Engineering Commons^™

The Optimization Of Ɣ-Al2o3 Production From Aluminium Foil Waste By Precipitation, Nessren Farrag, Yousef Amin

Chemical Engineering

The objective of this work encompasses the application of aluminium foil waste for preparing alumina (Al2O3), by precipitation. The response surface approach is developed for the produced ɣ-Al2O3 phase. Experiments were performed according to a 32 factorial design to evaluate the effects of hydrochloric acid (HCl) concentration, sodium hydroxide (NaOH) that was used as precipitation agent, as well as the calcination temperatures on the purity and yield. The effect of the two independent variables on the response variables was studied by response surface plots and contour plots generated by the Design-Expert software. The desirability function was used to optimize the …

Exploring Senior Chemical Engineering Students’ Approach To Process Safety Decision Making, Jeffrey Saunders Stransky

Theses and Dissertations

Despite investments in chemical process safety education, evidence suggests that engineers’ decision making may contribute to process safety incidents. Currently, limited educational endeavors in process safety decision making exist, raising the need for a better understanding of how to prepare chemical engineering students for industry decisions. This dissertation fortifies current process safety education through three studies involving senior chemical engineering students. Study One developed the Engineering Process Safety Research Instrument (EPSRI) through exploratory and confirmatory factor analyses. Educators may use the EPSRI to evaluate their students’ moral development. Study Two evaluated a digital process safety game, Contents Under Pressure, on …

Estimating The Impact Of Intersection Traffic On Air Quality Emissions At Camden Cooper Medical Health Intersection Through The Integration Of Vissim/Moves Models, Kourtney Nicole Arena

Theses and Dissertations

Traffic emissions near intersections can increase significantly due to idling as well as stop-and-go traffic conditions. Increased emissions of pollutants like particulate matter (PM), nitrogen oxides (NOx), carbon monoxide (CO), and polycyclic aromatic hydrocarbons (PAHs) found in traffic exhaust deteriorate the health of the population that is exposed to them. Since general traffic emissions are increased by the stop-and-go conditions produced at intersections, PAH traffic emissions should also increase from intersection driving conditions. The intersection of Dr. Martin Luther King Jr. Blvd and Haddon Ave in Camden, NJ was identified as an ideal site to study PAH traffic emissions. To …

Inventory, Operations, And Safety At Free Right-Turn Ramps, Aemal Khattak, Jonathon Camezind, Mm Shakui Haque

Nebraska Department of Transportation: Research Reports

This research focused on traffic safety and operational performance of rural, minor approach stop-controlled intersections with free right-turn (FRT) ramps. The objectives of the research were to:

• Create a statewide inventory of rural FRT ramp intersections and provide to the Nebraska Department of Transportation (NDOT),
• Using NDOT 10-year crash data, conduct statistical safety analysis of rural FRT intersections extending ¼-mile in each direction from the intersection,
• Study vehicular operations at rural intersections with and without FRT ramps including a comparison of vehicular conflicts, and
• Develop guidelines for operations and safety tradeoffs to assist with NDOT projects on maintaining similar locations, …

Nebraska Balanced Mix Design – Phase I, Farzad Yazdipanah, Mahdieh Khedmati, Hamzeh Haghshenas

Nebraska Department of Transportation: Research Reports

Balanced mix design (BMD) is an alternative concept for designing asphalt mixtures that mainly focuses on performance of mixtures rather than only volumetric analysis. Using this concept, it would be possible to account for the incorporation of recycled asphalt mixtures, warm technology, polymers, rejuvenators, and other foreign additives, as well as external effective factors on the mix design such as environmental effects. This project sought to investigate performance-based methodologies for the asphalt mix design by taking a step to develop a preliminary Nebraska BMD framework. With that, selection of appropriate performance tests, finding a functional laboratory aging protocol, and defining …

Molecular Simulations Of Mechanical Effects Of Adsorption In Gas And Liquid Phases, Alina Emelianova

