Engineering Commons^™

Urban Air Mobility (Uam) Flight Path: Literature Review And Conceptual Design Of Uam Corridor Virtual Lane System Using “Tracks”, Immanuel Bankole

Student Works

As the Urban Air Mobility (UAM) industry grows and becomes more popular, most of the conversations in the public domain are focused on the (electric Vertical Take-off and Landing) eVTOL aircraft and the physical infrastructure that will support these eVTOL aircraft. However, there is a lack of research on UAM traffic management and flight paths taken by aircraft between locations.

The United States (U.S.) Federal Aviation Administration has proposed the use of corridors to minimize the interaction between UAM operations and traditional air traffic as eVTOL aircraft perform flight activities. The government also acknowledges the need for additional structures (such …

Steering Particles Via Micro-Actuation Of Chemical Gradients Using Model Predictive Control, Mark N. Mcdonald, Cameron K. Peterson, Douglas R. Tree

Faculty Publications

Biological systems rely on chemical gradients to direct motion through both chemotaxis and signaling, but synthetic approaches for doing the same are still relatively naïve. Consequently, we present a novel method for using chemical gradients to manipulate the position and velocity of colloidal particles in a microfluidic device. Specifically, we show that a set of spatially localized chemical reactions that are sufficiently controllable can be used to steer colloidal particles via diffusiophoresis along an arbitrary trajectory. To accomplish this, we develop a control method for steering colloidal particles with chemical gradients using nonlinear model predictive control with a model based …

Ash Aerosol Particle Size Distribution, Composition, And Deposition Behavior While Co-Firing Coal And Steam-Exploded Biomass In A 1.5 Mwth Combustor, Rajarshi Roy, Brian Schooff, Xiaolong Li, Scott Montgomery, Jacob Tuttle, Jost O.L. Wendt, Kingsley Dickson, Brian Iverson, Andrew R. Fry

Faculty Publications

Five different blends of Utah bituminous coal and steam-exploded pine (100/0, 75/25, 50/50, 25/75, 0/100 by mass) were fired in a 1.5 MWth combustor. Primary objectives were to understand mineral matter behavior by analyzing aerosol size distribution, aerosol size-segregated composition, ash deposition mass, and ash composition. For particle size < 0.1 μm, pure coal had the lowest aerosol concentration and pure biomass showed the highest (higher nucleation of potassium salts), a trend which reversed for particles >0.1 μm. During pure biomass combustion, aerosol particles >15 μm contained higher mass fractions of potassium (+126%), calcium (+132%), and iron (+115%) and lower fractions of aluminum (−49%) and silicon (−29%) than pure coal. Ash deposition mass decreased with increasing biomass blends. …

Letting Go Of Pilot Stigma: A Commentary On Hubbard (2016), Timothy G. Rosser

International Journal of Aviation Sciences (IJAS)

No abstract provided.

Icao Commentary On Hubbard (2016): Stigma And Pilots With Mental Health Issues, Ansa Jordaan

International Journal of Aviation Sciences (IJAS)

No abstract provided.

Stigma And Pilots With Mental Health Issues, Todd P. Hubbard

International Journal of Aviation Sciences (IJAS)

What makes the stigma surrounding pilots with mental health issues an important issue? Until recently, stigma was of minor concern. There were plenty of pilots without issues. Pilots with weaknesses had their careers cut short, if they let it be known that they had a psychological condition. So the numbers of pilots reporting psychological conditions were few. It was simple. Refrain from telling on yourself and you are allowed to fly. Tell on yourself and you suffer the consequences of stigma and maybe a shortened career. Stigma is similar to bullying. It creates a hostile work environment for those affected. …

Training For Warfighter Decision Making: A Survey Of Simulation-Based Training Technologies, Nina Rothstein

International Journal of Aviation Sciences (IJAS)

Training warfighters requires the establishment, enhancement, and assessment of decision making (DM) skills at various levels. This review seeks to identify DM training technologies at the tactical and operational levels of war. Simulation based training (SBT) provides learning experiences for improved cognitive abilities and retention of complex skills. Here, seven SBTs will be evaluated for their situational awareness (SA) training abilities for decision making. Valuation of the included SBTs examine the modifiability (scenario customization), data availability (physiological and behavioral), assessment methods (feedback and after action reviews), validity (team training), and fidelity (2D or 3D environments) for tactical and operational warfighter …

Integration Of Unmanned Aircraft Systems In Public Higher Education, John Mott, Ardyth M. Williams, Darcy M. Bullock

