Engineering Commons^™

Digital Challenges And Opportunities Of Addressing On-Site Productivity And Safety On Construction Job Sites: An International Perspective, Ahmed Hassan, Ankur Mitra, Mark Mulville, Alan Hore

Conference papers

The slow pace of digital transformation in construction remains an impediment to the industry’s evolution. Despite rapid developments in digital technologies, the vast bulk of data generated on construction job sites remains underutilised due to the limited use of real-time data capture. The diffusion of digital solutions in construction depends on successfully capturing critical real-time data that can inform and contribute to more productive work patterns and safer job sites. Nevertheless, the construction industry’s fragmented nature has segregated the digital solutions offered by technology providers from the volatile challenges facing on-site construction practitioners.

This paper will present the early development …

Wave Attenuation Through Mangrove Forest Using Lidar Representation, Elizabeth Bogan

LSU Master's Theses

Mangrove forests can be found along the world’s intertidal tropical and sub-tropical coastlines. These forested wetlands provide many ecosystem services, including supporting coastal food chains, trapping sediment, and shoreline stabilization. Mangroves are also known for flood damage mitigation by dissipating waves and surge during flooding events. Thus, coastal communities declare a vested interest in the performance of the forest to mitigate flood damage. Physical models using artificial mangrove structures have shown that red mangrove-dominated fringe forests can protect built infrastructure by reducing wave height due to increased drag. One way to estimate the contribution of red mangrove (Rhizophora mangle) prop …

Size Effects In Additively Manufactured Inconel-718 Thin Elements And Cellular Structures, Reem Abdelkarim Abo Znemah

LSU Doctoral Dissertations

A current focus in the additive manufacturing (AM) research community is the production of complex shaped metallic parts and cellular structures. Many researchers went on analyzing and simulating these structures without considering the effect of the element thickness and heterogeneous printing parameters on the resulting material behavior. To advance the application of laser powder bed fusion (LPBF), an AM process, in producing Inconel718 (IN718) complex shaped parts and cellular structures, this study aimed to investigate the effect of thin-walled elements thickness on the mechanical characteristics of both the individual elements and overall cellular structure. A multiscale experimental evaluation of the …

Complex Systems Methods Characterizing Nonlinear Processes In The Near-Earth Electromagnetic Environment: Recent Advances And Open Challenges, Georgios Balasis, Michael A. Balikhin, Sandra C. Chapman, Giuseppe Consolini, Ioannis A. Daglis, Reik V. Donner, Jürgen Kurths, Milan Paluš, Jakob Runge, Bruce T. Tsurutani, Dimitris Vassiliadis, Simon Wing, Jesper W. Gjerloev, Jay Johnson, Massimo Materassi, Tommaso Alberti, Constantinos Papadimitriou, Pouya Manshour, Adamantia Zoe Boutsi, Mirko Stumpo

Faculty Publications

Learning from successful applications of methods originating in statistical mechanics, complex systems science, or information theory in one scientific field (e.g., atmospheric physics or climatology) can provide important insights or conceptual ideas for other areas (e.g., space sciences) or even stimulate new research questions and approaches. For instance, quantification and attribution of dynamical complexity in output time series of nonlinear dynamical systems is a key challenge across scientific disciplines. Especially in the field of space physics, an early and accurate detection of characteristic dissimilarity between normal and abnormal states (e.g., pre-storm activity vs. magnetic storms) has the potential to vastly …

The Characteristics Of Successful Military It Projects: A Cross-Country Empirical Study, Helene Berg, Jonathan D. Ritschel

Faculty Publications

In the armed forces, successful digitalization is crucial to ensure effective operations. Much of the existing literature on project factors during the planning and execution phases of public IT projects do not focus specifically on military sector projects. Therefore, the paper aims to provide empirical insights into the characteristics of successful military IT projects. Data from such projects in NATO countries and agencies were collected through interviews and project documents. The findings relating to the main variable of interest, “delivery of client benefit,” supported previous findings on IT project performance. Medium-sized projects performed better than small and large projects, and …

