแฟ, พงศ์ปณต สาเรือง Jan 2023

การพัฒนาวัสดุเพาะเลี้ยงเห็ดโคนญี่ปุ่นจากกากกาแฟ, พงศ์ปณต สาเรือง

Chulalongkorn University Theses and Dissertations (Chula ETD)

การบริโภคกาแฟที่มีเพิ่มมากขึ้นก่อให้เกิดของเสียจากกาแฟเพิ่มมากขึ้นในแต่ละวัน กากกาแฟเป็นสิ่งที่ถูกนำมาหาทางใช้ประโยชน์ให้สูงสุดก่อนที่จะนำไปกำจัด ไม่ว่าจะเป็นปุ๋ยหรือใช้ในการดับกลิ่น การศึกษานี้จึงมีวัตถุประสงค์ที่จะศึกษาและพัฒนาการนำกากกาแฟมาเป็นวัสดุผสมในการเพาะเลี้ยงเห็ดโดยพัฒนาสูตรของวัสดุเพาะเลี้ยงให้เหมาะสมกับการเลี้ยงเห็ดโคนญี่ปุ่น Agrocybe Aegerita และตรวจสอบความสามารถในการเป็นปุ๋ยอินทรีย์ของวัสดุเพาะเลี้ยงเพื่อใช้ประโยชน์จากของเสียหลังการเพาะปลูกจนครบวงจร ผลการศึกษาพบว่าชุดการทดลองที่ใส่กากกาแฟลงในวัสดุเพาะ 20 เปอร์เซ็นต์ของน้ำหนักได้ค่าผลผลิตที่มากที่สุดที่ 20.42 (±1.01) กรัม/100กรัม และสอดคล้องกับค่าประสิทธิภาพการใช้วัสดุเพาะ 34.71(±3.49)% และมีอัตราส่วนของคาร์บอนต่อไนโตรเจนอยู่ที่ 85.14(±5.34) โดยการใส่กากกาแฟที่มากเกิน 65 เปอร์เซ็นต์ของน้ำหนักส่งผลยับยั้งการเจริญเติบโตของเส้นใยของเห็ด โดยผลผลิตอย่างดอกเห็ดสามารถดูดซึมคาเฟอีนที่อยู่ในวัสดุเพาะที่ผสมกับกากกาแฟได้ที่ 5.92(±0.34) nmol/mg และการศึกษาการใช้ประโยชน์เป็นปุ๋ยวัสดุเพาะหลังการเก็บเกี่ยว ไม่มีชุดการทดลองใดที่ผ่านเกณฑ์ของกรมการเกษตรในทุกพารามิเตอร์ โดยพบอัตราส่วนคาร์บอนต่อไนโตรเจนสูงเกิน ขาดค่าธาตุอาหารหลัก และค่าการย่อยสลายที่สมบูรณ์ที่ต่ำเกินไป และเมื่อนำไปผ่านกระบวนการหมักปุ๋ย ในชุดการทดลองที่การใส่วัสดุเพาะเห็ดผสมกับฟางข้าวและมูลสัตว์ สามารถปรับสภาพให้เหมาะสมต่อเกณฑ์มาตรฐานของกรมการเกษตรได้ ถ้าได้มีการนำไปเพาะพันธุ์พืชเพื่อหาความเหมาะสมต่อการใช้งาน จะสามารถนำปุ๋ยนี้ไปขยายผลและใช้งานได้อย่างเหมาะสมต่อไป


การจัดสรรฟังก์ชันระนาบผู้ใช้สำหรับสถานการณ์การสื่อสารเวลาแฝงต่ำและความน่าเชื่อถือสูงยิ่งในโครงข่าย 5g, พฤกษ์ สระศรีทอง Jan 2023

การจัดสรรฟังก์ชันระนาบผู้ใช้สำหรับสถานการณ์การสื่อสารเวลาแฝงต่ำและความน่าเชื่อถือสูงยิ่งในโครงข่าย 5g, พฤกษ์ สระศรีทอง

Chulalongkorn University Theses and Dissertations (Chula ETD)

