Engineering Commons^™

Network Economics-Based Crowdsourcing In Online Social Networks, Natasha S. Kubiak

Electrical and Computer Engineering ETDs

This thesis addresses the challenge of user recruitment by various competing marketing agencies (MAs) in Online Social Networks. A labor economics approach, following the principles of contract theory, is devised to enable MAs to reveal the potential of each participating user to contribute a personalized level of quality and quantity of information to the crowdsourcing process. The MAs objective is to maximize their personal benefit, i.e., total utility obtained, given its budget. The latter optimization problem is formulated as a Generalized Colonel Blotto (GCB) game among the MAs, where each MA aims at incentivizing each user to report its information. …

Development Of Novel Electrodes And Electrolytes For Safer Aqueous Ammonium Ion Batteries With Enhanced Performance., Shelton Farai Kuchena

LSU Doctoral Dissertations

The Lithium-ion battery (LIBs) system has dominated the battery market because of its superior energy and power density. Problems related to LIBs such as safety, scarcity of cobalt and lithium have led researchers to explore alternative battery systems. NH₄⁺ ion is a nonmetal charge carrier with lower molar mass (18 mol g^-1) and smaller hydrated ionic size (3.31 Å) which results in excellent electrochemical properties. Furthermore, NH₄⁺ ion has a tetrahedral structure that has no preferred orientation as compared to spherical metal ions giving a different intercalation chemistry based on hydrogen bonding. These properties …

Seasonal Seepage Fluid Flow And Pressure Detection Beneath Flood Protection Levees In The Lower Mississippi River Valley Using Non-Invasive Geophysical Methods, Daniel Locci

LSU Doctoral Dissertations

This study explores the use of shear-wave seismic reflection and electrical resistivity techniques to complement our understanding of seepage pore pressure variations and soil type estimation beneath earthen levees in the Mississippi River floodplain. The seasonal variations of water level in the river create changes in pore pressure in the adjacent aquifer, which can be detected using time-lapse shear-wave velocity analysis. The seismic reflection patterns during these pressure variations show changes in velocity that can be translated into changes in effective pressure, allowing us to distinguish between confined and leaky aquifers.

In addition, the integration of geophysical methods such as …

Influence Of Henna Extracts On Static And Dynamic Adsorption Of Sodium Dodecyl Sulfate And Residual Oil Recovery From Quartz Sand, Mohd Syazwan Mohd Musa, Priveqa Yaashini Gopalan, Nurudeen Yekeen, Ahmed Al-Yaseri

Research outputs 2022 to 2026

The application of surfactant flooding for enhanced oil recovery (EOR) promotes hydrocarbon recovery through reduction of oil-water interfacial tension and alteration of oil-wet rock wettability into the water-wet state. Unfortunately, surfactant depletion in porous media, due to surfactant molecule adsorption and retention, adversely affects oil recovery, thus increasing the cost of the surfactant flooding process. Chemical-based materials are normally used as inhibitors or sacrificial agents to minimize surfactant adsorption, but they are quite expensive and not environmentally friendly. Plant-based materials (henna extracts) are far more sustainable because they are obtained from natural sources. However, there is limited research on the …

Structural Testing Of Concrete Walls On-Edge With Combined Axial And Out-Of-Plane Loading, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Full-scale testing of structural components can be time consuming and difficult. The design of full- scale slender concrete walls is highly influenced and controlled by second-order and out-of-plane bending loads. Previous experiments on out-plane bending of slender walls and insulated walls have been performed with bending in the direction of gravity (with or against). Additionally, most of the research considering out-of-plane bending does not include an axial load and suffers from inaccurate results due to not simulating the actual loading and constraining conditions or safety issues. This testing method was developed expressly for the determination of slender wall behavior in …

Characterization And Amelioration Of Filtration Difficulties Encountered In Metabolomic Studies Of Clostridium Thermocellum At Elevated Sugar Concentrations, Bishal D. Sharma, Daniel G. Olson, Richard J. Giannone, Robert L. Hettich, Lee R. Lynd

Dartmouth Scholarship

Clostridium thermocellum, a promising candidate for consolidated bioprocessing, has been subjected to numerous engineering strategies for enhanced bioethanol production. Measurements of intracellular metabolites at substrate concentrations high enough (>50 g/L) to allow the production of industrially relevant titers of ethanol would inform efforts toward this end but have been difficult due to the production of a viscous substance that interferes with the filtration and quenching steps during metabolite extraction. To determine whether this problem is unique to C. thermocellum, we performed filtration experiments with other organisms that have been engineered for high-titer ethanol production, including Escherichia coli and Thermoanaerobacterium …