Exploration Of Efficient Dewatering Methods In Stimulus-Responsive Hydrogels And Their Potential For Desalination, Weiliang Sun

LSU Doctoral Dissertations

Addressing global freshwater scarcity is a pressing challenge, and desalination has emerged as a viable solution to generate high-quality water without compromising natural freshwater ecosystems. In comparison to conventional desalination methods such as thermal distillation and membrane-based processes, hydrogels offer distinct advantages including strong water absorption, water retention, well-defined pore structures, customizable functional groups, and responsive properties to external stimuli. These unique characteristics position hydrogels as promising candidates for water treatment applications. Hydrogel-based desalination involves the utilization of hydrogels to absorb water from saltwater, and then discharge low-concentration solutions to obtain reclaimed water. The fundamental principle underlying the desalination ability …

Computational Design Of Electro-Organocatalysts And Transition Metal Sulfides For The Electrochemical Reduction Of Co2, Foroogh Khezeli

LSU Doctoral Dissertations

Abstract

Electrochemical CO₂ reduction (ECO₂RR) has emerged as a promising approach for generating carbon-neutral liquid fuels by utilizing excess renewable electricity to convert CO₂. This thesis aims to employ atomistic simulations by using Density Functional Theory (DFT) to investigate the mechanistic details of how transition metal sulfides and electro-organocatalysts can enhance the activity and selectivity towards desired products, including those containing C-H bonds and molecules with C-C bonds. For this project, three different electrocatalysts were designed computationally.

Firstly, MoS₂ was chosen as a transition metal sulfide catalyst with the objective of understanding the kinetics …

Controls On The Stratiform Copper Mineralization In The Western Syncline, Upper Peninsula, Michigan, William C. Williams, Theodore J. Bornhorst

Michigan Tech Publications

The Western Syncline hosts reduced-facies, or Kupferschiefer-type, sedimentary rock-hosted stratiform Cu deposits (SSC) in the lowermost meters of the Nonesuch Formation, which is part of a thick section of clastic sedimentary rocks that comprise the upper fill of the Mesoproterozoic Midcontinent Rift of North America. Located in the Porcupine Mountains Cu district in Upper Peninsula, Michigan, these blind deposits were discovered in 1956, but are not yet developed, although recent renewed interest may result in near-term production. The deposits are distinguished by their relatively undeformed nature and lack of superposed hydrothermal events. Prior to lithification, chalcocite mineralization replaced diagenetic pyrite …

Ecg Recordings As Predictors Of Very Early Autism Likelihood: A Machine Learning Approach, Deepa Tilwani, Jessica Bradshaw, Amit Sheth, Christian O'Reilly

Publications

In recent years, there has been a rise in the prevalence of autism spectrum disorder (ASD). The diagnosis of ASD requires behavioral observation and standardized testing completed by highly trained experts. Early intervention for ASD can begin as early as 1–2 years of age, but ASD diagnoses are not typically made until ages 2–5 years, thus delaying the start of intervention. There is an urgent need for non-invasive biomarkers to detect ASD in infancy. While previous research using physiological recordings has focused on brain-based biomarkers of ASD, this study investigated the potential of electrocardiogram (ECG) recordings as an ASD biomarker …

Measurements Of Scintillation Light Quenching For Protons In Rare-Earth Inorganic Scintillators, Tatiana Nathaly Espinoza

Nuclear Engineering ETDs

Scintillator detectors have become a leading choice of radiation detectors for a variety of applications, including space science. Due to their intrinsic characteristics, rare-earth inorganic scintillators provide the capability to detect both gamma and charged particles in a small detector. The response of these detectors is typically characterized using isotropic gamma sources. However, the light output produced in the scintillator from an incident gamma of a particular energy differs from the light output produced from an incident charged particle of the same energy; a phenomenon known as quenching. Using two types of rare-earth inorganic scintillators, Y2SiO5(YSO:Ce), and Gd₃Al₂Ga₃O₁₂(GAGG:Ce), we measured …

