Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 8551 - 8580 of 8951

Full-Text Articles in Engineering

Effect Of Metal Oxides On Zirconia For Ketonic Decarboxylation Of Methyl Stearate, Pawaphat Sartsri Jan 2018

Effect Of Metal Oxides On Zirconia For Ketonic Decarboxylation Of Methyl Stearate, Pawaphat Sartsri

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this research, the effect of characteristics of zirconia and metal oxide modified zirconia catalysts on the catalytic performance were investigated by ketonic decarboxylation of methyl stearate to desired ketone product at the optimal condition (400°C and 1 bar). Zirconia and metal oxide modified zirconia catalysts were characterized by using X-ray diffraction (XRD), Scanning electron microscope (SEM), N2-physissorption, X-ray photoelectron spectroscopy (XPS), and IR spectra of pyridine adsorption (Pyridine-IR). The results indicated that the transition metal oxide group modified zirconia catalysts have higher contents of total Lewis acid site and oxygen vacancies site, and lower content of total Brønsted acid …

Go to article

Regeneration Of Zinc Particles For Zinc-Air Battery By Spouted-Bed Electrochemical Reactor, Peerawat Puengthaijaroen Jan 2018

Regeneration Of Zinc Particles For Zinc-Air Battery By Spouted-Bed Electrochemical Reactor, Peerawat Puengthaijaroen

Chulalongkorn University Theses and Dissertations (Chula ETD)

Zinc-air batteries are a promising energy storage system due to its high energy density, low toxicity, and low flammability. They are currently used commercially in low-current devices. Batteries for high-current applications are constructed with zinc particles for increased specific surface areas. Nevertheless, the regeneration of zinc particles from dissolved zincate ions in spent electrolytes has been relatively neglected. We fabricate and study a spouted-bed electrochemical reactor for the regeneration of zinc particles from spent electrolytes. The reactor measures 220 mm high and 130 mm wide with copper as a cathode and stainless steel as an anode. The reactor is separated …

Go to article

Dual-Electrolyte System For Suppressing Corrosion Of Aluminum Electrode In Aluminum-Air Flow Battery, Pemika Teabnamang Jan 2018

Dual-Electrolyte System For Suppressing Corrosion Of Aluminum Electrode In Aluminum-Air Flow Battery, Pemika Teabnamang

Chulalongkorn University Theses and Dissertations (Chula ETD)

Aluminum-air batteries have received considerable attention as an electrical power source due to their theoretical specific capacity reaching 2.98 Ah/g. Further, Al-air batteries are abundant and low cost. On the other hand, the aluminum in the batteries has a problem, such that it is subject to self-corrosion in alkaline. Herein, this work concentrates on the aluminum's corrosive behavior and self-corrosion in methanol-3M KOH mixed solution containing different percentages of deionized water i.e. (0, 5, 10 and 20)%wt, using electrochemical (half-cell testing). The aluminum-air battery consists of: aluminum anode | anolyte | anion exchange membrane | catholyte | air cathode. The …

Go to article

Reaction Mechanism And Pathway For The Selective Photocatalytic Hydrogenation Of Nitroaromatics Over Tio2 In Alcohols, Pimchanok Nakchuai Jan 2018

Reaction Mechanism And Pathway For The Selective Photocatalytic Hydrogenation Of Nitroaromatics Over Tio2 In Alcohols, Pimchanok Nakchuai

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research investigated the mechanism and photocatalytic performance of the selective photocatalytic hydrogenation of different nitroaromatics (Ar-NO2) in several alcohols under UV light using P25-TiO2 at room temperature and atmospheric pressure. The effect of Pt-deposited P25-TiO2 on the photocatalytic performance was also studied. Ar-NO2 was converted to aminoaromatics (Ar-NH2) with high Ar-NO2 conversion and Ar-NH2 selectivity at nearly 100%. The amounts of Ar-NH2 were proportional with carbonyl compounds at the ratio around 1:3. Acetaldehyde, acetone, and butanone were produced by oxidation of ethanol, 2-propanol, and butanol, respectively. Ethanol exhibited the fastest completed Ar-NO2 conversion due to the most efficient formation …

