Engineering Commons^™

Healthcare Built Environment And The Covid-19 Pandemic, A Mixed-Method Study, Mohammad Saleh Nikooopayan Tak

All Theses

The outbreak of COVID-19 presented an unparalleled risk to public health, leading to urgent scientific efforts in understanding transmission mechanisms and mitigating risks, especially in healthcare settings. This mixed-methods study examines knowledge advancement regarding indoor air quality in healthcare facilities during the pandemic. A systematic literature review of 163 post-COVID studies identifies key research thrusts and 31 recommendations related to building ventilation, air filtration, surface disinfection, and monitoring. Comparison with over 200 pre-pandemic publications reveals both reliance on established infection control principles and unique contributions, such as detecting viral RNA in air and surface samples indicating potential airborne and fomite …

The Effects Of Compression Wrapping Techniques And Primary Wound Dressings On Leg Skin Interface Pressure, James Cox

All Theses

Peripheral edema affects approximately 20% of people in the US over the age of 50 and is frequently encountered among individuals with conditions such as heart disease, prolonged immobility, and venous insufficiency.¹ Compression is an established therapeutic tool utilized for the management of several chronic edema presentations including lymphedema and venous leg ulcers.^2,3 Therapeutic efficacy of compressive applications can be evaluated by defining interface pressure (IP) and IP distributions associated with specific textile combinations.² During compressive applications where an open wound is present, primary wound dressings should be used in combination with compressive wraps. Primary wound dressings …

The Extent Of Drone Education Being Taught In Asc Schools To 4-Year Construction Students, Cheran Teja Dumpati

All Theses

The technology of Unmanned Aircraft Systems (UAS) is growing rapidly in many fields and has become one of the skills in demand in the industry. Universities are one of the primary sources of teaching drone technology with a career-oriented approach. The goal of this study is to investigate the content of the drone curriculum being taught in Associated Schools of Construction (ASC) schools. This includes the topics covered, practical training offered, and the key deliverables taught. This information serves as a foundation for the schools that are looking forward to start drone courses in their department. The research found that …

Integrated Energy-Aware Motion Planning And Charge Scheduling Of Unmanned Aerial Vehicles, Hayleyesus Alemayehu

All Theses

The growing demand for unmanned aerial vehicles (UAVs) is driven by their operational convenience, cost-effectiveness, availability, and adaptability to various scenarios. In energy-constrained environments, optimizing energy consumption and ensuring a continuous power supply for UAVs is crucial for mission success. The objective of this thesis is to address this issue by integrating energy-aware motion planning and charge scheduling for UAVs by utilizing a charger hosted on an unmanned ground vehicle (UGV), whose rendezvous locations and routes are jointly computed to minimize overall energy consumption.

This thesis proposes a hierarchical trajectory and control framework comprising local and global planners for each …

Design And Fabrication Of An Optical Blade Tip Timing Sensor, Nick Tomlinson

All Theses

Electricity is a vital energy source that powers modern technology. Turbines are heavily relied on in the electric power industry for the conversion of natural energy sources into electricity. These turbines operate under harsh conditions which increase the likelihood of blade damage. Structural health monitoring of a turbine’s blades is important to detect problems before a blade experiences failure. The blade tip timing method can be used to monitor blade vibrations and determine if damage has occurred. An optical blade tip timing sensor is designed and fabricated to advance the field of sensing in the power industry.

The Effect Of Deployment And Optimal Dispatch Of Shared Electric Shuttles On The Energy Efficiency Of Campus Transit, Robert Smith

All Theses

A problem facing most public transit systems is low energy efficiency and the continued cycling of large transport vehicles such as buses at low occupancy when low demand for transport exists, wasting energy to no benefit. To remedy this issue, we propose a hybrid system consisting of existing diesel buses and automated electric shuttles to augment the system during off-peak hours. Due to their smaller size, higher occupancy, and more efficient powertrains, these shuttles could reduce the system energy used per passenger-mile-traveled. Automation removes the labor cost of drivers and, thus, eliminates the need to employ more drivers for the …