Multiple Ways To Implement And Infer Sentience, Nicolas Rouleau, Michael Levin

Animal Sentience

Segundo-Ortin & Calvo’s (S&C’s) thorough review of “plant neurobiology” presents evidence supporting the possibility of plant sentience. They make a compelling case that plants anticipate, assess risk, cooperate, mimic, and pursue goals, as do their animal counterparts. S&C point out that there is a double standard: behavioural patterns associated with subjective experiences in humans are considered valid for inferring cognition in non-human animals but not in diverse other systems including plants. We argue that cognitive functions, including sentience, can potentially be achieved by very different systems and their disparate substrates. We offer some context from the basal cognition literature and …

Mitigating Landslide Hazards In Qena Governorate Of Egypt: A Gis-Based Neutrosophic Paprika Approach, Nabil M. Abdelaziz, Safa Al-Saeed

Neutrosophic Systems with Applications

This paper presents a novel approach to landslide susceptibility assessment in the Qena Governorate, Egypt, integrating the neutrosophic Multi-Criteria Decision-Making (MCDM) method, the Potentially All Pairwise RanKings of all possible Alternatives (PAPRIKA), and the ArcGIS weighted overlay technique. The research focuses on the quantification and prioritization of eight criteria: slope, aspect, proximity to road, soil type, proximity to river, land cover, elevation, and Lithology. These factors are evaluated under the uncertainty and indeterminacy of the neutrosophic environment by employing the PAPRIKA method. The results of the analysis are visualized and interpreted using ArcGIS weighted overlay, offering spatially explicit insights into …

Tailoring The Inherent Properties Of Biobased Nanoparticles For Nanomedicine, Alap Ali Zahid, Aishik Chakraborty, Wei Luo, Ali Coyle, Arghya Paul

Chemical and Biochemical Engineering Publications

Biobased nanoparticles are at the leading edge of the rapidly developing field of nanomedicine and biotherapeutics. Their unique size, shape, and biophysical properties make them attractive tools for biomedical research, including vaccination, targeted drug delivery, and immune therapy. These nanoparticles are engineered to present native cell receptors and proteins on their surfaces, providing a biomimicking camouflage for therapeutic cargo to evade rapid degradation, immune rejection, inflammation, and clearance. Despite showing promising clinical relevance, commercial implementation of these biobased nanoparticles is yet to be fully realized. In this perspective, we discuss advanced biobased nanoparticle designs used in medical applications, such as …

Mitigating Landslide Hazards In Qena Governorate Of Egypt: A Gis-Based Neutrosophic Paprika Approach, Nabil M. Abdelaziz, Safa Al-Saeed

Neutrosophic Systems with Applications

This paper presents a novel approach to landslide susceptibility assessment in the Qena Governorate, Egypt, integrating the neutrosophic Multi-Criteria Decision-Making (MCDM) method, the Potentially All Pairwise RanKings of all possible Alternatives (PAPRIKA), and the ArcGIS weighted overlay technique. The research focuses on the quantification and prioritization of eight criteria: slope, aspect, proximity to road, soil type, proximity to river, land cover, elevation, and Lithology. These factors are evaluated under the uncertainty and indeterminacy of the neutrosophic environment by employing the PAPRIKA method. The results of the analysis are visualized and interpreted using ArcGIS weighted overlay, offering spatially explicit insights into …

Local Chlorhexidine Delivery For Periodontal Infection Therapy: A Short Review, Muhammad Guruh Najmudin, Azizah Intan Pangesty, Rini Riastuti, Sunarso Sunarso, Abdul Halim Abdullah