Dissertations

Fluids adsorbing in nanoporous solids cause high pressures that affect the solids and the properties of the fluids themselves. This work explores the mechanical response of solids to the adsorption of gas and liquid. Chapter 1 outlines the current achievements in investigating the mechanical response of adsorbents to the adsorption process, specifically, the computational approaches to predict adsorption-induced deformation. Chapter 2 introduces the theoretical and computational methods employed in this work. Chapters 3-7 address the design and application of the computational techniques for such prediction in different systems: mesoporous silica, microporous zeolites, and metal-organic frameworks, and Chapter 8 focuses on …

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Engineering A Multicompartment In Vitro Model For Dorsal Root Ganglia Phenotypic Assessment, Sydney M. Caparaso, Adan Redwine, Rebecca A. Wachs

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Despite the significant global prevalence of chronic pain, current methods to identify pain therapeutics often fail translation to the clinic. Phenotypic screening platforms rely on modeling and assessing key pathologies relevant to chronic pain, improving predictive capability. Patients with chronic pain often present with sensitization of primary sensory neurons (that extend from dorsal root ganglia [DRG]). During neuronal sensitization, painful nociceptors display lowered stimulation thresholds. To model neuronal excitability, it is necessary to maintain three key anatomical features of DRGs to have a physiologically relevant platform: (1) isolation between DRG cell bodies and neurons, (2) 3D platform to preserve cell–cell …

Neutrosophic Mcdm Methodology For Risk Assessment Of Autonomous Underwater Vehicles, Shimaa S. Mohamed, Ahmed Abdel-Monem, Alshaimaa A. Tantawy

Neutrosophic Systems with Applications

Due to its usefulness in several industries and the military, researchers have concentrated on developing autonomous underwater vehicles (AUVs). However, AUV navigation continues to be a difficult challenge to solve owing to the variety of underwater settings. The usage of AUVs, or autonomous underwater vehicles, is not without dangers like malfunction, ecological risks, loss of communications, cybersecurity risks, collisions, and others. There are many criteria to assess these risks technical, operational, economic, and regulatory. So, the methods of multi-criteria decision-making (MCDM) is used to deal with these various criteria. The analytical hierarchy process (AHP) method is an MCDM methodology, that …

Using An Embedded System For A Quality Cup Of Coffee, Evan Powers, Joshua Stermer, Tsion Yohannes

2023 Symposium

Many coffee lovers spend up to $5 on a cup of coffee everyday. To save money one could make them at home, but a quality machine with PIDs start at $1000. Using an embedded system one could spend less than $50 and a few hours implement PIDs into an existing $400 machine that will last a lifetime. microcontroller. Learning C language combined with hardware implementation applied to cheap and simple everyday objects can improve everyday quality of life and save money.

This is challenging because we have to incorporate the additional circuitry into a pre established circuit with limited space, …

The Influence Of Environmental Tax And Technology On Different Air Pollution Emissions In Oecd Countries, Malak Ali Assaf

BAU Journal - Creative Sustainable Development

Although countries continuously employ taxation and technological measures to control air pollution in the Organization for Economic Co-operation and Development, the results of these practices should be evaluated to determine whether they reach their intended outcomes. This study used panel autoregressive distributed lag model to establish how environmental taxes and technology affects the emission of air pollutants (nitrogen oxides, Carbon dioxide, and particulate matter 2.5). Using secondary data present in the OECD Database and The World Bank, EViews panel was derived to create 3 model in which each of the three variables would be sufficiently explained by environmental tax, abatement …

Evidence On The Impact Of Corruption On Economic Growth: A Systematic Literature Review, Nour Mohamad Fayad

BAU Journal - Creative Sustainable Development

The relationship between corruption and economic growth is complex and has been extensively studied. Till recent days it is still one of the most genuine political challenges that all countries face. Even though anti-corruption measures have improved, they still lack consistency and clarity. Accordingly, this paper reviews the extant literature on this issue, by examining 66 research papers on the impact of corruption on economic growth. The study was aided by analysis of the theme Corruption and economic growth identified in the present literature. Impact of Corruption on economic growth has been tested in multiple studies utilizing time series, panel, …

A Novel Specialized Search Engine For Ai-Models And Their Comparison, Imane Haidar, Ziad Doughan, Ali M. Haidar Prof.

