Engineering Commons^™

Fossil Fuel Impact Of Buildings Electrification In New York City, Mattia Sartori

Dissertations and Theses

New York City's commitment to reduce Greenhouse Gases (GHG) emissions 80% by 2050 (80X50) requires a deep citywide conversion from fuel combustion systems to more efficient technologies, such as air-source heat pumps. Moreover, this challenging goal relies also on a much cleaner grid with the majority of electrical generation being provided by renewable sources, such as solar and wind. In this regard, building electrification is being considered as a possible solution in order to reduce emissions and maximize the efficiency of the energy utilization as well as improve the comfort of the indoor environment.

Under the assumption of a cleaner …

Developing A Recurrent Neural Network With High Accuracy For Binary Sentiment Analysis, Kevin Cunanan

CMC Senior Theses

Sentiment analysis has taken on various machine learning approaches in order to optimize accuracy, precision, and recall. However, Long Short-Term Memory (LSTM) Recurrent Neural Networks (RNNs) account for the context of a sentence by using previous predictions as additional input for future sentence predictions. Our approach focused on developing an LSTM RNN that could perform binary sentiment analysis for positively and negatively labeled sentences. In collaboration with Mariam Salloum, I developed a collection of programs to classify individual sentences as either positive or negative. This paper additionally looks into machine learning, neural networks, data preprocessing, implementation, and resulting comparisons.

The Need For Enhanced Physical Infrastructure In The United States, Tanvi Gandham

CMC Senior Theses

An examination of necessary infrastructure improvements in the United States.

Categorical Range Reporting In 2d Using Wavelet Tree, Swathi Kanthareddy Sumithra

Electronic Theses and Dissertations

The research involved optimizing the space and bounding the output time by the output size in categorical range reporting of points within the given rectangle query Q in two dimension using wavelet trees and range counting. The time taken to report those points and space to tore n points in set S can be done using wavelet tree and range counting. Consider set S consisting of n points in two-dimension. An orthogonal range reporting query rectangle Q = [a,b] x [c,d] on set S is sent to report the set of points in S which interacts with the query rectangle[Q]. …

Characterization Of Acoustic Modes In Aeroengines, Michelle Otero

Electronic Theses and Dissertations

Acoustic instabilities remain a key design concern faced in the development of liquid rocket engines. The interaction between the acoustic modes and the occurring combustion reactions can be detrimental to the engine. The fluctuating pressure waves resulting from the flame oscillations in the system can potentially lead to engine failure. For this reason, research in acoustic instabilities and methods to minimize the influences on the engine, has maintain interest in the aerospace community. The scope of this study was to design, optimize and characterize acoustic behaviors of a scaled rocket combustion chamber simulating acoustic pressure waves. Tangential and longitudinal acoustic …

Econometric Modeling Analysis Of Public Transit Ridership: Application For Orlando Region, Moshiur Rahman

Electronic Theses and Dissertations

Policy makers are considering several alternatives to counter the negative externalities of personal vehicle dependence. Towards this end, public transit investments are critical in growing urban regions such as Orlando, Florida. Transit system managers and planners mostly rely on statistical models to identify the factors that affect ridership as well as quantifying the magnitude of the impact on the society. These models provide vital feedback to agencies on the benefits of public transit investments which in turn act as lessons to improve the investment process. We contribute to public transit literature by addressing several methodological challenges for transit ridership modeling. …

The Effects Of Emerging Technology On Healthcare And The Difficulties Of Integration, Skyler J. Pavlish-Carpenter

Honors Undergraduate Theses

Background: Disruptive technology describes technology that is significantly more advanced than previous iterations, such as: 3D printing, genetic manipulation, stem cell research, innovative surgical procedures, and computer-based charting software. These technologies often require extensive overhauls to implement into older systems and must overcome many difficult financial and societal complications before they can be widely used. In a field like healthcare that makes frequent advancements, these difficulties can mean that the technology will not be utilized to its full potential or implemented at all.

Objective: To determine the inhibiting factors that prevent disruptive technology from being implemented in conventional healthcare.

Methods: …

Synthesis And Behavior Characterization Of Multi-Scale Hierarchical Structured Composites, Jacob M. Mayfield

College of Graduate Studies: Theses & Dissertations

The purpose of the synthesis of a multi-scale hierarchical composite material was to create a material with a high specific strength, a low mass, and high strength material. To achieve this the material categorization of the Formlabs Tough V2 resin was conducted. The resin was used in the construction of a bio-mimicry diamond lattice structure. The structure was subjected to compression testing to characterize the material properties. The Tough V2 resin structure combined with cellulose created a multi-scaled material on Macro and Micro levels to show the bio-inspired design to increase the material properties in a favorable manor. The Tough …

Structural And Aerodynamic Design, Procedure And Analysis Of A Small V-Shaped Vertical Axis Wind Turbine, Odari J. Whyte

