Engineering Commons^™

Super-Resolution Textured Digital Surface Map (Dsm) Formation By Selecting The Texture From Multiple Perspective Texel Images Taken By A Low-Cost Small Unmanned Aerial Vehicle (Uav), Bikalpa Khatiwada

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Textured Digital Surface Model (TDSM) is a three-dimensional terrain map with texture overlaid on it. Utah State University has developed a texel camera which can capture a 3D image called a texel image. A TDSM can be constructed by combining these multiple texel images, which is much cheaper than the traditional method. The overall goal is to create a TDSM for a larger area that is cheaper and equally accurate as the TDSM created using a high-cost system.

The images obtained from such an inexpensive camera have a lot of errors. To create scientifically accurate TDSM, the error presented in …

Laboratory Measurements At The Impact Point Of A Falling Jet, Garrett Richins

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dams and spillways play a vital role in managing water resources. Many of these hydraulic structures feature a falling jet when discharging downstream. Engineers design plunge pools to receive jets with enough water depth or a protective liner to protect the river bottom so that scour is avoided. Quantifying the pressures at the bottom of the falling jet is a key component to determining the potential for scour and the need for mitigation techniques.

In the laboratory setting, significant discrepancies have been observed between different measurement methods to measure mean and fluctuating pressures of a falling jet intercepting a solid …

Mission Planning Techniques For Cooperative Leo Spacecraft Constellations, Skylar A. Cox

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research develops a mission planning approach that allows different systems to cooperate in accomplishing a single mission goal. Using the techniques described allows satellites to cooperate in efficiently maneuvering, or collecting images of Earth and transmitting the collected data to users on the ground. The individual resources onboard each satellite, like fuel, memory capacity and pointing agility, are used in a manner that ensures the goals and objectives of the mission are realized in a feasible way. A mission plan can be generated for each satellite within the cooperating group that collectively optimize the mission objectives from a global …

Reclaiming Fault Resilience And Energy Efficiency With Enhanced Performance In Low Power Architectures, Noel Daniel Gundi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Rapid developments of the AI domain has revolutionized the computing industry by the introduction of state-of-art AI architectures. This growth is also accompanied by a massive increase in the power consumption. Near-Theshold Computing (NTC) has emerged as a viable solution by offering significant savings in power consumption paving the way for an energy efficient design paradigm. However, these benefits are accompanied by a deterioration in performance due to the severe process variation and slower transistor switching at Near-Threshold operation. These problems severely restrict the usage of Near-Threshold operation in commercial applications. In this work, a novel AI architecture, Tensor Processing …

Using Computational Fluid Dynamics For Predicting Hydraulic Performance Of Arced Labyrinth Weirs, Shelby J. Koldewyn

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Our world is dynamic and as hydrologic research continues, the magnitude of flood estimates used in hydraulic design for reservoirs has increased. Consequently, many existing spillways are now undersized and unable to meet discharge requirements. These spillways often have a fixed footprint, so nonlinear weirs (e.g., labyrinth weirs) are often a viable solution. For reservoir applications, arcing labyrinth weirs in plan view increases hydraulic efficiency because of better cycle orientation to the approaching flow from the reservoir. This study supplements available physical arced labyrinth weir hydraulic data by observing flow characteristics of two numerical models (α=16°; θ=10° …

Durability Of Wireless Charging Systems Embedded Into Concrete Pavements For Electric Vehicles, Pilaiwan Vaikasi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The interest in electric vehicles (EVs) has been growing around the world significantly. EVs run on electricity by charging power to their batteries. However, a concern in the operation of the EVs is raised because they have an insufficient battery charge to reach their destination. In-motion, inductive power transfer (IPT) embedded into the roadway for the EVs can ease the need to use a charging stationary. This project focused on the durability of the dynamic charging IPT electronics integrated into concrete pavements. This research collaborated with electrical and mechanical engineering colleagues from the Advancing Sustainability through Powered Infrastructure for Roadway …

Long-Distance Recreational Travel Behavior And Implications Of Autonomous Vehicles, Sailesh Acharya