Go to article

Oxidative Dehydrogenation Of Ethanol To Acetaldehyde Over Magnesium Aluminium Layered Double Hydroxides Catalyst, Piriya Pinthong Jan 2018

Oxidative Dehydrogenation Of Ethanol To Acetaldehyde Over Magnesium Aluminium Layered Double Hydroxides Catalyst, Piriya Pinthong

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this research, the characteristic and catalytic activity of Mg-Al LDH and their metal-modified mixed oxide were investigated. This research was divided into three parts. In the first part, the effect of calcination temperature on catalytic performance via oxidative dehydrogenation of ethanol was elucidated. The results showed that calcination temperature affected the characteristic of Mg-Al LDH, especially basicity. Moreover, the calcination temperature also affected the catalytic performance on oxidative dehydrogenation of ethanol over Mg-Al LDH. The result was consistent with the basicity of catalysts. In the second part, the Mg-Al mixed oxide derived from calcination of Mg-Al LDH was modified …

Go to article

Effects Of Immobilization Of Methylalumoxane On Cellulose Support On Ethylene Polymerization Behaviors., Praonapa Tumawong Jan 2018

Effects Of Immobilization Of Methylalumoxane On Cellulose Support On Ethylene Polymerization Behaviors., Praonapa Tumawong

Chulalongkorn University Theses and Dissertations (Chula ETD)

The way to improve the physical properties of polyethylene is done by adding nano-sized filler during the synthetic process. These can be commonly achieved by in situ polymerization. These studies are divided into two parts in this research. Firstly, it investigated the effect of types and amounts of cocatalyst and scavenger of zirconocene catalyst on ethylene polymerization behaviors. In fact, methylalumoxane (MAO) and triethylaluminum (TEA) were used as cocatalyst and scavenger, respectively. The ratios of [Al]MAO/[Zr]cat and [Al]TEA/[Zr]cat were varied during the in situ polymerization of ethylene. The polymerization was performed in a semi-batch autoclave reactor under adiabatic operation at …

Go to article

Development Of Suture Pad From Silk-Reinforced Polydimethylsiloxane Composite, Radhitya Banuaji Prastowo Jan 2018

Development Of Suture Pad From Silk-Reinforced Polydimethylsiloxane Composite, Radhitya Banuaji Prastowo

Chulalongkorn University Theses and Dissertations (Chula ETD)

The aim of this research is to investigate the mechanical properties of polydimethylsiloxane reinforced with short silk fibers for suture pad application. The effect of aspect ratio and fibers content of the polydimethylsiloxane reinforced with silk fibers on the properties was evaluated. From the results, tensile modulus and tensile strength of polydimethylsiloxane reinforced with different aspect ratio were increased with increasing aspect ratio and fibers content. The composite with the addition of silk fiber produces higher tear resistance with suture thread compared with pure polydimethylsiloxane. Furthermore, the hardness of polydimethylsiloxane reinforced with short silk fibers was improved with the addition …

Go to article

Design Of Solid Oxide Fuel Cell-Molten Carbonate Fuel Cell Combined System For Power Generation And Carbon Dioxide Emission Reduction, Prathak Jienkulsawad Jan 2018

Design Of Solid Oxide Fuel Cell-Molten Carbonate Fuel Cell Combined System For Power Generation And Carbon Dioxide Emission Reduction, Prathak Jienkulsawad

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research concentrates on the design and performance analysis of a solid oxide fuel cell (SOFC) and a molten carbonate fuel cell (MCFC) integrated system with using methane as fuel. Because SOFCs cannot completely use their fuel, there is remaining fuel leaving the system. In addition, the exhaust gas from an SOFC can be directly fed into an MCFC. The integrated fuel cell system shows an electrical efficiency of 55.22%, which is higher than a single fuel cell system. Fuel utilization of both fuel cells, SOFC temperature dramatically affect the performance of the integrated system. Four configurations were next proposed …

Go to article

Effect Of Calcination Conditions Of P25-Tio2 On Photocatalytic Selective Hydrogenation Of 3-Nitrostyrene, Saknarin Chaitaworn Jan 2018

Effect Of Calcination Conditions Of P25-Tio2 On Photocatalytic Selective Hydrogenation Of 3-Nitrostyrene, Saknarin Chaitaworn

