Engineering Commons^™

Effect On Focusing Fields By Ferromagnetic Cell Cores In Linear Induction Accelerators, Cooper Guillaume

Senior Honors Theses

In the Los Alamos National Laboratories DARHT facility, there are two perpendicular linear induction accelerators, LIAs. The LIAs’ solenoids produce magnetic fields which focus the electron beam. Simultaneously, the accelerating pulse creates a magnetic field. These two field intensities act upon a ferromagnetic material in the cells to enhance magnetic flux density. Due to the nonlinearity of the material, this flux density will reach a saturation point. In turn, the magnetic field intensity of the axial solenoidal magnetic field will be affected and slightly altered. The width of the electron beam will increase, causing a decrease in effectiveness. Through simulation, …

The Impact Of Flight On Cabin Crew Wellness: A Literature Review, Ashleigh Roderick

Senior Honors Theses

Since its conception in 1903, aviation has captivated the attention of people across the globe and has been utilized in many sectors of society. Aviation related occupations pose a unique set of risks to those working in the field, health risks being one of the most prominent. Cancer, cardiovascular disease, musculoskeletal ailments, and genetic damage have all been studied as potential consequences of working in the aviation industry, as some studies indicate a higher prevalence of these issues in aviation employees. Apart from physiological issues, mental health issues have also been observed in those working in aviation. Mental health issues …

The Development And Use Of The Probabilistic Financial Decision Model For A Company Expansion, Elizabeth Wiese

Senior Honors Theses

In the United States, companies are expanding constantly. However, in an industrial equipment dealership expanding into a new state, it is important to understand the industry, new market, and costs associated with expanding. With using financial statements of data-backed percentages for growth, research seeks to set up a financial model to see if expansion for an industrial equipment dealership into the state of North Carolina will be a financially wise decision. Wesley Worldwide, an industrial equipment dealership, is moving forward with the investment of expanding into North Carolina. However, it is vital to understand the financial predictions for profit return …

An Exploration Of The Application Of Desalination In Disaster Relief, Emma Sager

Senior Honors Theses

This paper aims to explore the application of small-scale desalination systems to provide clean water in the wake of marine natural disasters. A lack of clean water is a devastating impact of many natural disasters. Desalination technologies, both thermal and membrane, show potential for being scaled down and self-powered by renewable energy. Desalination can transform ocean water and contaminated drinking water with a high salt content into drinkable, usable water. While these techniques are not perfected, and the solution to a need for clean water is multifaceted, desalination shows potential. Through further research and ever-advancing technology, small-scale desalination could develop …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Self-Powered Triboelectric Mems Accelerometer, Mohammad Alzgool, Yu Tian, Benyamin Davaji, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

A self-powered triboelectric accelerometer miniaturized to the micro-scale is presented. This micro triboelectric accelerometer (MTEA) was fabricated using CMOS-compatible processes. The design followed the triboelectric nanogenerators made in meso-scale and operates in the contact-separation mode. The scaled-down, multilayer design enabled fabrication using microelectromechanical systems (MEMS) technology. The MTEA was made using an aluminum and polyimide triboelectric pair that generated charges on the contact. A square movable plate that is 2 mm x 2 mm was fabricated with 1 μm thickness. Then, the fabricated MTEA was excited by a mini-shaker at known frequencies (0.1–7 kHz) and accelerations (1–10 g), and the …

Markov Chain Analysis Comparison, Thomas Robert Prouty

Undergraduate Honors Capstone Projects

This Honors Capstone was proposed as a method to develop a greater understanding of modern model-checking tools. To do this the student chose to analyze and compare the results of the tools Prism, Storm, and Stamina. To evaluate the effectiveness of each tool, comparisons were made of the results for running each tool on a simplified communication network.

The simplified communication network model used was a CTMC (Continuous-Time Markov Chain) model that employed correct signal transitions and erroneous bit flipping transitions. This was done in an effort to simulate possible errors and faults that can occur between a provider and …

Level 3 High Powered Rocketry Certification Through Tripoli Rocketry Association, Zachary Foster

Undergraduate Honors Capstone Projects

This paper aims to give an overview of the Level 3 certification process through the TRIPOLI Rocketry Association. This paper will also give an overview of Zachary Foster’s Level 3 Certification submission. The overview of the certification submission will include fin flutter calculations, stability calculations, descent rate calculations, flight simulations, flight results, construction overview, drawing package for the airframe, and pre-flight checklists. The results of fin flutter calculations showed that the minimum flutter speed is 1972 ft/s. The maximum flight velocity is 1309.6 ft/s. The flutter calculation has a total factor of safety of 1.5. The stability calculations show a …