Investigation Into The Load Transfer Mechanism Of Trees To Develop An Innovative Foundation Configuration Using 3d Finite Element Modeling, Kaleb Boland

All Theses

This study was inspired by a tree’s reliance on its root system that enables it to withstand a natural disaster, such as an extreme hydroclimatic event or hurricane. This curiosity has led to an investigation into what makes this possible, developing a new and innovative foundation configuration for infrastructure systems, and a new possible construction material and method. This study provides results on a material that does not have conventional testing procedures or standards: a tree root. The trees studied are common to the upstate of South Carolina, which are Pine, Sweetgum, and White Oak. According to the results, on …

Influence Of Swirl And Turbulence In The Particle Removal Using Fog In A Pipe Flow, Nisarg T. Patel

All Theses

Fog-and-tube scrubbers are employed to remove harmful ultrafine aerosols, such as Diesel particulate matter (DPM), from an airflow. The underlying principle of this removal process involves enlarging the aerosol particles by coagulating them with fog drops, which are subsequently eliminated through inertial impaction onto the tube wall. Previous research conducted by Tabor et al. (2021) demonstrated an increase in scavenging of ultrafine DPM particles, ranging from 11.5 nm to 154 nm, by as large as 45% over the no fog case. This finding is crucial in addressing the challenges associated with conventional filtration methods for capturing ultrafine particles.

The present …

Digital Twins And Artificial Intelligence For Applications In Electric Power Distribution Systems, Deborah George

All Theses

As modern electric power distribution systems (MEPDS) continue to grow in complexity, largely due to the ever-increasing penetration of Distributed Energy Resources (DERs), particularly solar photovoltaics (PVs) at the distribution level, there is a need to facilitate advanced operational and management tasks in the system driven by this complexity, especially in systems with high renewable penetration dependent on complex weather phenomena.

Digital twins (DTs), or virtual replicas of the system and its assets, enhanced with AI paradigms can add enormous value to tasks performed by regulators, distribution system operators and energy market analysts, thereby providing cognition to the system. DTs …

Mirror Position Detection In A Catoptric Surface, Run Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

The Catoptric Surface research project is a pioneering exploration of controlling daylight effects within built environments. In this thesis, we focus on the mirror position detection problem, which plays a vital role in achieving dynamic control over the direction of reflected light within a space. To address the challenge of mirror position detection, we employ computer vision techniques, specifically edge detection and the RANdom SAmple Consensus (RANSAC) algorithm. Edge detection is utilized to identify significant changes in intensity or color, corresponding to object boundaries, while RANSAC is applied for ellipse fitting. By iteratively selecting minimal subsets of points and fitting …

Carbon Fibers From Athabasca Oil-Sand Asphaltenes, Blake Reardon

All Theses

Carbon fibers possess ultra-high specific strength and modulus. Therefore, the material is popular in aerospace, automotive, and sports industries. Approximately 95% of all carbon fibers are spun from a high-cost precursor, polyacrylonitrile (PAN). There is a need for a cheaper grade of carbon fiber for low-cost applications because about half of carbon fiber cost is associated with precursor cost. A promising alternative to the high-cost PAN precursor is petroleum-based asphaltene. Asphaltenes are highly aromatic and have a high carbon content but lack the purity of the PAN precursor. Processes like the molten- sodium desulfurization upgrading have been used to harvest …

Design Of Microwave Superconducting Resonators For Materials Characterization, Xinyi Zhao

McKelvey School of Engineering Graduate Student Theses & Dissertations

A resonator is a specialized device capable of storing and transferring energy at precise frequencies. Resonators find widespread use in various fields, such as electrical engineering, physics, and material science, owing to their exceptional ability to accurately measure, filter, and amplify signals. Different types of resonators exist, but coplanar waveguide (CPW) and coupled coplanar waveguide (CCPW) resonators are popular due to their high-frequency operation and easy integration into microfabrication processes.