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this work, we investigated the effect of calcination of nanocrystalline commercial titanium dioxide catalyst (P25) on photocatalytic selective hydrogenation of 3-nitrostyrene. TiO2 supports were calcined under air, hydrogen and nitrogen atmosphere at various temperatures around 600 to 900°C for 5 hours. In order to investigate characteristic and catalytic properties of TiO2 after treatment, treated-TiO2 were analyzed by using X-ray diffraction (XRD), N2-physisorption, X-ray photoelectron spectroscopy (XPS), UV-Vis spectroscopy (UV-Vis), photoluminescence spectroscopy (PL), thermogravimetric analysis (TGA), scanning electron microscope (SEM). Photocatalytic hydrogenation performance of treated-TiO2 were tested under UV light irradiation. The 3-nitrostyrene consumption was linearly related to the photoluminescence …

Go to article

Synthesis Of Black Titanium Dioxide And Effect Of Calcination Conditions And Reducing Agent On Photocatalytic Degradation Of Methyl Orange, Saran Saensook Jan 2018

Synthesis Of Black Titanium Dioxide And Effect Of Calcination Conditions And Reducing Agent On Photocatalytic Degradation Of Methyl Orange, Saran Saensook

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research studied the synthesis and application of black titanium dioxide in the photocatalytic degradation of methyl orange (MO). First, titanium dioxide was prepared via a sol-gel method. Then sodium borohydride was used as the reducing agent in order to synthesize black titanium dioxide. Thus, a 2x2x3 factorial experimental design was employed to assess the significance of the following three factors: (A) calcination temperature (400 and 500 °C); (B) calcination time (5 and 10 h); and (C) the molar ratio of NaBH4 to TiO2 used (0:1, 0.5:1, and 1:1). The removal of MO under UV and visible light were the …

Go to article

The Effect Of Mcm-41 Addition To Pva/Pan/Pvp Polymer Electrolyte For Zinc-Air Batteries, Sirinuch Nanthapong Jan 2018

The Effect Of Mcm-41 Addition To Pva/Pan/Pvp Polymer Electrolyte For Zinc-Air Batteries, Sirinuch Nanthapong

Chulalongkorn University Theses and Dissertations (Chula ETD)

A membrane separator is one of the main components in zinc-air batteries playing an important role in controlling the mass transfer for the electrochemical reaction in the battery which determines the battery performance. This work aimed to develop a new membrane separator for the zinc-air battery. Polyvinyl alcohol (PVA), polyacrylonitrile (PAN), polyvinylpyrrolidone (PVP), and their blends were used for the fabrication of separator in this work. In addition, an inorganic nanoparticle with high hydroxide content such as MCM-41 was also applied as the filler for the polymers. The results revealed that the addition of PAN in PVA enhanced the electrolyte …

Go to article

Application Of Amine-Functionalized Titanium Dioxide Wrapped In Reduced Graphene Oxide In Photocatalytic Degradation Of Methylene Blue, Sirinya Kanjanapanasont Jan 2018

Application Of Amine-Functionalized Titanium Dioxide Wrapped In Reduced Graphene Oxide In Photocatalytic Degradation Of Methylene Blue, Sirinya Kanjanapanasont

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research investigated the effect of reduced graphene oxide (rGO) addition to amine-functionalized titanium dioxide (APTMS-TiO2). The loading amount of rGO was varied from 0 to 0.05 %wt. Also, the effect of the amount of 3-aminopropyltrimethoxysilane (APTMS) was studied. To synthesize TiO2/rGO catalysts, the amount of APTMS was varied at 2.21 and 22.1 mmol. TiO2 catalyst was synthesized via a sol-gel method. Next, the surface of TiO2 was modified with APTMS by refluxing. Then graphene oxide was wrapped around APTMS-TiO2 and was reduced to rGO using hydrazine and ammonia. In the experiment, the catalyst was dispersed in methylene blue solution …

Go to article

Effect Of Ceo2 And La2o3 Promoters On Ni/Al2o3 Oxygen Carrier Performance In Chemical Looping Steam Reforming Of Ethanol For Hydrogen Production, Supalak Isarapakdeetham Jan 2018