Neutrosophic Marcos In Decision Making On Smart Manufacturing System, Nivetha Martin, Said Broumi, S. Sudha, R. Priya

Neutrosophic Systems with Applications

Business firms prefer software-based smart manufacturing systems to monitor and supervise all production activities in a decentralized manner. The choice of software decides the degree of manufacturing robustness. This paper proposes a neutrosophic-based MARCOS (Measurement of Alternatives and Ranking according to COmpromise Solution) method of MCDM with single-valued triangular neutrosophic numbers to solve the software selection problem. The proposed neutrosophic method is applied to hypothetical data to test the efficacy of the method. The results obtained using the proposed method are compared with crisp, fuzzy, and intuitionistic data representations, and suitable inferences are acquired. The proposed method has several industrial …

The Intersection Of Culturally Responsive Pedagogy And Engineering Design In Secondary Stem, Mariam Manuel, Jessica Gottlieb, Gina Svarovsky, Rebecca Hite

Journal of Pre-College Engineering Education Research (J-PEER)

The instructional practices of the engineering design process and culturally responsive pedagogy have each garnered national attention and multiple decades of research. Findings from the respective literature bases call for educators and policymakers to integrate these two pedagogical approaches into K-12 classroom instruction. Scholars have argued that this integration would improve student engagement and academic achievement. There is a significant amount of research that supports the positive student outcomes associated with each approach, yet there remains a dearth of literature that addresses the integration of these two practices into the science and mathematics content areas. The movement around educational reform …

Corrosion Case Study On Automobile, Grace Ajayi, Xinran Pan, Geethu Sasikala, Marshall S. Yang

Chemistry Publications

No abstract provided.

Improved Experimental Validation Of An Electromagnetic Subcell Model For Narrow Slots With Depth, Michael Anthony Illescas

Electrical and Computer Engineering ETDs

The coupling of electromagnetic (EM) energy into a system can disrupt operation of essential electronics present within it. Metal enclosures are used to shield these systems from potentially harmful electromagnetic interference (EMI). Seams and gaps in such metal enclosures are minimized but unavoidable for reasons such as maintenance and repair. These seams and gaps create an entry point for EM energy to couple into the system. Entry points are often modeled by EM analysts as narrow slots defined by their length, width, and depth. The depth of these slots can become significant compared to the wavelength, introducing resonances associated with …

Automated Sensing Methods In Soft Stretchable Sensors For Soft Robotic Gripper, Prosenjit Kumar Ghosh

Electrical Engineering Theses

A soft robot is made from deformable and flexible materials such as silicone, rubber, polymers, etc. Soft robotics is a rapidly evolving field where the human-robot-interaction and bio-inspired design align. The physical characteristics such as highly deformable material and dexterity make soft robots widely applicable. A soft robotic gripper is a robotic hand that acts like a human hand and grasps any object. The most common applications of soft robotics grippers are gripping and locomotion in sensitive applications where high dynamic and sensitivity are essential. Nowadays, soft robotics grippers are used without any sensing method and feedback as it is …

Study Of Lipophilicity And Adme Properties Of 1,9-Diazaphenothiazines With Anticancer Action, Beata Morak-Młodawska, Małgorzata Jeleń, Emilia Martula, Rafał Korlacki

Department of Electrical and Computer Engineering: Faculty Publications

Lipophilicity is one of the key properties of a potential drug that determines the solubility, the ability to penetrate through cell barriers, and transport to the molecular target. It affects pharmacokinetic processes such as adsorption, distribution, metabolism, excretion (ADME). The 10-substituted 1,9-diazaphenothiazines show promising if not impressive in vitro anticancer potential, which is associated with the activation of the mitochondrial apoptosis pathway connected with to induction BAX, forming a channel in MOMP and releasing cytochrome c for the activation of caspases 9 and 3. In this publication, the lipophilicity of previously obtained 1,9-diazaphenothiazines was determined theoretically using various computer programs …

Study Of Lipophilicity And Adme Properties Of 1,9-Diazaphenothiazines With Anticancer Action, Beata Morak-Młodawska, Małgorzata Jeleń, Emilia Martula, Rafał Korlacki

Department of Electrical and Computer Engineering: Faculty Publications

Lipophilicity is one of the key properties of a potential drug that determines the solubility, the ability to penetrate through cell barriers, and transport to the molecular target. It affects pharmacokinetic processes such as adsorption, distribution, metabolism, excretion (ADME). The 10-substituted 1,9-diazaphenothiazines show promising if not impressive in vitro anticancer potential, which is associated with the activation of the mitochondrial apoptosis pathway connected with to induction BAX, forming a channel in MOMP and releasing cytochrome c for the activation of caspases 9 and 3. In this publication, the lipophilicity of previously obtained 1,9-diazaphenothiazines was determined theoretically using various computer programs …

