Engineering Commons^™

Truck Platooning Effects On Girder Bridges: Phase Ii-Service, Joshua Steelman, Jay Puckett, Daniel Linzell, Bowen Yang

Nebraska Department of Transportation: Research Reports

Truck platooning—wirelessly linking two or more trucks to travel in a closely spaced convoy—is federally promoted to save fuel, improve the environment, and improve traffic operations. Platooning places trucks much closer than current design codes anticipate. While this strategy can provide higher fuel efficiency, it also can potentially overload structures. Previous reliabilitybased studies (Steelman et al., 2021; Yang et al., 2021) have focused on the Strength I limit state and have shown that trucks can operate at weights exceeding standard legal load limits even with short headways at operating-level reliability. However, service limit states in the AASHTO LRFD Bridge Design …

Investigating Bismuth As A Surrogate For Plutonium Electrorefining, Greg Chipman

Theses and Dissertations

Conducting research experiments on plutonium electrorefining is difficult due to the significant hazards and regulations associated with nuclear materials. Finding a surrogate for plutonium electrorefining studies would enable more fundamental research to be conducted. Potential surrogates were identified by determining the physical properties required to conduct electrorefining using a molten metal and molten salt in CaCl2 at 1123 K. More potential surrogates were identified by changing the matrix salt to be a LiCl-KCl-CaCl2 eutectic salt with electrorefining conducted at 673-773 K. Ce-CeCl3, In-InCl3, Zn-ZnCl2, Sn-SnCl2, and Bi-BiCl¬3 were investigated as potential plutonium electrorefining surrogates. Ce electrorefining in molten CaCl2 resulted …

Ranking And Analysis The Strategies Of Crowd Management To Reduce The Risks Of Crushes And Stampedes In Crowded Environments And Ensure The Safety Of Passengers, Waleed Tawfiq Al-Nami

Neutrosophic Systems with Applications

Public gatherings, transit hubs, stadiums, and crowded retail malls are just a few examples of places where crowd management has become an urgent issue in recent years. Effective crowd management strategies have been required due to the increasing population, urbanization, and frequency of large-scale meetings. These strategies are used in dynamic, sometimes chaotic, circumstances to protect people and facilitate their free movement. The purpose of this study is to analyze and rank various strategies for crowd management to reduce the risks of crushes and stampedes, improve security, and facilitate smoother traffic flow. This study used the single-valued neutrosophic set to …

Performance Analysis Of Vlc-Based Infrastructure-To-Vehicle Communication, Noura Elshabasy, Samy S. Soliman, Mohammad Abdellatif

Electrical Engineering

Infrastructure such as traffic signals are expected to communicate various safety messages as a part of the evolution of smart transportation networks. It is anticipated that hybrid Vehicle to Vehicle (V2V) and Infrastructure to Vehicle (I2V) communication links would be taken into account to further enhance the system performance and expand the reach and capacity of the network. This paper proposes a visible light communication (VLC) link by installing multiple Photo-Detectors (PDs) in I2V links in order to improve the Bit Error Rate (BER) performance of the system. The paper investigates the effect of the distances and received powers on …

Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman

Chemical Engineering

In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …

Salts Removal As An Effective And Economical Method Of Bakken Formation Treatment, Mousa Almousa, Olusegun Stanley Tomomewo, Yeo Howe Lim

Civil Engineering Posters and Presentations

One of the main aims of managing and containing waste disposal in deep rock formations is to safeguard individuals, the surroundings, and the groundwater reserves The elevated salt content of the water produced by the rock formation necessitated an analysis of its chemical composition, including its major ion content, in order to understand the characteristics of the rock Additionally, the total dissolved solids ( in the ND Bakken formation are greater than 300 g/l, which is much higher than the concentration of salt in seawater therefore, it is reasonable to propose a modified process to treat the salts found in …

Ranking And Analysis The Strategies Of Crowd Management To Reduce The Risks Of Crushes And Stampedes In Crowded Environments And Ensure The Safety Of Passengers, Waleed Tawfiq Al-Nami