Effect Of Ceo2 And La2o3 Promoters On Ni/Al2o3 Oxygen Carrier Performance In Chemical Looping Steam Reforming Of Ethanol For Hydrogen Production, Supalak Isarapakdeetham

Chulalongkorn University Theses and Dissertations (Chula ETD)

The effects of Ce and/or La on NiO/Al2O3 were studied in chemical looping steam reforming of ethanol. Oxygen carriers (OCs) were prepared by wet impregnation method and characterized by various techniques. The redox test was performed by alternating between fuel feed (FFS) and air feed step (AFS) at 500oC. It was found that Ce- and La-doped improved the OCs' properties. A suitable amount of Ce- and La-doping helped increase carbon tolerance due to oxygen storage capacity and mobility. The solubility limit was found at 50 mol% La in solid solution. At higher La-doping, La2O3 dispersed on the surface and adsorbed …

Go to article

Design And Performance Evaluation Of Integrated System Of Hydrotreating And Hydrogen Generation For Bio-Hydrogenated Diesel Fuel Production From Palm Oil, Siriporn Boonsuk Jan 2018

Design And Performance Evaluation Of Integrated System Of Hydrotreating And Hydrogen Generation For Bio-Hydrogenated Diesel Fuel Production From Palm Oil, Siriporn Boonsuk

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research studied the simulations of the integrated systems between of hydrotreating and hydrogen generation with various selectivity of deoxygenation (DO) pathways (i.e. decarboxylation (DCO2), hydrodecarbonylation (HDCO), and hydrodeoxygenation (HDO)). Two integrated systems were proposed i.e. 1) integrated system between single-step hydrotreating and propane steam reforming (as called "single-step integrated system") and 2) integrated system between two-step hydrotreating (hydrolysis+DO) and glycerol steam reforming (as called "two-step integrated system"). Results revealed that, among DO pathways, DCO2 exhibited the lowest total minimum energy requirement (total MER) and the highest total efficiency for both integrated systems mainly due to lower electricity requirement to …

Go to article

Improving The Efficiency Of Dye-Sensitized Solar Cells With Ultrasonic Spray-Coated Tio2 Electrode That Was Modified By Mno2, Coo, Or Sno2, Supasun Thanadvanichkul Jan 2018

Improving The Efficiency Of Dye-Sensitized Solar Cells With Ultrasonic Spray-Coated Tio2 Electrode That Was Modified By Mno2, Coo, Or Sno2, Supasun Thanadvanichkul

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research investigated the modification of TiO2 electrode by adding the second metal oxide, namely, manganese dioxide (MnO2), cobalt oxide (CoO), or tin dioxide (SnO2) use in for dye-sensitized solar cell (DSSCs). TiO2 and modified TiO2 sols were synthesized via sol-gel methods. The sols were sprayed 500 times onto the fluorine-doped tin oxide glass substrates as a thin film using an ultrasonic spray coater. Finally, the thin film electrode was calcined at 400ºC for two hours. The amount of MnO2, CoO, or SnO2 was varied at 0, 0.1, 0.5, 1.0, and 3.0%wt. The photovoltaic efficiency of DSSCs was measured using …

Go to article

Preliminary Study On Synthesis And Characterization Of The Star-Shaped Poly (Ethylene Glycol) Through Polycondensation Reaction, Tanchanok Wongkhan Jan 2018

Preliminary Study On Synthesis And Characterization Of The Star-Shaped Poly (Ethylene Glycol) Through Polycondensation Reaction, Tanchanok Wongkhan

Chulalongkorn University Theses and Dissertations (Chula ETD)

The synthesis of star-shaped poly(ethylene glycol) was synthesized from pentetic acid (PA) and poly(ethylene glycol) (PEG) by polycondensation reaction in order to solve the problem of the melt strength of the molten polymer of poly(lactic acid). In this study, the star-shaped poly(ethylene glycol) were synthesized with a different molecular weight of neat poly(ethylene glycol) of 200, 400 and 600 g/mol. After that, the chemical structure of product-PEG was investigated by FTIR and NMR techniques. FTIR spectra of the product-PEG exhibited carbonyl peak due to the reaction between hydroxyl groups of PEG and carboxyl groups of PA. The NMR spectra of …

