Engineering Commons^™

Is It All About Efficiency? Exploring Students’ Conceptualizations Of Sustainability In An Introductory Energy Course, Laura A. Gelles, Joel Alejandro Mejia, Susan M. Lord, Gordon D. Hoople, Diana A. Chen

School of Engineering: Faculty Scholarship

Engineers are increasingly called on to develop sustainable solutions to complex problems. Within engineering, however, economic and environmental aspects of sustainability are often priori- tized over social ones. This paper describes how efficiency and sustainability were conceptualized and interrelated by students in a newly developed second-year undergraduate engineering course, An Integrated Approach to Energy. This course took a sociotechnical approach and emphasized modern energy concepts (e.g., renewable energy), current issues (e.g., climate change), and local and personal contexts (e.g., connecting to students’ lived experiences). Analyses of student work and semi-structured interview data were used to explore how students conceptualized sustainability …

Simulation Of A Trailing Edge Flap Using A Compliant Mechanism, Sam Blackwell

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Damage Assessment Of Glass Fiber Composites Using Dielectric Spectroscopy And Thermally Stimulated Depolarization Current, Bryan Durham, Gayathri Kola, Mohammadkian Mahroumi, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider, Minhazur Rahman, Monjur Morshed Rabby, Partha Pratim Das, Muthu Ram Prabhu Elenchezhian

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

A composite is generally defined as a material composed of two or more separate sub-materials that complement each other's characteristics when combined. Composites are widely used in several major industries due to their low density, high strength, and relatively predictable chemical and electrical properties. One of the significant challenges of integrating composites into more diverse fields is the ability to accurately and consistently test for damages. Due to the myriad number of microscopic structures available in composite materials, a single-use testing system is a large contributor to current research. One approach to the non-destructive testing of composites lies in exploiting …

Pause For A Cybersecurity Cause: Assessing The Influence Of A Waiting Period On User Habituation In Mitigation Of Phishing Attacks, Amy Antonucci

CCAC Theses and Dissertations

Social engineering costs organizations billions of dollars a year. Social engineering exploits the weakest link of information security systems, the people who are using them. Phishing is a form of social engineering in which the perpetrator depends on the victim’s instinctual thinking towards an email designed to create a fear or excitement response. It is well-documented in literature that users continue to click on phishing emails costing them and their employers significant monetary resources and data loss. Training does not appear to mitigate the effects of phishing much; other solutions are necessary to mitigate phishing.

Kahneman introduced the concepts of …

An Empirical Assessment Of Users' Information Security Protection Behavior Towards Social Engineering Breaches, Nisha Jatin Patel

CCAC Theses and Dissertations

User behavior is one of the most significant information security risks. Information Security is all about being aware of who and what to trust and behaving accordingly. Due to technology becoming an integral part of nearly everything in people's daily lives, the organization's need for protection from security threats has continuously increased. Social engineering is the act of tricking a user into revealing information or taking action. One of the riskiest aspects of social engineering is that it depends mainly upon user errors and is not necessarily a technology shortcoming. User behavior should be one of the first apprehensions when …

A Study Of Factors That Influence Symbol Selection On Augmentative And Alternative Communication Devices For Individuals With Autism Spectrum Disorder, William Todd Dauterman

CCAC Theses and Dissertations

According to the American Academy of Pediatrics (AAP), 1 in 59 children are diagnosed with Autism Spectrum Disorder (ASD) each year. Given the complexity of ASD and how it is manifested in individuals, the execution of proper interventions is difficult. One major area of concern is how individuals with ASD who have limited communication skills are taught to communicate using Augmentative and Alternative Communication devices (AAC). AACs are portable electronic devices that facilitate communication by using audibles, signs, gestures, and picture symbols. Traditionally, Speech-Language Pathologists (SLPs) are the primary facilitators of AAC devices and help establish the language individuals with …

Factors Influencing Pilot Trust In Electronic Flight Bag Information, Warren Pittorie, Summer Rebensky, Leonia Hunt, Andrew Narkushian, Maria Chaparro, Meredith Carroll

Aeronautics Faculty Publications

Electronic Flight Bags (EFBs) are widely used by pilots in the commercial aviation industry. EFBs serve as replacements for some traditional sources of information, such as paper charts, manuals, and checklists, augmentation for flight-related information previously unavailable through older cockpit systems such as temporary flight restriction locations, and supplemental information such as a secondary display of traffic). By having access to this information, pilots are able to make more effective decisions in various situations. Related literature has shown that decision makers in situations of uncertainty are influenced by a range of factors such as experience, the level of risk in …

