Engineering Commons^™

Compressibility Behavior Of Conditioned Sandy Clay Considering The Physical Degradation Of Foam: Tunneling Issue, Mœz Selmi, Yahya Alassaf, Mariem Kacem, Mehrez Jamei

Journal of Sustainable Mining

Surfactants in the form of liquid foam are commonly used for ensuring the fluidity of conditioned soil during shield tunneling in mining zone. The compressibility can be significantly affected, depending on the percentage of fine soil. Thus, this paper investigates the compressibility of foam-conditioned fine soil. Oedometric tests as a function of the percentage of foam have been performed. Foam’s stability was analyzed, considering a laboratory soil made from 40% kaolinite and 60% of sand and mixed with a foaming agent based on an anionic surfactant. Experimental results showed that the foam stability was manifested through a reduction of the …

Novel Method Of The Quantification Of Turbulent Fluid Flow In Silicone Artery Phantoms Using Acoustic Analysis, Julia Wong

Master's Theses

Cardiovascular disease is the leading cause of death globally and is responsible for taking 17.9 million lives per year. Despite the use of clinical treatments and detection methods, there remains a large population of individuals that suffer from CVD whose symptoms are left undetected and untreated prior to a life-threatening cardiac event. This highlights a need for an early detection method that can prevent the manifestation and worsening of the disease as well as address limitations of current early detection methods. An area of interest for early detection of CVD is subclinical atherosclerosis, which is the long, early, asymptomatic stage …

Bronx Community College Center For Sustainable Energy Collection, 2004-2013, Allen Thomas, Cynthia Tobar

Finding Aids

Finding aid for the Bronx Community College Center for Sustainable Energy Collection prepared by Bronx Community College Archives.

Development Of An Angiogenic Tissue-On-A-Chip Microenvironment, Eric Stuehr

Master's Theses

Preclinical testing is necessary to investigate the safety and efficacy of novel therapeutics before moving to clinical trials, yet approximately 90% of these therapies fail once tested in humans. This has led to increased interest in developing robust preclinical models that accurately mimic the complex human in vivo physiology. Microfluidic devices that can introduce dynamic conditions to 3D cell/organoid cultures, also known as tissue-on-a-chip, have emerged as physiologically relevant in vitro preclinical models that can achieve high throughput screening of therapeutics. The research presented here aimed to develop an angiogenic environment within a novel microfluidic device to stimulate formation of …

Thermo-Mechanical Instabilities In Next-Generation Friction Materials In High-Speed Sliding Systems, Kingsford Koranteng

Electronic Theses and Dissertations

For centuries, the manufacturing industry has incorporated metals like copper into friction materials to enhance thermal properties and minimize thermo-mechanical instabilities (TMI) in high-speed sliding systems. Unfortunately, these metals have adverse environmental effects due to the emission of hazardous particulate matter. As a result, there is a growing movement towards adopting next-generation friction materials as an alternative solution.

The study begins by conducting experimental and numerical investigations to examine the instabilities found in metal-based friction materials. The primary objective is to utilize the insights gained from the investigations to computationally explore effective strategies for mitigating various instabilities that may arise …

Molecular Dynamics Study Of Characterization In Metal-Free Friction Materials, Yizhan Zhang

Electronic Theses and Dissertations

Metallic friction materials currently used in industry may adversely impact the environment. Substitutions for metals in friction materials, on the other hand, can introduce operational safety issues and other unforeseeable issues such as thermal-mechanical instabilities and insufficient strength. In view of it, this dissertation focuses on developing different kinds of materials from simple structure to complex structure and evaluating the material properties with the assistance of molecular dynamics (MD) tools at the nano scale.

First, the concept of the contacted surfaces in friction at the atomic scale was introduced in order to get accurate understanding of the friction process compared …

Quantitative, Photocurrent Multidimensional Coherent Spectroscopy, Adam Halaoui

Electronic Theses and Dissertations

Multidimensional coherent spectroscopy (MDCS) is a quickly growing field that has a lot of advantages over more conventional forms of spectroscopy. These advantages all come from the fact that MDCS allows us to get time resolved correlated emission and absorption spectra using very precisely chosen interactions between the density matrix and the excitation laser. MDCS spectra gives the researcher a lot of information that can be extracted purely through qualitative analysis. This is possible because state couplings are entirely separated on the spectra, and once we know how to read the data, we can see how carriers transport in the …

Frequency Stability Constrained Grid Operation With High Penetration Of Renewables, Ningchao Gao

Electronic Theses and Dissertations

Achieving carbon neutrality necessitates a significant integration of renewable energy into power systems. However, the swift implementation of fluctuating renewable energy (VRE) sources such as solar photovoltaics (PV) exacerbates real time power imbalances due to the randomness and uncertainty associated with VRE power generation. Further, the declining reliance on conventional synchronous generators (SGs) for system inertia presents considerable challenges in maintaining frequency stability, especially following disturbances.