All Hands On Deck: Choosing Virtual End Effector Representations To Improve Near Field Object Manipulation Interactions In Extended Reality, Roshan Venkatakrishnan

All Dissertations

Extended reality, or "XR", is the adopted umbrella term that is heavily gaining traction to collectively describe Virtual reality (VR), Augmented reality (AR), and Mixed reality (MR) technologies. Together, these technologies extend the reality that we experience either by creating a fully immersive experience like in VR or by blending in the virtual and "real" worlds like in AR and MR.

The sustained success of XR in the workplace largely hinges on its ability to facilitate efficient user interactions. Similar to interacting with objects in the real world, users in XR typically interact with virtual integrants like objects, menus, windows, …

A Unit-Load Approach For Reliability-Based Design Optimization Of Linear Structures Under Random Loads And Boundary Conditions, Robert James Haupin, Gene Jean-Win Hou

Mechanical & Aerospace Engineering Faculty Publications

The low order Taylor’s series expansion was employed in this study to estimate the reliability indices of the failure criteria for reliability-based design optimization of a linear static structure subjected to random loads and boundary conditions. By taking the advantage of the linear superposition principle, only a few analyses of the structure subjected to unit-loads are needed through the entire optimization process to produce acceptable results. Two structural examples are presented in this study to illustrate the effectiveness of the proposed approach for reliability-based design optimization: one deals with a truss structure subjected to random multiple point constraints, and the …

Fault Tolerant Electric Machine Concept For Aircraft Propulsion With Pm Rotor And Dc Current Stator Dual-Stage Excitation, Donovin D. Lewis, Oluwaseun A. Badewa, Ali Mohammadi, Matin Vatani, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

The development of electrically propelled aircraft requires electric machines that are fault-tolerant, compact, and efficient at multiple operating points. This paper proposes a novel machine topology combining a coreless Halbach PM array axial flux unit and a PM-less synchronous hybrid excited radial flux unit. Both units are coupled on the same shaft to take advantage of the opportunities available in the unique usage profile for aviation. The machines can be used simultaneously for the take off and altitude climbing stage or used individually during the cruising stage. The coreless axial flux PM (CAFPM) motor unit consists of two Halbach array …

Coreless Axial Flux Halbach Array Permanent Magnet Generator Concept For Direct-Drive Wind Turbine, Matin Vatani, Ali Mohammadi, Donovin Lewis, John F. Eastham, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

This paper proposes a concept for a coreless axial flux permanent magnet (CAFPM) generator with a double sided Halbach array rotor for direct-drive offshore wind turbine applications. The application of printed circuit board (PCB) technology is explored as applied to a concentrated winding stator due to its high reliability, repeatability, and fast mass production. A double-sided Halbach array rotor is employed to intensify the airgap flux density and to enable the elimination of the rotor back iron, decreasing the generator’s total active mass. The effect of the Halbach array rotor pole number and magnet-to-magnet (M2M) gap on the airgap flux …

Characteristics Of Refractivity And Sea State In The Marine Atmospheric Surface Layer And Their Influence On X-Band Propagation, Douglas Matthew Pastore

Electronic Theses and Dissertations

Predictions of environmental conditions within the marine atmospheric surface layer (MASL) are important to X-band radar system performance. Anomalous propagation occurs in conditions of non-standard atmospheric refractivity, driven by the virtually permanent presence of evaporation ducts (ED) in marine environments. Evaporation ducts are commonly characterized by the evaporation duct height (EDH), evaporation duct strength, and the gradients below the EDH, known as the evaporation duct curvature. Refractivity, and subsequent features, are estimated in the MASL primarily using four methods: in-situ measurements, numerical weather and surface layer modeling, boundary layer theory, and inversion methods.

