Engineering Commons^™

Investigating Haloacetonitrile (Han) Formation Potential From Nitrogenous Antibiotics And Agrochemicals, Kazi Shafayet Haider

UNLV Theses, Dissertations, Professional Papers, and Capstones

Disinfection can promote safe drinking water. Chlorine and chloramines are the two most used disinfectants. While these disinfectants are effective in inactivating disease-causing pathogens, they also produce hazardous byproducts when they react with organic compounds (precursors). Nitrogenous disinfection byproducts (N-DBPs) are more toxic than their counterparts. The increased use of nitrogen-based agrochemicals and antibitics has led to their detection in different water sources. The presence of secondary amine and aniline in these compounds can act as a source of reactive nitrogen to form N-DBPs. In addition, the increased concentration of bromide in water systems due to anthropogenic activities can enhance …

An Investigation Of Soft Electrohydraulic Actuators: Theory, Characterization, And Conceptual Applications, Alexandrea Washington

UNLV Theses, Dissertations, Professional Papers, and Capstones

Electroactive polymer (EAP) materials are a novel soft electromechanical device that exploits the inherent electrical and mechanical advantages of flexible polymer materials. Within this groundbreaking field there are various actuator and sensor devices that have been developed for a variety of applications, from medical devices to artificial biological systems. This research focuses on electrohydraulic actuators, which are comprised of a flexible conductive medium, a dielectric fluid, and a compliant film material to encapsulate the dielectric fluid. This specific study centers around the electrohydraulic EAP actuator known as the Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuator, first introduced by the Keplinger group …

Structure-Property-Processing Analysis Of Graphene Bioscaffolds For Viability And Differentiation Of C2c12 Cells, Lynn Karriem

Boise State University Theses and Dissertations

We investigated the structure – property – processing correlation of graphene bioscaffolds produced using three different methods. Bioscaffolds were prepared by chemical vapor deposition (CVD), sublimation of Silicon Carbide (SiC), and printed solvent assisted exfoliated graphene ink. To gain insight into the roughness and topography of graphene, AFM was performed on each bioscaffold. Raman spectroscopy mapping demonstrated differences in the I_2D/I_G ratio for each scaffold. Young’s modulus was determined by nanoindentation and indicated that epitaxial graphene had the highest average stiffness, followed by CVD, with printed graphene demonstrating the lowest average stiffness. To investigate the biocompatibility of …

Analyzing The Effects Of Rejuvenators In Balanced Mix Design With High Percentages Of Recycled Asphalt Pavement, Amanda Jo Mullins

Boise State University Theses and Dissertations

Interest in sustainable practices have increased in several industries, including civil engineering pavement materials. The incorporation of Recycled Asphalt Pavement (RAP) into new pavement mix design is a popular method of application for sustainable practice and is accompanied by numerous economic and environmental benefits. There is significant interest in using large amounts of this RAP material in pavement design to maximize the benefits, but several problems arise when utilizing “high” amounts of this material (more than 25% RAP replacement) due to aged and oxidized binder that negatively impacts the properties. The use of rejuvenators (RAs) and Balanced Mix Design (BMD) …

Black Phosphorus Ink Formulation For Aerosol Jet Printing, Florent Muramutsa

Boise State University Theses and Dissertations

As the demand for data-driven technologies such as cloud computing, artificial intelligence, and the Internet of Things increases, the value of data centers rises. However, the cost of optical interconnects that convert optical signals to electrical signals and vice versa limits the bandwidth in these data centers. Historically the optoelectronic materials of group III–V semiconductor materials are grown using epitaxy and transferred to silicon microelectronics using robotic pick-and-place technology. This costly method restricts the large-scale production of on-chip optoelectronic components such as diodes, photodetectors, and lasers. In this dissertation, we investigated the potential of black phosphorus (BP) as a material …

Comparing 1d, 2d, And 3d Hydraulic Models In Urban Flooding Applications, Taylor Kesler

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Floods have been a hazard to people since people first started building near rivers. Predicting floods can be very beneficial to save lives and property. Computers have made it possible to solve fluid dynamics equations in a fast and efficient manner. Computer programs have been designed to solve these equations and create digital models of floods.

