Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 7681 - 7710 of 8951

Full-Text Articles in Engineering

Effect Of Weld Nugget Size On Failure Mode And Mechanical Properties Of Microscale Resistance Spot Welds On Ti–1al–1mn Ultrathin Foils, Feng Chen, Shiding Sun, Zhenwu Ma, G Q. Tong, Xiang Huang Jan 2018

Effect Of Weld Nugget Size On Failure Mode And Mechanical Properties Of Microscale Resistance Spot Welds On Ti–1al–1mn Ultrathin Foils, Feng Chen, Shiding Sun, Zhenwu Ma, G Q. Tong, Xiang Huang

Department of Electrical and Computer Engineering: Faculty Publications

We use tensile–shear tests to investigate the failure modes of Ti–1Al–1Mn microscale resistance spot welds and to determine how the failure mode affects the microstructure, microhardness profile, and mechanical performance. Two different failure modes were revealed: interfacial failure mode and pullout failure mode. The welds that fail by pullout failure mode have much better mechanical properties than those that fail by interfacial failure mode. The results show that weld nugget size is also a principal factor that determines the failure mode of microscale resistance spot welds. A minimum weld nugget size exists above which all specimens fail by pullout failure …

Go to article

Metasurface Base On Uneven Layered Fractal Elements For Ultra-Wideband Rcs Reduction, Jianxun Su, Yueyang Cui, Zengrui Li, Yaoqing (Lamar) Yang, Yongxing Che, Hongcheng Yin Jan 2018

Metasurface Base On Uneven Layered Fractal Elements For Ultra-Wideband Rcs Reduction, Jianxun Su, Yueyang Cui, Zengrui Li, Yaoqing (Lamar) Yang, Yongxing Che, Hongcheng Yin

Department of Electrical and Computer Engineering: Faculty Publications

A novel metasurface based on uneven layered fractal elements is designed and fabricated for ultra-wideband radar cross section (RCS) reduction in this paper. The proposed metasurface consists of two fractal subwavelength elements with different layer thickness. The reflection phase difference of 180◦ (±37◦) between two unit cells covers an ultra-wide frequency range. Ultra-wideband RCS reduction results from the phase cancellation between two local waves produced by these two unit cells. The diffuse scattering of electromagnetic (EM) waves is caused by the randomized phase distribution, leading to a low monostatic and bistatic RCS simultaneously. This metasurface can achieve …

Go to article

Comparative Study On Various Dielectric Barriers And Their Effect On Breakdown Voltage, Elham Foruzan, Amir A. S. Akmal, Kaveh Niayesh, