Engineering Commons^™

Research On Construction Method Of Ubiquitous Operating System Open Source Ecosystem Based On Internet Of Everything, Meng Wang, Weidong Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

Building an independent, healthy, and sustainable open source ecosystem is a key link in the development and application of ubiquitous operating system. Aiming at the Internet of Everything, combined with the new characteristics of ubiquitous operating system, this study summarizes the constituent elements and system model of ubiquitous operating system open source ecosystem, and puts forward the construction method of ubiquitous operating system open source ecosystem. This study provides new ideas to promote the iterative innovation of ubiquitous operating system, integrate the isolated island of ubiquitous operating system open source ecosystem, and promote the preliminary practice and collaborative development of …

From Policy Promotion To Research Output: Brief Analysis Of Technical Challenges Of Hospital-Led Artificial Intelligence Research, Yu Zhuang, Cheng Zhou

Bulletin of Chinese Academy of Sciences (Chinese Version)

In recent years, artificial intelligence has become a key direction of medical and health-related research and a hot spot of international competition. In order to investigate the current situation and challenges in hospital-led artificial intelligence researched, this study selects 14 national pilot hospitals to promote the high-quality development of public hospitals as samples, adopts a combination of quantitative and qualitative methods, analyzes the research articles related to artificial intelligence published by the sample hospitals in recent years, and analyzes the technical challenges in the hospital-led artificial intelligence research. The results show that although the number of hospital-led artificial intelligence research …

Welding 3d Printed Structures For Composite Sacrificial Tooling, Dominic L. Perez, Kyle Gerold, Matt K. Ficker, Matthew D. Wooden, Aidan M. Dungy, Brennan G. Coit

Research & Creative Achievement Day

3D printed parts offer the ability to generate dimensioned, complex objects with minimal machining touch time and skill, but they are typically very weak and limited in size. Strong and light composite parts require tooling to be created for the fabric to lay on while the resin is curing, but tooling can be quite expensive during the prototyping phase or for low part quantity runs. This study examined the techniques required to weld smaller 3D printed parts together to form large 3D printed tools that could be used as a sacrificial tool for a composite part. In this method, the …

Carbon Cornhole, Justin O. Dailey, Blake M. Endle, Joshua J. Lebrun, Bailey J. Banaszynski, Josiah M. Gleisner

Research & Creative Achievement Day

The purpose of this design project is to create a durable lightweight yard game for players of all skill levels. Carbon Cornhole is a composite improvement on the already popular yard game, cornhole, with a new twist. The final product is based on valued feedback from customers. The board is manufactured of carbon fiber/epoxy sandwich panels with a closed cell foam core. The composite design provides a lightweight product. The panels are specifically manufactured to retain their mechanical properties when exposed to outdoor elements such as water and UV radiation. The addition of inlayed LED lights and two new "skill …

Flexural Creep Comparison To Tts Creep For Pp And Pp-Gf30, Max R. Kauphusman, Regan G. Harvey

Research & Creative Achievement Day

Creep testing is one of the most expensive datasets to acquire in both cost ($10k+) and time (2+ months). Dynamic Mechanical Analysis offers a unique opportunity to characterize creep properties of polymers using a technique called Time Temperature Super Positioning (TTSP) in a relatively short period of time. TTSP works by holding either frequency or loading constant at set temperatures for a constant period of time. WLF equations are then used to combine multiple curves from different temperatures into a master curve that can be used to extrapolate out creep performance at designated reference temperatures and save a considerable amount …

The Lagrange Logistics Method, Jeffrey Rogers

Space Studies Student Publications

Human development into different environments has always required logistics support to sustain life, focusing this research on one method in supporting interplanetary missions beyond Earth. It explores utilizing stations in Lagrange orbital points within the solar system, analogous to transcontinental hubs for logistics operations in an emerging domain. The evaluation considers available Lagrange points, environmental considerations including available resources, flight distances and time in comparison to current interplanetary flight, potential risks, and possibilities beyond the immediate future to determine the practicability of this method. To determine this, a qualitative descriptive analysis method is employed. Data was collected through historical accounts, …

Exploring The Impact Of Hour Of Code On Students' Cs Interest And Perceptions, Jessica Marie Yauney

Theses and Dissertations

As the focus on computer science in K-12 classrooms grows, the 'Hour of Code' program has also grown. As Hour of Code is one of the largest educational campaigns, it is worth evaluation to ensure effects are well understood so that implementation can be made most effective. This research sought to better understand the impact of Hour of Code. This thesis presents findings from a systematic review and from a quasi-experimental study. A large number of research articles have been published on Hour of Code. Systematic review identified 64 papers including reports from experiments testing the efficacy of Hour of …

Counterventions: A Reparative Reflection On Interventionist Hci, Rua Mae Williams, Louanne E. Boyd, Juan E. Gilbert

Engineering Faculty Articles and Research

Research in HCI applied to clinical interventions relies on normative assumptions about which bodies and minds are healthy, valuable, and desirable. To disrupt this normalizing drive in HCI, we define a “counterventional approach” to intervention technology design informed by critical scholarship and community perspectives. This approach is meant to unsettle normative assumptions of intervention as urgent, necessary, and curative. We begin with a historical overview of intervention in HCI and its critics. Then, through reparative readings of past HCI projects in autism intervention, we illustrate the emergent principles of a counterventional approach and how it may manifest research outcomes that …

Semi-Differentiation Of Reversible, Soluble-Insoluble Potential Sweep Voltammograms, Tyler Williams, Ranon Fuller, Cameron Vann, Devin Rappleye

Faculty Publications

Semi-differentiation, or convolution as it is sometimes known, is a mathematical technique commonly used to disentangle overlapping peaks in cyclic or linear sweep voltammograms. However, this technique is often misapplied due to misunderstandings of fractional calculus. Additionally, rigorous treatment and validation of the theory of semi-differential analysis of reversible, soluble-insoluble electrochemical reactions is lacking. Peculiarities of semi-differentiation are explored; theoretical relations for semi-differentiated voltammograms are given; the exponential nature of the theoretical curve is explored; theoretical relations are compared to experimental voltammograms for AgNO₃ in 1 M nitric acid at 298 K, NiCl₂ in LiCl at 974 K, …

Testing Methodologies And Results Of Radiation Induced Soft Errors For A Cots Sram, Fram, And Soc, Wesley Raymond Stirk

Theses and Dissertations

Methods for testing commercial off-the-shelf (COTS) digital devices at varying levels of complexity is presented and discussed as well as the results for testing a COTS SRAM, FRAM, and SoC using these methodologies in a pulsed dose rate environment at Little Mountain Test Facility (LMTF) and neutron testing at Los Alamos Neutron Science Center (LANSCE). Investigations at LMTF revealed a dependence in all three devices on the integrated dose of a single pulse of radiation, implying that the duration of radiation plays a significant role in the response. The test infrastructure necessary to dynamically access an FRAM at LMTF and …

Rfssw Behavior Prediction Using A Numerical Model, Evan Robert Berger

Theses and Dissertations

A two-dimensional axisymmetric thermo-mechanical model of the Refill Friction Stir Spot Welding (RFSSW) process was developed and validated with experimental data. Welding temperatures, tool forces, and material flow including defect formation, were accurately predicted by the model. Qualified repair techniques are critical for successful implementation of a welding process for use on large weldments with a significant number of spot joints, and this work demonstrates a repair technique for RFSSW that is validated both experimentally and numerically. Repaired properties are shown to exceed 90% of the original mechanical properties of the RFSSW process. RFSSW has different process parameters for every …

Novel Block Grid Analysis (Bga) Based Algorithm For Use In Determining Coefficients Of Similarities Between Uv Fluorescent Spectra, Kevin N. Mellon Dr, Noel Carey Mr