Journal of Materials Exploration and Findings

Oral diseases affected more than half of the world’s population. Periodontitis is the second biggest threat to oral health after dental caries. Periodontitis is an inflammation inside periodontal pockets caused by pathogenic microbial colonies which lead to destruction of bone tissue and soft tissue. Chlorhexidine gluconate is an antimicrobial agent that effective to destroy pathogenic microbial and cure periodontitis. Chlorhexidine gluconate is given locally using a carrier material to the infected area. There are several materials that can be used to deliver Chlorhexidine gluconate to the infected periodontal tissue such as gel, liquid (mouthwash), and chip. This short review aims …

Optimization Of Alti Pld Coating By Increasing Ti Content, N2 And Annealing Which Used For Skd61 Pins In Aluminum Die Casting, Rusman Kosasih, Maria Margaretha Suliyanti Prof, Dedi Priadi, Wisnu Usni

Journal of Materials Exploration and Findings

The Alumunium Titanium Nitrogen (AlTiN) coating is known as one of the best coating materials for protective coating, while Pulsed Laser Deposition (PLD) is a laser coating process used for electric layer and superconductor applications, producing thin films up to 20 µm in thickness. The combination of these two matters has already been researched and is still in progress. One major challenge in the aluminium casting industry is to minimize the damage caused to tool steel pins made from SKD61, when aluminium material sticks to the pin, and halting production. Therefore, research on effective coatings for tool steels and testing …

Effect Of Heat Input On Microstructure And Mechanical Properties Of Submerged Arc Welded Sm570-Tmc Steel, Toni Yuhandri, Winarto Winarto, Diana Natalia

Journal of Materials Exploration and Findings

SM570TMC is high-strength steel (HSS), which is commonly used in structures that require higher-strength components. In this research, submerged arc welding (SAW)-welded SM570 TMC steels' microstructure and mechanical characteristics were examined. SM570 plates with 12mm thickness were multi-pass welded by using a 3.0 mm diameter of ESAB OK Autrod 13.40 (AWS A5.23: EG) filler metal. The joint design is a single V multi-pass butt weld with a backing strip. Two welded joints were prepared by using heat inputs of 2.2 and 2.9 kJ/mm. The microstructures of two welded joints were observed by using optical microscopy and scanning electron microscope (SEM). …

The Effect Of Current Density And Hard Chrome Coating Duration On The Mechanical And Tribological Properties Of Aisi D2 Steel, Indah Uswatun Hasanah, Dedi Priadi, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The effect of hard chromium coating on AISI D2's mechanical properties and wear resistance has been investigated using the electrolysis technique with varying current and coating duration. The variations of current used are 0.8 A, 1.2 A, and 1.6 A, while the coating duration used are 300, 600 and 900 seconds. Characterization of the films was conducted using SEM-EDS, and XRD. It can be observed from SEM characterization that the chrome grains resulted from the electroplating process are fine. The XRD identify chrome compund on the surface coating. The highest hardness value was 520.6 HV on a sample with a …

Effect Of Internal Curing And Shrinkage-Mitigating Materials On Microstructural Characteristics Of Fiber-Reinforced Mortar, Kamran Aghaee, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Internal curing (IC) and other shrinkage mitigating materials are employed to reduce shrinkage and risk of cracking. This study investigates the efficiency of individual versus combined use of IC and shrinkage mitigating materials on key characteristics of fiber-reinforced mortar (FRM). The investigated mixtures include a 25% pre-saturated lightweight sand (LWS) that is added individually and combined with 10% CaO-based expansive agent (EA) and 2% shrinkage reducing admixture (SRA). This elucidates the synergistic effect of high content IC and EA/SRA on macro- and micro-mechanical characteristics of FRM, especially at the interface of the matrix with fibers. Mechanical properties, microstructural characteristics, and …

Effects Of Poloxamers As Excipients On The Physicomechanical Properties, Cellular Biocompatibility, And In Vitro Drug Release Of Electrospun Polycaprolactone (Pcl) Fibers, Addison Fagile, Rachel Emerine, Shih-Feng Chou

