Engineering Commons^™

Optimizing The Placement Of Multiple Uav--Lidar Units Under Road Priority And Resolution Requirements, Zachary Michael Osterwisch

Masters Theses

"Real-time road traffic information is crucial for intelligent transportation systems (ITS) applications, like traffic navigation or emergency response management, but acquiring such data is tremendously challenging in practice because of the high costs and inefficient placement of sensors. Some modern ITS applications contribute to this problem by equipping vehicles with multiple light detection and ranging (LiDAR) sensors, which are expensive and gather data inefficiently; one solution that avoids vehicle-mounted LiDAR acquisition has been to install elevated LiDAR instruments along roadways, but this approach remains unrefined. The eventual development of sixth-generation (6G) wireless communication will enable new, creative solutions to solve …

Tailoring A System Engineering And Management Plan For A University Satellite Team, Jacob D. Anderson

Masters Theses

"A Systems Engineering and Management Plan (SEMP) helps enable a successful engineering project or team. All university teams working on satellite development encounter similar obstacles that are not commonly seen in industry. As a result, university teams must determine new approaches to solve these unique and difficult problems. A SEMP can mitigate risks, solve problems, and provide streamlined solutions. A modified SEMP is proposed along with guidance for implementing it into a new team and an existing team.

The adopted SEMP provides a road map for the technical execution and program management of a university team. The SEMP should be …

Rapid-Throughput Analysis Of 1,4-Dioxane In Plants By Centrifugal Sampling And Phytoforensic Analysis For Site Delineation And Assessing Enhanced Rhizodegradation, Anthony Eberechukwu Oha

Masters Theses

"Owing to its broad use and environmental persistence, 1,4-dioxane (dioxane) poses a notable threat to public health and is recalcitrant to traditional remedial systems. Dioxane moves readily in an aqueous environment and is an emerging contaminant in drinking water, surface water, groundwater, and wastewater. The extent of dioxane in the biosphere is also difficult to delineate, particularly in the subsurface. Phytoremediation has demonstrated the potential for dioxane groundwater remediation. Recent findings indicate that plant-microbial symbiosis may be more advantageous for limiting potential transport and transfer into plant tissues and the atmosphere. Bioaugmentation of the rhizosphere paired with soil amendments has …

Selecting Consolidation Procedures For Making Concrete Specimens, Paige Marie Toebben

Masters Theses

"The goal of this research was to reevaluate ASTM C31 Standard Practice for Making and Curing Concrete Test Specimens in the Field, as well as deepen our understanding of the relationship between the consolidation process, concrete composition, and workability. An improved understanding of this area will help to reduce variability in concrete quality. The project involved evaluating the effect of different consolidation methods on concrete specimens with changing levels of workability. To do this, concrete cylinders were created with varying viscosities by adjusting the water-to-cement ratio (w/c) and water-reducing agent. More cylinders were created with varying paste volumes while keeping …

Static I-V Curve And Aging Test For Pim Characterization In Metallic Contacts, Kalkidan Anjajo

Masters Theses

"Spring clips and fabric-over-foams (FOFs) are widely used in mobile devices for electrical connection purposes. However, the imperfect metallic connections tend to induce passive intermodulation (PIM), resulting in a receiver sensitivity degradation, known as RF desensitization. Due to the complexity of the PIM characterization, there is not yet a way to evaluate PIM performance using a simple setup for environments like factories. In this study, a current-voltage (I-V) behavior-based PIM evaluation method is proposed and validated with various metallic contacts and contact forces. The test results demonstrated the feasibility of the PIM performance evaluation based on the measured static I-V …

Early Liver Disease Diagnosis Using Grey Wolf Optimization Algorithm, Abrar Rizk M. Khedr, Ahmed I. Saleh, Ahmed S. Samra, Eman Abdelhalim

Mansoura Engineering Journal

Every year, millions of people around the world experience health issues due to liver disease, and It is also being a major global cause of mortality. A variety of factors, such as obesity and hepatitis infection, can harm the liver and contribute to these disorders. However, diagnosis of chronic liver disease is often an expensive and complex process, and early detection of liver disease poses challenges because of its elusive symptoms that can often lead to delayed diagnosis. We employed machine learning for this study, to anticipate individuals with liver diseases before symptoms appear. To attain the best accuracy, we …

Cfd Analysis For Beyond Bubbly Gas-Liquid Two-Phase Flows In A Large Diameter Pipe, Sungje Hong