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Have you ever wondered how people travel long distances and how it could be affected by the emergence of autonomous vehicles (AVs)? This dissertation aims to answer those questions by studying the current behavior of long-distance recreational travelers and their preference in the age of AVs. This dissertation has four main goals. First, it seeks to develop a reliable way to measure people’s satisfaction with long-distance recreational trips and understand the similarities and differences between long- and short-distance travel satisfaction. Second, it looks at the connection between how people travel, how satisfied they are with their travel experiences, and how …

Towards Reliable Hepatocytic Anatomy Segmentation In Laparoscopic Cholecystectomy Using U-Net With Auto-Encoder, Koloud Najem Alkhamaiseh

Dissertations

Despite the advantages of minimally invasive surgeries that depend heavily on vision, the indirect access and lack of the 3D field of view of the area of interest introduce some complications in the desired procedures. Fortunately, the recorded videos from these procedures offer the opportunity for intra-operative and post-operative analyses, to improve future performance and safety.

Deep learning models for surgical video analysis could therefore support visual tasks such as identifying the critical view of safety (CVS) in laparoscopic cholecystectomy (LC), potentially contributing to the reduction of the current rates of bile duct injuries in LC. Most bile duct injuries …

Application Of An Adaptive Controller On An Air-Bearing Vehicle-Manipulator System, Samuel Thomas Lovelace

Theses and Dissertations

The growing demand for on-orbit servicing and assembly as well as orbital debris capture and removal poses many engineering challenges. One primary challenge is that of position and attitude control of a spacecraft-manipulator system while performing these operations. Standard control approaches may be used for cases where the dynamics of the objects that the spacecraft-manipulator system interacts with are known are still plausible. However, there will likely be some uncertainty and lack of knowledge of the dynamic properties of orbital debris and parts required for servicing. Therefore, many have proposed the use of adaptive control schemes which can recalculate the …

Electromagnetic Simulations Of The Lansce Chopper Structure, Yusuf Sahin

Electrical and Computer Engineering ETDs

Particle accelerators are important for basic research as well as in applications such as ion implantation and cancer therapy. One important accelerator is the Los Alamos Neutron Science Center (LANSCE) located at Los Alamos National Laboratory (LANL) that primarily produces neutrons for research. The beam chopper simulation described here is a study to provide better modeling of this subsystem of LANSCE. A chopper is a device in which particles are intermittently sliced and directed to a target and/or experiment. The simulations in this thesis are used to analyze the correct operating parameters of the chopper. A good chopper model can …

Comparison Of Random Coupling Model To Stochastic Dyadic Green’S Function When Coupling To A Distributed Port, Evelyn Anne Dohme

Electrical and Computer Engineering ETDs

The Random Coupling Model (RCM) provides statistical representation of coupling between ports in a highly overmoded resonant cavity based on knowledge of radiation impedances of system ports and cavity properties. A recent variant of RCM, the Stochastic Dyadic Green’s Functions (S-DGF), provides the statistical distribution of fields in the cavity. By using Source Reconstruction Methods (SRM) to approximate equivalent surface currents, I hypothesized that the S-DGF can calculate the fields at their location, enabling a statistical estimate of the coupled power. Using nearfield radiation from simple patch antenna simulations and the SRM to estimate the equivalent fields and account for …

Speaker Diarization Of Noisy Classrooms From A Single Microphone Based On An Array Of Virtual Microphones And Machine Learning, Richard Briggs

Electrical and Computer Engineering ETDs

Speaker diarization from a single microphone is extremely challenging in noisy classroom environments. A new method based on simulating a microphone array has shown promising results, while requiring very little training. It used a minimum distance classifier to identify the speaker among a list of possible speakers. This thesis investigates machine learning methods for determining the speaker. The AOLME dataset that was used contains 758 samples totaling 894.4 seconds. Each is taken from a noisy classroom environment, focusing on five speakers - any one of whom could be active in a given sample - lasting an average of 1.2 seconds. …

Fiber-Based Seismic Damage And Collapse Assessment Of Reinforced Concrete Single-Column Pier-Supported Bridges Using Damage Indices, Yu-Fu Ko, Jessica Gonzalez

