Engineering Commons^™

Energy-Efficient Operation And Performance Optimization In Computing Systems, Nafis Irtija

Electrical and Computer Engineering ETDs

In the modern world, an expansive range of computing systems are being used, and in all of these systems, energy efficiency and performance optimization are of utmost significance. But performance optimization means different things for different computing systems. Because of their difference in nature, computing systems have different requirements for efficiency and optimization. Distributed systems such as smart-grid systems, edge-computing environments, and blockchain systems focus on the behavior of the agents. Thus, the application of network economics principles, such as Game Theory and Contract Theory, can improve the operation of these systems in a multitude of ways. On the other …

Long-Term Human Video Activity Quantification In Collaborative Learning Environments, Venkatesh Jatla

Electrical and Computer Engineering ETDs

Research on video activity detection has mainly focused on identifying well-defined human activities in short video segments, often requiring large-parameter systems and extensive training datasets. This dissertation introduces a low-parameter, modular system with rapid inference capabilities, capable of being trained on limited datasets without transfer learning from large-parameter systems. The system accurately detects specific activities and associates them with students in real-life classroom videos. Additionally, an interactive web-based application is developed to visualize human activity maps over long classroom videos.

Long-term video activity detection in classrooms presents challenges, such as multiple simultaneous activities, rapid transitions, long-term occlusions, duration exceeding 15 …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Integrated Neutrosophic Best-Worst Method For Comprehensive Analysis And Ranking Of Flood Risks: A Case Study Approach From Aswan, Egypt, Safa Al-Saeed, Nabil M. Abdelaziz

Neutrosophic Systems with Applications

This paper presents a comprehensive framework for the analysis and ranking of flood risks with respect to regional variations and data uncertainties under a Neutrosophic environment. The research introduces a novel approach to flood risk mitigation and management, bringing together the scientifically robust Best-Worst Method (BWM) and single-valued Neutrosophic set for the first time. The unique application of a single-valued Neutrosophic set allows us to better illustrate and manage uncertainty, imprecision, and vagueness in data. Additionally, we employ BWM, a multi-factor decision-making method, for discerning and ranking the most influential flood risk factors. Together, the integrated methodologies provide a balanced, …

Sensor Updates For Bigheaded Carp-Tracking Autonomous Boat, Jordan Kaufmann

Honors College Theses

Bigheaded carp are an invasive species that overpopulate and compete with the native species of Kentucky Lake as well as many other North American aquatic ecosystems. The movement patterns of Bigheaded carp are being studied nationwide by the United States Geological Survey and multiple universities. These studies ultimately seek to control their spread and reduce or reverse the ecosystem destabilization caused by this invasive species. Such studies are currently conducted manually on Kentucky Lake by graduate students affiliated with the Murray State University (MSU) Biology Department and Hancock Biological Station, and these manual studies are an arduous and time-consuming effort. …

How Students Investigate: Understanding Students’ Use Of Scientific Schemas In Open-Ended Labs, J. Alexander Wall

Masters of Education in Teaching and Learning

Schema provides a theoretical framework for understanding the nature of science, inquiry, and open-ended labs. These topics have been emphasized in the state standards, especially in high school sciences. In this study the researcher took field notes, collected lab write ups, and conducted focus group interviews to understand students’ use of schema related to open-ended labs. These data were analyzed with the constant comparative method to generate themes. The author describes the major findings with parallel narratives, one focused on a student’s confusion and the other focused on a student’s understanding. The author concludes by advocating for science teachers to …

Rebuilding Grid Governance, Joel B. Eisen, Heather E. Payne

BYU Law Review

As climate change sharpens the focus on our electricity systems, there is widespread agreement that the institutions that govern our electric grid must change to realize a clean energy future in the timescale necessary. Scholars are actively debating how grid governance needs to change, but in this Article we demonstrate that current proposals are insufficient because they do not contemplate “rebuilding.” This Article defines “rebuilding” as ending entities tasked with grid governance and creating new ones to take their place. We propose what no one else has: an overarching framework for rebuilding any grid governance institutions.