Two possible solutions are proposed to address the first issue. Firstly, a speedy real time generation dispatch can be scheduled to allocate generation resources within short time intervals to effectively respond to changes in …

Changes In Balance With Brain Inflammation: Sensitivity In Dual Motor Mechanisms, Hannah Mcdade

Electronic Theses and Dissertations

Concussion assessment in athletes has gained prominence due to potential long-term consequences of traumatic brain injuries. Evaluating balance alterations is crucial for understanding post-injury motor control strategies. This study introduces a novel approach to understanding center of pressure (COP) dynamics during quiet stance tasks for assessing balance impairments in athletes recovering from concussion. Concussed athletes often experience impaired motor function and cognitive deficits, increasing the risk of orthopedic injury. Traditional balance assessments focus on total COP (COPt), overlooking nuanced hip and ankle mechanisms. This research investigates COP variations between constant loading (COPc) and variable loading (COPv) signals in concussed athletes …

Adoption Of Pedagogical Innovations: Social Networks Of Engineering Education Guilds, Darby Riley, Kaitlin Mallouk, Courtney Faber, Alexandra Coso Strong

Henry M. Rowan College of Engineering Departmental Research

This work investigates how innovations propagate through two professional networks (guilds): the Kern Entrepreneurial Engineering Network (KEEN) and the Consortium to Promote Reflection in Engineering Education (CPREE). Previous research has demonstrated that the adoption of pedagogical innovations is supported by the socialization of the innovation among potential adopters. In this work, we use social network analysis to explore the impact of professional connections on innovation adoption. Our research questions are: (1) How does overall social structure differ between guilds? (2) How do measures of social network structures relate to innovation adoption? A survey was distributed to members of KEEN and …

Landscape Position And Cover Crops Affects Crop Yields In A Terrace-Tiled Field, Harpreet Kaur, Kelly A. Nelson, Gurbir Singh, Gurpreet Kaur, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Cover Crops (CC) Provide Soil Ecosystem Benefits Including Reduced Soil Erosion, Improved Soil Health, and Nutrient Cycling. However, the Effect of CCs on Rotational Commodity Crop Grain Yields and Nutrient Uptake May Vary at Different Landscape Positions and under Different Soil Moisture Dynamics. the Objectives of This Study Were to Determine the Influence of CCs in a Terraced Field on Soil Moisture at Crop Emergence and Reproductive Stages of Corn (Zea Mays L) and Soybean (Glycine Max L. Merr.) Development, and Evaluate CCmix (Wheat (Triticum Aestivum L.), Radish (Raphanus Raphanistrum Subsp. Sativus), and Turnip (Brassica Rapa Subsp. Rapa)) and Cereal …

Effect Of Ultraviolet Light On Field Emission Performance And Lifetime Of Lateral Field Emitter Devices, Ranajoy Bhattacharya, Marco Turchetti, Matthew Yeung, P. Donald Keathley, Karl K. Berggren, Jim Browning

Electrical and Computer Engineering Faculty Publications and Presentations

Lateral field emission devices have been characterized before and after ultraviolet (UV) light exposure. Two types of planar device structures, diode and bowtie, were studied. These nanoscale devices have 9–15 nm tip-to-tip (bowtie) or tip-to-collector (diode) dimensions with the tips fabricated from Au/Ti. Typical currents of 2–5 nA per tip at 6 V were measured. It was observed that after UV exposure, the collected current was reduced by > 28% for the case of a bowtie device; whereas the current was reduced by > 39% for the case of a diode device. This reduction can be attributed to water vapor desorption on …