International Journal of Aviation Sciences (IJAS)

It is estimated that there are over one million unmanned aircraft systems (UAS) that, if operated incorrectly, can pose a significant threat to individuals, property, and other aircraft. Many of these systems are now finding their ways into universities, where they are operated by nonaviation professionals with an overall objective of exploring new research opportunities. While these initiatives hold significant promise for technical advancements, some employ relatively primitive operational and safety protocols. This article reviews FAA rules and reports on a university effort that has developed a formal partnership between an established aviation center utilizing licensed pilots and an engineering …

Comparison Of Three Angle Of Attack (Aoa) Indicators: A Usability Study, Camilo Jimenez, Claas Tido Boesser, Florian Jentsch

International Journal of Aviation Sciences (IJAS)

Angle of Attack is an important aeronautical concept used to understand the aerodynamic performance of an aircraft during different flight stages. The Federal Aviation Administration has indicated the importance of developing and encouraging the use of AOA based systems to increase flight safety. This study examined the usability of three different AOA indicators. The goal was to identify which of these indicators is better suited for student pilot training. Instructor pilots were recruited for a series of flights, in which they were asked to perform different maneuvers while using AOA indicators. The data show significant differences between the indicators with …

Vfr Flight Planning With Paper Charts Versus Electronic Charts, Tyler A. Babb

International Journal of Aviation Sciences (IJAS)

Historically, VFR flight planning has been accomplished using an E6B flight computer, paper chart, and navigation plotter. Pilots have used these tools to determine the course, speed, and fuel required for a particular flight. These conventional tools have been a cornerstone of private pilot training for many years. Many types of flight planning software are currently available with a great range in cost and capability. ForeFlight Mobile™ is one of the most prominent flight software applications in use today. The software provides electronic navigation charts and tools that simplify flight planning for pilots. Distance, speed, and time calculations can be …

An Analysis Of The Effects Of Demographic Variables And Perceptions On The Safety Reporting Behavior In Collegiate Flight Programs, Daniel Kwasi Adjekum, Micah Walala, Julius Keller, Cody Christensen, Randal J. Demik, John P. Young, Gary J. Northam

International Journal of Aviation Sciences (IJAS)

The purposes of this study were to assess the perceptions of respondents on scale items that measure safety culture in collegiate aviation programs in the United States (U.S.) and establish levels of interactions between demographic variables and safety reporting behavior. A convenience sample (n = 259) of flight students inclusive of those who are flight instructors from five collegiate aviation programs in the U.S. responded to scale items adopted from the Collegiate Aviation Perceptions of Safety Culture Assessment Survey (CAPSCAS) online. The highest perception mean score was on Safety Fundamentals (4.2) and the lowest perception mean score was on Safety …

More On Applied Research Categories Pertaining To Aviation, David Trafimow

International Journal of Aviation Sciences (IJAS)

No abstract provided.

Applied Research Categories Within Aviation: A Commentary On Trafimow (2016), Chris Sidor

International Journal of Aviation Sciences (IJAS)

No abstract provided.

The Academic Side Of Applied Aviation Research: A Commentary On Trafimow (2016), Steven Leib

International Journal of Aviation Sciences (IJAS)

No abstract provided.

Rethinking The Value Of Applied Research And Researcher Accountability: A Commentary On Trafimow (2016), Richard O. Fanjoy Ph.D.

International Journal of Aviation Sciences (IJAS)

No abstract provided.

When To Link Theory And Research: A Commentary On Trafimow (2016), John E. Deaton

International Journal of Aviation Sciences (IJAS)

No abstract provided.

A Taxonomy Of Applied Research Categories As An Aid To Research Pertaining To Aviation, David Trafimow

International Journal of Aviation Sciences (IJAS)

Based on the notion that applied research can be theoretically grounded or not theoretically grounded, I suggest that there are roughly four categories within which quality work in this area can fall: basic research, auxiliary assumptions, theory combined with auxiliary assumptions, and research without theory. Although the importance of auxiliary assumptions in traversing the distance between theories and their applications cannot validly be denied, applied researchers, including those in the aviation area, often have ignored them. But auxiliary assumptions play an important role in understanding the four categories that I propose. Finally, I argue that much of the applied research …

Avionics Market Forecasting: Comparing The Performance Of Artificial Neural Networks Forecasting With Traditional Forecasting Techniques, Jason Alexander Hoop, Walter Rodriguez

International Journal of Aviation Sciences (IJAS)

