Engineering Commons^™

Development Of Unsaturated Polyester Resin Mortar Utilizing Industrial Wastes, Fatema Ahmed Alahmed

Theses

In recent years, polymer mortar (PM) has played a crucial role in the modern construction industry. It is gaining recognition as an effective and quick repair material in construction applications because it has several benefits over traditional Portland cement concrete. Various types of polymer binders, such as unsaturated polyester resin (UPR), have been used in these materials owing to their low cost, excellent strength, high workability, and rapid curing. This study investigates the feasibility of reutilizing locally available waste in the production of UPR-based polymer mortar, which facilitates the development of mortars with less environmental impact. In this study, the …

Experimental Study Of Central And Side Jet With And Without Chevron Nozzle Exit On Gas Turbine Leading Edge Jet Impingement Cooling, Ahmad Yousef Alqasrawi

Theses

This thesis presents a comprehensive investigation into the application of jet impingement cooling on turbines blade leading edge. Gas turbines are extensively utilized in power generation and aerospace industries, where efficient cooling techniques are crucial to enhance the performance and lifespan of turbine blades. The leading edge of a turbine blade is particularly vulnerable to high-temperature exposure and thermal stresses, making it an essential area for effective cooling strategies. Jet impingement cooling is one of the most effective cooling techniques mostly used in the leading edge of rotating and stationary blades. This study aims to explore the performance of jet …

Development Of Guidance, Navigation, And Control Systems For Multi-Spacecraft Assembly In Proximity Operations, Mohammed Ayman Atallah

Theses

This thesis presents the development of Guidance, Navigation, and Control (GNC) algorithms for multi-spacecraft assembly in proximity operations. A 3-DOF mathematical model of spacecraft relative translational motion is derived using the Euler-Lagrange method. Additionally, a 6-DOF mathematical model of spacecraft relative translational and rotational motion is derived using the twistor method, with consideration for the kinematic coupling effect. A new Linear Time-Invariant (LTI) model is developed based on the twistor model, which is utilized in the design of the GNC systems. Both LTI Model Predictive Control (MPC) and Linear Time-Varying (LTV) MPC algorithms are employed to develop Guidance and Control …

Selection Of Natural Surfactants For Possible Use In Improving Oil Recovery Of Carbonate Oil Reservoirs, Hiba Hachem Limam

Theses

Middle East petroleum industry is currently searching for the most suitable enhanced oil technique to improve the oil recovery from local oil reservoirs. The biggest challenge for the application of enhanced oil recovery (EOR) in the Middle East is the harsh environment (high salinity and temperature). Surfactant (synthetic or natural) is one of the EOR major players considered for application in the Middle East. However, synthetic surfactants have several drawbacks, such as economically unattractive and environmental impacts. This study investigated the possible use of natural surfactant extracted from the leaves of three types of plants, namely Aloe Vera, Tetraena qatarensis, …

Biological Seawater Desalination Using Green Algae And Cyanobacteria, Abdul Mannan Zafar

Dissertations

Water shortage in many coastal parts of the world is reaching alarming situation, including the United Arab Emirates. Urbanization and rapid population growth are generating critical water demands with an increase in per capita consumption. Seawater is usually treated by membrane processes such as Reverse Osmosis (RO). However, this technology is energy intensive and generates excessive brine as a waste. The solution to this problem can be found in natural remediation techniques that can reduce salt concentration from seawater, such as halophytes. A salt-tolerant species can consume Na⁺ and Cl^- ions and increase cellular growth which is termed …

Characterization And Structural Shear Behavior Of Recycled Aggregate Concrete Beams Reinforced With Basalt Fibers And Basalt Bars, Shahrukh Shoaib Ul Haq

Dissertations

Recycling construction waste material offers a sustainable solution to the problem of disposing of concrete construction and demolition waste. The use of basalt fibers (BF) and basalt fiber-reinforced polymer (BFRP) reinforcing bars in concrete structures made of recycled concrete aggregate (RCA) would prolong their service life and reduce the maintenance cost. This research aims to investigate the potential use of BF, RCA, and BFRP reinforcing bars to produce sustainable and steel-free structural concrete. The study consisted of material characterization testing, numerical simulation, and large-scale beam testing.
/="/">Material characterization tests were performed on normal-strength concrete (NSC) and high-strength concrete (HSC). …