Custom Led Dashboard Integration For The Cal Poly Racing Team, Josue Hernandez

Computer Engineering

The Custom LED Dashboard Integration was made for the Cal Poly Racing Team, specifically the BAJA division. The dashboard was made as a way to combat the current limitations endured from the past methods used to display critical information of the vehicle to the car. The display was made to combat issues of limited quantity of data being able to be displayed to the driver and its small readability was an issue, the display helped combat that by providing a greater quantity of data being able to be sent and displayed on the display and the information being displayed having …

Cost Modelling For Dimension Stone Quarry Operations, M. A. Raza, S. Raza, M. U. Khan, M. Z. Emad, K. Jalil, S. A. Saki

Mining Engineering Faculty Research & Creative Works

Dimension stone mining is Increasing because of growing demand from the building and construction industries. Diamond wire saw cutting is a popular dimension stone mining technique around the world. Estimation of the production cost for this method is critical for these operations. In this research a production cost model was developed for the mining of granite using a diamond wire saw. Cost and production data were collected from a granitic dolerite operation in Pakistan for a 4.5-year period and analyzed to identify the cost components. Fuel (34%), labor (15%), consumables (40%), and maintenance (5%) were found to be the four …

2023 - The Fourth Annual Fall Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Fall 2023 Symposium of Student Scholars, held in November 2023. Includes abstracts from the presentations and posters.

Evolutionary History Of Western Eos Chaos Of Valles Marineris, Mars: Insights From Morphological Characteristics, Asif Iqbal Kakkassery, V. J. Rajesh, Rishitosh K. Sinha, Devika Padmakumar, K. S. Sajinkumar

Michigan Tech Publications, Part 1

The dynamics of aqueous processes within the Eos Chasma region in the trough of Valles Marineris on Mars have been attributed to a variety of Hesperian-aged landforms. We aim to improve the understanding of the geological characteristics of the western part of the Eos Chaos by investigating the morphological, topographical, and thermo-physical characteristics of the western semi-circular segment of Valles Marineris. The western Eos Chaos is characterized by remnants of an elevated crater rim, a central peak, and a circular boundary. Based on these observations, we infer that the study area is an ancient, highly degraded impact crater. Our observations …

Development Of Eco-Friendly Chitosan-G-Polyacrylamide Preformed Particle Gel For Conformance Control In High-Temperature And High-Salinity Reservoirs, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Oil and gas extraction has become challenging nowadays due to the accompanying amount of excess produced water that results in poor recoverability of hydrocarbon, besides other environmental and economic isues. A recent and efficient technology for conformance control is the injection of preformed particle gels (PPGs), which results in a more practical production process. Nevertheless, existing treatments fail in high-temperature reservoirs, are extremely sensitive to salinity, and are hazardous. The characteristics of the designed PPG, such as mechanical strength and thermal durability, is mainly depend on their crosslinking method. Polysaccharides-based gels prepared by physical crosslinking are weaker than the ones …

Chain Conformation And Exciton Delocalization In A Push-Pull Conjugated Polymer, Yulong Zheng, Rahul Venkatesh, Connor P. Callaway, Campbell Viersen, Kehinde H. Fagbohungbe, Aaron L. Liu, Chad Risko, Elsa Reichmanis, Carlos Silva-AcuñA

UK CARES Faculty Publications

Linear and nonlinear optical line shapes reveal details of excitonic structure in polymer semiconductors. We implement absorption, photoluminescence, and transient absorption spectroscopies in DPP-DTT, an electron push−pull copolymer, to explore the relationship between their spectral line shapes and chain conformation, deduced from resonance Raman spectroscopy and from ab initio calculations. The viscosity of precursor polymer solutions before film casting displays a transition that suggests gel formation above a critical concentration. Upon crossing this viscosity deflection concentration, the line shape analysis of the absorption spectra within a photophysical aggregate model reveals a gradual increase in interchain excitonic coupling. We also observe …

Evaluation Of Residual Flexural Behavior Of Corroded Fiber-Reinforced Super Workable Concrete Beams, Jingjie Wei, Nima Farzadnia, Alfred Addai-Nimoh, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Effect of Macro Synthetic Fiber (MSF) Volume and Crack Widths on Corrosion of the Reinforcing Bars and Residual Flexural Behavior of Fiber-Reinforced Super-Workable Concrete (FR-SWC) Beams Exposed to Accelerated Corrosion. FR-SWC Beams Prepared with 0, 0.33%, and 0.66% MSF Were Pre-Cracked at 0.2-, 0.4-, and 0.75-Mm Widths Before Corrosion Testing. the Controlled Crack Width Was Initiated in One Set of Beams that Were Then Unloaded. the Crack Width Was Maintained for Another Set of Beams during Corrosion Testing by Inserting a Shim. Test Results Showed that the Use of 0.33% and 0.66% MSF Reduced Crack Development …

