Engineering Commons^™

Polyethyleneimine-Based High Yield Fluorescent Soluble Covalent Organic Framework, Haonan Wang

USF Tampa Graduate Theses and Dissertations

In this thesis, we report a novel covalent organic framework (COF) with fluorescence and water-soluble features, F-COF-PT with high gravimetric yield (~ 89%), that was generated by the reactions of branched polyethyleneimine (PEI) and 1,3,6,8-Tetrabromopyrene (TBP). The surface area and pore volume were about up to 63.2 m2/g and 0.41 m3/g. The prepared COFs maintained the TBP fluorescent performance in water solutions at 440-460 nm. Furthermore, Cu(II) ion solution would impact the quenching activity with F-COF-PT3, and NaOH treated F-COF-PT3 has the 5.6 m2/g capacity of uptake CO2. Finally, the zeta potential and particle diameter of original and treated F-COF-PT3s …

Plasma Treatment Of High-Density Polyethylene, Linear Low-Density Polyethylene, And Polyvinyl Chloride Geomembranes By Air And Oxygen, Merve Koca Uyar

USF Tampa Graduate Theses and Dissertations

High-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), and polyvinyl chloride (PVC) geomembranes were treated with air and oxygen plasma. The purpose of air and oxygen plasma treatment of geomembrane surface is to increase the surface wettability of these materials, thereby increasing adhesive properties. Increasing adhesive properties enables a surface to be coated with a desired material with antibacterial, antioxidant, and UV resistant characteristics, without changing bulk material properties. To protect the geomembranes from oxidation degradation, UV degradation and biological degradation, it is important to increase the antibacterial, antioxidant, and UV resistant properties of geomembrane. Before and after the plasma treatments …

Modeling The Ambient Conditions Of A Manufacturing Environment Using Computational Fluid Dynamics (Cfd), Yang Liu

USF Tampa Graduate Theses and Dissertations

As manufacturing equipment evolve to higher speed and require high precision operations, the impact of environmental changes on machine accuracy becomes critical. Due to thermal expansion, the structure of the machine can change when ambient temperature varies. When the airflow in the laboratory changes, this also alters the operator's thermal comfort. Either the change in machine structure or operator comfort can ultimately affect machine accuracy. The manufacturing industry is currently using heating, ventilation, and air-conditioning (HVAC) systems to regulate the temperature of the working environment. However, since conventional HVAC systems determine whether to activate the HVAC system by collecting the …

Parents’ Perspectives On A Smartwatch Intervention For Children With Adhd: Rapid Deployment And Feasibility Evaluation Of A Pilot Intervention To Support Distance Learning During Covid-19, Franceli L. Cibrian, Elissa Monteiro, Elizabeth Ankrah, Jesus A. Beltran, Arya Tavakoulnia, Sabrina E. B. Schuck, Gillian R. Hayes, Kimberley D. Lakes

Engineering Faculty Articles and Research

Distance learning in response to the COVID-19 pandemic presented tremendous challenges for many families. Parents were expected to support children’s learning, often while also working from home. Students with Attention Deficit Hyperactivity Disorder (ADHD) are at particularly high risk for setbacks due to difficulties with organization and increased risk of not participating in scheduled online learning. This paper explores how smartwatch technology, including timing notifications, can support children with ADHD during distance learning due to COVID-19. We implemented a 6-week pilot study of a Digital Health Intervention (DHI) with ten families. The DHI included a smartwatch and a smartphone. Google …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

État Des Récentes Avancées En Matière De Développement De Sièges À Suspension, Subhash Rakheja, Pierre Marcotte, Karim Hamouda, Krishna Dewangan, Darshan Dorugade

Rapports de recherche scientifique

Dans divers secteurs d’activité du Québec, les conducteurs de véhicules sont exposés à des niveaux notables de vibrations globales du corps (VGC) et à des chocs intermittents, associés dans les deux cas à un risque accru de douleurs lombaires et de dégénérescence de la colonne vertébrale. Les sièges à suspension sont largement utilisés pour limiter l'exposition des conducteurs aux VGC. L’efficacité d'un siège à suspension à réduire les vibrations est fortement dépendante de la nature des vibrations du véhicule (amplitude, direction et fréquence). Un siège à suspension ne peut donc offrir une efficacité optimale que lorsque la suspension est mise …