Avionics can be thought of as the nervous system sustaining aircraft operations, and accurate forecasting is critical in predicting system demand. Modeled after their biological counterpart, artificial neural networks (ANNs) maintain the ability to recognize trends in chaotic and nonlinear systems. These models possess the capability to produce more accurate predictions than those of traditional forecasting methods. The purpose of this paper is to provide a comprehensive overview of ANNs and detail the use of these techniques as a tool for forecasting in the avionics field. Furthermore, it introduces and examines several commonly used types of predictive ANNs. The performance …

Moving Towards Unmanned Aircraft Systems Integration Into The National Airspace System: Evaluating Visual Observers’ Imminent Collision Anticipation During Day, Dusk, And Night Suas Operations, Igor Dolgov

International Journal of Aviation Sciences (IJAS)

An experiment was conducted in an austere desert location (entirely lacking artificial light pollution) to evaluate visual observers’ ability to maintain line of sight with a light-sport manned aircraft and a small unmanned aircraft system (sUAS; Raven RQ-11B or Wasp III) and predict imminent collisions between them. We investigated the impact of night and dusk operational settings on observers’ performance as compared to daytime and manipulated the placement of the critical visual observer in relation to the sUAS pilot. Analyses revealed that the light-sport aircraft was identified at significantly farther distances at night and dusk than during the day, and …

General Solution Of The Wind Triangle Problem And The Critical Tailwind Angle, Nihad E. Daidzic Ph.D., Sc.D.

International Journal of Aviation Sciences (IJAS)

A general analytical solution of the navigational wind-triangle problem and the calculation of the critical tailwind angle are presented in this study among other findings. Any crosswind component will effectively create a headwind component on fixed course tracks. The meaning of a route track is lost with excessive crosswinds representing the bifurcation point between the possible and the impossible navigational solutions. Any wind of constant direction and speed will effectively reduce groundspeed and increase time-of-flight on closed-loop multi-segment flights. Effective wind track component consists, in general, of true and induced components. The average groundspeed of multiple-leg flights is a harmonic …

The Effect Of Foam Configuration On The Cushion Performance, Xiaojing Liu, Min Degruson

Journal of Applied Packaging Research

T

This research exhibits the cushion design process for protecting a product during the distribution environment and examines the effect of the final design by ISTA 1A drop tests. Currently, few research on the principles of cushion design in protective packaging has been undertaken. Rare research on cushion configuration and its performance. The study started with proposed several cushions distribute layouts - face pad, edge pad, and corner pad, along one orientation. Samples were tested, analyzed, and compared by static compress and dynamic drop tests. After manufacturing and engineering consideration were involved, two improved cushion configuration designs were applied to …

Estimating Solar Energy Production In Urban Areas For Electric Vehicles, Shaimaa Ahmed

Theses and Dissertations

Cities have a high potential for solar energy from PVs installed on buildings' rooftops. There is an increased demand for solar energy in cities to reduce the negative effect of climate change. The thesis investigates solar energy potential in urban areas. It tries to determine how to detect and identify available rooftop areas, how to calculate suitable ones after excluding the effects of the shade, and the estimated energy generated from PVs. Geographic Information Sciences (GIS) and Remote Sensing (RS) are used in solar city planning. The goal of this research is to assess available and suitable rooftops areas using …

A Novel Approach For Optimal Sizing Of Stand-Alone Solar Pv Systems With Power Quality Considerations, Aakash Hassan, Octavian Bass, Yasir M. Al-Abdeli, Martin Masek, Mohammad A. S. Masoum

Research outputs 2022 to 2026

Designing reliable and cost-effective solar PV systems with compliance to national and international power quality standards is critical for their economical, efficient, and safe operation. The conventional approaches currently being used to optimally size the solar PV systems generally ignore power quality criteria during the initial design phase. This paper fills this gap by presenting a novel Genetic Algorithm (GA) based strategy to design a stand-alone solar PV system featuring optimal system size with conformance to power quality standards. MATLAB/Simulink environment was used to develop a detailed model of solar PV system, including a robust control mechanism for maximum power …

Electrochemical Sensors And Biosensors Of Biomarkers And Therapeutic Agents Detection, Mahmoud Abdelhakem