Human Factors Considerations For Urban Air Mobility, Bhoomin B. Chauhan, Meredith Carroll

Aeronautics Faculty Publications

Before urban air mobility (UAM) flights are safely integrated into the current airspace system, it is necessary to identify and address human factors issues associated with UAM. Various industry and academic institutions are currently exploring a range of different aspects of UAM, such as vehicle concepts, airspace integration, and ground infrastructure, all of which have human factors implications. These human factors issues, which will heavily influence how UAM operations will evolve with growth in demand and autonomous technology, are in need of research. Potential human factors issues include UAM pilot’s trust in automation, situational awareness, visual scanning, decision-making capabilities, as …

Optimal Onsite Microgrid Design For Net-Zero Energy Operation In Manufacturing Industry, Md Monirul Islam, Mostafizur Rahman, Farzin Heidari, Vinayaka Gude

Electrical and Computer Engineering Faculty Publications

Developing an economic net-zero energy infrastructure for the manufacturing industry can play a critical role to achieve the goal of affordable, reliable, and sustainable clean energy paradigm for the next generation. However, it is quite challenging to develop such an infrastructure due to the uncertain demand of the manufacturing system, intermittent electricity generation from the renewable sources, time of use (TOU) pricing of electricity, and integrated operational planning for the long-term planning horizon. In this paper, a mixed-integer non-linear programming (MINLP) model is developed to economically design an onsite microgrid system considering the critical conditions and achieve a net-zero energy …

Deep Learning-Based Covid-19 Detection System Using Pulmonary Ct Scans, Rajit Nair, Adi Alhudhaif, Deepika Koundal, Rumi Iqbal Doewes, Preeti Sharma

Turkish Journal of Electrical Engineering and Computer Sciences

One of the most significant pandemics has been raised in the form of Coronavirus disease 2019 (COVID19). Many researchers have faced various types of challenges for finding the accurate model, which can automatically detect the COVID-19 using computed pulmonary tomography (CT) scans of the chest. This paper has also focused on the same area, and a fully automatic model has been developed, which can predict the COVID-19 using the chest CT scans. The performance of the proposed method has been evaluated by classifying the CT scans of community-acquired pneumonia (CAP) and other non-pneumonia. The proposed deep learning model is based …

A Novel Design Of Current Differencing Transconductance Amplifier With Hightransconductance Gain And Enhanced Bandwidth, Shireesh Kumar Rai, Rishikesh Pandey, Bharat Garg, Sujit Patel

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, transconductance gain of current differencing transconductance amplifier (CDTA) has been boosted by using a novel approach. Transconductance is generally varied by two well-known techniques. In the first technique, bias current of differential pair MOSFETs is varied whereas in the second technique, aspect ratios of differential pair MOSFETs are changed. The drawbacks of first technique are limited range of transconductance and higher power dissipation whereas second technique restricts dynamic range, output swing and bandwidth of CDTA. To overcome these drawbacks, 2 new structures of CDTA, namely high transconductance gain CDTAs (HTG-CDTA-I & HTG-CDTA-II) have been proposed. HTG-CDTA-I utilizes …

Mismatch Error Shaping Of Dac Unit Elements In Multibit $\Delta$$\Sigma$ Modulators Using A Novel Unified Adc/Dac, Leila Sharifi, Omid Hashemipour

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a unified analog to digital converter (ADC) and digital to analog converter (DAC) for multibit $\Delta\Sigma$ modulators. The unified ADC/DAC circuit provides error shaping for mismatches between DAC unit elements. Hence, the dynamic element matching (DEM) circuit or digital calibration is not required resulting in the area and power saving as well as the elimination of the excess loop delay introduced by DEM circuit. Incorporating a 6-bit unified ADC/DAC, the $\Delta\Sigma$ modulator achieves 16.15-bit resolution utilizing only a second order loop filter and oversampling ratio of 40. The proposed modulator is simulated in a 65-nm CMOS process. …

Fractal Graphene Patch Antennas And The Thz Communications Revolution, Jonathan Blackledge, A. Boretti, L. Rosa, S. Castelletto

Conference papers

Fractal antennas have and are continuing to receive attention in regard to the futureof wireless communications. This is because of their wide- and multi-band capabilities, theopportunity of fractal geometries to drive multiple resonances, and, the ability to make smallerand lighter antennas with fewer components and radiative elements with higher gains. Smallscale (i.e. on the micro- and nano-scale) and ultra high frequency (in the Terahertz or THz range)fractal antennas composed of Graphene have the potential to enhance wireless communicationsat a data rate that is unprecedented, i.e.∼1012bits per second. A Fractal Graphene antennais a high-frequency tuneable antenna for radio communications in the …