This Article discusses when …

Evaluation Of The Geotechnical And Foundation Components On Jud Site, Mirabel W. Nkanor

Honors Theses

This thesis is part of the senior design final project of the Civil Engineering Department at the University of Mississippi. Geotechnical and foundation analyses were done on a proposed construction project for a multi-family home in Orlando, Florida. This evaluation done in this thesis follows the pre-existing geotechnical report on the side, USDA soil reports, ASCE Code 32-01 (Design of Foundations), and ASCE-7 Section 12.31.1 (Foundations and Superstructure-to-Foundation Connections).

A structural system was selected from the proposed location, on the corner of South Conway and Judge Road, and an evaluation of the Bearing Load capacity was completed to determine the …

Crafting Comfort: The Design And Production Of A High-End Poolside Lounge Chair, John Hollis Tackett, Robert Griffis

Honors Theses

This report focuses on the development, design, and manufacturing of the Adjustable Lounge Chair, a high-end poolside lounge chair created to address un-met customer demand in the market. The investigation began with a market analysis to identify sought-after features not currently offered by competitors' products. This analysis drove the design of the chair, which was developed using CAD software, followed by the construction of a physical prototype to validate the concept.

The chair's innovative features include adjustable lumbar support and chair height, as well as a removable face-piece that enables users to comfortably lie prone without straining their necks. These …

Leadership And Project Management In Engineering: Baja Tube Bender, Maysyn Tm Sorensen

Honors Program: Senior Projects (Public)

Typical coursework for Undergraduate Mechanical Engineering students does not deeply focus on project management and leadership. Detailed in the following documentation is review of my Mechanical Engineering Senior Design capstone project as well as analysis of final presentations of other capstone projects. The Senior Design capstone projects spanned both semesters of the ‘22-’23 academic school year. After the first semester of my project I produced a post-mortem report to analyze the project’s progress and suggest improvements for the project, design, and team interaction. These improvements were compiled into an action plan and implemented in the spring semester. When the project …

Design Of University Small-Scale Dairy Processing Facility, Philip J. Hildebrand, Joshua Arejola, Alicia Andersen, Terry Howell Jr, Tami M. Brown-Brandl

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This project was assigned to research the feasibility and value of implementing a dairy processing facility on the campus of the University of Nebraska-Lincoln. The facility would process milk produced from cows under the same roof and will serve as an educational experience for Nebraska dairy farmers, UNL students, and K-12 students in the Lincoln-Lancaster County area. If the project is successful and replicated across the state, this facility could have a significant impact on the reduction of milk transportation costs in the Nebraska dairy industry.

The project began with researching milk processing methods and steps from production to consumption. …

Integrated Neutrosophic Best-Worst Method For Comprehensive Analysis And Ranking Of Flood Risks: A Case Study Approach From Aswan, Egypt, Safa Al-Saeed, Nabil M. Abdelaziz

Neutrosophic Systems with Applications

This paper presents a comprehensive framework for the analysis and ranking of flood risks with respect to regional variations and data uncertainties under a Neutrosophic environment. The research introduces a novel approach to flood risk mitigation and management, bringing together the scientifically robust Best-Worst Method (BWM) and single-valued Neutrosophic set for the first time. The unique application of a single-valued Neutrosophic set allows us to better illustrate and manage uncertainty, imprecision, and vagueness in data. Additionally, we employ BWM, a multi-factor decision-making method, for discerning and ranking the most influential flood risk factors. Together, the integrated methodologies provide a balanced, …

Using Self-Efficacy Theory To Design Arduino Instruction For Novices: A Replication Study, Donald M. Johnson, Michael Pate, Christopher M. Estepp, George Wardlow