Control Methods For Maximizing Power Absorption And Grid Integration In Point Absorber Wave Energy Converters, Abdin Yousif Elamin

Dissertations

Wave energy is an emerging renewable energy source with great potential attributable to its consistent availability and high energy density. Technologies responsible for harnessing this form of energy are referred to as wave energy converters (WECs), among which point absorbers (PAs) are a notable subcategory. Unfortunately, the unpredictable and variable nature of waves, coupled with their complex hydrodynamics, has hindered PAs from achieving maximum wave energy absorption. Moreover, the inherent variability in wave energy leads to fluctuations in the power output of PAs. These power fluctuations pose challenges for grid integration, which requires power quality compatible with grid code standards. …

Predictive Modelling Of Road Deterioration Using An Artificially Intelligent Bayesian Belief Networks Approach, Babitha Elizabeth Philip

Dissertations

The ability to predict road deterioration is the cornerstone for developing a reliable Pavement Management System (PMS) that optimizes pavement maintenance programs. Such prediction capacity becomes increasingly important, especially when highway agency funds are confined. This research focuses on the development of prediction models based on an artificial intelligence technique, Bayesian Belief Networks (BBN), that aid decision-makers in forecasting expected road distress curves on the lights of various (e.g., environmental, traffic, and road-specific) factors and maintenance decisions. The novelty of this research revolves around deploying BBNs which allow analysts to yield Markovian predictions of annual road deterioration based on incomplete …

Aerodynamic & Aeroacoustic Performance Of Wind Turbine Blades Featuring Enhanced Flow-Control, Md Zishan Akhter

Dissertations

Wind energy, being one of the cleanest and most sustainable sources, has undergone remarkable growth in recent years due to advancements in aerodynamics and increased power output. The research community is actively pursuing the development of cutting-edge solutions to further optimize wind turbine technology, ensuring its maximum efficiency and revolutionizing the landscape of wind power.
/="/">This research aims to design and develop flow-control devices for wind turbine blades, employing both active and passive control mechanisms, namely morphing trailing-edge and slot-profile, respectively. The objective is to enhance wind turbine performance across a wide range of wind speeds. The morphing trailing-edge …

Development Of A Vortex-Cooled Bipropellant Thruster And Evaluation Of Performance Characteristics With Respect To Injection Parameters, Mousa Adnan Aqailan

Theses

This study presents an experimental assessment of the cooling performance and efficiency of a 10N-vortex-cooled Propane/Gox bi-propellant thruster that was fabricated using metal and thermoplastic material. The proposal of injecting an oxidizer in a vortex pattern was suggested as a potential cooling method for semi-thermoplastic constructed thrust engines. This method has been demonstrated as a promising candidate for integrated cooling and can be manufactured using 3D printing technology. In contrast to typical complicated cooling systems and their attributed common downsides; the vortex injection can be 3D printed as a single solid piece thruster, thereby reducing design complexity, weight, and manufacturing …

Demo Abstract: Vgglass - Demonstrating Visual Grounding And Localization Synergy With A Lidar-Enabled Smart-Glass, Darshana Rathnayake, Dulanga Weerakoon, Meeralakshmi Radhakrishnan, Vigneshwaran Subbaraju, Inseok Hwang, Archan Misra

Research Collection School Of Computing and Information Systems

This work demonstrates the VGGlass system, which simultaneously interprets human instructions for a target acquisition task and determines the precise 3D positions of both user and the target object. This is achieved by utilizing LiDARs mounted in the infrastructure and a smart glass device worn by the user. Key to our system is the union of LiDAR-based localization termed LiLOC and a multi-modal visual grounding approach termed RealG(2)In-Lite. To demonstrate the system, we use Intel RealSense L515 cameras and a Microsoft HoloLens 2, as the user devices. VGGlass is able to: a) track the user in real-time in a global …