This study compares three different methods of computer modeling and explores their advantages and disadvantages. One-dimensional models solve fluid equations by setting up a series of cross sections. Two-dimensional models use a grid-like mesh to solve fluid equations from one cell to the next. …

Estimating Seasonal Crop Water Consumption In Irrigated Lands Using Soil Moisture And Reference Evapotranspiration, Oliver Henry Hargreaves

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The increase in population and the megadrought that the American west has been experiencing for the past two decades and for the foreseeable future are the cause of great stress on the region’s water resources. In an effort to mitigate the worst effects of water shortages many public and private agencies have been pursuing ways to reduce water use while maintaining the current status quo of living standards, industrial productivity, and agricultural yield. This project aims to study water use in irrigated lands dedicated to agriculture with the objective of quantifying crop water use, often referred to as evapotranspiration (ET), …

Improved Sustainability And Efficiency Of Partial Depth Concrete Bridge Deck Repair, Israi I. H. Abu Shanab

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Recently, significant advances have been made in the development of rapid setting cementitious materials for partial depth bridge deck repair. The rapid set times of these materials allow for traffic to be re-opened onto the bridge deck in several hours versus days once the material has been placed. While this is a substantial improvement in reducing the traffic closure time, a large amount of time is still spent on the removal of damaged and deteriorated bridge deck and in preparing the concrete cutouts for placement of the rapid set material. Partial deck removal is a much more delicate process than …

Low-Erosion Nozzle Materials For Long-Duration Hybrid Rocket Burns, Russell S. Babb

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hybrid rocket systems, which employ a solid fuel grain and a liquid oxidizer, are a low-cost and environmentally friendly alternative to traditional rocket systems. However, hybrid rockets suffer from an increased nozzle throat erosion rate, which impacts motor performance and reliability. To address this issue several materials and low-erosion nozzle configurations were tested. The results of the testing campaign produced a nozzle that reduce the throat erosion rate five-fold.

The Active Cryocubesat Technology: Active Thermal Control For Small Satellites, Lucas S. Anderson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Modern CubeSats and Small Satellites have advanced in capability to tackle science and technology missions that would usually be reserved for more traditional, large satellites. However, this rapid growth in capability is only possible through the fast-to-production, low-cost, and advanced technology approach used by modern small satellite engineers. Advanced technologies in power generation, energy storage, and high-power density electronics have naturally led to a thermal bottleneck, where CubeSats and Small Satellites can generate more power than they can easily reject. The Active CryoCubeSat (ACCS) is an advanced active thermal control technology (ATC) for Small Satellites and CubeSats, which hopes to …

Groundwater-Surface Water Interaction To Increase Groundwater Availability, Saeid Masoudiashtiani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study develops procedures for using surface water to increase groundwater availability and sustainable yield, and for evaluating impacts on surface water. Increasing sustainable groundwater yield requires reducing the gap between the volumes of discharge from versus recharge to an aquifer. The study presents procedure for water user(s) to help increase groundwater availability. Toward that end, this study simulates and evaluates: a) aquifer storage and recovery (ASR) of water diverted from Red Butte Creek in Salt Lake Valley, Utah for subsequent turf irrigation; b) ASR injection of residential runoff from daily rainfall for subsequent extraction to irrigate turf; and c) …

Laboratory Modelling Of The Various Components Of Backward Erosion Piping Behavior Due To Converging Flow With Different Constricted Outlets, Ibrahim Ahmed Abdelmotelb Ibrahim

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Backward Erosion Piping (BEP) is an internal erosion mechanism which occurs at the down stream of dams or levees. Two conditions needed for this failure to occur: 1) head of water in the upstream of the dam or the levee to drive the seepage forces, and 2) crack in the roof or the blanket layer of the cohesionless material in the downstream of the dam or a levee. Numerous researches were performed in the past in an attempt to predict the critical gradient for BEP to initiate. Some researches are too conservative and other researches are under predicting the critical …

Aerodynamic Implications Of A Bio‐Inspired Rotating Empennage Design For Control Of A Fighter Aircraft, Christian R. Bolander