College of Graduate Studies: Theses & Dissertations

Over the last two decades there has been a renewed interest in Vertical Axis Wind Turbines. This turbine configuration though unpopular for large-scale generation has found a niche market in the way of offshore energy harvesting. However, offshore wind has its challenges. In this thesis a detailed comprehensive study of a proposed V-shaped vertical axis turbine rotor is performed in order to examine its structural and aerodynamic characteristics. The design met and exceeded the safety parameters establish for test bed operation, showing a factor of safety of 1.87 with regard to fatigue stress response. A satisfactory fatigue stress design life …

Program And Proceedings: Nebraska Academy Of Sciences 1880–2018, 138th Anniversary Year, One Hundred-Twenty-Eighth Annual Meeting

Nebraska Academy of Sciences: Programs and Proceedings

Program

Aeronautics and Space Science

Collegiate Academy: Biology

Biological and Medical Sciences

Chemistry and Physics>/p>

Collegiate Academy: Chemistry and Physics

Learn to Print 3-D Models for Your Classroom Workshop

Aeronautics and Space Science Poster Session

Maiben Memorial Lecture: Thomas Clemente

Anthropology

Applied Science and Technology

Earth Science

Environmental Sciences

Teaching of Science and Mathematics

Friend of Science Award: Mary Kalen Romjue and Michael Sibbernsen

Toward Biologically-Inspired Self-Healing, Resilient Architectures For Digital Instrumentation And Control Systems And Embedded Devices, Shawkat Sabah Khairullah

Theses and Dissertations

Digital Instrumentation and Control (I&C) systems in safety-related applications of next generation industrial automation systems require high levels of resilience against different fault classes. One of the more essential concepts for achieving this goal is the notion of resilient and survivable digital I&C systems. In recent years, self-healing concepts based on biological physiology have received attention for the design of robust digital systems. However, many of these approaches have not been architected from the outset with safety in mind, nor have they been targeted for the automation community where a significant need exists. This dissertation presents a new self-healing digital …

Innovative Fuel Design To Improve Proliferation Management, Taylor C. Britt

Theses and Dissertations

This research uses an existing innovative fuel design (IFD) that has intrinsic safety features and enhanced economics over the current uranium dioxide (UO₂) light water fuel design and evaluates promising methods to improve the waste management and proliferation resistance of the IFD by doping the fresh fuel with select actinides.The most robust approach for proliferation resistance is to denature these materials by adding a uranium or plutonium isotope that hampers the usability of the materials in weapons. The proposed modifications to the IFD use this approach through elevated fractions of ²³⁸Pu. ²³⁸Pu generates large quantities of …

Managing Io Resource For Co-Running Data Intensive Applications In Virtual Clusters, Dan Huang

Electronic Theses and Dissertations

Today Big Data computer platforms employ resource management systems such as Yarn, Torque, Mesos, and Google Borg to enable sharing the physical computing among many users or applications. Given virtualization and resource management systems, users are able to launch their applications on the same node with low mutual interference and management overhead on CPU and memory. However, there are still challenges to be addressed before these systems can be fully adopted to manage the IO resources in Big Data File Systems (BDFS) and shared network facilities. In this study, we mainly study on three IO management problems systematically, in terms …

A Joint Econometric Approach For Modeling Crash Counts By Collision Type, Tanmoy Bhowmik

Electronic Theses and Dissertations

In recent years, there is growing recognition that common unobserved factors that influence crash frequency by one attribute level are also likely to influence crash frequency by other attribute levels. The most common approach employed to address the potential unobserved heterogeneity in safety literature is the development of multivariate crash frequency models. The current study proposes an alternative joint econometric framework to accommodate for the presence of unobserved heterogeneity – referred to as joint negative binomial-multinomial logit fractional split (NB-MNLFS) model. Furthermore, the study undertakes a first of its kind comparison exercise between the most commonly used multivariate model (multivariate …

Evaluating The Integration Of Chlorine Dioxide Into A Coagulation, Sedimentation, And Filtration Process Treating Surface Water, Martin Coleman

Electronic Theses and Dissertations

Methods of optimizing the coagulation, flocculation, sedimentation, and filtration (CSF) process at a conventional surface water treatment plant (WTP) were conducted to investigate opportunities for the reduction of disinfection by-product (DBP) precursor material. The research had two primary components: (1) optimize coagulant dosage and associated operating pH and (2) investigate pretreatment oxidation with chlorine dioxide (ClO2) and potassium permanganate (KMnO4). To accomplish the first component, jar tests were conducted at various pH and aluminum sulfate (alum) dosages to model current and potential treatment conditions during the CSF process at a WTP. Isopleths were developed to examine the removal efficiencies of …

Harmful Algal Bloom Mitigating Using Recycled Concrete Aggregate Coated With Fixed-Quat., Ikenna Ezeodurukwe

