Engineering Commons^™

Adsorption Of Long And Short Per- And Polyfluoroalkyl Substances (Pfas) Onto Granular Activated Carbon And Porous Organic Polymers, Yan Zhang

USF Tampa Graduate Theses and Dissertations

Per- and polyfluoroalkyl substances (PFAS) are man-made environmental contaminants causing increasing global concern due to their adverse effect on environmental and human health. Conventional treatment methods are ineffective in removing short-chain PFAS because of their hydrophilicity and resistance to degradation. This study is to design an appropriate adsorption system to remove both long- and short-chain PFSA at environmentally relevant concentrations and conditions. Four primary research tasks were designed to evaluate the performance of a structurally-tunable and chemically-stable porous organic polymers (POPs) for PFAS removal under realistic environmental conditions, including the assessment of POPs’ performance without co-contaminants (Chapter 2), the assessment …

From Prosumer To Flexumer: Case Study On The Value Of Flexibility In Decarbonizing The Multi-Energy System Of A Manufacturing Company, Markus Fleschutz, Markus Bohlayer, Marco Braun, Michael B. Murphy

Publications

Digitalization and sector coupling enable companies to turn into flexumers. By using the flexibility of their multi-energy system (MES), they reduce costs and carbon emissions while balancing the electricity grid. However, to identify the necessary investments in energy conversion and storage technologies to leverage demand response (DR) potentials, companies need to assess the value of flexibility. Therefore, this study quantifies the flexibility value of a production company’s MES by optimizing the synthesis, design, and operation of a decarbonizing MES considering self-consumption optimization, peak shaving, and integrated DR based on hourly prices and carbon emission factors (CEFs). The detailed case study …

Friction And Heat Transfer Modeling Of The Tool And Workpiece Interface In Friction Stir Welding Of Aa 6061-T6 For Improved Simulation Accuracy, Ryan Melander

Theses and Dissertations

Friction stir welding (FSW) is a solid-state joining process that offers advantages over traditional fusion welding. The amount of heat generated during a FSW process greatly influences the final properties of the weld. The heat is generated through two main mechanisms: friction and plastic deformation, with friction being the larger contributor in a FSW process. There is a need to develop better predictive models of the heat generation and heat transfer in FSW. Almost all models seen in the literature validate temperature predictions on only one side of the tool/workpiece interface, thus ignoring possible inaccuracy that comes from incorrect partitioning …

Integration Of Insoluble And Soluble Dopants Into Steel Using Laser Powder Bed Fusion, Mckay Goodman Sperry

Theses and Dissertations

Laser Powder Bed Fusion (LPBF) is an Additive Manufacturing (AM) method whereby complex parts can be built to near net geometry in an automated environment. Parts formed by LPBF have excellent properties and require little post-processing. While LPBF allows for creative designs to reduce weight and part count by integrating sub-components of assemblies, designers are limited to one material within any LPBF print. Although various materials can be used in LPBF, metals are of special interest to many industrial customers due to their high strength and toughness. The metals commonly used for LPBF include iron, aluminum, and titanium alloys. These …

Exploring Underground Hydrogen Storage Options In North Dakota: A Review, Aimen Laalam, Olusegun Stanley Tomomewo

Petroleum Engineering Posters and Presentations

As the world shifts towards a low-carbon future, the demand for efficient, safe, and cost-effective energy storage solutions has become increasingly critical. Hydrogen has emerged as a promising energy carrier with numerous advantages, such as high energy density, zero emission combustion, and versatile applications. Nevertheless, the challenge of effective hydrogen storage remains. This study examines the potential of underground hydrogen storage (UHS) in North Dakota, assessing its opportunities and challenges in supporting the region's renewable energy objectives. North Dakota's unique geological features, abundant renewable energy resources, and growing energy demands make it an ideal location for UHS implementation. This review …

Development Of Attack Resistant Cybersecurity Framework For Digital Health Systems, Sridevi A

Theses and Dissertations

The emerging cyber landscape demands the data to be protected by CIA triad which comprises Confidentiality, Integrity and Availability(CIA). For the swift diagnosis process, a standard patient data representation in the form of EHR (Electronic Health Record) plays a significant role. There exists a necessity to protect this EHR through the information security mechanisms namely encryption, watermarking and intrusion detection system for ensuring application and network layer security. Implementation of medical data protection solution on a reconfigurable hardware platform can further strengthen EHR security. This research work effectively achieves the CIA triad for healthcare cybersecurity at data, application and network …