Doctoral Dissertations

"Due to the complexity of multiphase flow phenomena, numerical analysis for multiphase turbulent flow is not as reliable as single-phase computational fluid dynamics (CFD). A literature review has revealed that the current efforts on multiphase flow simulation have focused on small diameter channels under very restricted flow conditions and have been conducted without identifying some important procedures. To expand CFD applications to a wide range of two-phase flow conditions in large diameter channels, this study aims to validate the current CFD models for vertical concurrent air-water two-phase flow simulations beyond bubbly flows. First, a numerical model developed to describe dynamical …

Development Of A Mission Design Tool For Computing Libration Point Formations Using Differential Corrections Initialized With A Genetic Algorithm, Donna Jennings

Doctoral Dissertations

"The growing interest in deep space spacecraft missions and distributed spacecraft formations has established the need for state-of-the-art advancements in the areas of relative dynamics and mission design. The focus of this research is to develop methods for identifying natural (i.e. ballistic) relative formation trajectories in the vicinity of the collinear libration points. A natural formation decreases the station keeping costs, lowering the consumption of spacecraft resources and extending mission lifetime. This research adapts both numerical and machine learning approaches to the problem of mission design. A genetic algorithm was first used to identify a multi-agent spacecraft formation in the …

Drainage And Sedimentary Response Of The Northern Andes And The Pebas System To Miocene Strike-Slip Tectonics: A Source To Sink Study Of The Magdalena Basin, S. Zapata, L. Calderon-Diaz, C. Jaramillo, Francisca Oboh-Ikuenobe, J. C. Piedrahita, M. Rodríguez-Cuevas, A. Cardona, E. R. Sobel, M. Parra, V. Valencia, A. Patiño, J. S. Jaramillo-Rios, M. Flores, J. Glodny

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Miocene strike-slip tectonics was responsible for creating and closing short-lived (ca. 6 Ma) passages and the emergence of isolated topography in the Northern Andes. These geological events likely influenced the migration and/or isolation of biological populations. To better understand the paleogeography of the Miocene hinterland and foreland regions in the Northern Andes, we conducted a source-to-sink approach in the Magdalena Basin. This basin is located between the Central and Eastern Cordilleras of Colombia and contains an ample Miocene record, which includes Lower Miocene fine-grained strata and Middle Miocene to Pliocene coarsening-up strata. Our study presents a new data set that …

Pinch Force Generation During Scaling By Dental Professionals: A Systematic Review, Jessica R. Suedbeck, Emily A. Ludwig

Dental Hygiene Faculty Publications

Objective

The objective of this review was to examine the impact of instrument designs on pinch force generation during scaling by dental professionals.

Methods

Three databases were utilized from September 2019 to November 2021 in addition to hand-searching specific journals and reference lists. Research articles that examined pinch force generation in dental professionals during scaling with manual instruments only were included. Bias was assessed in the individual articles.

Results

Six research articles were included with sample populations that varied from 12 to 24 participants. Four articles evaluated instrument designs in relation to pinch force generation during scaling by dental professionals. …

Peer Reviewer Training To Build Capacity In Engineering Education Research, Kelsey Watts, Randi Sims, Evan Ko, Karin Jensen, Rebecca Bates, Gary Lichtenstein, Lisa Benson

Integrated Engineering Department Publications

The Engineering Education Research (EER) Peer Review Training (PERT) project aimed to develop EER scholars’ peer review skills through mentored experiences reviewing journal manuscripts. Concurrently, the project explored how EER scholars develop capabilities for evaluating and conducting EER scholarship through peer reviewing. PERT used a mentoring structure in which two researchers with little reviewing experience were paired with an experienced mentor to complete three manuscript reviews collaboratively. Using a variety of techniques including think aloud protocols, structured peer reviews, and exit surveys, the PERT research team addressed the following research questions: (1) To what extent are the ways in which …

Assessing The Predictive Capability Of The Nno Ballistic Limit Equation For Low-Density Projectile Impact, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The design of nearly all Earth-orbiting spacecraft includes some sort of added shielding that protects the spacecraft against impacts by meteoroids and orbital debris. The effectiveness of the shielding is typically assessed using ballistic limit equations (BLEs) that are developed using data from high-speed impact tests on key spacecraft components and elements. These equations predict whether or not a particular system or structural element will sustain a critical failure following a specific impact event. As such, they are essential components of spacecraft system design as well as any quantitative spacecraft risk assessments that may need to be performed as part …