Articles

This paper presents a novel computational process used for determining matching coefficients for optical spectra either in real time or from a database. This simple algorithmic method is capable of outputting a set of coefficients relating to comparative matching datapoints and to a weighted similarity ratio between spectra whilst still maintaining high computational efficiency due to the minimization of floating-point calculations. The process works as effectively on signal data during real time processing or on images of spectra which may be stored in a database. A subset of the algorithm has already been used very effectively in an embedded mobile …

Spectral Fatigue Behavior Of Az31 Magnesium During Variable Loading, Manuel Figueroa Gomez, Daniel Kenney

Liberty University Research Week

Undergraduate

Applied

Position And Energy Controlled Impact Treatment For Increasing Strength And Ductility In Stainless Steel, Samuel Scott

Liberty University Research Week

Graduate

Applied

Carbon Fibers Recycling From Degraded Prepregs And Mechanical Properties Or Recycled Composite, Monjur Morshed Rabby, Minhazur Rahman, Partha Pratim Das, Vamsee Vadlamudi, Rassel Raihan

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

The size of the global composites market is anticipated to grow more than previously. Due to the rapidly rising volume of CFRP production, the waste from this material poses numerous problems and has significantly increased the socio-technological pressure to find sustainable composite recycling solutions. The problem is that recycling the composite part is challenging once its service life has expired. The same problem is true for the raw materials (prepregs) used in composite manufacturing. When the prepreg out-life/shelf-life is over, prepregs are abandoned, resulting in a loss of millions of dollars and an adverse environmental effect. In this study, the …

Machine Learning Technique For Damage Detection Of Rails On Steel Railroad Bridges Subjected To Moving Train Load, Md Masnun Rahman, Mohsen Amjadian, Mahesh Pokhrel, Constantine Tarawneh

Civil Engineering Faculty Publications

Rail is one of the key elements of the railway system, and its role is to transmit the wheel load to the track bed and guide the train cars along the track. Rail is susceptible to rolling contact fatigue and wear due to being repeatedly subjected to the moving load of the train. This can eventually result in broken-rail damage and train derailment, which if happens on a railroad bridge, it can severely damage the bridge, such as the structural failure of the Tempe Town Lake steel railroad bridge in July 2020 that costed $11 million to repair. Therefore, early …

Strength And Durability Of Plastic Clays Treated With Cement Or Lime, Tyler D. Mickelson

Theses and Dissertations

The objective of this research was to compare the efficacy of portland cement to that of lime for improving the strength and durability of plastic clays. The scope of work associated with this research involved laboratory strength and durability testing of three plastic clays treated with portland cement or lime. To ensure a broad application of the work, the clays were obtained from three different regions of the United States, specifically from project sites near Bloomington, Indiana; San Antonio, Texas; and Monticello, Utah. Laboratory testing included evaluation of selected properties of the three clays in the untreated condition and in …

The Impact Of Solution Ionic Strength, Hardness, And Ph On The Sorption Efficiency Of Polychlorinated Biphenyls In Magnetic Nanocomposite Microparticle (Mnm) Gels, Angela M. Gutierrez, Thomas D. Dziubla, J. Zach Hilt

Chemical and Materials Engineering Faculty Publications

Environmental conditions of groundwater and surface water greatly vary as a function of location. Factors such as ionic strength, water hardness, and solution pH can change the physical and chemical properties of the nanocomposites used in remediation and the pollutants of interest. In this work, magnetic nanocomposite microparticle (MNM) gels are used as sorbents for remediation of PCB 126 as model organic contaminant. Three MNM systems are used: curcumin multiacrylate MNMs (CMA MNMs), quercetin multiacrylate MNMs (QMA MNMs), and polyethylene glycol-400-dimethacrylate MNMs (PEG MNMs). The effect of ionic strength, water hardness, and pH were studied on the sorption efficiency of …