Pedicle Screw Placement Accuracy In Robot-Assisted Spinal Fusion In A Multicenter Study, Victoria L. Volk, Keegan A. Steele, Mia Cinello‑Smith, Richard V. Chua, John Pollina, Gregory Poulter, Eiman Shafa, Peter Busselberg, Clare K. Fitzpatrick

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Pedicle screw fixation is a spinal fusion technique that involves the implantation of screws into vertebral pedicles to restrict movement between those vertebrae. The objective of this research is to measure pedicle screw placement accuracy using a novel automated measurement system that directly compares the implanted screw location to the planned target in all three anatomical views. Preoperative CT scans were used to plan the screw trajectories in 122 patients across four surgical centers. Postoperative scans were fused to the preoperative plan to quantify placement accuracy using an automated measurement algorithm. The mean medial–lateral and superior–inferior deviations in the pedicle …

Cement-Based Materials With Solid-Gel Phase Change Materials For Improving Energy Efficiency Of Building Envelope, Zhuo Liu, Jiang Du, Ryan Steere, Joshua P. Schlegel, Kamal Khayat, Weina Meng

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This paper evaluated the cement-based materials incorporated with novel solid-gel phase change materials (PCMs) for improving the energy efficiency of building envelopes. This novel PCM is form-stable, which will not leak as solid-liquid PCMs do and not need encapsulation, and it features high energy-storage capacity. Experimental results showed that the thermal properties of cement-based materials were improved as the increase of PCM content. A 30% replacement of sand by volume with PCM can increase the latent heat of the mixture from around 0 to 7 J/g and decrease the thermal conductivity of PCM mortar based on the generalized self-consistent (GSC) …

Permeable Concrete Barriers To Control Water Pollution: A Review, Rehab O. Abdel Rahman, Ahmed M. El-Kamash, Yung-Tse Hung

Civil and Environmental Engineering Faculty Publications

Permeable concrete is a class of materials that has long been tested and implemented to control water pollution. Its application in low-impact development practices has proved its efficiency in mitigating some of the impacts of urbanization on the environment, including urban heat islands, attenuation of flashfloods, and reduction of transportation-related noise. Additionally, several research efforts have been directed at the dissemination of these materials for controlling pollution via their use as permeable reactive barriers, as well as their use in the treatment of waste water and water purification. This work is focused on the potential use of these materials as …

Shallow‑Water Habitat In The Lower Columbia River Estuary: A Highly Altered System, Will Templeton, David A. Jay, Heida Diefenderfer, Stefan Talke

Civil and Environmental Engineering Faculty Publications and Presentations

Decreases in shallow-water habitat area (SWHA) in the Lower Columbia River and Estuary (LCRE) have adversely affected salmonid populations. We investigate the causes by hindcasting SWHA from 1928 to 2004, system-wide, based on daily higher high water (HHW) and system hypsometry. Physics-based regression models are used to represent HHW along the system as a function of river inflow, tides, and coastal processes, and hypsometry is used to estimate the associated SWHA. Scenario modeling is employed to attribute SWHA losses to levees, flow regulation, diversion, navigational development, and climate-induced hydrologic change, for subsidence scenarios of up to 2 m, and for …

Designing For A Local Brand Image Of Architecture To Achieve Cultural Sustainability: Al Ain City As A Case Study, Dana Bassam Bidoun

Theses

Cities, like Al Ain, are dynamic entities, echoing the diverse rhythms and values of their inhabitants. Urban evolution showcases a city's brand-its unique identity sculpted by historical, cultural, and local influences. A city's true essence emerges when architects collaborate with residents, blending their desires with the city's architectural legacy. This study aimed to evaluate the effectiveness of a brand-based design strategy, integrating the architecture process with insights from local residents to foster a sense of identity and belonging in the built environment. Grounded in the personal construct theory, the research applied the repertory grid technique, combining both qualitative and quantitative …