The existing refractivity estimation techniques often assume …

Combining Semi-Continuous And Discrete Water Quality Data To Characterize Solute Transport, Biogeochemical Processes, And Wildfire Disturbances In Fluvial Systems, Justin Rae Nichols

Civil Engineering ETDs

In the past decade, high-frequency water quality sondes have become more abundant in watersheds across North America and Europe and are gaining a foothold in Asia and South America. In this dissertation, three relevant topics associated with high-frequency data are investigated, i.e., the impact of winter’s precipitation on surface water quality and stream metabolism, the longitudinal propagation of wildfire disturbances through a fluvial network, and the use of machine learning with high-frequency data to estimate fluvial nutrient processing. First, we found that significant snow precipitation can cause surface water anoxia and declines in stream metabolism. Second, our data illustrate that …

Phase Stability Of Lead Phosphate Apatite, Jiahong Shen, Dale Gaines Ii, S. Shahabfar, Zi Li, Dohun Kang, Sean Griesemer, Adolfo Salgado-Casanova, Tzu-Chen Liu, Yi Xia, Multiple Additional Authors

Mechanical and Materials Engineering Faculty Publications and Presentations

Recently, Cu-substituted lead apatite LK-₉₉ was reported to have room-temperature ambientpressure superconductivity. Here we utilize density functional theory (DFT) total energy and harmonic phonon calculations to investigate the thermodynamic and dynamic stability of two lead phosphate apatites in their pure and Cu-substituted structures. Though Pb₁₀(PO₄)₆O and Pb₁₀(PO₄)₆(OH)₂ are found to be thermodynamically stable (i.e., on the T=₀K ground state convex hull), their Cu-substituted counterparts are above the convex hull. Harmonic phonon calculations reveal dynamic instabilities in all four of these structures. Oxygen vacancy formation …

Assessment Of Integrated Nutrient Management Practices On Soil Health And Nitrogen Efficiency In Cropping Systems, María José Oviedo Ventura

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Groundwater quality in Nebraska is threatened by non-point source contributions of nitrate-nitrogen, primarily by agricultural systems. Intensive crop and livestock production that neglects the value of manure in crop fertility plans can contribute to soil degradation and natural resource impairment. The purpose of this study is to evaluate opportunities to improve agricultural nutrient management throughout Nebraska by quantifying opportunities for manure distribution, evaluating soil health implications of organic and inorganic soil amendments, and assessing nutrient management practices focused on reducing nitrate leaching in agricultural soils.

This study described in Chapter 2 provides a spatial illustration of nitrogen and phosphorus balances …

Model Optimization And Applications In Deep Learning, Chengchen Mao

Electrical Engineering Dissertations - Archive

ABSTRACT: Machine learning refers to a machine or an algorithm that draws experience from data. A certain pattern is found to build a model, which is used to solve real problems. Deep learning, an important branch and extension of machine learning, employs a neural network structure containing multiple hidden layers. It learns critical features of the data by combining lower-level features to form more abstract higher-level representations of attribute categories or features. In this dissertation, deep learning network models were applied to sense-through-foliage target detection and extended with Rake structure. The deep learning network models had a large number of …

Environment, Communication And Decision For Multiagent Systems, Lu Zhao

Electrical Engineering Dissertations - Archive

ABSTRACT: Multiagent systems (MAS) are ubiquitous in modern systems and have found broad applications, such as in intelligent transportation systems (ITS). Environment, communication and decision are among the essential components of MAS. The realistic environment in which MAS operates is usually stochastic, and its modeling, identification and estimation are important to consider. The communication in MAS is also critical for decisions. For example, in ITS, to improve travel efficiency and reduce traffic accidents, scheduling schemes for Vehicle-to-Everything (V2X) communication need to be developed. MAS decisions also need to be robust to uncertainties. For example, in mixed-traffic autonomous driving, the decisions …

The Application Of Model Predictive Control On Paralleled Converters For Zero Sequence Current Suppression And Active Thermal Management, Justin Dobey

All Theses

In the field of power electronics, the control of rectifiers is a crucial area of study. Rectifiers are used to convert AC power into DC power, and are commonly used in a wide range of applications, including renewable energy systems, industrial automation, and consumer electronics. However, in medium and high-power systems when multiple rectifiers are connected in parallel to a DC bus, stability issues can arise, including voltage fluctuations, zero sequence circulating current, and thermal imbalance.