Fatigue Performance Of Flexural Retrofits For Precast Slab Bridges, Ian Stewart

All Theses

This thesis discusses flexural and cyclic load testing of two potential retrofits for pre-cast slab bridges. These slabs came from South Carolina Department of Transportation (SCDOT) decommissioned bridges as a part of an ongoing project with SCDOT. The first is a Carbon Fiber Reinforced Plate (CFRP) retrofit where four CFRP plates were adhesively bonded to the bottom of a slab. The second is a steel plate that was mechanically attached to the bottom of a slab using bolted connections. The bolts were cast into grouted holes in the slab. To better understand the failure mode of these retrofits and their …

Impacts Of Preferential Flow On Tc-99and Np-237 Vadose Transport In Soils At The Savannah River Site, Josh Parris

All Theses

Since the 1950s, the United States has produced approximately 90,000 metric tons of spent nuclear fuel (SNF) (Office of Nuclear Energy, 2022); however, no long-term storage solutions are available. Technecium-99 and neptunium-237, two fission products found in SNF, readily form highly mobile species in oxidizing conditions (Hu, 2008; Bondietti, 1979) and have respective half-lives of 2.13 x 10⁵ and 2.14 x10⁶ years (Hu, 2010). Considering these characteristics, ⁹⁹Tc and ²³⁷Np are two risk-driving isotopes found in SNF storage. The process of macropore-facilitated preferential flow, transport through cracks within a soil matrix, has been recognized to increase …

A Study Of A Monolithic Pulsed Fiber Laser With High-Peak And Average Power, Mark Mihalik

All Theses

Fiber lasers with high peak power, pulse energy and average power have numerous industrial applications. This project aimed to build a Master Oscillator Power Amplification fiber laser using commercial components and specialty fiber designed by Clemson University to exceed the power and energy targets of a previous Q-switched fiber laser design. The specialty fiber has a low numerical aperture of 0.028 and a unique geometric core design to minimize amplified spontaneous emission and reduce nonlinear effects in order to produce a high-peak power and high per pulse energy. The two stage, monolithic design targets 3.1 mJ per pulse, average power …

The Characterization Of Atmospheric Turbulence And Its Effect On Laser Beam Propagation, Michael Cox

All Theses

Having a controlled environment to measure atmospheric turbulence is essential to understanding its effects on different laser beam characteristics. The Clemson Variable Turbulence Generator (VTG) has the capability to propagate a laser beam up to 100 m and be able to dial many turbulence settings up to a heat flux of 357 W/m². A high-speed camera, power detector, and high-resolution temperature probes characterize the VTG with theoretical turbulence spectrums. The exponent associated with the Rayleigh-Bénard (RB) temperature structure constant equation is studied. Two different laser beam profiles are used throughout this work: Gaussian and Asymmetric Perfect Vortex (APV). …

Laser Inscribed Graphene Aptasensor For Detection Of Apple Stem Pitting Virus, Yifan Tang

All Theses

Apple stem pitting virus (ASPV) is a latent RNA virus that could cause significant loss to apple production; early-stage field diagnosis could reduce the economic loss caused by ASPV infection. Biosensor is a promising user-friendly detection tool that could transduce biological or chemical interactions into electric signals. Among various types of biosensors, aptasensor, which use aptamers as recognition elements show potential as a high throughput, in-field test. The goal of this thesis is to develop an electrochemical aptasensor testing system for ASPV detection. The quality control study of laser inscribed graphene (LIG) based working electrode of the biosensor was conducted …

Me-Em Enewsbrief, March 2023, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Deep Learning-Based Turkish Spelling Error Detection With A Multi-Class False Positive Reduction Model, Burak Aytan, Cemal Okan Şakar

Turkish Journal of Electrical Engineering and Computer Sciences

Spell checking and correction is an important step in the text normalization process. These tasks are more challenging in agglutinative languages such as Turkish since many words can be derived from the root word by combining many suffixes. In this study, we propose a two-step deep learning-based model for misspelled word detection in the Turkish language. A false positive reduction model is integrated into the system to reduce the false positive predictions originating from the use of foreign words and abbreviations that are commonly used in Internet sharing platforms. For this purpose, we create a multi-class dataset by developing a …

Algae Against Deforestation: Algae Oil As A Potential Palm Oil Substitute, Abiela Meek

Undergraduate Honors Capstone Projects

This capstone project is an effort to pursue sustainability through circular engineering design. With increasing interest in sustainable production of consumer products, creative and multifaceted solutions are the pathway forward to a more circular economy. Palm oil production is a key driver of deforestation worldwide and an unsustainable industry. As palm oil is a large player in the commodities market, evaluating a potential replacement provided a unique opportunity for sustainable circular engineering. High nitrogen and phosphorus concentrations in wastewater are also a cause for environmental concern as they can lead to harmful algal blooms. By utilizing the nitrogen and phosphorus …

The Synthesis And Characterization Of Metal Oxide Nanomaterial-Based Composites And Their Use As Antibacterial Agents, Jo A. Sanchez