Mechanical Engineering Faculty Publications and Presentations

Electrospun microfibers are emerging as one of the advanced wound dressing materials for acute and/or chronic wounds, especially with their ability to carry drugs and excipients at a high loading while being able to deliver them in a controlled manner. Various attempts were made to include excipients in electrospun microfibers as wound dressing materials, and one of them is poloxamer, an amphiphilic polymer that exhibits wound debridement characteristics. In this study, we formulated two types of poloxamers (i.e., P188 and P338) at 30% (w/w) loading into electrospun polycaprolactone (PCL) fibers to evaluate their physicomechanical properties, biocompatibility, and in vitro drug …

Atomistic Simulations Of Twin Facets Associated With Three-Dimensional { []011 } Twins In Magnesium, Qiyu Zeng, Mingyu Gong, Houyu Ma, Yao Shen, Jian-Feng Nie, Jian Wang, Yue Liu

Department of Mechanical and Materials Engineering: Faculty Publications

Twinning is a deformation mechanism that creates three-dimensional (3D) twin domains through the migration of twin facets. This occurs via the nucleation and glide of twinning disconnections (TDs), which can pile up to create twin facets. A comprehensive under- standing of twin facets associated with 3D twins, including their atomic structures and energies, is crucial for understanding deformation twinning. In this study, we propose a molecular statics/dynamics (MS/MD) approach to determine characteristic twin facets enclosing 3D non-equilibrium/equilibrium { [] 011 } twin domains, which has been much less studied than the counterpart { [] 012 } twin domains. The stability …

Triverus Infiltration And Cleaning Report 2023, Unh Stormwater Center

UNH Stormwater Center

No abstract provided.

Neural Network Models For Generating Synthetic Flight Data, Nathaniel Sisson

Doctoral Dissertations and Master's Theses

Flight test data is a valuable resource used in many aerospace applications. However, procuring a sufficiently large database of flight test data poses several challenges. Nominal flight tests can be expensive and time-consuming and require much post-processing depending on the availability of sensors and the quality of the sensor output. Flight test performed outside of nominal flight conditions, or flight tests in which failures are introduced, add to the inherent risk and danger associated with flight tests. The most popular alternative to flight test, numerical simulations, may fail to fully capture all non-linear behavior. While flight tests will always be …

Calibration Of The Johnson–Cook Model At High Temperatures For An Ultra-High Strength Crnimov Steel, Mario F. Buchely, S. Chakraborty, V. Athavale, Laura Bartlett, Ronald J. O'Malley, D. Field, K. Limmer, K. Sebeck

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a study on the thermo-mechanical behavior of an ultra-high strength CrNiMoV steel at high temperatures and medium strain rates through hot tensile tests. The material was examined in two conditions: as-cast/heat-treated (AC/HT) and as-rolled (AR). Tensile tests were conducted at temperatures of 800,900,1000,1100, and 1200°C, and strain rates of 0.1,1, and 10s−1. Inclusion and porosity analysis was also performed on the tensile specimens. The results revealed that the flow stress decreased by approximately 70% on average from 800°C to 1200°C, while increasing by approximately 32% on average from 0.1s−1 to 10s−1 in strain rate. The elongation exhibited …

The Essential Work Of Fracture In Peridynamics, Christer Stenström, Kjell Eriksson, Florin Bobaru, Stefan Golling, Pär Jonsén

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, the essential work of fracture (EWF) method is introduced for a peridynamic (PD) material model to characterize fracture toughness of ductile materials. First, an analytical derivation for the path-independence of the PD J -integral is provided. Thereafter, the classical J -integral and PD J-integral are computed on a number of analytical crack problems, for subsequent investigation on how it performs under large scale yielding of thin sheets. To represent a highly nonlinear elastic behavior, a new adaptive bond stiffness calibration and a modified bonddamage model with gradual softening are proposed. The model is employed for two …