วิทยานิพนธ์ฉบับนี้เสนอวิธีการคาดการณ์สำหรับการวางแผนการจัดสรรฟังก์ชันระนาบผู้ใช้ในโครงข่ายยุคที่ 5 ร่วมกับการประมวลผลขอบหลายการเข้าถึงในบริบทของการการสื่อสารยานพาหนะสู่ทุกสิ่งแบบเซลลูลาร์ที่มีความต้องการการสื่อสารที่มีความล่าช้าต่ำและรองรับการบริการแบบพลวัต การศึกษานี้ใช้เทคนิคการเรียนรู้เชิงลึกแบบเสริมแรงด้วยอัลกอริทึมโครงข่ายคิวเชิงลึกและตัวกระทำ-ตัวประเมินในการตัดสินใจเลือกตำแหน่งในการปรับใช้ฟังก์ชันระนาบผู้ใช้โดยอาศัยข้อมูลตำแหน่งและความเร็วของยานพาหนะ ผลการทดลองแสดงให้เห็นว่าทั้งสองอัลกอริทึมมีประสิทธิภาพใกล้เคียงกันในการลดความล่าช้าในการสื่อสาร โดยอัลกอริทึมตัวกระทำ-ตัวประเมินแสดงแนวโน้มในการปรับปรุงประสิทธิภาพเมื่อเพิ่มจำนวนการจำแนกประเภทยานพาหนะตามระดับความเร็ว นอกจากนี้ในอัลกอริทึมตัวกระทำ-ตัวประเมินยังมีความสามารถที่โดดเด่นในการทำงานแบบหลายตัวกระทำ ซึ่งมีศักยภาพในการจัดการฟังก์ชันระนาบผู้ใช้จำนวนมากในสภาพแวดล้อมโครงข่ายขนาดใหญ่และซับซ้อน การศึกษาเพิ่มเติมเกี่ยวกับประสิทธิภาพของอัลกอริทึมตัวกระทำ-ตัวประเมินแบบหลายตัวกระทำนี้แสดงให้เห็นถึงความสามารถในการจัดการฟังก์ชันระนาบผู้ใช้หลายตัวพร้อมกัน ส่งผลให้สามารถลดความล่าช้าในการสื่อสารได้อย่างมีประสิทธิภาพมากขึ้นตามจำนวนฟังก์ชันระนาบผู้ใช้ อีกทั้งยังแสดงให้เห็นถึงประสิทธิภาพที่โดดเด่นในด้านการประมวลผลที่รวดเร็วและอัตราการย้าย ฟังก์ชันระนาบผู้ใช้ต่ำทำให้สามารถรักษาเสถียรภาพของระบบได้


The Effect Of Oxygen Vacancies On The Catalytic Performance For The Ketonization Of Methyl Palmitate Into Palmitone, Mohammad Yazdanpanah Jan 2023

The Effect Of Oxygen Vacancies On The Catalytic Performance For The Ketonization Of Methyl Palmitate Into Palmitone, Mohammad Yazdanpanah

Chulalongkorn University Theses and Dissertations (Chula ETD)

The ketonization of bio-derived fatty acid methyl esters (FAMEs) into added-value products is an increasingly attractive process. However, the role of oxygen vacancies (Ov) in thermal catalytic performance and catalyst lattice oxygen loss has received less attention. This study investigated the relationship between Ov level, acid-base density, and catalytic performance in the ketonization reaction using TiOx catalysts with varying Ov levels prepared by a modified sol-gel method. Density functional theory (DFT) simulations showed that Ov creation increased interatomic distances, leading to the formation of frustrated Lewis pairs (FLPs). The density of acidic and basic sites increased proportionally with Ov concentration. …


Covalent Organic Frameworks Based On Aldehyde And Amine Linkers As Artificial Solid Electrolyte Interphase For Zinc Anode In Aqueous Electrolyte, Vipada Aupama Jan 2023

Covalent Organic Frameworks Based On Aldehyde And Amine Linkers As Artificial Solid Electrolyte Interphase For Zinc Anode In Aqueous Electrolyte, Vipada Aupama