State-Of-The-Art In Recent Developments Concerning Suspension Seats, Subhash Rakheja, Pierre Marcotte, Karim Hamouda, Krishna Dewangan, Darshan Dorugade

Rapports de recherche scientifique

Dans divers secteurs d’activité du Québec, les conducteurs de véhicules sont exposés à des niveaux notables de vibrations globales du corps (VGC) et à des chocs intermittents, associés dans les deux cas à un risque accru de douleurs lombaires et de dégénérescence de la colonne vertébrale. Les sièges à suspension sont largement utilisés pour limiter l'exposition des conducteurs aux VGC. L’efficacité d'un siège à suspension à réduire les vibrations est fortement dépendante de la nature des vibrations du véhicule (amplitude, direction et fréquence). Un siège à suspension ne peut donc offrir une efficacité optimale que lorsque la suspension est mise …

Method Of Making Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith

AFIT Patents

A method of making passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes forming a three-dimensional microscopic optical structure on a cleaved tip of an optical fiber that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.

Material And Topographically Optimized Thermal Dissipation For High-Performance Electronic Devices Utilizing Vapor Chambers, Derek Joseph Daniels

USF Tampa Graduate Theses and Dissertations

Advances in materials science and engineering in the field of thermal transport and dissipation enable the use of higher-performance electronic devices that are smaller and generate more heat. Phase change thermal transport systems such as heat pipes and vapor chambers enable passive dissipation from devices that generate excessive heat without the need for actively pumped cooling systems. Properly designed vapor chamber enabled systems easily exceed the thermal conductivity of manufactured diamond at a small fraction of the cost.[1][2][3] While heat pipe phase change systems are generally one-dimensional with a limited cross section, vapor chambers are generally two-dimensional with a small …

Texturing In Bi2Te3 Alloy Thermoelectric Materials: An Applied Physics Investigation, Oluwagbemiga P. Ojo

USF Tampa Graduate Theses and Dissertations

Thermoelectric devices provide the means for direct conversion between heat and electricity. The device conversion efficiency, or performance, is directly related to the thermoelectric figure of merit, ZT, of the working materials. Bismuth telluride alloys are the materials currently in use in most thermoelectric devices for near room temperature solid-state refrigeration and power conversion applications. The vast majority of publications in the literature on thermoelectricity report on investigations towards developing new materials with enhanced thermoelectric properties, however Bi₂Te₃ alloys have been used in thermoelectric devices for decades.

In this thesis, an investigation of crystallographic texturing on large …

Observed Risk And User Perception Of Road Infrastructure Safety Assessment For Cycling Mobility, Salvatore Cafiso, Giuseppina Pappalardo, Nikiforos Stamatiadis

Civil Engineering Faculty Publications

The opportunities for data collection in smart cities and communities provide new approaches for assessing risk of roadway components. This paper presents and compares two different methodological approaches for cycling safety assessment of objective and perceived risk. Objective risk was derived from speed and direction profiles collected with Global Navigation Satellite System (GNSS) and camera installed on an instrumented bicycle. Safety critical events between cyclists and other road users were identified and linked to five different roadway components. A panel of experts was asked to score the severity of the safety critical events using a Delphi process to reach consensus. …

Assessing The Vertical Displacement Of The Grand Ethiopian Renaissance Dam During Its Filling Using Dinsar Technology And Its Potential Acute Consequences On The Downstream Countries, Hesham El-Askary, Amr Fawzy, Rejoice Thomas, Wenzhao Li, Nicholas Lahaye, Erik Linstead, Thomas Piechota, Daniele Struppa, Mohamed Abdelaty Sayed

Mathematics, Physics, and Computer Science Faculty Articles and Research

The Grand Ethiopian Renaissance Dam (GERD), formerly known as the Millennium Dam, is currently under construction and has been filling at a fast rate without sufficient known analysis on possible impacts on the body of the structure. The filling of GERD not only has an impact on the Blue Nile Basin hydrology, water storage and flow but also poses massive risks in case of collapse. Rosaries Dam located in Sudan at only 116 km downstream of GERD, along with the 20 million Sudanese benefiting from that dam, would be seriously threatened in case of the collapse of GERD. In this …

Expedited Pcr With Stirring, Hendrik J. Viljoen

Department of Chemical and Biomolecular Engineering: Faculty Publications

Disclosed are an apparatus and methods for rapid amplifi cation of nucleic acids . More particularly , the present dis closure relates to an apparatus for mixing a reaction solution during amplification of nucleic acids and to methods for amplifying nucleic acids . Also disclosed are methods for lysing cells in a sample and amplifying nucleic acids .