Theses and Dissertations

The work presented in this thesis discusses the antibacterial properties of various metal oxides and metal oxide/polymer composite fibers. Polyvinylpyrrolidone (PVP) fibers embedded with Zinc Oxide nanoparticles (ZnO NPs) were prepared by centrifugal spinning from PVP aqueous solutions) and ZnO NPs. The ZnO NPs were synthesized and coated with different surfactants, cetyltrimethylammonium bromide (CTAB) and hexadecyltrimethylammonium bromide (HTAB). The effect of surfactant coating on the antibacterial activity of ZnO NPs and PVP/ZnO nanocomposite fibers against escherichia coli (e. coli) and bacillus megaterium (b. megaterium) bacteria was systematically investigated. The results showed that coating the ZnO NPs …

Piezoresistivity Of Electrically Conductive Asphalt Concrete, Mateo Schmit Mendoza

Theses and Dissertations

Electrically conductive asphalt concrete is considered as a multifunctional construction material due to its structural and non-structural functions. This study aims to investigate piezoresistivity of conductive asphalt concrete. Piezoresistivity is an electrical property of some materials which electrical resistivity changes with induced strain and subsequently, it has the potential for self-sensing smart technology. Graphite Powder F-516 with various contents was added into the asphalt mixtures to impart the electrical conductivity. Electrochemical impedance spectroscopy (EIS) was selected to measure the electrical properties of the specimens in dry and wet conditions, and low and high temperatures. The impedance measurement shows that the …

A Molecular Dynamics Study Of Structural Modifications Of Perarylphosphonium Based Ionic Liquids On The Melting Point, Johnathan Anderson

Graduate Theses and Dissertations (2019 - present)

Several perarylphosphonium based mesothermal ionic liquids (ILs) have been shown to be stable at high temperatures for prolonged periods of time and with high heat capacities making them good candidates for use in many processes such as usage as a heat transfer fluid, as an absorbent for separation of aromatics from aliphatics, and as a solvent for high temperature reactions. Many, however, have melting points above 100^o C, limiting their use. Recently, it was shown that the melting point of an IL can be lowered by simply increasing the dipole moment of the cation or by structurally rigidifying the …

A Novel Deep Learning, Camera, And Sensorbased System For Enforcing Hand Hygiene Compliance In Healthcare Facilities, Samyak Shrimali, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Hospital-acquired infections are a major cause of death worldwide, and poor hand hygiene compliance is a primary reason for their spread. This paper proposes an artificial intelligence, microcontroller, and sensor-based system that monitors and improves staff hand hygiene compliance at various critical points in a hospital. The system uses a Convolutional Neural Network (CNN) to detect and track if staff have followed the WHO hand rub/hand wash guidelines at alcohol dispensers, hospital sinks, and patient beds. The system also uses RFID tags, vibration motors, LEDs, and a central server to identify staff, alert them of their cleaning requirements, monitor their …

A Pwm Method For Reducing Dv/Dt And Switching Losses In Two-Stage Power Converters, Mahima Gupta, Abhijeet Prem

Electrical and Computer Engineering Faculty Publications and Presentations

Today's semiconductor devices are accompanied by high switching frequencies (> kilo-hertz) and small transition times (< micro-seconds). Such fast transition times are accompanied by undesirable effects such as voltage overshoots at the load terminals, ground leakage currents, wide-band electromagnetic noise, etc. With the advent of wide band-gap devices, several applications are moving towards higher switching frequency operation with at-least an order of magnitude reduction in transition times. While these characteristics are considered necessary to break the next-generation barriers in power density, efficiency and applicability, the undesirable effects due to faster transitions are expected to present obstacles. This work proposes a PWM approach to modify the shape of the switching voltages to overcome the disadvantages of the fast transition times without any increase in switching losses. In fact, several of the switching transitions feature ZVS operation, resulting in reduced switching losses. The paper discusses the analytical details of the approach using a simple DC-DC boost-buck converter and extends it to a DC to three-phase AC converter using the principles of space vector modulation. The paper presents detailed simulation and comparative results in terms of voltage over-shoots over long cables, loss calculations and electromagnetic noise. Results from a laboratory-scale working prototype confirm the benefits of the proposed approach in terms of EMI and loss reduction.