Chulalongkorn University Theses and Dissertations (Chula ETD)

Aqueous Zinc-based batteries (AZBBs) are an alternative battery technology being developed for commercial use due to their advantages such as low cost, safety, and eco-friendliness compared to Lithium-based batteries (LBBs). However, despite these benefits, AZBBs face challenges on the zinc anode, including the formation of zinc dendrites and side reactions, which reduce the battery's stability and lifespan. Recently, many strategies have been investigated to address these issues, such as modifying the electrolyte, separator, and anode structure, and specially modifying the zinc surface. One particularly promising strategy involves using an Artificial Solid Electrolyte Interphase (ASEI) developed from a covalent organic framework …


Ambient And Elevated Temperature Performance Of Geopolymer Concrete Containing Rubber And Graphene Nanoplatelets, Hafiz Waheed Iqbal Jan 2023

Ambient And Elevated Temperature Performance Of Geopolymer Concrete Containing Rubber And Graphene Nanoplatelets, Hafiz Waheed Iqbal

Chulalongkorn University Theses and Dissertations (Chula ETD)

Geopolymer concrete (GPC) is recognized as a promising alternative to conventional cement concrete due to its environmental sustainability properties. In this research work, crumb rubber (CR) was used to partially replace fine aggregate to reduce rubber waste, and graphene nanoplatelets (GNPs) were used as a nanomaterial to enhance the properties of GPC. Total 20 mix designs of fly ash-based GPC were made having 10% to 30% replacement of fine aggregate with CR and addition of 0.1% to 0.4% of GNPs as of binder percentage. The main objective of this research work is to assess the properties of these mix designs …


การเคลื่อนที่ของตะกอนในแม่น้ำสายหลักของลุ่มน้ำเจ้าพระยาตอนบน, เมธาฤทธิ์ แนมสัย Jan 2023

การเคลื่อนที่ของตะกอนในแม่น้ำสายหลักของลุ่มน้ำเจ้าพระยาตอนบน, เมธาฤทธิ์ แนมสัย

Chulalongkorn University Theses and Dissertations (Chula ETD)

การวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาการเคลื่อนที่ของตะกอน ในแม่น้ำสายหลักของลุ่มน้ำเจ้าพระยาตอนบน ประกอบด้วย แม่น้ำปิง วัง ยม และน่าน ในการศึกษาได้ใช้ข้อมูลอุทกวิทยาย้อนหลัง ตั้งแต่ปี 2464 ถึง 2562 และข้อมูลสำรวจการไหลของน้ำและตะกอนในปี 2561 และ 2562 การวิเคราะห์การเคลื่อนที่ของตะกอนในแม่น้ำแต่ละสายได้ใช้วิธีการทางสถิติทั่วไป วิธี Mann-Kendall (MK) และวิธีโค้งทับทวี (DMC) ผลการศึกษา พบว่า ปริมาณตะกอนรายปีเฉลี่ยที่สถานีอุทกวิทยาใกล้ทางออกลุ่มน้ำของแม่น้ำปิง (สถานี P.17) วัง (สถานี W.4A) ยม (สถานี Y.16) และน่าน (สถานี N.67) ประมาณ 0.82, 0.26, 0.35 และ 1.88 ล้านตัน/ปี ตามลำดับ โดยการเคลื่อนที่ของตะกอนในแม่น้ำทั้ง 4 สาย ส่วนใหญ่เคลื่อนที่ในลักษณะแขวนลอยเป็นหลัก ยกเว้นแม่น้ำปิงด้านท้ายน้ำของเขื่อนภูมิพลที่เคลื่อนที่เป็นตะกอนท้องน้ำ ผลการศึกษาความผันแปรในเชิงเวลาของปริมาณตะกอนรายปี พบว่า หลายสถานีมีแนวโน้มลดลง ได้แก่ สถานี P.1 ของแม่น้ำปิง สถานี W.16A, W.1C และ W.23 ของแม่น้ำวัง สถานี N.5A, N.7A, N.8A และ N.67 ของแม่น้ำน่าน และแม่น้ำเจ้าพระยา ที่สถานี C.2 ในทางกลับกันที่สถานี Y.1C และ Y.16 ของแม่น้ำยมกลับมีแนวโน้มเพิ่มขึ้น ส่วนผลการศึกษาความผันแปรของปริมาณตะกอนในเชิงตำแหน่ง แสดงให้เห็นว่า ปริมาณตะกอนรายปีเฉลี่ยเพิ่มขึ้นตามระยะทางจากต้นน้ำไปยังท้ายน้ำ อย่างไรก็ตามปริมาณตะกอนในแม่น้ำยมและแม่น้ำวังมีการลดลงในแม่น้ำตอนล่างใกล้ทางออกของลุ่มน้ำ ผลการศึกษายังพบว่าการก่อสร้างเขื่อนภูมิพล กิ่วลม แม่จาง กิ่วคอหมา และฝายแม่ยม ไม่ได้ส่งผลอย่างมีนัยสำคัญต่อปริมาณตะกอนในแม่น้ำใกล้ทางออกลุ่มน้ำของแม่น้ำปิง วัง และยม ในขณะที่ใกล้ทางออกลุ่มน้ำของแม่น้ำน่านมีปริมาณตะกอนเพิ่มขึ้นหลังจากการก่อสร้างเขื่อนสิริกิติ์ แต่ปริมาณตะกอนกลับลดลงหลังจากการก่อสร้างเขื่อนทดน้ำนเรศวรและเขื่อนแควน้อยบำรุงแดน นอกจากนี้ยังพบว่า ปริมาณตะกอนที่สถานี C.2 หลังจากการสร้างอาคารชลศาสตร์ขนาดใหญ่ทั้ง 8 แห่ง ลดลงเพียง 31 เปอร์เซ็นต์ของปริมาณตะกอนก่อนก่อสร้างเขื่อนภูมิพล …


Single Spring Gravity Compensator For A Multi Degree Of Freedom Manipulator Arm, Krittanai Sajjapongse Jan 2023

Single Spring Gravity Compensator For A Multi Degree Of Freedom Manipulator Arm, Krittanai Sajjapongse

Chulalongkorn University Theses and Dissertations (Chula ETD)

Designing industrial robots requires utmost attention to power consumption and safety, especially in today's environment where humans work closely with robots. However, due to their robust and weighty structures, most robotic manipulators are typically engineered with high-power systems to handle payloads and counteract gravity. This research develops a novel gravity compensator system that employs a single spring to counterbalance a multi-DOF manipulator. This system combines cam follower systems with a square root mechanism. We provide a general equation that applies to multiple degrees of freedom. Additionally, we designed and built a 3-DOF manipulator prototype. The experiment shows that our gravity …


Reactor Design By Integrating Absorption And Photocatalytic Oxidation Processes For Volatile Organic Compound (Voc) Removal From Polluted Gas Stream Of Storage Facilities In Petrochemical Industry, Phaly Ham Jan 2023

Reactor Design By Integrating Absorption And Photocatalytic Oxidation Processes For Volatile Organic Compound (Voc) Removal From Polluted Gas Stream Of Storage Facilities In Petrochemical Industry, Phaly Ham

Chulalongkorn University Theses and Dissertations (Chula ETD)

Even petrochemical industry plays an important role in meeting the global energy demand, it is also responsible for emitting significant amounts of Volatile Organic Compounds (VOCs), which pose serious environmental and health hazards. In this thesis, we propose an innovative approach to address this issue by designing a multifunctional reactor that integrates absorption and photocatalytic oxidation processes for the removal of VOC from polluted gas streams of storage facilities, during loading, discharging, and cleaning process. This research encompasses four scopes (i) Comparative study of gas-liquid contactors: Bubble Column Reactor (BCR) and internal-loop Airlift Reactor (IL-ALR). The relative effect of reactor’s …