Go to article

Lactic Acid Production From Glucose By Using Divalent Transition Metal Oxide Catalyst On Magnesium Oxide Support Without Alkaline Solution, Tanyatorn Udomcharoensab Jan 2018

Lactic Acid Production From Glucose By Using Divalent Transition Metal Oxide Catalyst On Magnesium Oxide Support Without Alkaline Solution, Tanyatorn Udomcharoensab

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research was studied the effects of the type of divalent metal oxide (Cu, Co, Ni, and Zn) supported on magnesium oxide catalyst using the hexadecyltrimethylammonium bromide (CTAB) as the capping agent with metal loading at 1.5, 5, and 10 mmol/gram-catalyst on lactic acid production from glucose. To achieve the lactic acid production of lower reactor corrosion rate and being environmentally friendly, the reaction was performed in an alkali additive-free environment. The catalysts were synthesized by hydrothermal method and characterized by various techniques. The XRD pattern of spent CuCTAB/MgO and CoCTAB/MgO catalyst showed the reduced metal species indicated the used …

Go to article

Effect Of Tio2 Polymorphs And Crystallite Size On The Catalytic Properties Of Pt/Tio2 In The Selective Hydrogenation Of Furfural To Furfuryl Alcohol, Thunyaporn Kaewla-Ueat Jan 2018

Effect Of Tio2 Polymorphs And Crystallite Size On The Catalytic Properties Of Pt/Tio2 In The Selective Hydrogenation Of Furfural To Furfuryl Alcohol, Thunyaporn Kaewla-Ueat

Chulalongkorn University Theses and Dissertations (Chula ETD)

Furfuryl alcohol (FA) is an important intermediate for the manufacturing of many fine chemical products such as furan, resin, vitamin C, and lysine. In this research, the selective hydrogenation of furfural to FA was carried out in a batch reactor at 50ºC, 20 bar H2 and 2 h reaction time using Pt (0.5 wt. %) on TiO2 support. The Pt/TiO2 catalysts were prepared by the incipient wetness impregnation on different commercial TiO2 polymorphs and different temperatures calcined TiO2 sol-gel. Among the commercially available TiO2, it was found that Pt supported on P25 exhibited the highest furfural conversion and selectivity of …

Go to article

Analysis Of Cracked Body Repaired By Adhesively Bonded Patches By Bem-Fem Coupling, Binh Viet Pham Jan 2018

Analysis Of Cracked Body Repaired By Adhesively Bonded Patches By Bem-Fem Coupling, Binh Viet Pham

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis presents an efficient numerical technique capable of handling the stress analysis of three-dimensional cracked bodies strengthened or repaired by adhesively bonded patches. The proposed technique is implemented within the framework of the coupling of the weakly singular boundary integral equation method and the standard finite element procedure. The former is applied to efficiently treat the elastic body containing cracks whereas the latter is adopted to handle both the adhesive layers and the patches. The approximation of the near-front relative crack-face displacement is enhanced by using local interpolation functions that can capture the right asymptotic behaviour. This also offers …

Go to article

The Relationship Of Influential Factors On Material Management Effectiveness In Building Construction Projects: Case Study In Vietnam, Bao Van Pham Jan 2018

The Relationship Of Influential Factors On Material Management Effectiveness In Building Construction Projects: Case Study In Vietnam, Bao Van Pham

Chulalongkorn University Theses and Dissertations (Chula ETD)

The improvement of management processes in construction could be seen as one of the important keys to project success in which material management should be appropriately taken into consideration. Although many previous research studies have examined the components of construction material management, the relationship of factors influencing material management effectiveness has not been explored. This study was carried out to identify influential factors on material management effectiveness and develop a model to explain the relationships between these factors and the effectiveness of material management based on practical projects. The research method included the collection of contractors' opinions in building projects …

Go to article

Sbfe Analysis Of Layered Elastic Media With Consideration Of Surface Energy Effect, Chantha Chhuon Jan 2018

Sbfe Analysis Of Layered Elastic Media With Consideration Of Surface Energy Effect, Chantha Chhuon