Achieving stable DC bus voltage is essential for maintaining the proper functioning of electronic devices, while suppressing zero sequence current is necessary for protecting …

Evaluating The Feasibility Of Using Strain Measured During Sinusoidal Rate Pumping Tests To Characterize An Aquifer, Riley Blais

All Theses

Pumping tests with sinusoidal variation in pumping rate have been proposed as a method for improving aquifer characterization. These tests can interrogate a larger aquifer volume than slug tests and they can be more sensitive to small variations in drawdown. Current methods of using sinusoidal variations of rate are based on measuring pressure signals from the reservoir or aquifer, which requires access to monitoring wells. An alternative approach has been developed that measures the strain in the vadose zone instead of pressure in the reservoir. An instrument has been developed at Clemson University that can measure small strains using optical …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Modeling Heat Propagation And Thermal Enhanced Decay In A Solar Thermal Remediation System, Justin Trainor

All Theses

Low temperature solar thermal remediation is designed to accelerate ongoing biotic and abiotic treatment processes at a much lower temperature and cost than high temperature thermal remediation strategies. An array of borehole heat exchangers are used to circulate a solar-heated fluid through a closed-loop system of thermally conductive pipes. Thermal energy heats the surrounding contaminated zone through the process of thermal conduction which serves to enhance the degradation of the contaminant.

A three dimensional analytical solution was previously constructed to model heat propagation from borehole heat exchangers into the surrounding subsurface. The model utilizes a system of finite line sources …

Effect Of Impurities In Plastic Waste On The Performance Of Plastic Road, Niloy Gupta

Civil Engineering Dissertations - Archive

Plastic waste generation has become a global concern, with a large portion of plastics ending up in landfills. China's recent decision to stop importing waste from various countries, including the USA, has exacerbated the issue of plastic pollution. These plastics, as coming from the household and commercial trash, contain impurity and contamination. This makes the recycling process of plastics more hectic and causes issues in reusing them for other purposes. Impurity and contamination, in fact, is a major issue in material science. Researchers have been studying ways to improve the performance of bituminous pavement, as highways are experiencing increased demand …

Analysis Of The Impact Of Covid-19 On Construction Cost And Schedule Overruns, Nikhitha Adepu

Civil Engineering Dissertations - Archive

The construction industry, renowned for its dynamic nature, encountered unprecedented uncertainties throughout its history. However, the advent of the COVID-19 pandemic served as a powerful catalyst, underscoring the urgent need for a deeper comprehension of the challenges it introduced and their potential implications for the industry's future. While numerous studies have explored this topic, a comprehensive understanding of the specific factors that disrupted the construction sector during the pandemic remains elusive. To bridge this knowledge gap, this study identifies, categorizes, and ranks these challenges, while also proposing effective management strategies to mitigate their detrimental impact on construction projects. To lay …

A Comparison Of Fixed Versus Moving Eulerian Meshes For 1-D Radiative Shock Problems, Dylan Weatherred

Nuclear Engineering ETDs

Testing codes used to solve the radiation-hydrodynamics equations requires the use of radiative shock problems. These problems contain stiff shocks and test the coupling of the material motion and the energy exchange between the radiation and material. However, these problems are difficult to solve due to large differences in time scale between radiation and material equations, resolving shocks, and modeling radiation and material interactions. This thesis will look to solve radiative shock problems in 1-D using the Eulerian formulation on fixed and moving meshes. The moving mesh method proposed takes advantage of the more simple Eulerian formulation of the radiation …

Multiple Uncertain Robot Manipulator Control For A Modular System, Thitiphun Vongkunghae

Doctoral Dissertations and Master's Theses

Modular systems have gained significant attention in various domains due to their flexibility, scalability, and adaptability. These systems consist of multiple interconnected modules that can be combined and reconfigured to achieve desired functionalities. The modular approach offers numerous advantages, including ease of maintenance, reduced downtime, and cost-effectiveness. However, designing effective distributed control strategies for modular systems presents unique challenges. Specifically, modular systems that consist of robot manipulators are subject to non-linear unknown terms as well as unknown effects. This thesis focuses on developing and designing a distributed model reference adaptive controller for a robotic modular system that is subject to …