Neutrosophic Systems with Applications

Public gatherings, transit hubs, stadiums, and crowded retail malls are just a few examples of places where crowd management has become an urgent issue in recent years. Effective crowd management strategies have been required due to the increasing population, urbanization, and frequency of large-scale meetings. These strategies are used in dynamic, sometimes chaotic, circumstances to protect people and facilitate their free movement. The purpose of this study is to analyze and rank various strategies for crowd management to reduce the risks of crushes and stampedes, improve security, and facilitate smoother traffic flow. This study used the single-valued neutrosophic set to …

Static Malware Family Clustering Via Structural And Functional Characteristics, David George, Andre Mauldin, Josh Mitchell, Sufiyan Mohammed, Robert Slater

SMU Data Science Review

Static and dynamic analyses are the two primary approaches to analyzing malicious applications. The primary distinction between the two is that the application is analyzed without execution in static analysis, whereas the dynamic approach executes the malware and records the behavior exhibited during execution. Although each approach has advantages and disadvantages, dynamic analysis has been more widely accepted and utilized by the research community whereas static analysis has not seen the same attention. This study aims to apply advancements in static analysis techniques to demonstrate the identification of fine-grained functionality, and show, through clustering, how malicious applications may be grouped …

Final Report - Augmenting Bridge Inspection With Augmented Reality And Haptics Based Aerial Manipulation, Paul Oh, Blake Hament, Dongbin Kim

Project AS-7

Insight and leverage from prior project identified the need for haptics; the inspector’s sense of touch is often used in bridge assessment. Envisioned is the augmentation of bridge personnel by providing a haptics-based aerial manipulator. Such a manipulator would reduce needs to ascend elevated structures like under bridge decks and cabling. There is recent work that uses haptics in aerial manipulation. But these center on autonomous multi-drone flight formation for aerial shows or cooperative object delivery and are relatively straight-forward. The sense of touch is used to provide spatial distance between drones. By contrast, this proposal’s novelty and merit are …

End To End Routing Algorithms In Arbitrary Networks, Nada Alzaben

Computer Science and Engineering Theses and Dissertations

The End to End Routing Problem in computer communication networks is the problem of scheduling fixed routes through the network over time. All the packets in a single communication flow follow an assigned route and all flows are routed such that some function of the flows is optimized. A flow is a sequence of packets that are released by some source node and sent over the communication network to a destination node. Multiple objective functions may be used to evaluate the performance of the network. Common objective functions include minimize the mean wait time, minimize the total wait time, minimize …

Unlocking Insights Into Crop Growth And Nutrient Distribution: A Geospatial Analysis Approach Using Satellite Imagery And Soil Data, Olatunde D. Akanbi, Brian Gonzalez Hernandez, Erika I. Barcelos, Arafath Nihar, Laura S. Bruckman, Yinghui Wu, Jeffrey Yarus, Roger H. French

Student Scholarship

Accurate monitoring of crop growth and nutrient distribution is crucial for optimizing agricultural practices, promoting a sustainable environment, and ensuring long-term food production. In this study, we propose a novel and comprehensive approach to monitor crop growth and nutrient distribution in large-scale agricultural landscapes. Our methodology combines advanced geospatial and temporal analysis techniques, providing valuable insights into the intricate relationships between crop health, soil nutrients, and other essential soil properties.

To monitor vegetation dynamics, we obtained data from the IBM EIS (Environment Intelligence Suite) and processed it using our HPC (High-Performance Computing) infrastructure. This is ingested into our CRADLE (Common …

Influence Of Ultrasound Machine Settings On Quantitative Measures Derived From Spatial Frequency Analysis Of Muscle Tissue, Scott K. Crawford, Stephanie A. Kliethermes, Bryan C. Heiderscheit, Greg Bashford

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background Ultrasound is a powerful tool for diagnostic purposes and provides insight into both normal and pathologic tissue structure. Spatial frequency analysis (SFA) methods characterize musculoskeletal tissue organization from ultrasound images. Both sonographers in clinical imaging and researchers may alter a minimized range of ultrasound settings to optimize image quality, and it is important to know how these small adjustments of these settings affect SFA parameters. The purpose of this study was to investigate the effects of making small adjustments in a typical default ultrasound machine setting on extracted spatial frequency parameters (peak spatial frequency radius (PSFR), Mmax, Mmax%, and …

Optimized Beam-Forming For Massive Mimo- Ofdm System, Nelly M. Shafik, Hazem H. El-Banna