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis presents an efficient and accurate numerical technique for determining mechanical response of a two-dimensional, infinite, elastic, layered medium under arbitrary surface loading and surface stress effects. Governing equations of a generic bulk layer are formulated from the classical linear elasticity theory via a SBFE technique whereas those of the generic material surface are obtained from a full version of Gurtin-Murdoch surface elasticity theory. The formulation is established sufficiently general allowing both homogenous and functionally graded bulk materials to be treated for each layer. By enforcing the continuity at the interface of the material surface and the bulk, it …

Go to article

Compression Behavior Of Fire-Damaged Concrete-Filled Steel Tubular Columns Confined With Fiber-Reinforced Polymer Sheets, Dat Thanh Vu Jan 2018

Compression Behavior Of Fire-Damaged Concrete-Filled Steel Tubular Columns Confined With Fiber-Reinforced Polymer Sheets, Dat Thanh Vu

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research investigates the axial compression behavior of fire-damaged circular concrete-filled steel tube (CFST) stub columns externally confined with fiber-reinforced polymer (FRP) sheets. A total of 38 CFST specimens were tested under axial compression to investigate the load capacity, ductility, stiffness and failure mode of fire-damaged CFST columns before and after strengthening with FRP sheets. The test variables include the level of fire damage (no damage and 2-hour ISO standard fire), compressive strength of infill concrete (24MPa and 55MPa), type of FRP sheets (carbon and glass), and the number of FRP layers (0, 1, and 2 layers). The test results …

Go to article

A Bim-Database-Integrated System For Evaluating Building Life-Cycle Costs Using A Multi-Parametric Model, Hang Thi Thu Le Jan 2018

A Bim-Database-Integrated System For Evaluating Building Life-Cycle Costs Using A Multi-Parametric Model, Hang Thi Thu Le

Chulalongkorn University Theses and Dissertations (Chula ETD)

Life-cycle cost analysis (LCCA) has become an essential requirement of the sustainable procurement for many construction projects. Conventional building LCCA methods are extremely complex and time-consuming due to repetitive works, numerous required data, scattered data inputs, and various regulatory requirements, which subsequently lead to inaccurate building life-cycle costs (LCC). Building information modeling (BIM) offers a revolutionary information technology, which can overcome the asperities of the conventional building LCCA. This research develops the BIM-database-integrated system for evaluating building life-cycle costs using a multi-parametric model (BIM-BLCC). The BIM-BLCC consists of four interrelated modules. The relational database management module collects and organizes the …

Go to article

Improved Response Spectrum Analysis Procedure For Design Of Reinforced Concrete Tall Buildings, Kimleng Khy Jan 2018

Improved Response Spectrum Analysis Procedure For Design Of Reinforced Concrete Tall Buildings, Kimleng Khy

Chulalongkorn University Theses and Dissertations (Chula ETD)

Response spectrum analysis (RSA) procedure commonly used in design practice has been found to underestimate design forces in tall buildings. Failure and damage of reinforced concrete (RC) shear walls in mid-rise and high-rise buildings have been observed in recent earthquakes. In this dissertation, a modified RSA (MRSA) procedure to compute shear forces and strains in RC walls and columns to identify locations requiring ductile detailing was proposed. Six tall RC shear-wall buildings of 15 to 39 stories and four RC moment-frame buildings of 3 to 15 stories subjected to earthquake ground motions expected in Bangkok and Chiang Mai were first …

Go to article

Development Of Causal Relationship Model Of Knowledge Sharing In Construction Projects, Lambada Roeun Jan 2018

Development Of Causal Relationship Model Of Knowledge Sharing In Construction Projects, Lambada Roeun

Chulalongkorn University Theses and Dissertations (Chula ETD)

Knowledge sharing among construction project members is very crucial for improving project success and project performance. It can also reduce mistakes in the construction process. Project management has been growing more complicated, and project members need to learn best practice from others. Currently, knowledge sharing is not well performed yet; especially, few research studies have been focused on the relationship evaluation of supporting factors that affect knowledge sharing from different contexts in construction projects. Therefore, this study aims to develop the causal relationship model of supporting factors from psychological, individual, organizational, and technological factors that affect mediators - knowledge sharing …