Mineta Transportation Institute

Near-fault earthquakes can have major effects on transportation systems due to the structural damage they impose on bridges. Therefore, it is imperative to assess the seismic damage of bridges appropriately, and this research focuses on reinforced concrete (RC) bridges. This research advances the seismic performance assessment of RC single-column pier-supported bridges with flexural failure under near-fault ground motion by use of ductility coefficients and damage indices. The methodology included modeling fiber-based nonlinear beam-column elements to simulate the damage development process of RC bridge piers under earthquake loadings, considering the global buckling of longitudinal steel bars, examining the cracking and spalling …

System-Of-Systems Integration For Civil Infrastructures Resiliency Toward Multihazard Events, Vahid Balali

Mineta Transportation Institute

Civil infrastructure systems—facilities that supply principal services, such as electricity, water, transportation, etc., to a community—are the backbone of modern society. These systems are frequently subject to multi-hazard events, such as earthquakes. The poor resiliency of these infrastructures results in many human casualties and significant economic losses every year. An outline of a holistic view that considers how different civil infrastructure systems operate independently and how they interact and communicate with each other is required to have a resilient infrastructure system. More specifically a systems engineering approach is required to enable infrastructure to remain resilient in the case of extreme …

Wind Tunnel Modeling Of The Jack Rabbit Ii Mock Urban Environment Chlorine Releases Based On Comparison With Field Scale Video Record, Samuel Gallimore

Graduate Theses and Dissertations

Unintentional releases of hazardous gases have led to significant injuries and fatalities in severe cases. Field tests can be used to release hazardous gases to document and evaluate the behavior of the gases. Chlorine is an especially hazardous gas due to its toxicity. The Jack Rabbit II Phase I field tests released chlorine within a mock urban environment (MUE) consisting of Conex containers arranged in rows to simulate buildings and streets. The number of field tests is limited by both expense and time. Simulation of a field test using a wind tunnel model can provide additional data and opportunity for …

Chip- And System-Level Reliability On Sic-Based Power Modules, Pengyu Lai

Graduate Theses and Dissertations

The blocking voltage, switching frequency and temperature tolerance of power devices have been greatly improved due to the revolution of wide bandgap (WBG) materials, such as silicon carbide (SiC) and gallium nitride (GaN). Owing to the development of SiC-based power devices, the power rating, operating voltage, and power density of power modules have been significantly improved. However, the reliability of SiC-based power modules has not been fully explored yet. Thus, this dissertation focuses on the chip- and system-level reliability on SiC-based power modules. For chip-level reliability, this work focuses on on-chip SiC ESD protection devices for SiC-based integrated circuits (ICs). …

Bio-Methane Production From Anaerobic Co-Digestion Of Poultry Litter With Wheat Straw Improved By Process Optimization And Employment Of Advanced Techniques, Yuanhang Zhan

Graduate Theses and Dissertations

Anaerobic co-digestion (Co-AD) of poultry litter (PL) and wheat straw (WS) for sustainable waste management and simultaneously renewable bioenergy generation was improved by advanced technologies including micro-aeration (MA), biochar addition (BC), nanoparticles supplementation (NP) and their integrations. Response surface methodology (RSM) and artificial neural network (ANN) were used for the process modeling and optimization. First, a method by gradually increasing OLR was developed for the start-up of Co-AD of PL and WS in an anaerobic sequencing batch reactor (ASBR), with a continuous daily biogas production of (13.06 ± 0.21) L and methane content (MC) of (54.38 ± 0.53) % observed. …

Treating High Salinity Produced Water Using Hybrid Membrane Processes: Electrocoagulation-Microfiltration/Ultrafiltration-Membrane Distillation-Crystallization, Mahmood Gheni Jebur

Graduate Theses and Dissertations

Produced water (PW) is considered the largest industrial wastewater stream in the world. PW generated from oil and gas operations generally contains a range of contaminants including high total dissolved solids, high total suspended solids, polar and nonpolar organic compounds, and low surface tension dissolved species. Treating PW is very challenging and applying only membrane-based technologies is not sufficient due to membrane fouling, which affects their long-term performance. Hence, integrated membrane processes are required to treat PW effectively. Hybrid membrane processes, which may result from combining a conventional process with a membrane separation, could be used to address the issues …

Optocoupler Integration Of Ltcc-Based Gate Driver In A Sic Power Module, Michael Oghenekome Otobo