Considering The Influence Of Coronary Motion On Artery‑Specific Biomechanics Using Fluid–Structure Interaction Simulation, Nicholas A. T. Fogell, Miten Patel, Pan Yang, Roosje M. Ruis, David B. Garcia, Jarka Naser, Fotios Savvopoulos, Clint Davies Taylor, Anouk L. Post, Ryan M. Pedrigi, Ranil De Silva, Rob Krams

Department of Mechanical and Materials Engineering: Faculty Publications

The endothelium in the coronary arteries is subject to wall shear stress and vessel wall strain, which influences the biology of the arterial wall. This study presents vessel-specific fluid–structure interaction (FSI) models of three coronary arteries, using directly measured experimental geometries and boundary conditions. FSI models are used to provide a more physiologically complete representation of vessel biomechanics, and have been extended to include coronary bending to investigate its effect on shear and strain. FSI both without- and with-bending resulted in significant changes in all computed shear stress metrics compared to CFD (p = 0.0001). Inclusion of bending within …

Veterans Memorial Park In Colon, Mi, Madelyn Landry

Honors Theses

Located in St. Joseph County, MI, the Village of Colon offers a charming small-town feel and a close connection with nature. For this project, our team will be working to create a new design for a small community park located in the downtown area of Colon along the shores of Palmer Lake. The American Legion is seeking to re-imagine the park into a Veterans memorial to celebrate the service of village residents who have served in the armed forces. Elements requested to be incorporated into the memorial include granite stonework with etched displays, flags for each branch of the military, …

Air Pre-Heat System Optimization For Flash Dryers, Sophia Louden

Honors Theses

Primient, a leading producer of food and industrial ingredients made from plant-based, renewable sources is the industrial sponsor for this project. The company is currently using Plate & Frame Heat exchangers to heat up a 40% by-weight glycol and water solution that is then used to preheat the incoming ambient air. Glycol is being added to reduce the risks of freezing in the system during the winter season. It is important to highlight that this fact affects the heat transfer properties of the liquid overall. Since air heating is a highly energy-demanding process, an outlet stream of hot water produced …

Design And Implementation Of Test Stand Upgrades For Investigating Gearset Churning Losses With Baffles, Matthew Martin

Honors Theses

The automotive industry is continually researching ways to decrease energy losses in drivetrain applications. Rotating gear sets in an oil bath suffer frictional losses due to oil churning. The Center for Advanced Vehicle Design and Simulation (CAViDS) consortium has proposed studies to understand and reduce these churning losses. The primary means to reduce these churning losses are to redirect the oil flow using baffles and/or alter the oil viscosity. To perform churning loss optimization under controlled conditions, an existing test stand was upgraded to improve safety, introduce oil temperature control, and allow for the interchange of baffle designs. For safety, …

Api Drying And Packaging Technology Upgrades, Destiny Washington

Honors Theses

Certain classes of active pharmaceutical ingredients (APIs) require higher levels of containment during handling. This project explores upgrades and new technology to improve currently used systems. The upgrades will include containment during drying and packaging while maintaining required ergonomic, industrial health, and GMP requirements. Design of this system and a full economic analysis have been performed for these upgrades.

This project details the profits and costs that are associated with the conversion of the API drying process from a batch process to a semi continuous process using an agitated thin film evaporator. The implementation of the new equipment is expected …

Optimization Of Material Flow Of Woodshop Through Layout Redesign, Madison Wegner

Honors Theses

A local high-design outdoor site furniture company – Landscape Forms – worked with the senior design team to create alternative layouts for the woodshop within the company. This senior project will offer three categories of alternative layouts: short, mid, and long term. By offering multiple time frame layouts, Landscape Forms will be able to implement changes based on time frame and need. A project plan indicates all tasks required to meet these objectives as well as a timeline for accomplishing this plan. Research including worker movement diagrams, stakeholder interviews incorporating woodshop employees and engineers, a man and machine utilization study, …