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation presents an analysis of the aerodynamics for an aircraft using a novel, bio-inspired control system. The control system is a rotating tail, that is inspired by the way in which birds use their tail to control their flight. An aerodynamic model for a baseline aircraft and a bio-inspired variant are created by referencing well-known relationships for the aerodynamics of flight, which are then used to analyze the available flight envelope at which each aircraft can reach two different equilibrium states. An analysis of the total aerodynamic control authority of each aircraft is also included along with a preliminary …

Locating Low Head Dams Using A Deep Learning Model In Arcgis Pro With Aerial Imagery, Caitlin R. Arnold

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Low Head Dams are man-made structures that span the width of a river and allow water to flow over them. Although these structures vary in age and original purpose, some pose a life-threatening danger when recreationalists are entrapped in the reverse current at the toe. Despite these dangerous structures causing many drowning deaths in the USA each year, most low head dams do not have safety regulations and remain unknown to those charged with dam and public safety. Thus, to improve public safety at these structures, the first step is to fully inventory low head dams, so that subsequent efforts …

Probabilistic Verification For Modular Network-On-Chip Systems, Jonah W. Boe

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Modeling physical systems with formal analysis tools can help in the design of more fault-proof systems, by helping to determine if unpredictable or unwanted behavior may occur. Probabilistic verification further advances such processes, by providing quantitative information about the system. More complex systems can especially benefit from formal modeling and verification, as testing the physical system in every possible condition manually, can be extremely complex, and often impossible.

There is a growing interest in the application of Network-on-Chip (NoC) systems. NoCs can help simplify communication between the subsystems of many technologies, including the ever more complex multicore processors being produced. …

Viability And Performance Of Rf Source Localization Using Autocorrelation-Based Fingerprinting, Joseph L. Ipson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Finding the source location of a radio-frequency (RF) transmission is a useful capability for many civilian, industrial, and military applications. This problem is particularly challenging when done “Blind,” or when the transmitter was not designed with finding its location in mind, and relatively little information is available about the signal before-hand. Typical methods for this operation utilize the time, phase, power, and frequency viewable from received signals. These features are all less predictable in indoor and urban environments, where signals undergo transformation from multiple interactions with the environment. These interactions imprint structure onto the received signal which is dependent on …

Communication‐Less Synchronous Rectification For In Motion Wireless Charging, Joshua B. Larsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis puts forward a control scheme to allow for synchronous rectification for dynamic wireless power transfer. The automotive industry is transitioning away from internal combustion engines (ICEs) and towards electric vehicles (EVs). This transition is spurred by the environmental and economic benefits EVs offer over ICEs. However, further improvements can still be made to how electric vehicles operate. One of these improvements is the technology of in motion wireless charging or dynamic wireless power transfer. In motion wireless charging offers the ability to remove existing range anxiety concerns for EVs. It also offers the potential for a reduction in …

Top Mat Reinforcement Alternatives For Concrete Pavement Slabs With Embedded Inductive Power Transfer Systems, Thaddeus J. Hansen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electric Vehicles (EVs) are continually becoming a larger portion of the vehicular fleet on a national and global level. Despite their growth in popularity, several challenges still exist that hinder the practicality and general public’s acceptance of EVs. The limited travel range of EVs, lack of consistent charging stations, and required time to charge EVs are at the forefront of these challenges. The use of Inductive Power Transfer Systems (IPTS) may be part of the solution to the afore mentioned issues.

IPTS embedded in concrete pavement panels allow EVs to charge their batteries while in motion. In order to justify …

The Influence Of Surface Roughness Frequency On Rotating Sphere Aerodynamics, Jack C. Elliott

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Solving the problems of increasing highway fuel efficiency, throwing a better curve ball, and preventing an aircraft from stalling all have a common thread: controlling flow separation. Defined by the fast moving flow around an object detaching from the object, flow separation has implications for a broad number of engineering fields. Research regarding flow separation control has led to the understanding that the easiest method for delaying flow separation for a given shape is to vary how turbulent the flow around the object is. Varying this turbulence around an object may be achieved through various methods including changing the …