BAU Journal - Creative Sustainable Development

In recent years, the world of AI has tremendously increased in size and depth. Both new and old researchers are facing the problem of fast emerging AI researches, models and services. One needs to continuously read complete papers to understand the idea behind any novel research. This work presents a novel AI service that removes the burdens of long text reading and uncategorized search. It consists of a website that categorizes all the AI researches in a well-designed database. The users just have to select the models they are interested in, and the website will return a table containing the …

Discussing Different Images Of Pharmaceutical Company, Roula Afif Bou Assi, Ola Bazaza

BAU Journal - Creative Sustainable Development

Every organization is a complex, non-linear, and dynamic system. Gareth Morgan discussed eight different metaphors where they can be useful devices to create mental images to clarify and interpret our organizations. These eight metaphors are: machine, organism, brain, culture, political, flux and transformation, psychic prisons and instruments of domination. This combination of metaphors helps us understand our organization, analyze the structure, the leadership style (NAGY, December 2014). In this paper I will discuss the different metaphors of a pharmaceutical company (X). It is a growing pharmaceutical company, where reading and analyzing the different metaphors will definitely help them to prepare …

Journal Of Pre-College Engineering Education Research (J-Peer) Annual Report From January 1, 2022, To December 31, 2022, Senay Purzer, Brooks M. Leftwich

Journal of Pre-College Engineering Education Research (J-PEER)

In this annual report, we present our reflections on 2022 along with the Journal of Pre-College Engineering Education Research (JPEER) readership trends and authorship metrics. In 2022, J-PEER published two issues in volume 12 comprised of 17 articles. The second issue of the year included a special issue on the impact of COVID-19 on education, marking the impact that the pandemic had on pre-college engineering education.

Mining Themes In Clinical Notes To Identify Phenotypes And To Predict Length Of Stay In Patients Admitted With Heart Failure, Ankita Agarwal, Tanvi Banerjee, William Romine, Krishnaprasad Thirunarayan, Lingwei Chen, Mia Cajita

Computer Science and Engineering Faculty Publications

Heart failure is a syndrome which occurs when the heart is not able to pump blood and oxygen to support other organs in the body. Identifying the underlying themes in the diagnostic codes and procedure reports of patients admitted for heart failure could reveal the clinical phenotypes associated with heart failure and to group patients based on their similar characteristics which could also help in predicting patient outcomes like length of stay. These clinical phenotypes usually have a probabilistic latent structure and hence, as there has been no previous work on identifying phenotypes in clinical notes of heart failure patients …

Devices And Methods For Removing Perflourinated Compounds From Contaminted Water, Dibakar Bhattacharyya Phd, Anthony Saad Phd, Rollie Mills Phd, L. E. Ormsbee Phd, M Abdul Mottaleb Phd

Civil Engineering Faculty Patents

PFAS compounds have emerged as a persistent and harmful environmental pollutant that present significant challenges to health and remediation. This patent describes a new technology that employs membrane technology along with thermo-responsive adsorption-desorption processes to remove perfluorinated compounds from contaminate water.

An Lp-Based Characterization Of Solvable Qap Instances With Chess-Board And Graded Structures, Lucas Waddell, Jerry Phillips, Tianzhu Liu, Swarup Dhar

Faculty Journal Articles

The quadratic assignment problem (QAP) is perhaps the most widely studied nonlinear combinatorial optimization problem. It has many applications in various fields, yet has proven to be extremely difficult to solve. This difficulty has motivated researchers to identify special objective function structures that permit an optimal solution to be found efficiently. Previous work has shown that certain such structures can be explained in terms of a mixed 0-1 linear reformulation of the QAP known as the level-1 reformulation-linearization-technique (RLT) form. Specifically, the objective function structures were shown to ensure that a binary optimal extreme point solution exists to the continuous …