Detecting Lumbar Muscle Fatigue Using Nanocomposite Strain Gauges, Darci Ann Billmire

Theses and Dissertations

Introduction: Muscle fatigue can contribute to acute flare-ups of lower back pain with associated consequences such as pain, disability, lost work time, increased healthcare utilization, and increased opioid use and potential abuse. The SPINE Sense system is a wearable device with 16 high deflection nanocomposite strain gauge sensors on kinesiology tape which is adhered to the skin of the lower back. This device is used to correlate lumbar skin strains with the motion of the lumbar vertebrae and to phenotype lumbar spine motion. In this work it was hypothesized that the SPINE Sense device can be used to detect differences …

On Algorithmic Design Methodologies, Heterogenous Rfsoc/Gpu Beamformers, And Cryogenic Antenna Efficiency Evaluation For Phased Array Receivers In Radio Astronomy, Mitchell C. Burnett

Theses and Dissertations

Modern radio astronomy’s demand for high sensitivity and wide fields of view is met through innovations that reduce receiver system noise temperatures and integrate technology supporting parallel processing and larger instantaneous bandwidths. The advanced L-band phased array camera for astronomy (ALPACA) is a fully cryogenic 69 dual-polarized dipole PAF and digital beamformer back end for the Green Bank Telescope. This instrument will form 40 dual-polarized beams yielding a 0.35 sq. deg field of view on the sky with a 305.2 MHz processing bandwidth. The target system noise temperature is 27 K. A structured technique to map critically sampled and oversampled …

Learning In Transition: Developing And Employing Pedagogical Supports To Enhance Student Learning In Engineering Education, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Scholarly research indicates that classroom environment and conditions influence the degree of student learning, levels of engagement, and overall success in engineering education. In the wake of COVID-19, educational institutions transitioned to fully online delivery that disrupted traditional and effective channels of communication enacted in classroom contexts. For a substantial number of faculty members, this rapid transition to a fully remote instructional context marked the start a novel style of teaching and learning environment, a grand departure from the traditional, direct face-to-face setting. Such rapid and disruptive change required creative solutions to routinized instructional practices and compelling faculty to adjust …

Bend And Not Break: Examining Hispanic Engineering Student's Academic Challenges During Covid-19, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Student success in higher education remains an area of interest, particularly for underrepresented minorities. Studies reveal that while Latino college enrollment has increased, retention rates continue to be an ongoing struggle. Several factors that attribute to such low rates include academic self-concept, family support, cognitive mapping, managing resources, background characteristics, and separation and maintenance of family ties. In the wake of COVID-19, most institutions responded by terminating in-person instruction, mandating to seek off-campus housing, and shifting to a fully remote context. As such, students were unable to utilize campus resources and engage in established educational campus practices. In this research …

Keeping Calm And Staying Balanced: Exploring The Academic Pressures Faced By Engineering Students To Attain High Grades And Their Impact On Mental Health, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Studies reveal that grades have a short-term impact on students’ self-efficacy, motivation, and decision making. Earning high grades has become a focal point for engineering students to secure three types of opportunities: internships, post-graduation employment, and graduate school acceptance. Nonetheless, the desire to attain a competitive grade-point-average may lead to negative psychosocial effects such as increased mental exertion, physical exhaustion, anxiety, and overall lack of work-life balance. In this paper, the authors extend their prior study on the impact of grades in engineering education. The first study was conducted in the spring of 2019 at a tier one, small private …

Leveling The Playing Field: Enacting Equitable Pedagogy To Teach Rigid Body Dynamics, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Research examining the quality of engineering programs across different instructions of learning has revealed that no two programs are alike. Each program has unique and distinctive features that influence the quality and rigor of education that students receive. Institutional culture, leadership, faculty preparedness, funding and many other factors influence program quality. Additionally, researchers have also noted that many institutional gaps and equity related issues are persistent and troublesome facets that further exacerbate the academic gaps in STEM education. It is within this context, that students attending top tier universities will likely have remarkedly vast academic experiences in terms of level …

Acetate-Encapsulated Linolenic Acid Liposomes Reduce Sars-Cov-2 And Rsv Infection, Andrew R. Mcgill