Producing Analytical Models Of The Sport Spacecraft For Science Data Processing, Jason L. Powell

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Scintillation Prediction Observation Research Task (SPORT) is a joint United States of America and Brazil 6U CubeSat mission. The SPORT mission is to understand how the Earth’s ionosphere evolves during day and night transitions. Space Weather Probes, a suite of instruments developed by Utah State University, monitors the ionosphere by observing currents and voltages around the SPORT spacecraft body. This thesis presents the data collected by Space Weather Probes and how it is used to measure the ionosphere. Modeling techniques are also presented to demonstrate how the Space Weather Probes instrument is expected to respond to the ionosphere.

Correlation Of Intracellular Metabolites With Optical Metabolic Imaging In Polarized Macrophages As Indicators Of Metabolic Reprogramming, Abby Claire Denison, Shelby Bess

Biomedical Engineering Undergraduate Honors Theses

Macrophages are a type of immune cell that are characterized by their ability to differentiate into various active phenotypes based on environmental stimuli. They can generally be classified as one of two extremes: inflammatory/M1 or wound-healing/M2. Macrophage populations in vivo, however, are rarely homogenous, and since macrophages play vital roles in the immune response, particularly in the context of the tumor microenvironment (TME), it’s important to be able to investigate and understand heterogenous macrophage populations to develop more effective treatments. Recently, autofluorescence imaging such as multiphoton microscopy and fluorescence lifetime imaging microscopy (FLIM) of metabolic cofactors NADH and FAD have …

Comprehensive Long- And Short- Read Sequencing Approaches To Screen The Mutational Landscape After Therapeutic Crispr-Editing For Duchenne Muscular Dystrophy, Mary Jia, Made Harumi Padmaswari, Landon Burcham, Shilpi Agrawal, Alexis Ivy, Abbey Bryan, Christopher E. Nelson

Biomedical Engineering Undergraduate Honors Theses

Duchenne muscular dystrophy (DMD) is an X-linked muscle wasting disease caused by mutations in the Dmd gene resulting in non-functional dystrophin. Adeno-associated virus (AAV)-mediated delivery of classical CRISPR systems resulting in double-stranded breaks (DSBs) has yielded promise as a curative DMD therapeutic. However, the consequences of AAV-CRISPR require more thorough characterization. PCR-enriched short-read amplicon sequencing at cut sites is the most common method of sequencing CRISPR editing, but PCR bias results in unreliable quantification of on-target edits. We analyze orthogonal long- and short-read sequencing approaches to screen the outcomes of CRISPR technologies at the DNA and RNA-level for DMD. We …

A Wheelchair-Bed Transfer Device For Patients With Limited Mobility, Malachie Nichols

Biomedical Engineering Undergraduate Honors Theses

As the population ages, eldercare becomes more important than ever, yet many caregivers lack the resources they need to safely do their jobs. For those who take care of a disabled loved-one at home or work as home health aides, basic tasks can be frustrating and even dangerous. The high physical demands of moving and lifting patients make injuries common among home health care workers. Musculoskeletal injuries to the back, shoulders, wrists, and hands are especially common. The use of transfer devices such as Hoyer lifts, slide boards, and gait belts help to make moving patients easier and safer, but …

Preferences Toward Augmented Reality Technologies For Pedestrian Navigation, Victoria Alejandra Diaz Mejia

Theses and Dissertations

This research investigates the demand for pedestrian navigation supported by augmented reality (AR) via headset and mobile technologies by evaluating factors specific to each technology and the decision makers. Recent advances in digital engineering systems, e.g., digital twins and smart cities, are enabling new services like AR-supported wayfinding for pedestrians. Still, it is unknown whether American pedestrians would use AR, the type devices and feature that add value to their navigation, the demographic profiles more inclined to AR wayfinding, and the sensitivity of such demand to software and hardware cost. As the first investigation addressing the demand for AR pedestrian …

Understanding The Effectiveness Between Modern Technologies And Traditional Training Methods Of E-Learning On An Individual’S Learning Curve, Content Retention, And Satisfaction, Andressa Camacho Ortiz