Technical And Regulatory Factors Of Adopting Electric Training Aircraft In A Collegiate Aviation Setting, Nick Wilson, Lewis Archer, Ryan Guthridge, Jeremy Roesler, Michael Lents

Aviation Faculty Publications

Electric-powered aircraft have entered the market. The arrival of the Pipistrel Velis Electro and other developmental efforts by companies such as Bye Aerospace, Piper, and eViation, have signaled to the aviation community that more electric-powered aircraft can be expected in the coming years. But how useful are they for training pilots in a Federal Aviation Administration (FAA) approved Part 141 collegiate aviation environment? To identify candidate flight courses and lessons, the authors examine flight hour distributions of a one-year window of invoiced flights (N = 52,728), including flight hour data cut-points at 60 minutes (n = 6,050) and 90 minutes …

A Hybrid Mcdm Approach For Industrial Robots Selection For The Automotive Industry, Abduallah Gamal, Mona Mohamed

Neutrosophic Systems with Applications

The use of robots in various stages of the production process is now commonplace across practically all sectors of the economy. Additionally, even for present-day small and medium-sized businesses, this has developed into a very powerful need in recent years and continues to grow in importance. The selection of an industrial robot is a very complicated decision-making issue due to the fact that there are numerous aspects and criteria that are in conflict with one another, as almost all of the earlier research emphasized. In addition, the many sophisticated requirements that have been added to these robots by the makers …

Fatigue Behavior And Calculation Methods Of High Strength Steel Fiber Reinforced Concrete Beam, Zhiqiang Gu, Hu Feng, Danying Gao, Jun Zhao, Congjie Wei, Chenglin Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Adding Steel Fibers into Concrete Was Considered as One of the Most Effective Ways to Restrain the Crack Development and Improve the Stiffness for Reinforced Concrete (RC) Structures. to Explore the Reinforcement Mechanism of Steel Fibers on the Fatigue Behavior of High-Strength RC Beam, Eight High-Strength Steel Fiber Reinforced Concrete (HSSFRC) Beams Subjected to Fatigue Loading Were Tested in This Study. the Main Design Parameters Considered in This Work Were Stress Level and Steel Fiber Content. the Failure Mode, Crack Patterns, Fatigue Life, Crack Width, and Stiffness Degradation of HSSFRC Beams under Fatigue Loading Were Discussed. the Results Showed that …

A Hybrid Mcdm Approach For Industrial Robots Selection For The Automotive Industry, Abduallah Gamal, Mona Mohamed

Neutrosophic Systems with Applications

The use of robots in various stages of the production process is now commonplace across practically all sectors of the economy. Additionally, even for present-day small and medium-sized businesses, this has developed into a very powerful need in recent years and continues to grow in importance. The selection of an industrial robot is a very complicated decision-making issue due to the fact that there are numerous aspects and criteria that are in conflict with one another, as almost all of the earlier research emphasized. In addition, the many sophisticated requirements that have been added to these robots by the makers …

Numerical Investigations Of Gfrc Beams Strengthened In Shear With Innovative Techniques, Marwa H. Bondok, Gamal I. Khaleel, Ahmed S. Debaiky, Mohamed H. Makhlouf

Mansoura Engineering Journal

This paper discusses the Finite Element analysis (FE) conducted to predict the behavior of Glass Fiber Reinforced Concrete (GFRC) beams without shear reinforcement (stirrups) and strengthen them with proposed techniques to increase their shear strength. for this study, A total of eighteen (18) (120 * 300 * 2200 mm) specimens were modeled using Ansys™ mechanical. The main variables were the percentage of discrete glass fiber in the concrete (0.0, 0.6, and 1.2%), the type of main reinforcing bars (steel or GFRP), the shear strengthening material (GFRP or steel) links, the strengthening systems (side near-surface mounted (SNSM) bars, externally bonded (EB) …

System Dynamics And Topsis Models For Sustainable Building Materials Selection Considering Life Cycle Assessment, Shimaa Elshoubaky, Emad Elbeltagi, Mohammed Abd Elrahman, Islam Elmasoudi

Mansoura Engineering Journal

Construction industry is the most contributor to the environmental impacts. Achieving sustainability in construction is complicated, but one of the most optimal strategies is selecting sustainable building materials.