USF Tampa Graduate Theses and Dissertations

Coronavirus disease-19 (COVID-19), caused by Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2), is an ongoing pandemic-endemic. In the United States, it remains the third leading cause of death in 2022. SARS-CoV-2, an RNA virus, has a genome prone to rapid mutation, generating variant species capable of resisting therapies and vaccination efforts. However, it has been estimated that more than 40% of SARS-CoV-2 infections may be asymptomatic, which calls into question any biological differences between the asymptomatic and afflicted groups. Additionally, Respiratory Syncytial Virus (RSV) is the most significant cause of bronchiolitis and asthma in neonates, with an increasing burden on the …

Exploratory Data-Driven Models For Water Quality: A Case Study For Tampa Bay Water, Sandra Sekyere

USF Tampa Graduate Theses and Dissertations

Water, a crucial resource for sustaining life, covers approximately 70% of the earth's surface. Nonetheless, the quality of water is deteriorating rapidly due to the rapid growth of urban areas and industries, which is a worrying trend causing harm to human health and the ecosystem. Water quality forecasting has a key role in water resources management by enabling effective pollution control, ecosystem monitoring, and decision-making.

Previously, traditional statistical models were used to forecast water quality, but they were unable to examine the non-linear relationships between water quality parameters, and they assumed that all datasets were distributed normally. This study uses …

Impact Of Supply Chain Robustness And Resilience On Firm Performance: A Perspective Of Pakistan Textile Industry, Aalyan Munir, Aamer Hanif, Nimra Afzal

Business Review

This study investigates the impact of supply chain resilience and robustness on firm performance and also examines the significance of supply chain risk management (SCRM) in minimizing the consequences of disruptions on supply chain performance in the context of the COVID-19 pandemic. Data was gathered using convenience sampling technique through a survey from management staff (n=409) working in textile companies operating in Pakistan. Using SPSS software for data analysis, this study proposes a mediation model where risk management practices are proposed as a mediator between supply chain resilience, robustness and firm performance. The findings highlight that supply chain resilience and …

Academic Success And Retention Pathway For Mechanical Engineering Major, Paul Akangah, Henry Ivuawuogu, Adeola Morawo, Andrea Nana Ofori-Boadu

Faculty Publications

Evaluating student success in higher education relies heavily on Grade Point Average (GPA), a measure determined by faculty through formative and summative assessments. Faculty determine these grades throughout the student's academic career. Society often equates higher grades with greater intelligence and engagement, assuming students work independently. Grades are also a means to measure or quantify learning and intellectual progress during students' academic careers. However, when students resort to unsanctioned online resources (UORs) using applications like Chegg, Course Hero, and Slader, the student may obtain good grades, but understanding and learning are grossly sacrificed. This study investigates the performance of 100 …

Designing Local Food Systems: Results From A Three-Year Pilot, Daniel B. Oerther, Sarah Hultine-Massengale, Sarah E. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A Redesigned Course Employing Blended Delivery, a Flipped Format, and Modified Mastery Learning with a Buffet Approach to Assign Final Grades Was Used to Teach Engineering Design to Approximately 25 Dual-Level (Juniors, Seniors, and First Year Graduate) Students Pursuing Baccalaureate Degrees in Environmental, Civil, or Architectural Engineering or a Graduate Degree in Environmental Engineering. the Course Replaced a Traditional Pedagogical Format that Used Lecture-Discussion Augment with Extended Homework Assignments and a Semester-Long Design Project, Which Focused on the Content of Designing a Wastewater Treatment Plants. the Redesigned Course Uses the Engineering Design Process to Improve the Local Food System, Which …

Environmental Engineering Division Panel Discussion: Exploring Career Paths In Academia - Learn, Network, And Thrive, Fethiye Ozis, David Sanchez, Matthew Alexander, Daniel B. Oerther, Shannon L. Isovitsch Parks

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Environmental Engineering Division Panel Will Provide an Opportunity to Learn from and Connect with Faculty and Leaders in the Environmental Engineering Field. Drawing on Expertise from the Premier Academic Organizations Associated with Environmental Engineering: The American Academy of Environmental Engineers and Scientists (AAEES), the Association of Environmental Engineering and Science Professors (AEESP), and the American Society of Civil Engineers (ASCE). the Panel is for All Graduate Students, Post-Docs and Early Career Faculty Who Are Interested in Receiving Advice and Networking to Advance their Careers in Environmental Engineering. the Panel Will Focus on Sharing the Experiences and Best Practices for …