Go to article

The Influences Of Granite Particle As A Mixing Material Of High-Strength Concrete, May Thazin Khine Jan 2018

The Influences Of Granite Particle As A Mixing Material Of High-Strength Concrete, May Thazin Khine

Chulalongkorn University Theses and Dissertations (Chula ETD)

The aim of this study is to investigate the effect of granite particle on the properties of high strength concrete by the partial substitution as fine aggregate. By grouping two categories as concrete with and without admixture is also performed in this experiment. The granite particle substitution percentage for concrete with admixture is set with 0%, 20%, 30%, 40% and 50% by weight of fine aggregate and 0%, 10%, 15% and 20% by weight of fine aggregate for concrete without admixture. The testing of concrete strength is conducted with compressive, split tensile, flexural, water permeability, and microstructure. The result shows …

Go to article

Geophysical Site Investigation And Ground Response Analysis Of Bangkok Subsoil Due To Earthquake, Muhammad Fatih Qodri Jan 2018

Geophysical Site Investigation And Ground Response Analysis Of Bangkok Subsoil Due To Earthquake, Muhammad Fatih Qodri

Chulalongkorn University Theses and Dissertations (Chula ETD)

The potential damages on building and infrastructure could be affected by long-distance earthquakes since the vibrations can appear ground motion amplification during the wave propagation. Bangkok urban area is located a hundred kilometers away from the potential area of the earthquake epicenter. However, some people in Bangkok could feel the shaking during the earthquake. It indicates that the long-period shaking could happen during the earthquake. In line with this phenomenon, this study aims to interpret the amplification effect and spectral acceleration in the local site of Bangkok due to remoted earthquakes. The microtremor measurement was conducted at four locations in …

Go to article

Nonlinear Finite Element Analysis Of Steel Pipe With Stiffener Plate, Rut Su Jan 2018

Nonlinear Finite Element Analysis Of Steel Pipe With Stiffener Plate, Rut Su

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis presents the numerical studies of steel hollow section columns connected to corbels under industry crane loads, and the stiffening design using steel plates to enhance the maximum loading capacity against premature local buckling failures. The influences of inelastic material properties and geometry nonlinearity on the overall load carrying capacity of the columns were considered. Square hollow section columns were modelled in 3D using standard eight-node solid finite elements using an ANSYS software. The plate stiffener design algorithm involving variation of plate thicknesses was coded in MATLAB with a direct application programming interface to ANSYS. The full history of …

Go to article

Mechanical Performances Of Concrete Beams With Hybrid Usage Of Steel And Frp Reinforcement, Linh Van Hong Bui Jan 2018

Mechanical Performances Of Concrete Beams With Hybrid Usage Of Steel And Frp Reinforcement, Linh Van Hong Bui

Chulalongkorn University Theses and Dissertations (Chula ETD)

Fiber-reinforced polymer (FRP) bars have been recently employed to reinforce concrete members due to their high tensile strength and especially in corrosive environments to improve the durability of concrete structures. However, FRP composites have a low modulus of elasticity and a linear elastic behavior up to rupture, thus reinforced concrete (RC) components with such materials would express a lack of ductility. In order to increase the mechanical performances of RC beams, the hybrid usage (also called combined usage) of FRP and steel reinforcements in shear and flexure is proposed. At first, an experimental investigation of concrete beams strengthened in shear …

Go to article

Strengthening Of Shear Critical Reinforced Concrete Columns By Steel-Rod Collars, Phawe Suit Theint Jan 2018

Strengthening Of Shear Critical Reinforced Concrete Columns By Steel-Rod Collars, Phawe Suit Theint

Chulalongkorn University Theses and Dissertations (Chula ETD)

The inadequate shear strength of the existing old reinforced concrete columns located in the seismically active areas can lead the catastrophic shear failure. In this study, strengthening of shear-critical reinforced concrete columns by the steel-rod collar method is investigated. This proposed method is less intrusive to the existing building components. The steel-rod collar comprises the four sets of welded steel angles connected by steel-rods threaded at the ends. The three specimens were divided into one unstrengthened column, and the two strengthened columns. All the specimens were tested under the constant axial load and the reversed cyclic loadings. In addition, the …

Go to article

First Prev Next Last