ผลตอบสนองเชิงโครงสร้างของอุโมงค์รถไฟฟ้าใต้ดินที่มีพื้นผิวสัมผัสเพลิงไหม้แตกต่างกัน, วศิน จันทร์ทอง Jan 2023

ผลตอบสนองเชิงโครงสร้างของอุโมงค์รถไฟฟ้าใต้ดินที่มีพื้นผิวสัมผัสเพลิงไหม้แตกต่างกัน, วศิน จันทร์ทอง

Chulalongkorn University Theses and Dissertations (Chula ETD)

การออกแบบอุโมงค์ในภาวะเพลิงไหม้โดยส่วนใหญ่พิจารณาให้พื้นผิวด้านในของอุโมงค์สัมผัสเพลิงไหม้ตลอดแนวเส้นรอบรูป อย่างไรก็ตาม ในการเกิดเพลิงไหม้จริง พื้นผิวของอุโมงค์อาจได้รับผลกระทบจากความร้อนเพียงบางส่วน เนื่องจากลักษณะของเพลิงไหม้ที่เกิดขึ้นหรือการติดตั้งอุปกรณ์อื่นๆ เพิ่มเติมภายในอุโมงค์ ส่งผลให้ผลตอบสนองเชิงโครงสร้างของอุโมงค์แตกต่างไป งานวิจัยนี้ศึกษาผลตอบสนองเชิงโครงสร้างของอุโมงค์รถไฟฟ้าใต้ดินที่มีรูปแบบของพื้นผิวสัมผัสเพลิงไหม้ที่แตกต่างกัน 4 กรณีศึกษา ได้แก่ กรณีที่ 1 พื้นผิวสัมผัสเพลิงไหม้ตลอดแนวเส้นรอบรูปด้านในของอุโมงค์ กรณีที่ 2 พื้นผิวสัมผัสเพลิงไหม้เหนือระดับรางรถไฟ กรณีที่ 3 พื้นผิวสัมผัสเพลิงไหม้เหนือระดับกึ่งกลางความสูงของอุโมงค์ และ กรณีที่ 4 พื้นผิวสัมผัสเพลิงไหม้เหนือระดับรางรถไฟเว้นทางเดินด้านข้างอุโมงค์ โดยประยุกต์ใช้ระเบียบวิธีไฟไนต์เอลิเมนต์ในการวิเคราะห์การถ่ายโอนความร้อนและการวิเคราะห์โครงสร้าง รวมทั้งนำเสนอตัวคูณลดค่าความต้านทานวิกฤติสำหรับแผนภาพปฏิสัมพันธ์ระหว่างความต้านทานโมเมนต์ดัดกับความต้านทานแรงตามแนวแกนเพื่อพิจารณากรณีเพลิงไหม้ที่เลวร้ายที่สุด ผลการศึกษาชี้ให้เห็นความแตกต่างของผลตอบสนองเชิงโครงสร้างอุโมงค์ภายใต้รูปแบบเพลิงไหม้ที่แตกต่างกัน โดยกรณีศึกษาที่ 3 เป็นรูปแบบเพลิงไหม้ที่เลวร้ายที่สุด ซึ่งยืนยันจากการวิเคราะห์รูปแบบเพลิงไหม้เพิ่มเติมอีก 6 กรณีศึกษาที่อ้างอิงจากรูปแบบเพลิงไหม้ในกรณีศึกษาที่ 3 ด้วยการเพิ่มและลดส่วนของพื้นผิวด้านในอุโมงค์ที่สัมผัสเพลิงไหม้อีก 15o 30o และ 45o จากแนวกึ่งกลางความสูงของอุโมงค์ทั้งฝั่งซ้ายและฝั่งขวา ผลจากการศึกษานี้สามารถใช้เป็นแนวทางเบื้องต้นสำหรับการพิจารณารูปแบบเพลิงไหม้สำหรับการออกแบบโครงสร้างอุโมงค์รถไฟฟ้าใต้ดินต่อไป


Effect Of Retarders On Geopolymerization Process Of Fly Ash-Based Geopolymer, Naritsara Toobpeng Jan 2023