Development Of A Vortex-Cooled Bipropellant Thruster And Evaluation Of Performance Characteristics With Respect To Injection Parameters, Mousa Adnan Aqailan

Theses

This study presents an experimental assessment of the cooling performance and efficiency of a 10N-vortex-cooled Propane/Gox bi-propellant thruster that was fabricated using metal and thermoplastic material. The proposal of injecting an oxidizer in a vortex pattern was suggested as a potential cooling method for semi-thermoplastic constructed thrust engines. This method has been demonstrated as a promising candidate for integrated cooling and can be manufactured using 3D printing technology. In contrast to typical complicated cooling systems and their attributed common downsides; the vortex injection can be 3D printed as a single solid piece thruster, thereby reducing design complexity, weight, and manufacturing …

Electromagnetic Mems Safety And Arming Devices, Fatima Rashed Alnuaimi

Theses

This thesis aims to investigate the design of safety and arming devices within artillery fuzes, which rely on the spin velocity and setback acceleration of the weapon. These systems consist of two critical components: the spin lock and the inertia lock. The spin velocity and setback acceleration of the weapon induce deformations in these components, serving as key criteria for determining whether the weapon is in an armed or safe state.

The primary objective of this thesis is to comprehensively analyze and assess the design of both the spin lock and inertia lock. The research will delve into multiple factors …

Development Of Popcorn Thermal Insulation Panels, Yonis Hussein Mohamud

Theses

The research and development of sustainable and renewable materials that can take the place of conventional plastics derived from petroleum has attracted increasing attention in recent years. Polylactic acid (PLA) and Polyhydroxy butyrate (PHB) are viable alternatives biopolymers due to their biodegradability. Also, the enhancement of material properties can be achieved through the incorporation of fillers. In this study, the utilization of popcorn in developing of insulation materials has been employed in two distinct methodologies. The first involves the coating of popcorn with varying percentages of PLA using the solvent casting method, while the second involves the integration of popcorn …

Design And Fem Modelling Of Mems Capacitive Accelerometer And Gyroscope For Quadcopter/Uav Applications, Shaikha Rashid Alnaqbi

Theses

This study presents the design, simulation, and analysis of Micro Electromechanical Systems (MEMS) sensors, constituting the principal components of MEMS-based Inertial Measurement Units (IMUs). The main objective of the study is to design, simulate and analyze 3-axis capacitive accelerometer and 3-axis gyroscope. The MEMS-based capacitive accelerometers and gyroscope are analyzed using Ansys Workbench. Modal, Static Structural and harmonic analysis are used to obtain resonant frequencies, deformation/stress and profile of amplitude over a wide range of frequencies. Mechanical sensitivity analysis of the designed accelerometer and gyroscope is performed using the Finite Element Method (FEM). Analytical Equations are developed to calculate mechanical …

Experimental Study Of Central And Side Jet With And Without Chevron Nozzle Exit On Gas Turbine Leading Edge Jet Impingement Cooling, Ahmad Yousef Alqasrawi

Theses

This thesis presents a comprehensive investigation into the application of jet impingement cooling on turbines blade leading edge. Gas turbines are extensively utilized in power generation and aerospace industries, where efficient cooling techniques are crucial to enhance the performance and lifespan of turbine blades. The leading edge of a turbine blade is particularly vulnerable to high-temperature exposure and thermal stresses, making it an essential area for effective cooling strategies. Jet impingement cooling is one of the most effective cooling techniques mostly used in the leading edge of rotating and stationary blades. This study aims to explore the performance of jet …

Development Of Guidance, Navigation, And Control Systems For Multi-Spacecraft Assembly In Proximity Operations, Mohammed Ayman Atallah

Theses

This thesis presents the development of Guidance, Navigation, and Control (GNC) algorithms for multi-spacecraft assembly in proximity operations. A 3-DOF mathematical model of spacecraft relative translational motion is derived using the Euler-Lagrange method. Additionally, a 6-DOF mathematical model of spacecraft relative translational and rotational motion is derived using the twistor method, with consideration for the kinematic coupling effect. A new Linear Time-Invariant (LTI) model is developed based on the twistor model, which is utilized in the design of the GNC systems. Both LTI Model Predictive Control (MPC) and Linear Time-Varying (LTV) MPC algorithms are employed to develop Guidance and Control …