Expedited Pcr With Stirring, Hendrik Viljoen

Department of Chemical and Biomolecular Engineering: Faculty Publications

Disclosed are an apparatus and methods for rapid amplification of nucleic acids. More particularly, the present dis closure relates to an apparatus for mixing a reaction solution during amplification of nucleic acids and to methods for amplifying nucleic acids. Also disclosed are methods for lysing cells in a sample and amplifying nucleic acids.

Evolution Of Publications, Subjects, And Co-Authorships In Network-On-Chip Research From A Complex Network Perspective, Weilong Chen, Xiaohang Wang, Ye Sun, Qiao Hu, Letian Huang, Yingtao Jiang, Amit Kumar Singh, Terrence Mak, Mei Yang

College of Engineering Faculty Research

The academia and industry have been pursuing network-on-chip (NoC) related research since two decades ago when there was an urgency to respond to the scaling and technological challenges imposed on intra-chip communication in SoC designs. Like any other research topic, NoC inevitably goes through its life cycle: A. it started up (2000-2007) and quickly gained traction in its own right; B. it then entered the phase of growth and shakeout (2008-2013) with the research outcomes peaked in 2010 and remained high for another four/five years; C. NoC research was considered mature and stable (2014-2020), with signs showing a steady slowdown. …

Medium Conditons And Influence Mechanism Of High Salinity Mine Water Transfer And Storage By Deep Well Recharge, Li Xin, Sun Yajun, Chen Ge, Wang Houzhu, Zhang Zhijun

Coal Geology & Exploration

In the arid and semi-arid regions of the Western China, there is not only a shortage of water resources, but also the problems of large mine water inflow and high salinity of mine water. In order to reduce the waste of water resources in the mining activities and protect water ecological environment in the region, it is proposed to treat the mine water by deeper well recharge to the aquifers under the coal seam based on the theories and technical methods such as mine water transfer and storage, water-preserving mining and coal-water dual resource coordinated mining. A test well project …

Medium Characteristics And Hydrodynamic Evolution Law Of High Salinity Mine Water Recharge In Deep Well, Liu Qi, Wang Weijun, Luo Bin, Wang Houzhu, Zhang Zhijun

Coal Geology & Exploration

The treatment and discharge of high salt mine water is one of the important factors affecting efficient coal mining in recent years. It is a worth exploring method to reduce the discharge of mine water by selecting the appropriate aquifer under the floor of the coal seam and transferring the high salt mine water to other places. Taking the X mine in the Ordos Basin as an example, the Baotashan sandstone and the deep Liujiagou Formation sandstone formation below the coal seam have transfer storage space. By mercury intrusion experiment and rock mechanics analysis, the two groups of formations were …

Mine Water Drainage Pollution In China's Coal Mining Areas And The Construction Of Prevention And Control Technical System, Sun Yajun, Xu Zhimin, Li Xin, Zhang Li, Chen Ge, Zhao Xianming, Gao Yating, Liu Qi, Zhang Shangguo, Wang Weijun, Zhu Lulu, Wang Sheng

Coal Geology & Exploration

Mining activities are bound to produce enormous mine water drainage. Mine water in China shows relatively poor water quality and high cost of water treatment and other problems. Firstly, the main characteristics of mine water quality in China's typical mine areas are clarified in this paper: conventional ions are the main chemical components causing poor mine water quality; mine water has a small proportion of toxic and harmful substances, which is generally better than the quality standard of class Ⅲ groundwater. Secondly, some scientific issues on the formation and evolution of mine water quality are discussed in detail, including the …

Hydrochemical Characteristics And Genetic Mechanism Of High Tds Groundwater In Xinjulong Coal Mine, Zhang Yuzhuo, Xu Zhimin, Zhang Li, Lyu Weikui, Yuan Huiqing, Zhou Lijie, Gao Yating, Zhu Lulu