Mansoura Engineering Journal

Massive Multiple-Input Multiple-Output (MIMO) wireless communication systems, achieved by large number of antennas, is the main secrete of Fifth Generation (5G) wireless communication networks powerful. In this paper, novel active antennas selection algorithm is proposed with resulted in efficient system performance with only half number of antenna elements. In order to gain optimum performance of massive MIMO wireless communication systems, it is vital to well analyze channel models which is glory indication for massive MIMO system characteristics. In this paper, MIMO system is simulated in bad frequency selective fading channel which is considered the most matching channel in case of …

Utilizing Waste Latex Paint Toward Improving The Performance Of Concrete, Mohamed Leithy, Eslam Gomaa, Ahmed A. Gheni, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, incorporating the waste latex paint (WLP) into the conventional concrete as a partial replacement of sand to improve its durability was investigated. The fresh and hardened characterizations, in addition to the durability of concrete, were examined. The slump test was used to evaluate the fresh properties, while the hardened properties were evaluated through the volume of voids and absorption rate, in addition to the compressive, splitting tensile, and flexural strengths tests. The durability performance was evaluated by the surface resistivity, bulk electrical resistivity, as well as freeze and thaw resistance tests. The results showed a reduction in …

Behavior Of Ultrahigh-Performance Concrete Plates Encasing Steel H-Piles, Mohamed Elgawady, Binod Shrestha

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel H-piles are exposed during their service life to wet-dry cycles in combination with salts, such as deicing, that may result in corrosion, leading to cross-sectional loss and reduction in axial load-carrying capacity. This paper proposes an innovative repair method for corroded steel H-piles using ultrahigh-performance concrete (UHPC) plates. The UHPC plates are reinforced with carbon fiber-reinforced polymer (CFRP) grids. The UHPC plates bridge the corroded segment so that the axial force bypasses the corroded segment. The UHPC are bolted to the steel H-pile using high-strength bolt connectors (HSBCs). Eleven steel H-piles bolted with UHPC plates were investigated experimentally under …

Improving Peripheral Nerve Regeneration Through Rehabilitation And Biomaterial-Based Drug Delivery Strategies, Yunfan Kong

Theses & Dissertations

Peripheral nerve injury (PNI) is a common problem worldwide, with trauma being a common cause. PNI can lead to loss of sensory and motor functions, chronic neuropathic pain, and mental health issues, significantly impacting patients' family life, work, and social situation. Recent studies revealed that beyond the topical injury site at peripheral nerves, PNIs can also induce dysfunctions in the central nervous system (CNS) by causing maladaptive plasticity, which will result in exaggeration and exacerbation of the pathological condition caused by primary injuries. The common therapy strategies for PNI treatment are using sutures, nerve autografts or conduits in cases requiring …

The Effects Of Mechanical Strain On Vascular Calcification And The Canonical Wnt Pathway, Hannah E. Douglas

Theses and Dissertations

Cardiovascular disease is a significant health crisis, representing 32% of deaths worldwide in 2019. Vascular calcification (VC), a major contributor to cardiovascular disease, is a regulated biomineralization process whose exact mechanisms are unknown. Additionally, vascular smooth muscle cells (VSMCs) significantly contribute to VC by undergoing a phenotypic switch and differentiating into osteoblast-like cells. When factors like hypertension cause disturbed laminar flow in the body’s vasculature, the mechanical stress promotes the phenotypic switch and calcification of VSMCs via mechanotransduction. VC is also induced by the Wnt pathway, which is activated via mineral imbalance and mechanical stimulation. However, the exact mechanisms behind …

Effects Of High School Engineering Course Availability And Participation On Engineering School Recruitment, Discipline Selection, Persistence Attitudes, And Self-Efficacy, Kristin S. Sandberg

Theses and Dissertations

The need for engineers in the workforce continues to grow. Filling this need requires recruiting future engineers to colleges and universities and retaining them through to degree completion. However, this is easier said than done. Universities are tasked with attempting to keep up with the demand for new engineers and companies are searching for new engineers to recruit. One avenue that has been established in the attempt to reach students for engineering is offering engineering or STEM classes in K-12 schools.