Densifying Hydration Products Of Alite By A Bio-Inspired Admixture, Yi Fang, Jialai Wang, Liang Wang, Xin Qian, Xiaodong Wang, Wenyu Liao, Peiyuan Chen, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A bio-inspired, plant-derived polyphenol, tannic acid (TA) was identified as a renewable admixture to improve the compressive strength of concretes. Aiming to understand the underlying mechanism responsible for this strength improvement, this study examines how TA mediates the hydration of tricalcium silicate (alite). Experimental study shows that TA can form complex with calcium ions through chelating, retarding the hydration of the alite and changing of the hydration products. Particularly, X-ray diffraction analysis shows that TA makes calcium hydroxide preferentially grow on the [0 0 1] face. Fourier-transform infrared spectroscopy and 29Si MAS NMR results reveal that the mean chain length …

3d-Printed Hydrogels Dressings With Bioactive Borate Glass For Continuous Hydration And Treatment Of Second-Degree Burns, Fateme Fayyazbakhsh, Michael J. Khayat, Candy Sadler, Delbert Day, Yue-Wern Huang, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Recent advances in additive manufacturing have led to the development of innovative solutions for tissue regeneration. Hydrogel materials have gained significant attention for burn wound treatment in clinical practice among various advanced dressings due to their soothing and moisturizing activity. However, prolonged healing, pain, and traumatic removal due to the lack of long-term wound hydration are some of the challenges in the treatment of second-degree burn wounds. In this study, 3D-printed dressings were fabricated using gelatin, alginate, and bioactive borate glass (BBG) using an extrusion-based bioprinter. After ionic crosslinking, the 3D-printed dressings were characterized for mechanical properties, degradation rate, hydration …

Study Of Legionella Pneumophila Treatment With Copper In Drinking Water By Single Cell-Icp-Ms, Lei Xu, Austin Sigler, Anna Chernatynskaya, Lindsey Rasmussen, Jingrang Lu, Endalkachew Sahle-Demessie, David J. Westenberg, Hu Yang, Honglan Shi

Biological Sciences Faculty Research & Creative Works

Legionella pneumophila is a persistent opportunistic pathogen that poses a significant threat to domestic water systems. Previous studies suggest that copper (Cu) is an effective antimicrobial in water systems. A rapid and sensitive quantification method is desired to optimize the conditions of L. pneumophila treatment by Cu and to better understand the interaction mechanisms between Cu and cells. In this study, we developed a highly sensitive single cell (SC)-ICP-MS method to monitor L. pneumophila cell concentration and track their uptake of Cu. The SC-ICP-MS method showed excellent sensitivity (with a cell concentration detection limit of 1000 cells/mL), accuracy (good agreement …

Cyberphysical Systems And Energy: A Discussion With Reference To An Enhanced Geothermal Process, Keshav Kasturi Rangan, Henrique Oyama, Ilham Azali Assoumani, Helen Durand, K.Y. Simon Ng

Chemical Engineering and Materials Science Faculty Research Publications

As cyberphysical systems research advances, energy systems will be able to benefit from the developments. In this section, we discuss several points in two newer areas for cyberphysical systems research in chemical engineering: 1) cybersecurity of process control systems; and 2) quantum computation of control actions. The discussion is presented in a general manner, with relevance to flow systems or under traditional control laws (e.g., proportional control). However, to showcase energy systems relevance, we will provide links, at intervals, between the developments discussed and enhanced geothermal systems with energy production through the Organic Rankine Cycle (ORC).

Quantum Computing And Its Applications In Healthcare, Vu Giang

OUR Journal: ODU Undergraduate Research Journal

This paper serves as a review of the state of quantum computing and its application in healthcare. The various avenues for how quantum computing can be applied to healthcare is discussed here along with the conversation about the limitations of the technology. With more and more efforts put into the development of these computers, its future is promising with the endeavors of furthering healthcare and various other industries.