Graduate Theses and Dissertations

The growing demand for electrical energy in today’s industrialized economy has driven the need for innovative approaches to meet diverse application requirements. Notably, advancements have been made in the field of power electronic systems, as reliable power electronic converters are essential for managing multiple power sources and loads. However, the development of these systems poses challenges related to power device switching speed, system weight and size, and power losses. The integration of a gate driver into a SiC power module offers a solution to many of these challenges, thereby driving the advancement of electrical power density expansion. An LTCC-based gate …

A Real-Time Anpc Inverter Digital Twin With Integrated Design-For-Trust, Paulo Vitor Do Amaral Custodio

Graduate Theses and Dissertations

The demand for renewable energy has increased over the last few years, and so has the demand for greater expectations within the energy market. This increasing trend has been accompanied by more significant usage of internet-connected devices (IoT), leading to critical electrical infrastructure being connected to the internet. Implementing internet connectivity with such devices and systems provides benefits such as improving the system's performance, facilitating irregularity and anomaly mitigation, and providing additional situational awareness for enhanced decision-making. However, enhancing the connected system with IoT introduces a drawback – a greater vulnerability to cyber-attacks. Cyber-attacks targeting critical infrastructure in the electrical …

Development And Validation Of Simulation Protocols For Assessing Stresses In A Network Tied Arch With A Posttensioned Tie Girder, Kanchani Lakamalika Kumari Basnayake Mudiyanselage

Dissertations

Posttensioned concrete members; especially the posttensioned tie girders, are critical load resisting elements in network tied arch bridges. The stresses in the structure are influenced by the prestress losses that depend on the posttension force magnitude, time-dependent concrete modulus of elasticity, and concrete creep and shrinkage. The use of performance-based, high-strength, ternary mixes to promote the carbon neutral concrete and the need for executing multiple construction stages challenge the assessment of the state of stress in a completed bridge. The primary objective of this study is the development and validation of simulation protocols for assessing stresses in a network tied …

Assessment Of Knee Flexion In Young Children With Prosthetic Knee Components Using Dynamic Time Warping, Mark Daniel Geil, Zahra Safaeepour

Faculty Articles

Introduction: Analysis of human locomotion is challenged by limitations in traditional numerical and statistical methods as applied to continuous timeseries data. This challenge particularly affects understanding of how close limb prostheses are to mimicking anatomical motion. This study was the first to apply a technique called Dynamic Time Warping to measure the biomimesis of prosthetic knee motion in young children and addressed the following research questions: Is a combined dynamic time warping/root mean square analysis feasible for analyzing pediatric lower limb kinematics? When provided at an earlier age than traditional protocols dictate, can children with limb loss utilize an articulating …

Lean Manufacturing Approach To Increase Packaging Efficiency, Lina Gozali, Irsandy Kurniawan, Aldo Salim, Iveline Anne Marie, Benny Tjahjono, Yun Chia Liang, Aldy Gunawan, Nnovia Hardjo Sie, Yuliani Suseno

Research Collection School Of Computing and Information Systems

The company upon which this paper is based engages in flexible packaging production, especially pharmaceutical products with guaranteed quality, trusted by consumers. Its production process includes printing, laminating, and assembling processes. Production activities are done manually and automatically using machines, so various types of waste are often found in these processes, making the level of plant efficiency nonoptimal. This study aims to identify wastes occurring in the production process, especially the production of pollycelonium with three colour variants as the highest demand product, by applying lean manufacturing concepts. The Current Value Stream Mapping (CVSM) used to map the production process …

Finite Element Modeling Of Patient-Specific Total Shoulder Arthroplasty, Ignacio Rivero Crespo

Electronic Theses and Dissertations

Total Shoulder Arthroplasty (TSA) is a surgical procedure designed to improve joint functionality by replacing the articulation between the humeral head and the glenoid fossa. Anatomic Total Shoulder Arthroplasty (aTSA) and Reverse Total Shoulder Arthroplasty (rTSA) are two types of replacement surgery to relieve pain and restore function of the shoulder. The overall goal of this study was to evaluate the effects of variation of certain patient and implant alignment parameters that may influence long-term outcomes of these surgical procedures, including kinematics, joint loads and contact mechanics. Computational models of six TSA subjects, three aTSA and three rTSA, were created …