This dissertation looked at engineering classes offered at the high school level. These courses were analyzed for relationships with …

Elucidating Self-Assembly Of Semiconducting Polymers In The Presence Of A Low Molecular Weight Gelator, Madhubhashini Lakdusinghe

Theses and Dissertations

Semiconducting polymers with a conjugated backbone are important for energy storage, conversion, and biomedical field applications. The self-assembly process of these polymers in solutions depends on the polymer concentration and quality of the solvent. The electrical properties of thin films obtained from the solution phase depend on the self-assembled process. Thin films of conjugated polymer gels with percolating networks of self-assembled structures display improved electrical conductivities. In this dissertation, we studied the impact of the secondary gel matrix formed by a low molecular weight gelator, on the self-assembly of conjugated polymers, the preservation of assembled structures in dried gel films …

Effect Of Environmental And Geometrical Factors On Microstructure, Desiccation Cracking, And Carbon Dioxide Flux In Clays, Charles Clayton Goodman

Theses and Dissertations

Studying the effects of extreme conditions, such as high temperatures and low humidity, on soil properties is important to various disciplines, including geotechnical engineering, soil science, waste management, crop management, and ceramics. The goal of this research is to investigate the effect of environmental and geometrical factors on microstructure, desiccation cracking, and CO₂ flux in clays. The objectives of this research are threefold. (1) Understand the effects of temperature on the microstructure of clay soils; (2) develop a standardized procedure for studying desiccation cracking in a laboratory setting with reliable and repeatable results; and (3) develop an environmental chamber …

Gas Permeability Of 3d Stitched Composites For Cryogenic Applications, Shuvam Saha

Theses and Dissertations

This research aims to investigate the influence of 3D through-thickness stitching on the gas permeability and transverse microcracking of cryogenically cycled carbon/epoxy composites. 3D through-thickness stitching can be used to improve the interlaminar properties of polymer matrix composites (PMCs) and produce lightweight, unitized structures for cryogenic storage tanks. To fully utilize stitched composite structures for these applications, their inherent gas permeability challenges must be understood. Therefore, in this study, the stitched composites' damage evolution and gas permeability was experimentally characterized under a) pure thermal stress, b) thermal and uniaxial mechanical stress, and c) thermal and biaxial mechanical stress. Helium gas …

Multi-Objective Design Optimization Of Two Configurations Of Ventricular Shunts For Hydrocephalus, Will Kirkpatrick

Theses and Dissertations

Hydrocephalus is developed when the flow of cerebrospinal fluid is obstructed in the ventricles and a pressure build-up is generated within the brain. Ventricular shunts are used to remove excess fluid from the brain, but these shunts have a common problem of failure due to the shunt being obstructed by the build-up of astrocytes. To address this, two sets of 27 designs of ventricular shunts were identified and analyzed with parameters that could potentially reduce obstruction risks. The performance of these designs was examined using fluid simulations on these two sets of 27 designs. One set explored close-tipped shunt designs, …

Comparing Current Consistency And Electrical Resistance Of Wearable Photovoltaic Cells Pre- And Post-Laundering And Pre- And Post-Corrosion Resistance Testing Conditions., Amit Talukder

Theses and Dissertations

Photovoltaic(PV) technology is promising due to its natural availability among energy harvesting technologies. There is a growing need for sustainable power sources that can function without being connected to a power source or needing regular battery replacements. Wearable PV cells are gaining popularity in different applications. However, most companies produce wearable PVs for terrestrial applications. Research on wearable PV applications for the marine environment remains limited because these cells suffer from several issues. This research compares commercially sourced wearable PV cells' maximum current consistency and electrical resistance for two testing conditions. The researcher followed standardized methods for these two laundering …

Physical Layer Security With Unmanned Aerial Vehicles For Advanced Wireless Networks, Aly Sabri Abdalla

Theses and Dissertations

Unmanned aerial vehicles (UAVs) are emerging as enablers for supporting many applications and services, such as precision agriculture, search and rescue, temporary network deployment, coverage extension, and security. UAVs are being considered for integration into emerging wireless networks as aerial users, aerial relays (ARs), or aerial base stations (ABSs). This dissertation proposes employing UAVs to contribute to physical layer techniques that enhance the security performance of advanced wireless networks and services in terms of availability, resilience, and confidentiality. The focus is on securing terrestrial cellular communications against eavesdropping with a cellular-connected UAV that is dispatched as an AR or ABS. …