Codec-Aware Video Delivery Over Sdns, Obinna Izima, Ruairi Defrein, Ali Malik

Conference papers

To guarantee quality of delivery for video streaming over software defined networks, efficient predictors and adaptive routing frameworks are required. We demonstrate an agent that predicts video quality of delivery metrics in a scalable way using a bespoke codec-aware learning model. We also demonstrate the integration of this agent with an adaptive framework for centrally controlled software-defined networks that re-configures network operational paths in response to the learning agent, ensuring that good quality of delivery of video is maintained during periods of congestion. The demo scenario highlights the feasibility, scalability and accuracy of the framework

Lightning Strike Response Of Composite Structures: A Review, Akhileshwar Pandey, Ashutosh Kumar Upadhyay, Karunesh Kumar Shukla

Journal of Metals, Materials and Minerals

Wind turbines and aircraft are generally made of less conductive carbon/glass composites. Significant damages may occur to these materials if they are struck by high energy lightning strikes. Damage and structural response of composites is essentially a multiphysics domain, involving thermal, electrical, magnetic and structural analysis. In this article, the fundamental physics of lightning, multiphysics analysis, numerical implementation and experimental studies about composite materials are reviewed. The relevant international standards and possible characterization methods of lightning strike damage are also reproduced in this article. In addition to this, the current and prospective technologies, to protect composite from lightning strikes are …

Wear Behavior Of Aluminium 6061 Alloy Reinforced With Coated/Uncoated Multiwalled Carbon Nanotube And Graphene, Vijee Kumar, Kempaiah Ujjaini Nagegowda, Satish Babu Boppana, Ramesh Sengottuvelu, Palanikumar Kayaroganam

Journal of Metals, Materials and Minerals

The current study deals with the fabrication and investigation of wear characteristics of Aluminium 6061(Al6061) hybrid metal matrix composites (MMCs) processed through powder metallurgy technique. Al6061 hybrid MMCs involving fixed 2 wt% of coated/uncoated multiwalled carbon nanotubes (MWCNTs) and varying weight percentages of graphene were fabricated through ball milling procedure. To enhance the scattering of MWCNTs in the matrix, MWCNTs were coated by means of copper through electroless deposition method. Dry sliding wear conduct of Al6061 MMCs was investigated using a pin-on-disc wear testing machine. It was found that at lower load, composites exhibited lower wear resistance than base alloy …

Improvement On Cost-Performance Ratio Of Fiberglass/Carbon Fiber Hybrid Composite, Nathawat Poopakdee, Warut Thammawichai

Journal of Metals, Materials and Minerals

Fiberglass composite (FG) is widely used as a metal substitute in general applications due to its corrosion and chemical resistance, relatively high strength, and low cost. Still, the FG is deficient in performance and relatively heavy for airframes. Carbon fiber composite (CF) is utilized instead as it has greater performance and lower weight. However, the CF is brittle and expensive. Thus, in this work, we combine FG and CF into two types of hybrid composites to achieve a cost-effective solution with greater or comparable mechanical properties to those of CF. The first one uses FG as core and CF as …

Efficiency Of Tri-N-Octylamine For The Liquid-Liquid Extraction Of Co (Ii) From Acidic Chloride Medium, Aishwarya Mishra, Nilam Swain, Sanghamitra Pradhan, Sujata Mishra

Journal of Metals, Materials and Minerals

Cobalt criticality is increasing as a function of time and this concern has impelled researchers to ascertain efficient recovery schemes of cobalt. In this paper, an extraction strategy for cobalt utilizing tri-n-octyl amine (TOA) in kerosene from acidic chloride media has been developed. The extraction percentage was found to be 76.7 using 1.5M TOA. The extracted species has been formulated as (R3NH) CoCl3 based on the findings of slope analysis. Influence of various salting out agents like NH4Cl, KCl, and NaCl on the percentage extraction has been analysed and KCl emerged as beneficial for extraction. The estimated values of enthalpy …

Microstructure And Properties Of Zirconia-Alumina Composites Fabricated Via Powder Injection Molding, Nalattaporn Saelee, Nutthita Chuankrerkkul, Panitarn Wanakamol