The major goal of this study is to present a new idea for choosing sustainable building materials (SBMs) by simulating sustainability parameters' behaviour. This research proposes a System Dynamics (SD) model along with the TOPSIS method based on the dynamic interactions among a number of sustainable criteria to help decision makers in sustainable building materials selection. The sustainable criteria that form system boundary are determined from previous studies and experts′ opinions. The …

A Molecular Dynamics Study Of Atomic Diffusion Effects On Thermomechanical Properties Applying Laser Additive Alloying Process For The Cantor High Entropy Alloy, Mathew Farias, Han Hu, Shanshan Zhang, Jianzhi Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

High entropy alloys (HEAs) can be manufactured in many conventional ways, but it becomes difficult to fabricate heterogeneous materials and structures. The Selective Laser Melting (SLM) method generally melts pure elemental powders or prefabricated alloy powders without an alloying process. In-situ alloying in SLM, which is also called Laser Additive Alloying (LAA), using pure elemental powders becomes a promising method for creating HEA with heterogeneous structures. However, the effect of the diffusion of elements in the molten pool on the formation of HEA remains unclear. In this paper, the well-discussed Cantor HEA was studied in an in-situ alloying situation, where …

Dynamic And Equilibrium Contribution Of Nematic Order In Wetting And Contact Angles, Partho Neogi, Xianjie Qiu, Amer Al-Shareef

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Model for the Dynamic Contact Angles and the Spreading Kinetics of Nematic Liquid Crystals on a Solid Surface is Presented for the First Time using the Continuum Theory of Liquid Crystals. the Equations of Motion for This System Are Integrated for a Wedge or a Drop that is Thin and Moves Slowly. the Dynamic Contact Angle is Found to Depend on the Capillary Number that Represents the Importance of Viscocapillarity and on the Elasticity Number that is the Ratio between the Elastic and Surface Forces. the Model Provides an Explanation for the Extra Volume Dependence that is Reported in …

Microcanonical Thermodynamics Of Small Ideal Gas Systems, David S. Corti, Donya Ohadi, Ricardo Fariello, Mark J. Uline

Faculty Publications

We consider the thermal, mechanical, and chemical contact of two subsystems composed of ideal gases, both of which are not in the thermodynamic limit. After contact, the combined system is isolated, and the entropy is determined through the use of its standard connection to the phase space density (PSD), where only those microstates at a given energy value are counted. The various intensive properties of these small systems that follow from a derivative of the PSD, such as the temperature, pressure, and chemical potential (evaluated via a backward difference), while equal when the two subsystems are in equilibrium are nevertheless …

Fabrication Of Drug-Eluting Polycaprolactone And Chitosan Blend Microfibers For Topical Drug Delivery Applications, Mulugeta Gizaw, Diala Bani Mustafa, Shih-Feng Chou

Mechanical Engineering Faculty Publications and Presentations

Chronic and non-healing wounds show delayed and incomplete healing process, which expose the patients to a high risk of infection. These types of wounds require frequent change of dressing, which is a burden on the patients. In addition, ideal dressing needs to meet the requirements in minimizing microbial infiltration and growth while balancing moisture and exchanging oxygen with outside environment. To overcome the challenge in frequent change of dressing and meet the design requirements, current researches have focused on the development of electrospun fibers with incorporation of small molecule drugs for sustained release purpose. In this study, electrospinning was performed …

Experimental Evaluations Of The Impact Of An Additive Oxidizing Electronic Air Cleaner On Particles And Gases, Yicheng Zeng, Aurélie Laguerre, Elliott T. Gall, Mohammad Heidarinejad, Brent Stephens

Mechanical and Materials Engineering Faculty Publications and Presentations

Electronic air cleaning (EAC) technologies have garnered significant attention for use in buildings. Many EAC technologies rely on the addition of reactive constituents to indoor air to react with gas-phase compounds, enhance particle deposition, and/or inactivate microorganisms. However, limited data are available on the efficacy of many EAC technologies and their potential to form chemical byproducts during operation. Here we experimentally evaluate the indoor air quality impacts, specifically targeting particles and gases but not microbial constituents, of a commercially available additive oxidizing EAC that generates positive and negative ions and hydrogen peroxide (H2O2). Tests were conducted in a large unoccupied …

Mitochondrial Complex Iii Bypass Complex I To Induce Ros In Gpr17 Signaling Activation In Gbm, Sana Kari, Jeyalakshmi Kandhavelu, Akshaya Murugesan, Ramesh Thiyagarajan, Srivatsan Kidambi, Meenakshisundaram Kandhavelu