Journal of Research in Technical Careers

A replication study was conducted to determine the effectiveness of an instructional treatment based on self-efficacy theory when used with novice Arduino microcontroller users. Students (n = 32) in an introductory university agricultural systems technology course participated in a lesson on Arduino microcontrollers, circuit breadboarding, and Arduino programming which included four hands-on practice tasks, designed to provide students with positive mastery, vicarious and social persuasion experiences. Next, students completed a laboratory activity and were provided additional opportunities for mastery, vicarious, and social persuasion experiences. The one-group pretest-posttest design indicated the instructional treatment had significant (p < .001) and large effects in increasing students’ interest in Arduino, breadboarding self-efficacy, programming self-efficacy, and Arduino knowledge. These findings were consistent with the original study and provided additional evidence for self-efficacy theory as an effective model for developing instruction for novice Arduino users. Students’ written comments provided additional insight concerning the instructional treatment.

Understanding Vascular Calcification Through The Lens Of Canonical Wnt Signaling, Karlee Mcneel

Theses and Dissertations

Every 37 seconds, someone in the United States dies from cardiovascular disease. Vascular calcification is one of the underlying causes of these fatal events. Medial calcification develops following arteriosclerosis, or hardening of the arteries. Medial calcification is characterized by the deposition of hydroxyapatite in the medial layer of the arteries after normal vascular smooth muscle cells undergo a phenotypic switch to resemble osteoblast-like cells. It is hypothesized that this switch is caused by the wingless related (WNT)-Signaling pathway. The WNT-Signaling pathway, upon activation, causes the upregulation of osteogenic markers for the development of osteoblast-like cells. Current treatments alleviate consequences of …

The Antler: The Design And Development Of An Independent Shower Support Stand For Those Living With Lower Extremity Limb Loss, Kylie Wright

Honors Theses

While we do not often think about it, taking a shower is a privilege. Standing in the hot water, cleaning off after a long day outdoors, and taking a moment to simply relax is an experience that most people in the U.S. have participated in. However, about 1.4 million Americans do not have this luxury3. Lower extremity amputees have long been advised to shower while seated for their safety. This population is unable to experience the simple independence that accompanies standing in the shower. Despite the growing rate of amputations each year, no products are currently available on the market …

An Analysis Of The Production Of Pharmaceutical-Grade Acetone Via The Dehydrogenation Of Isopropanol (Ipa), Jordan Desplas

Honors Theses

The production of 99.9 wt% acetone from isopropanol in Unit 1100 is designed to start up in 2025 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process, and the economic analysis was estimated in Microsoft Excel. Parametric and topological optimization was performed linearly on the unit operations in the process. The NPV was improved by $14M from a base case of $122M to an optimized case of $136M. The project …

Optimization Of A Fluidized Bed Reactor For The Production Of Acetone From Isopropyl Alcohol, Andrew Rawls Wasson

Honors Theses

For the optimization of the isopropyl alcohol to acetone process, Unit 1100, the Net Present Value (NPV) was used as the objective function to observe the economic impact of each of the optimization factors being tested. During the optimization process, it is not only important to optimize the process’s profitability but also to ensure that the process operates efficiently and meets product specifications. The goal of this optimization was to alter variables from the base case calculations of Unit 1100 to maximize the NPV of the unit. AVEVA ProII software was used to simulate the process and make changes to …

Pour-Over Coffee Stand With Warmer, Francesca Patawaran

Honors Theses

This project sought to demonstrate the process of bringing a new product into the market, from the initial design and prototyping stage to marketing and, ultimately, mass production. As part of the curriculum of The Haley Barbour Center for Manufacturing Excellence (CME), the project team manufactured fifteen Pour-Over Coffee Stands with electric heating components. We first created a 3D model of the proposed design, ensuring that all components fit together in an assembly. Next, we worked with the lab technicians to create a prototype of the product. Then, we refined the manufacturing process to eliminate waste where possible. Throughout the …

An Investigation Into The Common Problems Of Lagoon Wastewater Treatment In Kentucky, Kaylee A. Jones