Joint Location And Cost Planning In Maximum Capture Facility Location Under Random Utilities, Ngan H. Duong, Tien Thanh Dam, Thuy Anh Ta, Tien Mai

Research Collection School Of Computing and Information Systems

We study a joint facility location and cost planning problem in a competitive market under random utility maximization (RUM) models. The objective is to locate new facilities and make decisions on the costs (or budgets) to spend on the new facilities, aiming to maximize an expected captured customer demand, assuming that customers choose a facility among all available facilities according to a RUM model. We examine two RUM frameworks in the discrete choice literature, namely, the additive and multiplicative RUM. While the former has been widely used in facility location problems, we are the first to explore the latter in …

Robust Maximum Capture Facility Location Under Random Utility Maximization Models, Tien Thanh Dam, Thuy Anh Ta, Tien Mai

Research Collection School Of Computing and Information Systems

We study a robust version of the maximum capture facility location problem in a competitive market, assuming that each customer chooses among all available facilities according to a random utility maximization (RUM) model. We employ the generalized extreme value (GEV) family of models and assume that the parameters of the RUM model are not given exactly but lie in convex uncertainty sets. The problem is to locate new facilities to maximize the worst-case captured user demand. We show that, interestingly, our robust model preserves the monotonicity and submodularity from its deterministic counterpart, implying that a simple greedy heuristic can guarantee …

Development Of Popcorn Thermal Insulation Panels, Yonis Hussein Mohamud

Theses

The research and development of sustainable and renewable materials that can take the place of conventional plastics derived from petroleum has attracted increasing attention in recent years. Polylactic acid (PLA) and Polyhydroxy butyrate (PHB) are viable alternatives biopolymers due to their biodegradability. Also, the enhancement of material properties can be achieved through the incorporation of fillers. In this study, the utilization of popcorn in developing of insulation materials has been employed in two distinct methodologies. The first involves the coating of popcorn with varying percentages of PLA using the solvent casting method, while the second involves the integration of popcorn …

Heat Transfer Performance Of Single-Phase Circular Heat Sink With Micro Pin-Fin, Mouza Abdulla Al Shamsi

Theses

This thesis presents a numerical study of laminar forced convection in a novel design of a microscale single phase water cooled circular heat sink with pin fins developed and analyzed to serve as a miniaturized cooling system. The developed heat sink in this study aims to achieve efficient heat dissipation from high electronics integration that generates high heat flux and non-uniform temperature distribution, which leads to the reduction of life and reliability of electronic devices.

Numerical analysis of ten different configurations of the circular heat sink has been carried out for the heat flux of 100 W/cm2 at range of …

Design And Application Of Circular Edge-Fed Linearly Polarized Patch Antenna With Enhanced Bandwidth And Gain For Respiratory Monitoring Systems, Mo’Ath Akram Al Hayek

Thesis/ Dissertation Defenses

This Master's thesis explores the design and application of a circular edge-fed patch antenna for respiratory monitoring systems. The antenna, fabricated from a thin copper adhesive sheet, demonstrates compatibility with textile materials of low thickness and a relative permittivity of 1.3. Using CST Studio Suite 3D EM simulation software, the antenna's design was optimized through extensive trials, achieving improved bandwidth and gain. Our findings indicate that the antenna successfully differentiates between various breathing patterns, including slow, normal, and fast breathing rates. The study's managerial and research implications extend to healthcare, wearable technology sectors, and the broader scientific community. The research …

The Santa Clara, 2023-10-31, Santa Clara University

The Santa Clara

No abstract provided.