Thermal Control For A Miniaturized Fabry-Perot Interferometer In A Cubesat, Callie Pilkington

Honors Theses

The evaluation of neutral winds is critical in understanding the ever-changing weather and climate of the thermosphere, which can develop into a hostile environment for satellites. To measure these neutral winds, Michigan Aerospace Corporation is developing a 6U CubeSat that utilizes a miniaturized Fabry-Perot interferometer. For ideal operation, the Fabry-Perot interferometer requires a closely maintained thermal environment. These requirements are crucial in obtaining accurate measurements and for sustaining instrument and mission life due to the vast temperature range experienced in the thermosphere. With the solutions outlined in this proposal, the goal is to provide Michigan Aerospace with an optimized configuration …

Analysis And Mitigation Of Pneumatic Regulator Resonance, Luke Fouch

Honors Theses

Internal resonance in pneumatic regulators can result in heavy leakage, which can lead to less efficient processes. To address this issue, two simulations were developed to simulate pneumatic regulation systems. The first simulation involved deriving a mathematical model of the equations of motion for a regulator and applying it using MATLAB. The second simulation involved developing a Simulink model that incorporated physical regulator properties. To verify the accuracy of both models, physical testing data was used. After verification, the models were modified in various ways to determine the main drivers of resonance in pneumatic systems. Additionally, Finite Element Analysis was …

High Power Rocket Motor Test Bench, Jonathan Wine

Honors Theses

Static ground testing of rocket motors is used to gather performance data and troubleshoot the propulsion system, allowing propulsion engineers to compare actual characteristics to the designed parameters. It is also used in the development and validation of new propulsion systems and alterations to the fuel and oxidizer mixtures. Test benches are used to continuously collect data throughout the burn of a rocket motor, which allows engineers to plot the thrust as a function of time. This plot, a thrust curve, displays several important pieces of information about a rocket motor. This information is crucial to allow astronautical engineers to …

Design Of A Dynamometer Test Platform For Formula Sae Internal Combustion And Electric Powertrains, Ryan Bare

Honors Theses

This dynamometer project was completed for the Formula SAE team at Western Michigan University and aimed to deliver a functional and safe engine dynamometer test stand. Formula SAE is a student organization that designs and manufactures a new formula style race car from the ground up every year to compete at an international collegiate competition. The purpose of the dynamometer is to allow the team to tune their internal combustion (IC) engine and the newly developed electric powertrain (EV). The engine dynamometer is important to the Formula team as it will allow engine tuning and diagnosis prior to the completion …

Conversion Of Biomass To Bio-Fuel Using Fast Pyrolysis With Companion Coal Gasification, Nicholas Hayes

Honors Theses

The objective for this design is to determine the economic benefits of using soybeans to combine biomass pyrolysis with coal pyrolysis processes to reduce the complexity and cost of producing bio-oils. Biomass is produced in multiple industries and is converted to a usable fuel substitute for petroleum. There will be many methods to analyse the pros and cons which will be used for comparison of biomass to bio-oils reactors system which in this case would be soybeans vs coal gasification.

After thorough research, the team selected a fluidized bed reactor as the main equipment for the fast pyrolysis. The reactor …

Covid-19: Visualized Qualitative Aviation Research Themes, Chien-Tsung Lu, Huabo Sun

Journal of Aviation Technology and Engineering

The purpose of this study is to review pandemic-related publications that help the aviation industry cope with pandemic outbreaks like that of COVID-19. Published documents were searched and downloaded from academic libraries including Web of Science for a qualitative analysis. After the triangulation of publications for decisionmakers, and researchers, all important research clusters were visually generated based on the VOSviewer process. Some research clusters were further discussed for a thorough understanding of existing research perspectives. The result discovered that wearing a face mask and vaccination have been the two most effective means to counteract pandemic outbreaks. Additional findings were extracted …