Honors Theses

Lagoon wastewater treatment systems are commonly used in areas that do not have the available resources for typical mechanical wastewater treatment. Lagoon systems consist of multiple preliminary lagoons, but mainly rely on long-term facultative lagoons for most analyte removal. In this study, one particular lagoon wastewater treatment system (named Municipality A Wastewater Treatment Plant) is investigated due to noncompliance with governmental standards provided by the National Pollutant Discharge Elimination System (NPDES). Samples were collected by researchers at 4 different instances inside of the treatment systems. These samples were sent to an analytical laboratory for testing. The readings from these samples …

Development Of Novel Sensor Coating Methodology To Enable Understanding Of Fouling Mechanisms On Ion Exchange Membranes, Andrew Ulmer

Honors Theses

As populations expand and natural water resources are depleted, severe droughts and limited access to clean water have become an increased threat to areas across the world. Effective and economic water treatment methods such as electrodialysis (ED) are vital for combating these threats, especially in developing nations and secluded locations. Organic foulant adsorption on the surface of ion exchange membranes severely limits the capabilities of water desalination systems such as ED along with significantly increasing maintenance costs. Understanding characteristics such as the total amount and rate at which these foulants at specific concentrations adsorb and desorb to the membranes is …

The Use Of Scattering Cancellation To Cloak And Decouple Slot Antennas And Antenna Arrays, Daniel Ferro

Honors Theses

The concept of cloaking has been prevalent in emerging research, being able to hide oneself completely from outside observers would be a huge benefit for covert surveillance and other fields. This idea has expanded past optical invisibility into the field of electromagnetic invisibility. To accomplish this form of cloaking, a non-natural material, called metamaterials, must be used. Furthermore, metamaterials can be used in a variety of different techniques including transformation-based cloaking, transmission line cloaking, and scattering cancellation cloaking. One application of cloaking is to use scattering cancellation to decouple two antennas that are placed too closely together such as in …

The Use Of Lidar To Measure Water Surface Elevations In Froude-Scaled Physical Hydraulic Models, Gary L. Bell

Theses and Dissertations

Light detection and ranging (LiDAR) instrumentation is becoming more diverse in our world of today. One challenge in scaled physical hydrodynamic models in a laboratory setting is obtaining high resolution water surface elevation data while maintaining accuracy requirements. Accurate water surface elevations are a primary parameter in hydraulic models as they are a means of controlling/monitoring the physical model’s boundary conditions, analyzing model experiment results, and informing model conclusions. This study focuses on laser scanners that have ranging accuracies of at least +/-10 millimeters (mm) or better for the purpose of attaining LiDAR water surface elevation measurements in scaled physical …

An Investigation Into Perceptions, Expectations, And Development Of Professional Skills In Engineering Students, Morgan Kathryn Green

Theses and Dissertations

Upon graduation from an undergraduate institution, engineering graduates are expected to have a baselevel skill in technical skills related to their discipline. Teaching technical skills comes naturally to engineering programs as the conceptual understanding of the material form the foundation of engineering ability. However, engineering graduates also are expected to have a baselevel of professional skills, which are more subjective in nature and do not have a standardized approach for teaching or assessing them at the undergraduate level. An investigation into current perceptions of professional skills by relevant parties is an initial step in providing more structure to professional skills …

Where Did They Come From? Why Did They Go? How Engineering Students’ Perceptions Cultivate Experiences And Influence Behaviors, Sara Campbell Vick

Theses and Dissertations

Engineering undergraduate students have opinions and perceptions of engineering disciplines and engineering undergraduate students do not always matriculate and graduate in precisely the same discipline. Understanding how these two characteristics of engineering undergraduate students interact to inform behaviors is important for engineering educators and administrators to increase and improve recruitment and retention among their students.