Panel Discussion: Ideas For An Enjoyable And Productive Sabbatical, Jean M. Andino, David V.P. Sanchez, Michelle Marincel Payne, John D. Carpinelli, Shannon L. Isovitsch Parks, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Navigating the Sabbatical Process and Deciding on a Productive Activity Can Be Challenging. a Sabbatical Can Take Many Different Forms Depending on Career Goals, Interests, and Institution. the Purpose of This Panel Discussion is to Provide Faculty Who Have Yet to Conduct a Sabbatical with Ideas of Activities and the Process. a Variety of Personal Experiences Will Be Presented of Sabbatical Activities that Were Enjoyable and Productive. These May Include Sabbaticals Focused on Independent Engineering Research, Engineering Education Research, Development of Classes or Programs, Industry or Government Collaboration, And/or Travel. Discussion Topics Will Also Include Process Requirements of Applying, Conducting, …

Workshop Result: Environmental Engineering Faculty Learning Boyer's Model Of Scholarship, Daniel B. Oerther, Jody Squires, Danny Willis

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As Part of the 2021 (Delayed Until 2022 Due to COVID) Biennial Conference of the Association of Environmental Engineering and Science Professors (AEESP), a Preconference Workshop on the Topic of Ernst Boyer's Four-Pillar Model of Academic Scholarship in Higher Education (I.e., Discovery, Integration, Engagement, and the Science of Teaching and Learning) Was Delivered to 32 Workshop Participants. the Workshop Had Three Objectives, namely: 1) Raising Awareness to Boyer's Model of Scholarship in Higher Education; 2) Applying Boyer's Model to Evaluate Participants' Own Work; and 3) Leading Institutional Change by Sharing Boyer's Model Back Home. to Achieve These Objectives, Four Activities …

Engineering Start-Up Packages: Mixed Methods Analysis Of Composition And Implications For Early-Career Professional Formation, Monica L. Castaneda-Kessel

Office of Research Faculty and Staff Publications

This paper is an evidence-based practice paper. In competitive research environments, many universities and engineering colleges utilize start-up or recruitment packages to attract potential candidates. These costs are distributed across multiple cost centers within the university ecosystem. Potential engineering faculty candidates may sign a probationary contract and are provided with role statements during onboarding processes. Within the role statement, research has been the primary area that is catalyzed with start-up funding. Typically, start-up funding has prescribed purposes by category. According to the 2019 American Society for Engineering Education (ASEE) Engineering Research Council (ERC) Startup Package Survey, "77.6% of the start-up …

Engagement In Practice: Promoting Environmental Health Literacy To Raise Awareness Of Antibiotic Resistance, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Process of How to Engage with Communities (I.e., Community Engagement) is an Important Skill for Engineers to Acquire, and the Skill is Well Suited to Experiential Learning (I.e., Learning through Doing). to Educate Engineers to Perform Community Engagement, a Module Was Developed and Incorporated as Part of Three Different Engineering Courses, namely: 1) Science, Technology, Engineering, Art, and Math (STEAM) Diplomacy (Dual-Level Graduate and Undergraduate, Elective); 2) Public Health Engineering (Dual-Level Graduate and Undergraduate, Elective); and 3) Biological Principles of Environmental Engineering (Graduate Only, Required Course). These Courses Were Offered at the Missouri University of Science and Technology and …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Preparation And Properties Of Acrylate Grouting Material Used In Coal Mine, Zeng Juanjuan, Li Huizhi, Wei Daidong, Xue Wei, Zhu Kaipeng

Coal Geology & Exploration

Water leakage control on the coal mine roof is an inevitable challenge in the process of coal mining. In this regard, chemical grouting provides an effective method to solve this problem. Specifically, acrylate grouting materials were prepared using the synthesized magnesium acrylate solution, cross-linking agent, initiator, and accelerator as the raw materials. Based on this, the effects of the concentration of magnesium acrylates, the type and dosage of crosslinking agent and the dosage of initiator on the properties of the gels of the acrylate grouting materials were investigated. The test results indicate that the type and dosage of crosslinking agent …

Current Situation And Development Trend Of Pressure-Relief Gas Extraction In The Protective Layer Mining In Coal Mines In China, Xue Junhua, Xiao Jian, Du Xuanhong, Shi Yu