A Review On The Coalescence Of Confined Drops With A Focus On Scaling Laws For The Growth Of The Liquid Bridge, Sangjin Ryu, Haipeng Zhang, Udochukwu John Anuta

Department of Mechanical and Materials Engineering: Faculty Publications

The surface–tension-driven coalescence of drops has been extensively studied because of the omnipresence of the phenomenon and its significance in various natural and engineering systems. When two drops come into contact, a liquid bridge is formed between them and then grows in its lateral dimensions. As a result, the two drops merge to become a bigger drop. The growth dynamics of the bridge are governed by a balance between the driving force and the viscous and inertial resistances of involved liquids, and it is usually represented by power–law scaling relations on the temporal evolution of the bridge dimension. Such scaling …

Dependence Of The Granulometric Composition Of Chalk During Granulation In A Turbulized Layer, N.A. Annaev, S.Kh. Nurmukhamedov, Zh.V. Sultonov, N.Sh. Khudoiberdieva

Chemical Technology, Control and Management

The article presents the results of an experimental study on chalk granulation in the turbulized layer of a turboblade granulator. The design of the apparatus combines the following sequential processes: grinding, granulating and compacting newly formed granules. In addition, this device has the ability to carry out both rotational and reciprocating motion. It has been established that preliminary grinding of the feedstock increases the efficiency of the granulation process and improves the quality of the finished product. In the experiments, four substances were used to create 2 astringent suspensions and the optimal combination and their ratios were determined. The experiments …

Study Of Technological Multi-Stage Modes Of Refining Vegetable Oils, Elyor Erkinovich Samadov

Chemical Technology, Control and Management

The work reflects the current state of the technology for obtaining refined vegetable oils and identifies trends in their improvement and further development in the environment of industrial automation using modern methods of distributed monitoring, building control, and management systems for technological processes of refining vegetable oils. The influence of technological modes of refining vegetable oils on the efficiency of diffusion extraction of free fatty acids (FFA) has been studied and the indirect pH-metric measurement of FFA concentration has been substantiated.

The Algorithm For The Design Of Fine Granular Substances’ Smart-Type Heat And Moisture Converters Based On Their Accuracy And Speed Criteria, Erkin Uljaev, Ali Abduakhatovich Abduraxmanov

Chemical Technology, Control and Management

The paper describes a technique and algorithm allowing to perform parametric design of smart-type heat and moisture converters (hereinafter SHMC) of fine-grained dispersive materials based on their criteria of accuracy and speed. The proposed algorithm optimizes the process of design of smart-type switches and ensure optimal performance of the switches. The method of calculation and selection of optimal parameters of smart-type heat and moisture converters intended to be used in the measurement of parameters such as heat and humidity of fine dispersive substances are aimed at boosting two parameters, i.e., the accuracy and speed. Also, the design stages have been …

Synthesis Problem Of Adaptive Control Systems For Multi-Channel And Multi-Mode Objects, Jasur Usmonovich Sevinov, Abdishukurov Maqsud O'G'Li Shavkat Mr, Nasriddin Xasanovich Bobomurodov

Chemical Technology, Control and Management

The issue of synthesis of an adaptive control system for multi-channel and multi-mode objects is considered. Development that of effective adaptive control algorithms for nonlinear dynamic systems ensure quality indicators of processes. In technological processes, it is necessary to control several parameters or several systems at the same time. For such a process control system, an adaptive control system is created. Work has been carried out on structural projects for the installation of adaptive systems. The stable requirements for the correction of adaptive control systems are seen. A review of several parametric deviation detections, based on the reference model and …

Fast Fourier Transform Analytical Expression Of Estimation Of Nosinusoidality Indicators, Ilkhomjon Khakimovich Siddikov, Zailobiddin Urazali O’G’Li Boixanov

Chemical Technology, Control and Management

This in the article asynchronous motor is reactive power control to do and manage for from the transformer used. The main element of the current transformer is the measuring instrument, i.e. the sensitive element. Depending on the number of asynchronous motor stator blades, the measurement sensitive element is placed between the main winding and the rotor as a two-ring or three-ring. Measurement accuracy, reliability, and sensitivity increase compared to an independent measuring device. The measuring element loops are independent or connected in series . When the measurement loops are connected in series, the amount of output voltage is …

Determination Of Oxidative Stability Of Crude And Refined Vegetable Oils By Rancimat, Oybek Zufarov, Kamar Serkayev