Department of Chemical and Biomolecular Engineering: Faculty Publications

Guanine nucleotide binding protein (G protein) coupled receptor 17 (GPR17) plays crucial role in Glioblastoma multiforme (GBM) cell signaling and is primarily associated with reactive oxidative species (ROS) production and cell death. However, the underlying mechanisms by which GPR17 regulates ROS level and mitochondrial electron transport chain (ETC) complexes are still unknown. Here, we investigate the novel link between the GPR17 receptor and ETC complex I and III in regulating level of intracellular ROS (ROSi) in GBM using pharmacological inhibitors and gene expression profiling. Incubation of 1321N1 GBM cells with ETC I inhibitor and GPR17 agonist decreased the ROS level, …

Experimental And Computational Fluid Dynamics Investigation Of Mechanisms Of Enhanced Oil Recovery Via Nanoparticle-Surfactant Solutions, Nurudeen Yekeen, Ali Masoud Ali Elakkari, Javed Akbar Khan, Muhammad Ali, Ahmed Al-Yaseri, Hussein Hoteit

Research outputs 2022 to 2026

The enhancement in surfactant performance at downhole conditions in the presence of nanomaterials has fascinated researchers’ interest regarding the applications of nanoparticle-surfactant (NPS) fluids as novel enhanced oil recovery (EOR) techniques. However, the governing EOR mechanisms of hydrocarbon recovery using NPS solutions are not yet explicit. Pore-scale visualization experiments clarify the dominant EOR mechanisms of fluid displacement and trapped/residual oil mobilization using NPS solutions. In this study, the influence of multiwalled carbon nanotubes (MWCNTs), silicon dioxide (SiO₂), and aluminum oxide (Al₂O₃) nanoparticles on the EOR properties of a conventional surfactant (sodium dodecyl benzene sulfonate, …

Large-Scale Testing Of Lightweight Cellular Concrete Backfill For Sliver-Fill Mse Wall Configurations, Meghann Dee Morgan

Theses and Dissertations

Lightweight cellular concrete (LCC) is an aerated or foamed concrete where 25-80% of the concrete matrix consists of air voids. The high volume of air voids reduces the strength but significantly decreases the weight of the material, which has made it an attractive alternative to soil for retaining structure backfills. Though the use of LCC has increased, little research has been performed on the large-scale behavior of retaining structures containing LCC as backfill. This research test attempts to fill knowledge gaps found with regard to the use of LCC in a mechanically stabilized earth (MSE) wall with a trapezoidal or …

Bodyslam: Feasibility Of Tracking Human Kinematics With Simultaneous Localization And Mapping (Slam), Sepehr Laal

Dissertations and Theses

We evaluated a new wearable technology that fuses inertial sensors and cameras for tracking human kinematics. These devices use on-board simultaneous localization and mapping (SLAM) algorithms to localize the camera within the environment. Significance of this technology is in its potential to overcome many of the limitations of the other dominant technologies. Our results demonstrate this system often attains an estimated orientation error of less than 1° and a position error of less than 4cm as compared to a robotic arm. This demonstrates that SLAM's accuracy is adequate for many practical applications for tracking human kinematics.

Multiple Access Techniques Enabling Diverse Wireless Services, Mehmet Mert Şahin

USF Tampa Graduate Theses and Dissertations

The growing interest in diverse wireless applications such as virtual reality (VR), digital twin, ultra-massive broadband communication (u-MBB) has led the cellular industry to look for new multiple accessing schemes and new signal processing techniques for utilization of next-generation wireless technologies. Throughout the PhD duration, different studies are performed in regards to dual-functional and interference robust multiple accessing and control of electromagnetic radiation for cognitive radio systems. Firstly, a novel concept on non-orthogonal multiple access (NOMA), which is the coexistence of different waveform structures in the same resource elements is proposed. Secondly, a novel JCR waveform is proposed to serve …

Examining The Impact Of Different Street Lighting Schemes On Traffic Safety And Drivers’ Behaviors At Unsignalized Intersections, Hisham Mohamed Abdu Kunnah

LSU Master's Theses

Lack of visibility is one of the main challenges that significantly impact drivers’ ability to safely perform driving tasks at night especially at unsignalized intersections. Several prior studies indicated that lighting enhances nighttime traffic safety. Nevertheless, lighting is not mandatory at unsignalized intersections in many states including Louisiana. This study aimed to investigate if lack of lighting is a contributing factor that affects traffic safety at unsignalized intersections in Louisiana. In addition, this study strived to identify current lighting policies adopted by other states, examine if there are any low-cost countermeasures implemented by other states to improve nighttime visibility, and …