Coal Geology & Exploration

Deep coal mining in China is seriously restricted by factors including high stress, high gas pressure, and low coal seam permeability. Moreover, with the gradual deterioration of the mining conditions of deep coal seams, it is increasingly difficult to control the gas in these coal seams. Fortunately, the pressure-relief mining of protective layers serves as an efficient way to control gas and eliminate coal and gas outbursts. To meet the demand of practical projects, this paper reviews the studies on the mining technology for protective layers, the law of change in the stress of protected layers, the evolutionary law of …

Effects Of Increasing Sintering Pressure On The Performance Of Impregnated Diamond Bit, Yang Zhan, Tan Songcheng, Fang Xiaohong, Yang Kaihua

Coal Geology & Exploration

The matrix formulas of conventional hot-pressed impregnated diamond bits are mostly elemental metal systems, using WC or YG8 as the skeleton materials, Cu alloys as the bonding materials, and Ni, Co, Fe and Mn as the intermediate materials. Due to the compositions and contents of the bonding and skeleton materials in the formulas, the suitable sintering pressure is limited (≤16 MPa), while the sintering temperature is relatively high (≥ 930℃), resulting in a lower relative ratio of the actual and theoretical densities (≤98%) for the diamond bit matrix. However, the high sintering temperature will cause thermal damage to the diamonds, …

Course Strategy: Threading Triple Bottom-Line Sustainability Across Multiple Courses, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Instructional Environment for This Study Was the Missouri University of Science and Technology. Two Courses Offered through the Department of Civil, Architectural, and Environmental Engineering Are Discussed, specifically: CArE 2601 Fundamentals of Environmental Engineering; and CArE 5605 Environmental Modeling. the Pedagogical Approach to Delivery of Both Courses Included Blended Content Delivery, a Flipped Classroom, and Modified Mastery Learning. the Approach to Instruction and Technology Included Conceptual Understanding Before Spreadsheet Modeling to Verify Concepts through Application. the Course Content Focused Upon the Topic of "Triple Bottom Line Accounting" (Also Known as "Full Cost Accounting" or "True Cost Accounting"). This Content …

Did The Nae Changing The Conversation Campaign Introduce The Care Penalty Into Engineering?, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Over the Past Twenty Years, the National Academy of Engineering of the United States of America Undertook a Campaign Entitled, "Changing the Conversation." Explicit Intentions of the Campaign Included Raising Public Awareness of Engineering, Increasing the Total Number of Engineers, and Recruiting Historically Underrepresented Groups to Join Engineering. in Particular, Marketing Efforts Developed Inclusive "Tag Lines" Aimed to Diversify Groups Enrolled in Engineering and Increase the Diversity of the Professional Engineering Workforce. While Changes in Demographics Were Disappointing for Some Groups (I.e., Little to No Change Was Observed for People of Color), Generally, the Campaign Has Been Considered Moderately Successful …

Overlooked, Underlying: Understanding Tacit Criteria Of Proposal Reviewing During A Mock Panel Review, Randi Sims, Kelsey Watts, Evan Ko, Rebecca Bates, Gary Lichtenstein, Karin Jensen, Lisa Benson

Integrated Engineering Department Publications

This research paper study was situated within a peer review mentoring program in which novice reviewers were paired with mentors who are former National Science Foundation (NSF) program directors with experience running discipline-based education research (DBER) panels. Whether it be a manuscript or grant proposal, the outcome of peer review can greatly influence academic careers and the impact of research on a field. Yet the criteria upon which reviewers base their recommendations and the processes they follow as they review are poorly understood. Mentees reviewed three previously submitted proposals to the NSF and drafted pre-panel reviews regarding the proposals’ intellectual …

Recharge Water Types Of Coalbed Methane Wells: Controlling Effects On Water Yield And Countermeasures, Du Fengfeng, Ni Xiaoming, Zhang Yafei, Liu Yuru, Wang Wensheng

Coal Geology & Exploration

External water recharge of coalbed methane (CBM) wells leads to high water yield, thus affecting effective pressure propagation within coal seams and ultimately impacting gas production. This study aims to ascertain the influence of different types of recharge water on the water yield of CBM wells, as well as the characteristics of water yield and gas production of these wells under different recharge water types. Based on the exploration and development data of 25 CBM wells in the Shouyang block, this study presented general methods for obtaining the parameters for recharge water type classification and proposed the stepped method for …