Journal of Metals, Materials and Minerals

This study aimed to fabricate zirconia-alumina composites via powder injection molding and investigated the effects of alumina addition on microstructure as well as physical properties of the composites. Zirconia-alumina composites were prepared using polyethylene glycol (PEG) and polyvinyl butyral (PVB) as binders.  The powder loading was fixed at 38 vol%, and PEG: PVB binder weight ratio was fixed at 80:20.  Alumina content within ceramic component was varied at 0, 10, 20, 30, 40 and 50 vol% to observe the effect of alumina on the composite structures and properties. The injection molding was done at 190℃ followed by water debinding of …

Enhancing Stability And Antioxidant Efficacy Of Fisetin By Encapsulating As Β-Cyclodextrin Inclusion Complex With Porous Polylactic Acid Film From Breath Figure, Charasphat Preuksarattanawut, Warinyupa Mangmee, Munchumas Prousoontorn, Ekasit Nisarattanaporn, Krisana Siraleartmukul

Journal of Metals, Materials and Minerals

This research aims to investigate the scope of fisetin (FIT)/β-cyclodextrin (β-CD) inclusion complexes with the ratios of 1:2 and 2:1 mole by means of freeze-drying, kneading and physical mixing methods (controlled process). Moreover, the complex compounds are analyzed by Fourier-Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). The results show that the most suitable preparation method of fisetin (FIT)/β-CD complex is the freeze-drying method with the fisetin (FIT) to β-CD ratio at 1:2. The emission of FIT/β-CD was investigated and it is found that the emission rate of freeze-dried FIT/β-CD in 1:2 ratio by freeze-drying method is lower than …

Study Of Mechanical Properties And Characteristics Of Eco-Fibres For Sustainable Children's Clothing, Siti Shukhaila Shaharuddin, Marzie Hatef Jalil, Kaveh Moghadasi

Journal of Metals, Materials and Minerals

The aim of this paper is to study the application of eco-fibres as a new approach to achieve the multifunctional design for children’s clothing toward sustainability in the clothing industry. In this regard, this study focuses on the evaluation of the fabrics’ mechanical properties including tensile strength and microstructural details as critical points for multifunctional children's clothing purposes. The eco-fibre fabrics studied are organic cotton twill and recycled polyester. Studies have proven that frequent laundering and dry-cleaning result in increased pilling. Furthermore, high quality of colour fastness properties was found in 100% organic woven cotton fabric and recycled polyester fabric …

Effect Of Micro Graphite Particles On The Microstructure And Mechanical Behavior Of Aluminium 6061 (Al-Mg-Si) Alloy Composites Developed By Novel Two Step Casting Technique, Madeva Nagaral, Raghavendra Pai K., V. Auradi, Bharath V., Shanawaz Patil, Mahantesh S. Tattimani

Journal of Metals, Materials and Minerals

In the present research, the effect of micron sized graphite addition on the microstructure and tensile failure of Al6061 alloy has been studied. The Al6061 alloy metal matrix composites reinforced with 6, 9 and 12 varying weight percentages of graphite particles were fabricated by novel two step stir cast route which helps in improving the wettability of Al6061 alloy matrix with graphite particles. The synthesized composites were subjected to microstructural studies, density, hardness and tensile properties testing. Microstructural characterizations of obtained samples were carried out by SEM microscopy, EDS and XRD patterns. The occurrence of graphite particles were confirmed by …

Sustainable Valorization Of Sugarcane Leaves For Succinic Acid And Biochar Production, Nuttaporn Chokesawatanakit, Pasakorn Jutakridsada, Khanita Kamwilaisak

Journal of Metals, Materials and Minerals

The leaves of sugarcane (Saccharum officinarum) are agricultural waste that is burnt before harvesting. This project aims to find an alternative way to increase the value of sugarcane leaves and decrease air pollution by using the leaves as raw material to produce succinic acid and biochar. Reducing sugars were extracted from the leaves by H2SO4 hydrolysis. The sugars were then fermented by Yarrowia lipolytica TBRC 4417 to produce succinic acid. The solid residue was used as the raw material for biochar production by pyrolysis. The effects of pyrolysis temperature (350, 400, and 450℃) and nitrogen gas flow rate (5, 10, …

Assessment Of Hydrothermal Parameters On Alkaline Activation Of Fly Ashes Using A Central Composite Design, Ivan Supelano García, César Armando Ortíz Otálora, Carlos Arturo Parra Vargas, Julieth Alexandr Mejía Gómez