Effect Of Retarders On Geopolymerization Process Of Fly Ash-Based Geopolymer, Naritsara Toobpeng

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study aims to investigate the effect of additives on the geopolymerization of the fly ash-based geopolymer. The ratios of sodium silicate and sodium hydroxide (S/NX and solid FA to activator (F/L) were observed by varying the S/N at 1.0-2.5 wt.% and the F/L at 0.5-3.3 wt%. Results demonstrated that the highest strength was given by the S/N and F/L at 1.0 and 2.0, respectively. These ratios were used to study the effect of fourteen additives of the setting times of geopolymer pastes. Each additive was incorporated into the pastes by two mixing methods including wet and dry-mixing. The pastes …


3d Printing Of Hydroxyapatite/Polyhydroxyalkanoate-Based Composites, Warrayut Kanabenja Jan 2023

3d Printing Of Hydroxyapatite/Polyhydroxyalkanoate-Based Composites, Warrayut Kanabenja

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis focuses on developing bio-based 3D printing feedstocks for biomedical applications, such as bone scaffolds and soft tissue. However, their utility is limited by a narrow processing window which challenges manipulating filament size. These issues result in discontinuous flow and incomplete deposition of melted PHB. In part one, PHB and PHBV were blended with PLA and PBAT to enhance their processability and printability. The polymer blends exhibited lower crystallization temperature and degree of crystallinity. Assessing their 3D printability, neat PHB and PHBV filaments experienced, poor flow during extrudate deposition, and significant warping, leading to 3D printing failures. The blends …


Cohort Comfort Models — Using Occupant’S Similarity To Predict Personal Thermal Preference With Less Data, Matias Quintana, Stefano Schiavon, Federico Tartarini, Joyce Kim, Clayton Miller Jan 2023

Cohort Comfort Models — Using Occupant’S Similarity To Predict Personal Thermal Preference With Less Data, Matias Quintana, Stefano Schiavon, Federico Tartarini, Joyce Kim, Clayton Miller

Research Collection College of Integrative Studies

Cohort Comfort Models (CCM) are introduced as a technique for creating a personalized thermal prediction for a new building occupant without the need to collect large amounts of individual comfort-related data. This approach leverages historical data collected from a sample population, who have some underlying preference similarity to the new occupant. The method uses background information such as physical and demographic characteristics and one-time onboarding surveys (satisfaction with life scale, highly sensitive person scale, personality traits) from the new occupant, as well as physiological and environmental sensor measurements paired with a few thermal preference responses. The framework was implemented using …


Toward Inclusive Online Environments: Counterfactual-Inspired Xai For Detecting And Interpreting Hateful And Offensive Tweets, Muhammad Deedahwar Mazhar Qureshi, Muhammad Atif Qureshi, Wael Rashwan Jan 2023

Toward Inclusive Online Environments: Counterfactual-Inspired Xai For Detecting And Interpreting Hateful And Offensive Tweets, Muhammad Deedahwar Mazhar Qureshi, Muhammad Atif Qureshi, Wael Rashwan

Articles

The prevalence of hate speech and offensive language on social media platforms such as Twitter has significant consequences, ranging from psychological harm to the polarization of societies. Consequently, social media companies have implemented content moderation measures to curb harmful or discriminatory language. However, a lack of consistency and transparency hinders their ability to achieve desired outcomes. This article evaluates various ML models, including an ensemble, Explainable Boosting Machine (EBM), and Linear Support Vector Classifier (SVC), on a public dataset of 24,792 tweets by T. Davidson, categorizing tweets into three classes: hate, offensive, and neither. The top-performing model achieves a weighted …


Evaluation Of Nanoclay Additives For Improving Resistance To Moisture Damage In Hot Mix Asphalt (Hma), Amro El Badawy, Ashraf Rahim Jan 2023

Evaluation Of Nanoclay Additives For Improving Resistance To Moisture Damage In Hot Mix Asphalt (Hma), Amro El Badawy, Ashraf Rahim