Microfabrication Of Silicon Carbide And Metallized Polymers Using A Femtosecond Laser, Joseph Taylor Eddy

Theses and Dissertations

Femtosecond lasers deliver a high peak concentration of optical power while maintaining low average power. With an accompanying optical setup, this power can be focused and used for high-precision fabrication of metallized polymers via ablation, creating conductive structures on a thin film. These lasers can also be harnessed in tandem with hydrofluoric acid and the two-photon absorption principle to selectively etch silicon carbide, a very durable and machining-resistant semiconductor with desirable properties. This thesis presents improvements made to the Laser-Assisted Chemical Etching (LACE) technique and the ablation system. ��, the two- photon absorption coefficient of silicon carbide, is measured and …

The Effect Of Heat Treatment And Chemical Treatment On Natural Fibre To The Durability Of Wood Plastic Composites – A Review, Nuratiqah Asyiqin Mohd Nasharudin, Nur Fatihah Sulaiman, Nurul Aziemah Mohammad, Wan Nor Raihan Wan Jaafar, Falah Abu Dr., Siti Norasmah Surip

Journal of Materials Exploration and Findings

The application of WPC is not only limited to indoor applications but has been extended to exterior applications where properties of WPC could compromise during service life. WPC was derived from wood fiber of various sizes to reinforce polymers. Wood fiber has the advantage of a cheaper price, being abundantly available, and ease of processing, however, the critical factor is its hydrophilic nature, where moisture absorption is likely to occur. Thus, treatments for reducing the hydrophilicity of wood fibers are applied. By treatment of wood fiber, the surface impurities were removed, leaving the roughened surface of fibers, thus providing a …

Quantifying Uncertainties In Direct-Numerical-Simulation Statistics Due To Wall-Normal Numerics And Grids, Peng E. S. Chen, Xiaowei Zhu, Yipeng Shi, Xiang I. A. Yang

Mechanical and Materials Engineering Faculty Publications and Presentations

This paper takes the perspective of a user of direct-numerical-simulation (DNS) data and quantifies the uncertainties in DNS statistics for plane channel flows. We focus on high-order statistics, such as skewness, kurtosis, and viscous dissipation, and quantify the uncertainties due to wall-normal numerics and grids while minimizing the sampling error and the discretization error in the wall-parallel directions. Two grid distributions and four discretization methods are considered, which are representative of the existing DNSs. Our results show that the available DNS data contain at least a 7% uncertainty in the computed mean viscous dissipation in the buffer layer. Moreover, since …

Probabilistic Modeling Of North Atlantic Ocean Hurricane Spawn Considering Climate Change, Susmita Bhowmik, Weichiang Pang, Michael Stoner

Publications

Hurricanes are a significant natural hazard, which cause significant damage and financial losses in the coastal areas of the United States almost every year. For example, the devastating nature of North Atlantic Ocean (NAO) storms can easily be understood from the 2005 Hurricane Katrina, which was the most damaging NAO storm in modern history, causing more than 1,800 deaths and a financial loss of at least 161.3 billion USD. It has been found that the formations of hurricanes depend heavily on climate conditions, which implies a direct relationship between the changes in climate extremes and the occurrences of hurricanes or …

Learning Dynamic Information Of High-Dimensional Signal Time-Series Using Advanced Machine Learning/Artificial Intelligence, Guannan Liu

LSU Doctoral Dissertations

In this dissertation, we propose a novel simulation-based device-free indoor localization and tracking system using the received signal strength indicators (RSSIs) of WiFi signals as the input features. The Feko channel-propagation simulation software is used to process the RSSI maps of the given arbitrary indoor geometry. In order to learn the dynamic information of high-dimensional RSSI time-series, we propose three procedures for the localization and dynamic tracking system.

First, The indoor geometry is partitioned into several equi-size zones and the localization problem is treated as the typical \multi-classification" problem. The advanced machine-learning techniques such as decision tree (DT) classifier, random …