Resource Optimization Of Edge Servers Dealing With Priority-Based Workloads By Utilizing Service Level Objective-Aware Virtual Rebalancing, Amna Shahid

Theses and Dissertations

IoT enables profitable communication between sensor/actuator devices and the cloud. Slow network causing Edge data to lack Cloud analytics hinders real-time analytics adoption. VRebalance solves priority-based workload performance for stream processing at the Edge. BO is used in VRebalance to prioritize workloads and find optimal resource configurations for efficient resource management. Apache Storm platform was used with RIoTBench IoT benchmark tool for real-time stream processing. Tools were used to evaluate VRebalance. Study shows VRebalance is more effective than traditional methods, meeting SLO targets despite system changes. VRebalance decreased SLO violation rates by almost 30% for static priority-based workloads and 52.2% …

Using Dynamic Task Allocation To Evaluate Driving Performance, Situation Awareness, And Cognitive Load At Different Levels Of Partial Autonomy, Viraj R. Patel

Theses and Dissertations

The state of the art of autonomous vehicles requires operators to remain vigilant while performing secondary tasks. The goal of this research was to investigate how dynamically allocated secondary tasks affected driving performance, cognitive load, and situation awareness. Secondary tasks were presented at rates based on the autonomy level present and whether the autonomous system was engaged. A rapid secondary task rate was also presented for two short periods regardless of whether autonomy was engaged. There was a three-minute familiarization phase followed by a data collection phase where participants responded to secondary tasks while preventing the vehicle from colliding into …

Assessing And Predicting The Students’ Systems Thinking Preference: Multi-Criteria Decision Making And Machine Learning, Siham Tazzit

Theses and Dissertations

The 21st century is marked by a technological revolution that features digital implementation and high interconnectivity between systems across different domains, such as transportation, agriculture, education, and health. Although these technological changes resulted in modern systems capable of easing individuals’ lives, these systems are increasingly complex, and that increased complexity is only expected to continue. The increased system complexity is due to the rapid exchange of information between subsystems, which creates high interconnectivity and interdependence between the subsystems and their elements. Workforce skill sets, as a result, must be modified appropriately to ensure the systems’ success. Systems Thinking is an …

Ruggedness Test Of A New Standardized Test Method For Abrasion Resistance Of E-Textiles, Erin Parker

Theses and Dissertations

Standard test methods provide product developers with information regarding materials' suitability for different purposes. Typically, current standards are suitable for determining the mechanical properties of new materials. However, in the case of electronic textiles (E-Textiles) and wearable technology (wearables), adding conductive components with added functionality makes utilizing textile standards difficult, and these standards will not provide information on mechanical and electrical properties of conductive elements. New standards for E-Textile and wearables testing are needed to ensure product developers can obtain the information necessary to make informed decisions about new products. Standards organizations such as the American Society for Testing and …

Direct Measurement Of The 114cd(N, Gamma)115cd Cross Section In The 1 Ev To 300 Kev Energy Range, Kofi Tutu Addo Assumin-Gyimah

Theses and Dissertations

The large thermal cross section of cadmium makes it ideal for many practical applications where screening of thermal neutrons is desired. For example, in non-destructive assay techniques, or for astrophysical studies of the s-process. All such applications require precise knowledge of the neutron-capture cross section on cadmium. Although there are some data on neutron-capture cross sections particularly at thermal energies and at energies relevant for astrophysics, there is very little data at most other energies. Further, the evaluated cross sections from the ENDF and JENDL databases disagree at high energies. Therefore, there is a critical need for precise knowledge of …

A Comparison Of Ground Reaction Forces And Muscle Activity Of The Tsunami Bar® Against A Rigid Barbell During Back Squat Phases, John Carver Middleton

Theses and Dissertations

An Institutional Review Board (IRB)-approved study was conducted to investigate the effects of the Tsunami Bar® (TB), a flexible barbell, on ground reaction force (GRF) production and muscle activity in the quadricep, hamstring, and gluteal muscle groups during phases of the squat exercise and compare the effects to the effects to using a rigid barbell (RB). A two-by-two repeated measures Analysis of Variance (ANOVA) test was used to compare the results. Descriptive statistics showed significantly higher GRFs for the TB during the unweighting phase, significant differences in GRFs between speeds for each phase, significantly higher forces on average with the …