Coal Geology & Exploration

Based on historical water quality data and sampling test results, using Piper three-line diagram, correlation analysis, hydrogen and oxygen isotope, Gibbs diagram, ion ratio and saturation index, etc., the hydrochemical characteristics and genetic mechanism of the groundwater with high TDS in Xinjulong Coal Mine area were explored. The results show that with the proceeding of mine construction and coal mining, the water chemistry environment in the study area has changed. The water chemistry type is no longer a single SO₄-Na type, with SO₄·HCO₃-Na and SO₄-Ca·Mg type appearing in the deep limestone water. …

Gas Emission-Based Determination Of The Reasonable Driving Speed In Coal Roadway, Fu Shuai, Si Qingmin, Wang Qifei, Guo Xinyao, Zhang Hongtu

Coal Geology & Exploration

Scientific determination of the tunneling speed is an important prerequisite for the safe and efficient production in coal mines with high gas and outburst. In order to determine the reasonable driving speed of coal roadway and reduce the occurrence of dynamic disasters in coal roadway driving, the distribution law of gas in roadway head was analyzed, the mathematical model was established. Gas emission characteristics were also analyzed at different driving speeds based on the model. Taking Jinhui Wanfeng Coal Mine as an example, the reasonable driving speed was determined in this coal mine based on its gas emission characteristics. Results …

Collapse Filling-Based Technology Of Weakening And Danger-Solving By Staged Fracturing In Hard Roof, Zheng Kaige, Yang Junzhe, Li Bingang, Li Yanjun, Dai Nan, Yang Huan

Coal Geology & Exploration

The working face is easy to induce dynamic disasters such as rock burst, coal and gas outburst, mine earthquake and hurricane in goaf under the condition of hard roof, which seriously threatens the safety of mine production. the pre-weakening and risk-solving technology of staged fracturing in hard roof is proposed based on the mode of advanced weakening by staged fracturing through open holes, combined with the synergetic support concept with "fracturing collapse body+coal pillar+load-bearing rock layer". By using the methods of theoretical analysis, technical research and development and engineering application, the crisis mechanism of advanced weakening of the staged fracturing …

De-Blocking Technology And Application Of High-Rank Cbm Well In Junlian Region In Sichuan Province, Peng Lisha, Zhang Yimin, Xiong Wei, Zhao Dan, Luo Kai

Coal Geology & Exploration

The coal seams of Leping Formation in Junlian area are high-rank coal reservoir with low porosity and low permeability. The gas production of some coalbed methane wells decreases rapidly in the production process, which seriously restricts the benefit development of coalbed methane wells. Combined with the production data such as drainage, hydrochemistry and pump inspection, this paper analyzes the reasons for the decline of gas production. The main reasons for the decline are coal scaling and coal fines blockage. Targeted measures such as acid pickling, hydraulic shock, plasma pulse and water injection are carried out to remove the blockage. The …

Discussion On Overburden Zoning Model After Mining And Its Engineering Significance, Lyu Yuguang, Qiao Wei, Cheng Jianyuan, Cui Ping

Coal Geology & Exploration

The mechanical state of overburden after mining is directly related to roof accidents and roof water disasters, so it is necessary to study the overburden structure after mining. The "New Four Zones" model of overburden structure is proposed: caving zone, fracture zone, bedrock separation zone and loose alluvium zone. Combined with the previous "Three Zones" model and "Four Zones" model, this paper makes a spatial comparative analysis to clarify the spatial relationship of the three zoning models. It discusses the scientific nature of the "New Four Zones" model in terms of the influence of mining on water level of the …

Experimental Study On Visual System For Water-Blocking Process Of Hydrodynamic Roadway By Aggregate Pouring In Water Inrush Mine, Mou Lin

Coal Geology & Exploration

Blocking water of hydrodynamic roadway by aggregate pouring in water inrush mines is an important method for mine rescue. To study its mechanism, the experimental platform of similar simulation test was established based on such factors as water head height, flow rate, roadway size, inclination angle, roughness, aggregate particle size and perfusion speed. Based on the platform, single-hole and multi-hole pouring tests were carried out to analyze the movement and accumulation law of aggregate in hydrodynamic pathway. The results are as follows. Firstly, the accumulation body has the characteristics of migration and growth to the downstream during the normal pouring …

Statistical Regularity Of Physical And Mechanical Indexes Of Secondary Red Clay In Chenggong District, Kunming, Gao Haiyan, Zhang Jiaming