Theses and Dissertations

E-learning has become a widespread and valuable tool for skill development. After the COVID-19 pandemic, the necessity and adaptability of this method increased drastically. Hence, numerous studies focused on understanding the effectiveness of this method. The academic literature highlights the need to explore alternative solutions that can increase a learner’s content retention and satisfaction when learning remotely. Modern technologies can be a great solution for this need with the correct application and development. This thesis analyzes the effects of technology on content retention, satisfaction, and learning curve through the following technologies: online platform, virtual reality (VR), and hologram display. A …

The Examination Of Factors That Influence Trust In A Multi-Agent Team Context, Cherrise Ficke

Theses and Dissertations

Current dyadic teams in the human-agent teams literature demonstrates that Propensity to Trust in Technology (PTT), previous experience with an agent, levels of autonomy (LOA), workload, and mission performance affect trust and mission performance to some capacity. However, the purpose of this study was to expand this line of research by examining how these factors influence trust and mission performance in a multi unmanned aerial vehicle (UAV) context. To investigate the relationship between these factors and trust, an archival study was conducted using data from a previously-conducted, multi-UAV study. The previous study utilized a within-subjects repeated measures design in which …

Disaster Resilience In Air Traffic Control: Recovery Of Airspace Activity At U.S. Primary Airports That Experience A Catastrophic Hurricane, Victoria Thorpe

Theses and Dissertations

The purpose of this study was to investigate the relationship between U.S. airport characteristics, hurricane strength, and hurricane proximity and the time it takes airspace activity to recover to normal after experiencing a catastrophic hurricane. It determined the relative influence of five airport characteristics and two hurricane characteristics as predictors of time for airspace activity to recover to normal. The result is a predictive airport disaster resilience equation to estimate the expected airport recovery rate for a forecasted catastrophic hurricane. This supports expectation management for aviation practitioners. This is significant for air traffic controllers because post-hurricane airspace is unpredictable, demanding, …

Characterizing Endothelial Damage During Ischemic Stroke Treatment With 3d Cerebrovascular Live Cellular And Finite Element Models, Ana Regina Martinez Dehesa

Theses and Dissertations

Stent retriever mechanical thrombectomy (SRMT) is part of the clinical standard-of-care for acute ischemic stroke (AIS) patients with large vessel occlusion (LVO). Endothelial injury (EI) is widely associated with SRMT. Studies report finding EI markers in over 50% of retrieved clots, suggesting the frequency of EI in MT patients is rather common. The mechanism of EI and its contribution to MT failure and clinical outcomes remain poorly understood because of a lack of techniques to observe EI and study it in vitro. This study aims to investigate the mechanisms of EI induced by SRMT, as well as the effect stent …

The Effect Of Biodiesel Blend Composition On Jet Aircraft Airframe Fuel System Components & Materials, Elise Aurora Medhus

Theses and Dissertations

In the aviation industry, biodiesel is a clean-burning alternative to petroleum-based jet fuel and has been shown to reduce particle emissions from aircraft engines. This thesis studies the impact of biodiesel on aircraft airframe fuel system components & materials with corrosion-resistant surface treatments. The goal is to identify areas for optimization to increase the use of higher blends in jet aircraft engines to further reduce emissions. The work performed involved testing the corrosion resistance of several aluminum samples, steel samples, and non-metallic materials in numerous biodiesel blends ranging from B05 to B100. The testing method used was the Assessment of …

Modeling Of Turbulent Flow In Pipe Systems With Compound Bends, Stella Smithe

Theses and Dissertations

A practical CFD k-epsilon realizable model is applied to four pipe systems with various 90° bend configurations to examine velocity profile evolution and total pressure losses within the pipe systems. The pipe systems compared are a configuration with a single 90° L-bend, as well as three additional pipe configurations composed of dual 90° bends, all with total length x/D=16.7. The dual bend configurations studied are: a 180° turning U-bend, a 0° total turning S-bend, and a dual 90° out-of-plane, compound C-bend. The CFD model was benchmarked against experimental data from a straight pipe and a pipe configuration with a single …