Chemical Technology, Control and Management

The oxidative stability of vegetable oils has been introduced as a critical factor that affects on its quality, shelf life, and nutritional value. In this study, the Rancimat method was analyzed for investigation and comparing the oxidative stability of crude and refined vegetable oils. The induction period, representing the time taken for significant oxidative degradation to occur, has been used as a key parameter to evaluate the oxidative stability. The oxidative stability of different types of vegetable oils, including sunflower, rapeseed, soybean, and cottonseed oil, was studied at various stages of processing: water degummed and neutralized oil. The induction period …

Metric Algorithms Of Symbol Detection For Determining A Group Of Significant Objects, Sherzod Ismoiljonovich Yuldashev

Chemical Technology, Control and Management

This article examines the algorithm of nearest neighbors, which widely uses metric classification algorithms and the combinatorial theory of reconnection with the precedent information in solving practical recognition problems. One of the most important issues in the development of image recognition systems is that the image recognition system determines the characteristics of objects. Most pattern recognition methods are used in the process of recognizing not all objects of the training sample, but a certain part of the objects. The formation of a training sample by filtering objects according to the level of importance for metric classification algorithms is carried out …

Deep Learning-Based Automatic Stereology For High- And Low-Magnification Images, Hunter Morera

USF Tampa Graduate Theses and Dissertations

Quantification of the true number of stained cells in specific brain regions is an important metric in many fields of biomedical research involving cell degeneration, cytotoxicology, cellular inflammation, and drug development for a wide range of neurological disorders and mental illnesses. Unbiased stereology is the current state-of-the-art method for collecting the cell count data from tissue sections. These studies require trained experts to manually focus through a z-stack of microscopy images and count (click) on a hundred or more cells per case, making this approach time consuming (~1 hour per case) and prone to human error (i.e., inter-rater variability). Thus, …

Distribution Of Magnetic Flux In Magnetic Chains Of Angular Displacement Measuring Transformer Converters With Variable Active Surface Of Movement Core, Sulton Faizullayevich Amirov, Ulugbek Shukhratovich Mamadaliyev, Absaid Khurramovich Sulliev

Chemical Technology, Control and Management

In the article, the magnetic chain of a differential type angular displacement transformer converter with a variable active area of a movable ferromagnetic ring is considered as a magnetic chain with distributed parameters in which the thickness of the movable ferromagnetic ring is a linear function of the angular displacement of the converter. It is shown that although in magnetic chains with a special distribution structure of the magnetic parameters of the resistance of ferromagnetic rings and the magnetic conductivity of the working gap between the rings, the same conditions are created for the passage of the lines of force …

Models Of Physical-Technical Effects In The Processes Of Changing Three-Phase Asymmetrical Currents Into A Signal In The Appearance Of Secondary Voltage, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article presents research models, physical processes and mathematical expressions of the processes, quantities and parameters in the elements and structures of three-phase electromagnetic current transformers used in measurement and control systems of asymmetrical three-phase reactive power of power supply systems.

Algorithm For The Functioning Of The Robot's Mechatronic System, Nodira Batirdjanovna Alimova, Bekmurod Bayotovich Yusupov

Chemical Technology, Control and Management

Currently, the introduction of mechatronics and robotics into modern technologies, including rural industry, which are based on different types of mechatronic modules, is relevant. The article discusses the functioning algorithm of the electro-pneumatic multi-position mechatronic system of an intelligent robot. The mechatronic system under consideration is an integrated complex of electro-pneumatic elements, electronic elements and computer technology, with constant dynamic changes in energy and information between them, united by a common automatic control system. The main distinctive feature of this mechatronic system is increased positioning accuracy and high traction forces.

Development Of An Imitation Model Of The Vulcanization Process In The Production Of Elastomeric Composites, Toshtemir Avezov, Mirxalil Agzamovich Ismailov

Chemical Technology, Control and Management

In the article, a systematic approach to the mathematical modeling of the production process of complex multi-stage elastomeric composites was considered, which allows to take into account the stoichiometric relationship of the chemical reaction in the process. Based on the chemical reaction occurring in the mixer, a kinetic model of the elastomer composites production process is proposed, which is the basis for obtaining the main functional relationship of the mathematical model for the mixer, the main quality indicator of the process. The proposed systematic approach in the form of a mathematical model based on the stoichiometric relationship and the …