This dissertation approached each characteristic of engineering students, first separately and then together. A nationwide survey of undergraduate engineering students found significant differences in how students perceive various engineering disciplines along several paired-term anchored scales. These differences were equally significant when scores were considered in …

Robotic Cotton Harvesting With A Multi-Finger End-Effector: Research, Design, Development, Testing, And Evaluation, Hussein Gharakhani

Theses and Dissertations

Cotton is harvested with large and heavy machines that are very efficient but have some disadvantages. They can harvest the crop only once at the end of the growing season. Since cotton bolls do not mature uniformly, the early opened bolls expose their fiber to weather for extended periods, reducing lint quality. In addition, the machines can also compact the soil, reducing water and fertilizer usage efficiencies and crop yields in the following years. Robotic cotton harvesting offers a promising solution to these issues. Smaller robotic harvesters could go to the field multiple times during the season to pick cotton …

Mitigating Adverse Impacts Of Increased Electric Vehicle Charging On Distribution Transformers, Akansha Jain

Theses and Dissertations

There is a growing interest in electric transportation, and the number of electric vehicles (EVs) is increasing. The resulting increase in EV charging power demand has an adverse impact on the existing power grids, especially the distribution transformers. The repeated and continued overloading caused by EV charging can significantly reduce their operational life. This dissertation aims to comprehensively study the adverse impacts of EV charging on distribution transformers and provide robust and practical solutions to mitigate it. A typical North American secondary distribution system with different EV penetration levels and four realistic residential EV charging scenarios are used for the …

A Step Toward Understanding Software Development In The Public Sector: A Study Of A Department Of Defense Research And Development Organization, Joshua Q. Church

Theses and Dissertations

This paper focuses on the importance of effective software development processes and a foundational understanding of success factors in the public sector. Although there has been significant investment in information technology, not all public sector software projects result in a successful return on investment. This study explores the crucial factors, referred to as Critical Success Factors (CSFs), that enable the success of public sector software development projects. Additionally, this study aims to discover if the CSFs, the Software Development Life Cycle (SDLC), or its methodologies are more impactful for the success of software projects. This study aims to also identify …

Design Of High-Power Ultra-High-Speed Permanent Magnet Machine, Md Khurshedul Islam

Theses and Dissertations

The demand for ultra-high-speed machines (UHSM) is rapidly growing in high-tech industries due to their attractive features. A-mechanically-based-antenna (AMEBA) system is another emerging application of UHSM. It enables portable wireless communication in the radio frequency (RF)-denied environment, which was not possible until recently. The AMEBA system requires a high-power (HP) UHSM for its effective communication performance. However, at the expected rotational speed range of 0.5 to 1 million rpm, the power level of UHSM is limited, and no research effort has succeeded to improve the power level of UHSM.

The design of HP-UHSM is highly iterative, and …

Hydrological And Water Quality Assessment Of Forested Coastal Watersheds, Shreeya Bhattarai

Theses and Dissertations

Coastal regions are at risk of environmental threats. Flooding in coastal rivers is the result of intense precipitation which is triggered by climate change. Coastal watersheds are prone to losing significant amounts of sediment and nutrients because of the shorter transport pathway that drains directly into the coastal water. In this study, the hydrology, flood frequency, and water quality assessment of two coastal watersheds, Wolf River watershed (WRW) and Jourdan River watershed (JRW), were conducted using the Soil and Water Assessment Tool (SWAT). Since WRW and JRW are the main tributaries to fetch freshwater to Saint Louis Bay (SLB) of …

Secure And Efficient Federated Learning, Xingyu Li

Theses and Dissertations

In the past 10 years, the growth of machine learning technology has been significant, largely due to the availability of large datasets for training. However, gathering a sufficient amount of data on a central server can be challenging. Additionally, with the rise of mobile networking and the large amounts of data generated by IoT devices, privacy and security issues have become a concern, resulting in government regulations such as GDPR, HIPAA, CCPA, and ADPPA. Under these circumstances, traditional centralized machine learning methods face a problem in that sensitive data must be kept locally for privacy reasons, making it difficult to …