Mineta Transportation Institute

Transportation has an enormous impact on the U.S. economy and on the lives of all Americans. Many modes of transportation rely on pavement, but pavement conditions deteriorate over time because of the combined effects of traffic and climate. Exposure to moisture often causes premature failure of asphalt pavements as it reduces the stiffness of the asphalt and enables stripping of the asphalt from the aggregate. This research evaluates the effectiveness of clay nanomaterials (i.e., nanoclays) in improving the resistance of hot mix asphalt (HMA) to moisture damage and compares the enhancement results to anti-stripping additives commonly used in pavement construction. …


Elevation-Distributed Multistage Reverse Osmosis Desalination With Seawater Pumped Storage, Hani E. Elsayed-Ali Jan 2023

Elevation-Distributed Multistage Reverse Osmosis Desalination With Seawater Pumped Storage, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

A seawater reverse osmosis (RO) plant layout based on multistage RO with stages located at different elevations above sea level is described. The plant uses the weight of a seawater column from pumped storage as head pressure for RO (gravity-driven multistage RO) or to supplement high-pressure pumps used in RO (gravity-assisted multistage RO). The use of gravitational force reduces the specific energy for RO compared to using high-pressure pumps. By locating the RO stages at different elevations based on demand sites, the total specific energy consumption for RO and permeate transport to different elevations above sea level is reduced from …


View Synthesis With Scene Recognition For Cross-View Image Localization, Uddom Lee, Peng Jiang, Hongyi Wu, Chunsheng Xin Jan 2023

View Synthesis With Scene Recognition For Cross-View Image Localization, Uddom Lee, Peng Jiang, Hongyi Wu, Chunsheng Xin

Electrical & Computer Engineering Faculty Publications

Image-based localization has been widely used for autonomous vehicles, robotics, augmented reality, etc., and this is carried out by matching a query image taken from a cell phone or vehicle dashcam to a large scale of geo-tagged reference images, such as satellite/aerial images or Google Street Views. However, the problem remains challenging due to the inconsistency between the query images and the large-scale reference datasets regarding various light and weather conditions. To tackle this issue, this work proposes a novel view synthesis framework equipped with deep generative models, which can merge the unique features from the outdated reference dataset with …


Security Of Internet Of Things (Iot) Using Federated Learning And Deep Learning — Recent Advancements, Issues And Prospects, Vinay Gugueoth, Sunitha Safavat, Sachin Shetty Jan 2023

Security Of Internet Of Things (Iot) Using Federated Learning And Deep Learning — Recent Advancements, Issues And Prospects, Vinay Gugueoth, Sunitha Safavat, Sachin Shetty

Electrical & Computer Engineering Faculty Publications

There is a great demand for an efficient security framework which can secure IoT systems from potential adversarial attacks. However, it is challenging to design a suitable security model for IoT considering the dynamic and distributed nature of IoT. This motivates the researchers to focus more on investigating the role of machine learning (ML) in the designing of security models. A brief analysis of different ML algorithms for IoT security is discussed along with the advantages and limitations of ML algorithms. Existing studies state that ML algorithms suffer from the problem of high computational overhead and risk of privacy leakage. …


Opioid Use Disorder Prediction Using Machine Learning Of Fmri Data, A. Temtam, Liangsuo Ma, F. Gerard Moeller, M. S. Sadique, K. M. Iftekharuddin, Khan M. Iftekharuddin (Ed.), Weijie Chen (Ed.) Jan 2023

Opioid Use Disorder Prediction Using Machine Learning Of Fmri Data, A. Temtam, Liangsuo Ma, F. Gerard Moeller, M. S. Sadique, K. M. Iftekharuddin, Khan M. Iftekharuddin (Ed.), Weijie Chen (Ed.)