Modeling Of Expansion Of Laser-Produced Aluminum Plasma Plume In Ambient Air, Edmund Tsiri Semaha

Graduate Research Posters

When a laser pulse is focused on an aluminum target, it interacts with the material’s surface and a plasma plume is developed. Hydrodynamic expansion of generated plasma plume consisting of interacting target and ambient gaseous species remain one of very significant subjects of plasma plume chemistry, yet to be fully understood. The revealing of fundamental physics processes which occur within these plasma plumes is not only of purely scientific advancement, but it is also of industrial interest. Our research focuses on the development of Computational Fluid Dynamics (CFD) model that is used to investigate the chemistry of expanding plasma generated …

Spatiotemporal Retrievals Of Soil Moisture And Geomorphologic Data For Landslide Sites In Eastern Kentucky, Lindsey Sebastian Bryson, Daniel M. Francis

Civil Engineering Research Data

These data are the soil texture, land information system-based soil moisture estimates from assimilation of NASA SMAP satellite-based observations and NOAH 3.6 Land Surface Model estimates, artificial neural network machine learning code, and in-situ soil moisture measurements.

Classifying Multi-Generational Products For The Circular Economy, Buddhika M. Hapuwatte, Fazleena Badurdeen, I. S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Manufacturers are increasingly interested in the circular economy (CE) and potential of circular productions. To fully utilize CE, better guidance at the design stage is needed to establish closed-loop flows and prioritize higher value retaining end-of-use (EoU) practices such as reuse and remanufacture (i.e., parts harvesting). Intergenerational commonality (IC) is a method to increase EoU parts harvesting. However, closed-loop parts harvesting potential depends on the compatible timing between design generations’ production and EoU returns curves. Therefore, in this paper, we explore an approach to make an initial assessment on where IC as a closed-loop CE strategy can produce most benefit, …

Identifying A Novel Ferrocene Derivative As A K-Ras Inhibitor, Kristen Marie Rehl

Browse all Theses and Dissertations

Ras proteins are small GTPases that regulate cell proliferation, differentiation and survival at the plasma membrane (PM). There are three Ras isoforms ubiquitously expressed in mammalian cells: H-, N- and K-Ras. Constitutively active Ras mutations are found in ~19% of all human cancers, with ~75% of those being in K-Ras. There are K-Ras inhibitors in clinic but they only target the oncogenic K-RasG12C mutant, which only makes up a small sub-set of K-Ras-driven cancers. Thus, there still exists a need for a pan anti-K-Ras drug. Ferrocene derivatives are a class of compounds that have been shown to inhibit the growth …

Data-Driven Strategies For Pain Management In Patients With Sickle Cell Disease, Swati Padhee

Browse all Theses and Dissertations

This research explores data-driven AI techniques to extract insights from relevant medical data for pain management in patients with Sickle Cell Disease (SCD). SCD is an inherited red blood cell disorder that can cause a multitude of complications throughout an individual’s life. Most patients with SCD experience repeated, unpredictable episodes of severe pain. Arguably, the most challenging aspect of treating pain episodes in SCD is assessing and interpreting the patient’s pain intensity level due to the subjective nature of pain. In this study, we leverage multiple data-driven AI techniques to improve pain management in patients with SCD. The proposed approaches …

Processing And Characterization Of Inkjet Printed Batio3/Su-8 Nanocomposite Dielectrics, Mustapha A. Muhammad

Browse all Theses and Dissertations

The persistent demand for flexible and wearable electronic components in healthcare, aerospace, media, and transit applications has led to a significant shift from traditional electronics processes to printed electronics. Printed electronics are anticipated to establish itself as the industry's dominant force due to their enhanced flexibility, rapid prototyping capabilities, and seamless integration with everyday objects. They are cost-effective and have the scalable option for large-scale production because additive manufacturing techniques are used. Among the various printing methods available, inkjet printing has recently gained popularity for printing electronics, especially capacitors that require precise and complex structures on different substrates. Inkjet printing …

A Novel Knowledge-Based Federated Deep Learning Approach For Enhancing Security And Privacy Preservation In Iot Edge Computing Applications, Tabassum Simra

Browse all Theses and Dissertations

The Internet of Things (IoT) infrastructure encompasses smart devices and real-time sensors connected through the Internet, facilitating the exchange of large datasets among these devices. This interconnected network of IoT sensors generates a significant volume of data for processing and analysis by embedded IoT Edge Computing systems. IoT Edge Computing systems enable efficient real-time analysis and data communications. Furthermore, IoT Edge Computing emerges to enhance the overall efficiency of IoT applications, making them adept at handling the dynamic demands of AI-based and large data-driven applications. The integration of IoT Edge Computing introduces several unique research challenges. Unfortunately, IoT Edge Computing …