Electronic Theses and Dissertations

Human activities generate surplus nutrients which may lead to algal bloom events in water resources along with serious ecological problems and thus substantial economic losses. Particularly, harmful algal blooms (HABs) represent toxic cyanobacterial blooms which produce cyanotoxins. The primary concerns of HABs are the exposures to a wide variety of cyanotoxins via ingestion of contaminated drinking water, inhalation during recreational activities, and consumption of contaminated fish and shellfish. However, conventional physical and chemical methods are not always possible to efficiently handle these HABs events. It is urgent to develop viable and rapid solutions to control HABs in field and mitigate …

Understanding How, Where And How Much Freight Flows Using 2012 Commodity Flow Survey Data, Nowreen Keya

Electronic Theses and Dissertations

In recent years, with increased economic globalization, growing e-commerce and internet based shopping, freight movement patterns are undergoing a transformative change. The shipment size distribution is moving towards a higher share of smaller size shipments affecting transportation mode and vehicle type requirements. In addition, freight transportation mode is closely affected by the destination location (and its attributes). In our dissertation, we contribute to freight research by developing a comprehensive framework to examine the how, where and how much freight flows in US. Specifically, we study the following dimensions of freight flow: (1) transportation mode, (2) mode and shipment weight choice …

Development Of An Mrm Federation System Using Cots Simulations, Jaeho Kim

Electronic Theses and Dissertations

The goal of this research is to build an experimental environment for the Simulation Interoperability Laboratory (SIL) of the University of Central Florida (UCF). The Simulation Interoperability Laboratory (SIL) is researching about multi-resolution modeling(MRM), with a focus on military field uses. This thesis proposes steps to develop an MRM federation system and build two different MRM systems using COTS simulations (SIMBox, VR-Forces, and MASA Sword). This report is written to provide the basis for a time-based MRM federation study in the Simulation Interoperability Laboratory. The report describes many definitions and notions related to Multi-Resolution Modeling(MRM) and discusses examples to make …

Experimental Investigation Of Advanced Ignition Systems For High Efficiency Combustion, Bader Almansour

Electronic Theses and Dissertations

Consumption of fossil and bio-derived fuels is growing due to energy demands associated with increase in population and standard of living across the globe. Power generation and transportation sectors are the primary two sources of fuel consumption, which have raised the demand for crude oil and led to serious environmental pollution issues. This demand for energy forced various government agencies to strengthen the allowable exhaust pollutant concentration limits. Recently, CO, CO2, particulate matter, and nitrogen oxides (NOx) emission restrictions have become more stringent to the extent that engines must operate at higher energy densities and efficiencies. Towards this goal, this …

Treatment Of Leachate Organic Matter Through Sunlight Driven Processes, Duncan Lozinski

Electronic Theses and Dissertations

The ability to manage leachate during post-closure care (PCC) of a landfill may be increasingly difficult as leachate organic matter (LOM) becomes recalcitrant when a landfill ages, requiring advanced and costly treatment technologies. This research investigated the ability to treat LOM through sunlight driven processes, with a focus on photolysis, to provide insight to landfill owners and operators on the potential of wetlands treatment as a means for reducing long-term risks and costs associated with leachate treatment during PCC. The study was completed in eight batch tests, where leachate was exposed to natural sunlight in central Florida for a period …

Affordable Small System Calibration & Tvac Testing, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Ensure that your sensor will perform correctly during operation by validating image quality, radiometric performance, and operation temperature performance!

The Space Dynamics Laboratory (SDL) has been calibrating electro-optical sensors for over 50 years. During this time, SDL has designed and developed a collection of specialized equipment that is available for calibrating smaller optical systems, which can be very affordable.

Radial And Longitudinal Motion Of The Arterial Wall: Their Relation To Pulsatile Pressure And Flow In The Artery, Dan Wang, Linda Vahala, Zhili Hao

Mechanical & Aerospace Engineering Faculty Publications

The aim of this paper is to analyze the radial and longitudinal motion of the arterial wall in the context of pulsatile pressure and flow, and to understand their physiological implications for the cardiovascular system. A reexamination of the well-established one-dimensional governing equations for axial blood flow in the artery and the constitutive equation for the radial dilation of the arterial wall shows that two waves—a pulsatile pressure wave in the artery and a radial displacement wave in the arterial wall—propagate simultaneously along the arterial tree with the same propagation velocity, explaining why this velocity combines the physical properties and …

Neowise: Near Earth Object Wide-Field Infrared Survey Explorer, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

NEOWISE began as the Wide-field Survey Explorer (WISE), a highly sensitive astronomical telescope that surveyed the entire sky in four mid‐infrared bands spanning from 2.6 to 26 microns. Launched in December 2009, WISE scanned the entire sky one and a half times and cataloged hundreds of millions of astronomical objects, including many asteroids, brown dwarf stars, and ultra‐ luminous infrared galaxies.