Electrical & Computer Engineering Faculty Publications

According to the Centers for Disease Control and Prevention (CDC) more than 932,000 people in the US have died since 1999 from a drug overdose. Just about 75% of drug overdose deaths in 2020 involved Opioid, which suggests that the US is in an Opioid overdose epidemic. Identifying individuals likely to develop Opioid use disorder (OUD) can help public health in planning effective prevention, intervention, drug overdose and recovery policies. Further, a better understanding of prediction of overdose leading to the neurobiology of OUD may lead to new therapeutics. In recent years, very limited work has been done using statistical …


Ict Security Tools And Techniques Among Higher Education Institutions: A Critical Review, Miko Nuñez, Xavier-Lewis Palmer, Lucas Potter, Chris Jordan Aliac, Lemuel Clark Velasco Jan 2023

Ict Security Tools And Techniques Among Higher Education Institutions: A Critical Review, Miko Nuñez, Xavier-Lewis Palmer, Lucas Potter, Chris Jordan Aliac, Lemuel Clark Velasco

Electrical & Computer Engineering Faculty Publications

Higher education institutions (HEIs) are increasingly relying on digital technologies for classroom and organizational management, but this puts them at higher risk for information and communication (ICT security attacks. Recent studies show that HEIs have experienced more security breaches in ICT security composed of both cybersecurity an information security. A literature review was conducted to identify common ICT security practices in HEIs over the last decade. 11 journal articles were profiled and analyzed, revealing threats to HEIs’ security and protective measures in terms of organizational security, technological security, physical security, and standards and frameworks. Security tools and techniques were grouped …


Special Section Editorial: Artificial Intelligence For Medical Imaging In Clinical Practice, Claudia Mello-Thoms, Karen Drukker, Sian Taylor-Phillips, Khan Iftekharuddin, Marios Gavrielides Jan 2023

Special Section Editorial: Artificial Intelligence For Medical Imaging In Clinical Practice, Claudia Mello-Thoms, Karen Drukker, Sian Taylor-Phillips, Khan Iftekharuddin, Marios Gavrielides

Electrical & Computer Engineering Faculty Publications

This editorial introduces the JMI Special Section on Artificial Intelligence for Medical Imaging in Clinical Practice.


On The Chronological Understanding Of The Homogeneous Dielectric Barrier Discharge, Xinpei Lu, Zhi Fang, Dong Dai, Tao Shao, Feng Liu, Cheng Zhang, Dawei Liu, Chunqi Jiang Jan 2023

On The Chronological Understanding Of The Homogeneous Dielectric Barrier Discharge, Xinpei Lu, Zhi Fang, Dong Dai, Tao Shao, Feng Liu, Cheng Zhang, Dawei Liu, Chunqi Jiang

Electrical & Computer Engineering Faculty Publications

Dielectric barrier discharges (DBD) are widely utilised non-equilibrium atmospheric pressure plasmas with a diverse range of applications, such as material processing, surface treatment, light sources, pollution control, and medicine. Over the course of several decades, extensive research has been dedicated to the generation of homogeneous DBD (H-DBD), focussing on understanding the transition from H-DBD to filamentary DBD and exploring strategies to create and sustain H-DBD. This paper first discusses the influence of various parameters on DBD, including gas flow, dielectric material, surface conductivity, and mesh electrode. Secondly, a chronological literature review is presented, highlighting the development of H-DBD and the …


An Adaptive Image Restoration Algorithm Based On Hybrid Total Variation Regularization, Cong Thang Pham, Thi Thu Thao Tran, Hung Vi Dang, Hoai Phuong Dang Jan 2023

An Adaptive Image Restoration Algorithm Based On Hybrid Total Variation Regularization, Cong Thang Pham, Thi Thu Thao Tran, Hung Vi Dang, Hoai Phuong Dang

Turkish Journal of Electrical Engineering and Computer Sciences

In imaging systems, the mixed Poisson-Gaussian noise (MPGN) model can accurately describe the noise present. Total variation (TV) regularization-based methods have been widely utilized for Poisson-Gaussian removal with edge-preserving. However, TV regularization sometimes causes staircase artifacts with piecewise constants. To overcome this issue, we propose a new model in which the regularization term is represented by a combination of total variation and high-order total variation. We study the existence and uniqueness of the minimizer for the considered model. Numerically, the minimization problem can be efficiently solved by the alternating minimization method. Furthermore, we give rigorous convergence analyses of our algorithm. …