Application Of Genomic Compression Techniques For Efficient Storage Of Captured Network Traffic Packets, James Alfred Loving

CCAC Theses and Dissertations

In cybersecurity, one of most important forensic tools are audit files; they contain a record of cyber events that occur on systems throughout the enterprise. Threats to an enterprise have become one of the top concerns of IT professionals world-wide. Although there are various approaches to detect anomalous insider behavior, these approaches are not always able to detect advanced persistent threats or even exfiltration of sensitive data by insiders. The issue is the volume of network data required to identify this anomalous activity. It has been estimated that an average corporate user creates a minimum of 1.5 MB audit data …

Descriptive Systematics Of Upper Palaeocene–Lower Eocene Pollen And Spores From The Northern Niger Delta, South-Eastern Nigeria, Luke Mander, Carlos Jaramillo, Francisca Oboh-Ikuenobe

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fossil pollen and spores are a vital source of information on the geological history of tropical vegetation including reconstructions of vegetation diversity and composition. However, such work relies on a sound taxonomic framework, and this is challenging to achieve because of the large number of pollen and spore morphotypes that are encountered in palynological preparations from tropical sediments. In tropical West Africa, for example, extensive taxonomic work on Cretaceous–Paleogene pollen and spores was undertaken in the later part of the twentieth century, but more recent palynological work has focused on stratigraphy and basin evolution, and there is a need for …

Evaluation Of The Impact Of The Covid-19 Pandemic On The Teaching Of Otolaryngology And Cervico-Facial Surgery, I. Tahiri, H. Bensouda, O. Haddani, O. El Houari, S. Anajar, L. Taali, A. Hajjij, M. Essaadi, M. Jahidi, F. Benariba, M. Zalagh, F. Guessous, S. Chaouir

Health Sciences

Background: During the Covid-19 pandemic, distance learning is increasingly present in the field of education, particularly in the health sciences. This type of teaching has emerged as the appropriate solution to the problem of knowledge transfer. The objective of this study is to evaluate the impact of distance learning of the ENT (ear, nose and throat) and CFS (cervico-facial surgery) module on students and the impact of the pandemic on their quality of life. Methods: We conducted a survey on students' feelings about distance learning courses, the impact of the pandemic on their lifestyle and the consequences of the protective …

Student Evaluation Of Pre-Clinical Teaching On A Dental Simulator, Manal Elhijazi, Hafsa Elmrini, Ihsane Benyahya

Health Sciences

Context: Student evaluation of teaching (SET) is a pedagogical tool which is part of a quality control process of teaching. Material and methods: An anonymous and voluntary e-questionnaire was sent to all 3rd year students of the Faculty of Dentistry in university Mohamed VI of sciences and health at the end of the academic year 2021-2022 in order to evaluate the progress of practical pre-clinical learning by dental simulator in conservative dentistry. The aim was to evaluate the teaching tools, the organization of the lessons, the content of the program as well as their overall perceptions of this practical pre-clinical …

Pharmacy Students' Perception And Satisfaction With Chemistry Education: A Crosssectional Study, Fayssal Jhilal, Lamia Slimani, Lamia Zaari Lambarki, Ali Jafri, Samy Iskandar, Mariam El Jemli, Najib Alidrissi, Samir Ahid

Health Sciences

Chemistry is an important part of the curriculum for pharmacy students, as there are many disciplines within chemistry that are actually involved in the design and development of drugs, namely; general chemistry, synthetic organic chemistry, analytical chemistry, biochemistry, pharmaceutical chemistry (or therapeutic chemistry), pharmacognosy and materials chemistry for the design of dosage forms. The learning of chemistry by pharmacy students is generally influenced by their perception of theoretical courses, tutorials or practical work. In order to evaluate this perception, we conducted a cross-sectional study based on an anonymous electronic questionnaire distributed to students of all the Moroccan Faculty of Pharmacy …

Instrumental Fracture In Endodontics: A Short Review, Fatima Zohra Rouggani, Ayoub Belkamel

Health Sciences

Oneofthemostfrequentaccidentsthattakeplaceduringstandardendodontictreatment is instrument fracture. The fractured instrument such as a metallic obstruction inthe root canal system, hinders cleaning and shaping operations, and affects the effectivenessofendodontictherapy.Themanagementofinstrumentfracture,factorsthataffe ctinstrumentfracture,andprecautionsforinstrumentfracturearethethreeheadingsusedtoel aborateonthistopicin thisreview.