Journal of Metals, Materials and Minerals

Coal fly ash (CFA) is a powder generated during combustion of coal; its improper disposal constitutes an environmental issue. To minimize this problem, one of the uses of CFA is as feedstock for production of zeolite. Different studies have shown that zeolites may be easily obtained from CFA by relatively cheap and fast conversion processes. Most of these studies have been focused on the study of the zeolite synthesis using classical methods through changing one factor per time and fixing the other factors, where it illustrates the impact of each variable individually via a huge number of experiments, however it …

Debinding Behaviour And Sintering Temperature-Dependent Features Of Coloured Zirconia Fabricated By Ceramic Injection Moulding, Wantanee Buggakupta, Thanakorn Wasanapiarnpong, Nutthita Chuankrerkkul

Journal of Metals, Materials and Minerals

Zirconia (ZrO2) is one of ceramic materials that has very good mechanical and chemical properties suitable for biomedical applications as well as other industrial applications. ZrO2 ceramics, in fact, has been used in orthodontic dentistry. Nowadays, ZrO2 has been played its role in decorative and jewelry purposes, such as watchcases and artificial stones. Ceramic injection moulding (CIM), a near-net shape manufacturing process that can produce small, complex-shaped components and is suitable for large volume production, is one of the best powder fabrication methods. In this work, CIM was carried out in order to form the coloured-ZrO2 specimens. Binders used in …

Effects Of Annealing Treatment On Microstructure And Hardness In The 28 Wt% Cr Cast Iron With Mo/W Addition, Kittikhun Ruangchai, Ruangdaj Tongsri, John Thomas Harry Pearce, Torranin Chairuangsri, Amporn Wiengmoon

Journal of Metals, Materials and Minerals

In this study, the effects of annealing on the hardness and microstructure of 28 wt% Cr-2.6 wt% C iron with 1.4 wt% Mo/1 wt% W addition have been investigated. The as-cast samples were heated to 800℃ and held for 4 h followed by slow cooled with a cooling rate of 20℃h-1 to 500℃. Microstructures were characterized by X-ray diffractometry, optical microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Vickers macro-hardness and micro-hardness were measured. It was found that the as-cast microstructure in the hypoeutectic 28 wt% Cr iron without Mo or W addition consisted of primary austenite dendrite, eutectic M7C3 …

Mechanical Properties And Ionic Conductivity Of Biodegradable Materials In Solid Polymer Electrolyte, Fatin Arhana Awang, Mohd Faiz Hassan, Khadijah Hilmun Kamarudin

Journal of Metals, Materials and Minerals

No abstract provided.

Electrochromic Property Of Tungsten Trioxide Films Prepared By Dc Magnetron Sputtering With Oblique Angle Deposition And Thermal Oxidation, Chantana Aiempanakit, Areeya Chanachai, Nattaya Kanchai, Montri Aiempanaki, Kamon Aiempanakit

Journal of Metals, Materials and Minerals

In this work, WO3 thin films were prepared in two steps: First, tungsten (W) films with thickness of 100-300 nm were deposited by DC magnetron sputtering with oblique angle deposition (OAD) technique at 0 and 85. Second, sputtered W films were annealed under air atmosphere at a temperature of 500℃ and different oxidation times for 1-3 h. The structure of WO3 thin films were examined by X-ray diffraction and field emission scanning electron microscope. In addition, the optical and electrochromic properties of the WO3 thin films were measured by a spectrophotometer before and after testing in potassium hydroxide electrolytes. The …

Improvement Of Alkali Resistance Of Glass Fiber From Basalt And Lignite Bottom Ash Mixture By Addition Of Zro2 Content, Apirat Theerapapvisetpong, Phraethong Kwanpanngam, Thanapat Tamrongwongwi

Journal of Metals, Materials and Minerals

No abstract provided.

New Views On The Ingenious Applications Of Ag Nanoparticles As A Sensor For Antibiotic Detection And As A Potent Antimicrobial Agent, Keyur Bhatt, Anita Kongor, Mohd Atharb, Vinod Jain

Journal of Metals, Materials and Minerals

Nanotechnology uses exceptional approaches for the control of bacterial infections which uncovers the potential function of bio-systems at nano-scale level. Compared to silver ions, silver nanoparticles possess enhanced physicochemical stability and low bio-toxicity properties. The intrinsic chemical framework of silver nanoparticles is prone to exhibit a significant chemistry when used as sensor and as therapeutic. Nowadays, silver is used in (nano-) medicine, in the form of nanoparticles to optimize its therapeutic property for controlling infections caused by multidrug-resistant bacteria. Exclusive use of antibiotics as medicines and its discharge from the body of the infected person or animals into the sewage …