Gr: Geospatial Reality, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

The Space Dynamics Laboratory developed Geospatial Reality (GR), a Government-owned, open software architecture that enhances military/DoD system capability by visually presenting warfighters with tactically relevant, geospatial situational awareness information in real time. GR is designed to facilitate both real-time Augmented Reality (AR) and Virtual Reality (VR) applications on a variety of systems. Most of the underlying software methods are typically the same for both AR and VR and often the location of the operator is the only difference between the two.

Analysis Of Aluminum-Air Battery By Physics-Based Mathematical Model, Chong Zhou

Graduate Research Theses & Dissertations

The demand of electrical energy system is increasing rapidly these days for diverse applications from portable electronics and electrical vehicles to grid-scale energy storage. Lithium-ion battery has been utilized for most of those applications, but due to high cost (about $600/ kWh) and lower energy density (0.37 kWh/kg), the advent of low cost and high performing battery system is required. In this study, we will revisit aluminum-air battery as a promising system which has excellent features such as high energy density of 2.8 kWh/kg, low cost, and safe in nature, but it was abandoned due to challenging issues. One of …

3d Global Acceleration Estimation Using Inertial Measurement Unit For Biomechanical Research, Revanth Raghuram Konda

Graduate Research Theses & Dissertations

The effects of mechanical vibrations on the body of a driver in off-road vehicles such as mining vehicles have become one of the intriguing research topics. To reduce the injuries of the operator of an off-road vehicle where vibrations of high magnitude occur, an indepth study of the nature of these vibrations must be done. The first step towards this objective is the correct estimation of acceleration of the vehicle by taking into consideration all the translational and rotational motion. The main goal of this study is the estimation of acceleration of an off-road vehicle in 3D space using an …

Surface Modification Of Titanium For Hard-Tissue Engineering Applications, Murali Krishna Duvvuru

Graduate Research Theses & Dissertations

Titanium (Ti) and its alloys are widely used in dental and orthopedic applications due to their advantages such as biocompatibility, excellent corrosion resistance and mechanical properties like low Young’s modulus, low density and high strength as compared to other metallic implants. However, lack of interaction with host tissue (e.g. bioinertness), higher modulus of elasticity as compared to that of bone and resultant stress shielding cause fibrous tissue formation around the implant where the interaction with tissue is minimized. These will eventually cause the implant loosening and revision surgery is needed. Surface modification of Ti by increasing surface roughness and/or incorporation …

Efficient Implementation Of Ieee 802.11i Wi-Fi Security (Wpa2-Psk) Standard Using Fpga, Atal Bajracharya

Masters Theses

The rationale behind the thesis was to design efficient implementations of cryptography algorithms used for Wi-Fi Security as per IEEE 802.11i Wi-Fi Security (WPA2-PSK) standard. The focus was on software implementation of Password-Based Key Derivation Function 2 (PBKDF2) using Keyed-Hash Message Authentication Code (HMAC)-SHA1, which is used for authentication, and, hardware implementation of AES-256 cipher, which is used for data confidentiality.

In this thesis, PBKDF2 based on HMAC-SHA1 was implemented on software using C programming language, and, AES-256 was implemented on hardware using Verilog HDL. The overall implementation was designed and tested on Nexys4 FPGA board. The performance of the …

Measuring The Influence Of Bedding On Soil Nitrogen Losses And Corn Crop Nitrogen Characteristics For Fall Applied Solid Beef Cattle Manure In Eastern South Dakota, Mukesh Mehata

Electronic Theses and Dissertations

Nitrogen (N) is a major component of chlorophyll which plays a key role in the photosynthesis process in crops. The N is one of the highest demanded nutrients by all plants for their growth and reproduction. Manure or inorganic fertilizer is often applied to fulfill the crops’ N demand. However, the applied N sources have the potential of N losses in different forms from the soil volume in many ways such as ammonia (NH₃) volatilization, aerial nitrous oxide (N₂O) loss, nitrate (NO₃ --N) leaching, and runoff and/or erosion. Soil fertility, crop yield, water quality, and …

Simulation Of An Ethylene Flame With Turbulence, Soot And Radiation Modeling, Santu Golder

Electronic Theses and Dissertations

This thesis will investigate soot models that are available in commercial codes. We will look at the effect of turbulence models, gravity, soot models and radiation. Simulations will be compared to Coppalle and Joyeux [1]. The flame is an ethylene air diffusion flame at a Reynolds number of 5700. Simulations show the SST turbulence model, one-step soot model and Rosseland radiation model including gravity agree well with experimental data (temperature and soot). Flamelet soot modeling from Carbonell et al. [2] and flamelet radiation modeling from Doom [3] has been incorporated and compared as well.