Hierarchical, Porous Hydrogels Demonstrating Structurally Dependent Mechanical Properties, Elisabeth Lloyd, Rami Alhasan, Sujata Dhakal, Svetlana Morozova, Douglas R. Tree, Robert Hickey

Faculty Publications

While hierarchical ordering is a distinctive feature of natural tissues and is directly responsible for their diverse and unique properties, research efforts to synthesize biomaterials have primarily focused on using molecular-based approaches without considering multiscale structure. Here, we report a bottom-up self-assembly process to produce highly porous hydrogels that resemble natural tissues both structurally and mechanically. Randomly oriented, physically crosslinked nanostructured micelles form the walls of aligned, polymer-rich pore walls that surround water-rich cavities. Extremely soft elastic modulus (<  1 kPa), highly stretchability (greater than 12-times), strain-hardening, and completely reversible deformation result from the hierarchical structure. Independent control of nano and macroscales is realized through the combination of polymer macromolecular parameters and processing conditions, directly impacting the resulting phase behavior. Here, we demonstrate precise control of the material structure and structure orientation over many orders of magnitude (e.g., nm – µm), and reveal how the multiscale structure directly impacts mechanical properties.

Post-Processed Data And Graphical Tools For A Conus-Wide Eddy Flux Evapotranspiration Dataset, J. M. Volk, J. L. Huntington, F. Melton, B. Minor, T. Wang, S. Anapalli, R. G. Anderson, S. Evett, A. French, R. Jasoni, N. Bambach, W. P. Kustas, J. Alfieri, J. Prueger, L. Hipps, L. Mckee, S. J. Castro, M. M. Alsina, A. J. Mcelrone, M. Reba, B. Runkle, M. Saber, C. Sanchez, E. Tajfar, R. Allen, M. Anderson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Large sample datasets of in situ evapotranspiration (ET) measurements with well documented data provenance and quality assurance are critical for water management and many fields of earth science research. We present a post-processed ET oriented dataset at daily and monthly timesteps, from 161 stations, including 148 eddy covariance flux towers, that were chosen based on their data quality from nearly 350 stations across the contiguous United States. In addition to ET, the data includes energy and heat fluxes, meteorological measurements, and reference ET downloaded from grid- MET for each flux station. Data processing techniques were conducted in a reproducible manner …

Decoding The Hydrodynamic Properties Of Microscale Helical Propellers From Brownian Fluctuations, Bernard Yurke

Materials Science and Engineering Faculty Publications and Presentations

The complex motility of bacteria, ranging from single-swimmer behaviors such as chemotaxis to collective dynamics, including biofilm formation and active matter phenomena, is driven by their microscale propellers. Despite extensive study of swimming flagellated bacteria, the hydrodynamic properties of their helical-shaped propellers have never been directly measured. The primary challenges to directly studying microscale propellers are 1) their small size and fast, correlated motion, 2) the necessity of controlling fluid flow at the microscale, and 3) isolating the influence of a single propeller from a propeller bundle. To solve the outstanding problem of characterizing the hydrodynamic properties of these propellers, …

Thermal Transport And Physical Characteristics Of Silver-Reinforced Biodegradable Nanolubricant, Jaime Taha-Tijerina, Karla Aviña, Nicolás Antonio Ulloa-Castillo, Dulce Viridiana Melo-Maximo

Informatics and Engineering Systems Faculty Publications

In this investigation, the thermal transport behavior of biodegradable lubricant reinforced with silver nanostructures (AgNs) at various filler fractions of 0.01, 0.05, 0.10, and 0.20 weight percent was evaluated over a temperature scan analysis, ranging from room temperature up to 60 °C. The experimental results revealed significant gradual enhancements in thermal conductivity as AgNs concentration and evaluating temperatures were increased. These improvements showed the important role of nanostructures’ interaction within the biodegradable lubricant. The thermal conductivity performance improved for nanolubricants ranging from 6.5% at 30 °C and 0.20 wt.% AgNs content up to a maximum 32.2%, which was obtained at …