Low-Cost Microstereolithography 3d Printing With Microfluidic Microsampling Applications, Lauren Twombly

Chemistry & Biochemistry Undergraduate Honors Theses

The growing field of stereolithography 3D printing has welcomed a new age ofmicrofluidic device fabrication techniques. When compared to previous planar fabrication techniques such as soft-lithography, stereolithography 3D printing offers highly automated procedures, reduced fabrication times, and greater complexity of device features. To date, the greatest tradeoff for 3D printing in microfluidic device fabrication is poorer resolution when compared to soft-lithography which can produce feature sizes on the nanometer scale. The poorer resolution of 3D printing limits the feasible size of features. While highly sophisticated 3D printers are capable of achieving sub 10 μm resolution, these instruments are incredibly expensive …

Study Of The Stability Of Heparin/Collagen Layer-By-Layer Coatings, Hector M. Apodaca Reyes

Chemical Engineering Undergraduate Honors Theses

Pairing heparin with collagen-based medical implants has opened a whole new area of research for enhancing the desired effect of current implants. In fact, heparin (HEP) and collagen (COL) layer-by-layer (LbL) coatings have shown impressive results in forming polyelectrolyte multilayers. It has been already seen on skin grafts, nerve guide conduits (NGCs), and drug delivery devices yielding promising results. Due to being a simple, cost-efficient, and versatile option to fabricate thin biomimetic films, this self-assembly technique is one of the most effective methods to immobilize extracellular matrix (collagen and heparin) onto medical devices and implants. Even though previous studies have …

Measuring Plume Concentration Variations Under Neutral Atmospheric Conditions, Daniel Williams

Chemical Engineering Undergraduate Honors Theses

Hazardous gases are increasingly becoming a large safety concern as the world continues to grow and industrialize. The modeling of when hazardous gases breach containment is an extremely important objective of consequence assessment planning and response. To improve the understanding of the variability inherent in passive gas releases, a test program to demonstrate the variability of gas concentration measurements at different location in a passive gas plume released from an area source in the ultra-low speed wind tunnel at the Chemical Hazards Research Center. A Flame Ionization Detector was used to measure the concentration of the source cloud. Methane was …

Lignin Copolymer Property Prediction Using Machine Learning, Collin Larsen

Chemical Engineering Undergraduate Honors Theses

Lignin, an abundant biopolymer, is a waste byproduct of the paper and pulp industry. Despite its renewable nature and potential applicability in various products, such as plastics and composites, the development of lignin-based materials has been impeded by the cumbersome, Edisonian process of trial and error. This research proposes a novel approach to forecasting the properties of lignin-based copolymers by utilizing a recurrent neural network (RNN) based on the Keras models previously created by Tao et al. Example units of modified lignin were synthesized via esterification and amination functional group modifications. To increase the efficiency and accuracy of the prediction …

Estimating Toxic Load From Finite-Duration Contaminant Releases In Wind Tunnel Experiments, Patrick B. Jones

Chemical Engineering Undergraduate Honors Theses

When gaseous contaminants are released into the atmosphere said contaminants form clouds that travel in the prevailing wind direction. An individual caught in the downwind path of one such cloud will accumulate a dosage, or toxic load, of said contaminant that is dependent on a multitude of environmental factors. This thesis quantifies unpredictability – or variation – in toxic load measurements using downwind concentration data captured from finite-duration gaseous contaminant releases conducted at set conditions in the Chemical Hazards Research Center ultra-low speed wind tunnel.

Finite-duration releases can be divided into two categories – time-limited steady releases and puffs – …

Greenhouse Gas Emissions From Milk Production In The Us, Cailey Cooper

Chemical Engineering Undergraduate Honors Theses

Life cycle assessment is performed to determine the environmental impacts of the life cycle of a product. In this study, the greenhouse gas emissions from milk production in the United States were calculated using a cradle-to-gate analysis. The dairy industry has a noticeable impact on the total greenhouse gas emissions in the US. Performing life cycle assessment provides information about the main emission sources in the life cycle which can spark innovative changes to reduce these emissions. The life cycle assessment was performed using the openLCA software and ReCiPe impact assessment methodology. The results indicated that 1.28 kg of carbon …

Heat Transfer From Plates, Leanza Trevino

Chemical Engineering Undergraduate Honors Theses

The purpose of this honors thesis is to create an experiment for the CHEG Lab I course. This is a continuation of work done by Alexa Moreno. She created an experiment to model free convection of a horizontal plate. In this report, free and forced convection of a vertical and horizontal plate, respectively are modeled. This report explains the motivation for creating this heat convection experiment, the results of performing the experiment, and provides recommendations for future work on this experiment. Lab handouts are included in the Appendix.

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Utilization Of Electrodeionization To Separate And Concentrate Cellobionic And Gluconic Acid, Andie Veeder

Chemical Engineering Undergraduate Honors Theses

Biofuel production is currently an expensive and inefficient process with many drawbacks. It is water and land intensive, competes with food production, and requires large energy inputs decreasing its relative sustainability. This paper explores the use of electrodeionization (EDI) to improve the biofuel process by separating and concentrating large, organic sugar acids that are important materials for the production of bioethanol. An EDI device was assembled for the purpose of separating and concentrating gluconic, cellobionic and lactobionic acid. Several trials were conducted and samples were analyzed to determine the success of this experiment. The results for the separation and concentration …