Integrated And Monolithic Iii-Nitride Devices Grown By Mbe, Rohith Allaparthi

Graduate Theses and Dissertations

III-Nitride (III-N) semiconductors with wide bandgap (WBG) characteristics offer promising advancements for high power density, high voltage, and high-frequency applications, presenting a promising alternative to traditional silicon (Si) technology. However, native substrate material for the majority of WBG semiconductors is still not commercially affordable. Because of its highly mature progression, utilizing standard Si wafers as substrates is a cost-effective alternative. This dissertation explores the development of electronic devices based on III-N thin films, grown monolithically via molecular beam epitaxy (MBE), followed by several processing techniques. Initially, a heterojunction p-n diode is realized, incorporating the growth of single-crystal WBG AlN films …

Modeling & Small Signal Analysis Of Grid Forming Inverter, Kadesh Hepburn

Graduate Theses and Dissertations

There is a rising number of inverter-based resources (IBRs) being integrated with distribution systems are becoming a more common occurrence. With integration of IBRs inverters, power utilities are experiencing an increase of number of operations with regards to voltage and frequency support. To maintain grid stability and reliability, IBRs need to provide some of the services currently (or formerly) provided by synchronous generators. Interconnection standards, like the IEEE 1547. 2018 has include requirements for IBRs to have the capability to provide some of these services—such as frequency and voltage support—and the procurement and deployment of the services can be implemented …

Liquid Crystalline Coacervates Composed Of Chromonic Mesogens And Polyelectrolytes, Elizabeth Adeogun

Graduate Theses and Dissertations

Complex coacervates are formed by liquid-liquid phase separation of an aqueous solution of oppositely charged ions. Although several mixtures of molecules of natural and synthetic macro-ion have been shown to form complex coacervates, the formation of liquid crystalline (LC) coacervates are sparsely reported. LC coacervates have a unique property in that they can change their shape and optical property in response to external stimuli such as changes in temperature, pH, or the presence of specific molecules. This property makes LC coacervates useful as a sensor, as they can be engineered to respond to specific stimuli and generate a measurable signal …

Investigation Of The Flow Field In The Jack Rabbit Ii Mock Urban Environment Field Tests Using A 1:50 Scale Wind Tunnel Model, Paulo Victor De Freitas Lopes

Graduate Theses and Dissertations

Accidental release of toxic chemicals can put workers and nearby populations at significant risk. Consequence assessment of accidents in urban environments is of particular interest. Urban geometries create wind channels between buildings, along with particularly dangerous areas downwind of buildings, where near-stagnant flow is present. Furthermore, recirculation zones can be formed between buildings, trapping high concentrations of toxic gases at ground level, particularly for denser-than-air gases. In 2015, the Department of Homeland Security conducted the Jack Rabbit II Field Test (JR-II) at Dugway Proving Ground, UT. During JR-II, chlorine was released at the center of a Mock Urban Environment (MUE) …

Understanding Peripheral Blood Pressure Signals: A Statistical Learning Approach, Md Abul Hayat

Graduate Theses and Dissertations

Proper estimation of body fluid status for human or animal subjects has always been a challenging problem. Accurate and timely estimate of body fluid can prevent life threatening conditions under trauma and severe dehydration. The main objective of this research is the estimation, classification and detection of dehydration in human and animal subjects using peripheral blood pressure (PBP) signals. Peripheral venous pressure (PVP) and peripheral arterial pressure (PAP) signals have been investigated in this research. Both PVP and PAP signals are PBP signals. A dataset of PVP signals was collected using standard peripheral intravenous catheters from human subjects suffering from …

Achieving High Renewable Energy Integration In Smart Grids With Machine Learning, Yaze Li

Graduate Theses and Dissertations

The integration of high levels of renewable energy into smart grids is crucial for achieving a sustainable and efficient energy infrastructure. However, this integration presents significant technical and operational challenges due to the intermittent nature and inherent uncertainty of renewable energy sources (RES). Therefore, the energy storage system (ESS) has always been bound to renewable energy, and its charge and discharge control has become an important part of the integration. The addition of RES and ESS comes with their complex control, communication, and monitor capabilities, which also makes the grid more vulnerable to attacks, brings new challenges to the cybersecurity. …