Sentiment Analysis Of Text And Emoji Data For Twitter Network, Paramita Dey, Soumya Dey

Al-Bahir

Twitter is a social media platform where users can post, read, and interact with 'tweets'. Third party like corporate organization can take advantage of this huge information by collecting data about their customers' opinions. The use of emoticons on social media and the emotions expressed through them are the subjects of this research paper. The purpose of this paper is to present a model for analyzing emotional responses to real-life Twitter data. The proposed model is based on supervised machine learning algorithms and data on has been collected through crawler “TWEEPY” for empirical analysis. Collected data is pre-processed, pruned and …

Soybean Crop Coefficients Under Different Seeding Rates And Full And Limited Irrigation And Rainfed Management, Suat Irmak, Rupinder Sandhu

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The effects of soybean seeding rates on evapotranspiration (ET_c) and grassand alfalfa-reference crop coefficients (K_co and K_cr) were investigated under five seeding rates (185,250, 247,000, 308,750, 370,500 and 432,250 seeds ha^-1) (62, 82, 103, 124 and 144% of the recommended seeding rate of 300,000 seeds ha^-1 in the experimental region) and different irrigation strategies (i.e. full irrigation treatment [FIT], limited irrigation of 75% FIT and 50% FIT and rainfed treatment). K_co and K_cr values were developed for each soybean growth stage. The seasonal ET_c ranged from 460 mm for …

Electronically Modulated Feni Composite By Ceo2 Porous Nanosheets For Water Splitting At Large Current Density, Ming-Yu Ding, Wen-Jie Jiang, Tian-Qi Yu, Xiao-Yan Zhuo, Xiao-Jing Qin, Shi-Bin Yin

Journal of Electrochemistry

Exploiting highly active and non-noble metal bifunctional catalysts at large current density is significant for the advancement of water electrolysis. In this work, CeO₂ electronically structure modulated FeNi bimetallic composite porous nanosheets in-situ grown on nickel foam (NiFe₂O₄-Fe₂₄N₁₀-CeO₂/NF) is synthesized. Electrochemical experiments show that the NiFe₂O₄-Fe₂₄N₁₀-CeO₂/NF exhibited the outstanding activities toward both oxygen and hydrogen evolution reactions (OER and HER) (η₁₀₀₀ = 352 mV and η₁₀₀₀ = 429 mV, respectively). When assembled into a two-electrode system for …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Fate And Transport Of Per- And Polyfluoroalkyl Substances (Pfas) At Aqueous Film Forming Foam (Afff) Discharge Sites: A Review, Jeffery T. Mcgarr, Eric G. Mbonimpa, Drew C. Mcavoy, Mohamad R. Soltanian

Faculty Publications

Per- and polyfluorinated alkyl substances (PFAS) are an environmentally persistent group of chemicals that can pose an imminent threat to human health through groundwater and surface water contamination. In this review, we evaluate the subsurface behavior of a variety of PFAS chemicals with a focus on aqueous film forming foam (AFFF) discharge sites. AFFF is the primary PFAS contamination risk at sites such as airports and military bases due to use as a fire extinguisher. Understanding the fate and transport of PFAS in the subsurface environment is a multifaceted issue. This review focuses on the role of adsorbent, adsorbate, and …

Filaments And Their Application To Air Lasing, Spectroscopy, And Guided Discharge, Ali Rastegari

Optical Science and Engineering ETDs

Laser filamentation is a fascinating phenomenon that occurs when an intense laser beam travels through transparent materials, in particular air. At sufficiently high power (TW in the near IR, GW in the UV), instead of spreading out like a regular laser beam, something remarkable happens: the laser beam becomes tightly focused, creating a thin and intense column of light called a laser filament. Laser filamentation is characterized by two main properties: (I) a high-intensity core that remains narrow over long distances beyond the Rayleigh range and (II) a low-density plasma channel within the core. In recent years, laser filamentation has …