Coal Geology & Exploration

In order to analyze the statistical regularity of physical and mechanical indexes of secondary red clay in Chenggong District, Kunming, the index data of 275 groups of secondary red clay samples from 69 geotechnical investigation boreholes in Wujiaying area of Chenggong are taken as the research object. Based on the statistical analysis principle, the variation range, average value, standard deviation, coefficient of variation of 13 indexes and the correlation between indexes and depth are analyzed by SPSS statistical analysis software, and the physical and mechanical properties of secondary red clay are summarized. Then, the linear empirical formula between indexes is …

Distribution Characteristics And Paleo-Climatic Significance Of Continental Climate-Sensitive Sediments In The Late Cretaceous In China, Bin Xu, Fang Xiang, Shuxia Li

Coal Geology & Exploration

The Cretaceous is a typical period for studying the greenhouse climate and the earth system interactions, and the world's most extensive terrestrial strata are mainly in East Asia, especially in China. Continental sediments can effectively reflect the paleo-climate change, but the previous studies of the Late Cretaceous paleo-climate, based on the combined characteristics of continental climate-sensitive sediments, were barely found in China. To obtain the Late Cretaceous paleo-climate characteristics of China, the distribution characteristics of different continental climate-sensitive sediment types in the early, middle and Late Cretaceous in China were studied in detail. According to the distribution and combination characteristics …

Blending Interference Noise Separation Method Of Simultaneous Source Seismic Data Based On Multi-T-X Domain Combination, Yu Dai, Huang Dezhi, Sun Yuan, Yang Wenping

Coal Geology & Exploration

With the increasing application of simultaneous source seismic data acquisition method in seismic oil and gas exploration, many scholars have studied the key technology of simultaneous source seismic data blending interference noise separation. So far, research on methods with higher fidelity is still needed. This article is based on the following assumptions: Normal Moveout Correction(NMO) in simultaneous source seismic data can enhance the linear distribution degree of reflection(especially in Common Middle Point(CMP) gather), and expand the distribution difference of reflection and blending interference noise; single domain separation of blending interference noise only aims at a certain distribution characteristic difference of …

Influence Of Surrounding Rock Changes On The Coal Seam Reflected Wave Under Thin Interbed Condition, Chang Suoliang, Zhang Sheng, Liu Jing, Liu Zuiliang, Chen Qiang, Liu Bo

Coal Geology & Exploration

In order to study the influence of the changes of surrounding rock on the reflected wave of coal seam under the condition of thin interbeds, the coal-bearing strata in the λ/4 thin layer range in seismic exploration is taken as the research object, and three types of models of surrounding rock lithology, thickness and structure change are established. By Brekhovskikh equation in the theory of thin-bed reflection coefficient spectrum, the influence of surrounding rock changes on the AVO curve, attributes and gathers of coal seams are calculated and summarized. The research results show that the changes of surrounding rock …

Research On Three-Component Response Of Ground-Airborne Tem Considering Emission Current Waveform, Hou Yanwei, Guo Jianlei, Si Yinnyu, Jiang Tao

Coal Geology & Exploration

The ground-airborne TEM has received more and more attention in coal goaf exploration and other fields. In order to provide a theoretical basis for the processing and interpretation of ground-airborne transient electromagnetic data, it is necessary to study the influence of the transmitted current waveform parameter on the three-component response characteristics of ground-airborne TEM. Taking trapezoidal waves as an example, this article firstly studies the frequency distribution of different emission current waveform, and then investigates the effects of the rising edge time, pulse width and turn-off time of the transmitted waveform on the three-component magnetic field response of ground-air transient …

Research On The Integrated Electric Exploration System For Coal Mines And Its Application, Liu Baobao, Guo Chun, Yang Haitao

Coal Geology & Exploration

In order to overcome the shortcomings of the existing electrical prospecting technology in coal mines, such as multiple construction of electrical sounding, electrical profile and electrical penetration and a scarcity of data collected, an integrated electrical prospecting system is successfully designed, absorbing the idea of parallel electrical data acquisition, and applying the "rectangular wave" electrode layout mode combined with the "multi device data extraction" technology. The experimental results show that the system can complete the original data acquisition of electrical sounding, electrical profile, electrical perspective and other electrical construction methods with one-time wiring and one-round power supply, and extract the …