Theses and Dissertations

Electrochemical sensing is a pioneering tool amongst all other sensing techniques even though it had been started in the early 20th century. Due to their cost efficacy, accuracy, and real-time measurement, electrochemical sensing has been utilized in a vast of biomedical applications in therapeutic drug monitoring and biomarker detection. This thesis work concerned the monitoring of three therapeutic agents in spiked plasma, urine, dosage form, and interstitial skin fluid with high specificity and accuracy. Two of our sensing platforms utilized nanomaterials for sensing (sensors) of Cilostazol and Velpatasvir utilizing α-MnO2-V2O5 (metal oxide nanorods) and NH2- MIL-53 (Aluminum-based metal organic frameworks), …

Skeleton-Based Hand Gesture Recognition Using Data-Level Fusion, Oluwaleke Yusuf

Theses and Dissertations

Hand Gesture Recognition (HGR) is a form of perceptual computing that allows artificial systems to capture and interpret human gestures. HGR has applications in human-machine interaction, virtual reality, augmented reality, and human behavior analysis. The human hand can assume a near-infinite number of poses and orientations to form myriad gestures, thus increasing the difficulty of the HGR task.

The hand skeleton of connected joints effectively describes the hand’s geometric shape and thus contains richer semantic gesture information while eliminating noise from individual differences in physical hand characteristics. The efficacy and computational efficiency of skeleton-based HGR frameworks can be significantly enhanced …

Polyethersulfone Thin-Film Nanocomposite Membrane Embedded With Amine-Functionalized Graphene Oxide For Desalination Applications, Ahmed Bahaeldin

Theses and Dissertations

Thin-film nanocomposite (TFN) desalination membranes were prepared based on a polyethersulfone (PES) support, where the polyamide (PA) layer was embedded with amine-functionalized graphene oxide (GO). The effect of adding various concentrations of functionalized and un-functionalized GO on the desalination performance, hydrophilicity, and morphology of the membranes was additionally assessed throughout this work. Scanning electron microscopy (SEM) measurements were used to assess the morphology of the membranes in combination with Brunauer-Emmett-Teller (BET) analysis. Contact angle measurements were used to gauge the hydrophilicity of the synthesized membranes. The membrane with the best desalination performance contained 1x10^-3 wt/vol% of functionalized GO in …

An Artificial Intelligence Tool For The Selection Of Delay Analysis Technique In Construction, Mostafa Farouk

Theses and Dissertations

The increasing complexity and magnitude of projects impose greater impact of delays on stakeholders. Construction delays are a major source of disputes in construction projects. Since a construction project depends on interactions and shared responsibilities among parties, research works were directed toward identifying delay causes, quantifying their impacts, and proposing ways to deal with them. Several delay analysis techniques (DATs) are available, but when applied to the same project’s delays provide different results. Thus, the selection of the DAT to use in evaluating delays becomes vital. Reviewing the literature, it has been realized that often there are disagreements, which lead …

In-Field Solar Panel Assessment And Fault Diagnosis, Muhammad Elgamal

Theses and Dissertations

Photovoltaic energy is a green energy that suit from small houses to high-power stations spanning large areas. In such large areas, monitoring individual panels can be a tedious task, especially if it was required to identify operational faults of these panels. Photovoltaic 4.0 technology depend on collecting data from each station and feeding them to a central processing system that can analyze operation data and hopefully locate when a fault happens. In such method, it is crucial to be accurate as much as possible and for measuring device to be accurate as well to have a clear judgement. In this …

Optimization Of Contractor’S Cash Flow Based On Subcontractor’S Payment Management Plans, Helen Ghali

Theses and Dissertations

In many counties, the construction industry relies heavily on outsourcing packages to execute their projects and expand their businesses to fit in the diverse market. Such extensive integration of outsourced subcontractors is becoming an influential factor in contractors' cash flow management. Accordingly, subcontractors’ price selection and their respective payment plans are important phenomena and pivotal components for the well-being of the contractor’s cash flow. Cash flow management is considered one of the most critical areas analyzed by contractors when getting into a project. Contractor’s cash flow is built from a pool of interrelated information depending on subcontractors, suppliers trade credit …

Price Prediction Models Of Metals Considering International Crises, Haidy Ghali

Theses and Dissertations

Steel, copper, and aluminum are essential raw materials in the construction industry and are used in any construction project whether commercial, industrial, or mega projects. During normal market conditions, the prices of these metals normally fluctuate due to general inflation in the economy; however, during crises, the prices of these metals significantly fluctuate exposing both contractors and suppliers to an unexpected financial risk. Various researchers have developed metal prediction models for normal market condition and did not consider testing it on the crises time; also, the developed models are devised using past metal prices or macroeconomic indicators of trading countries …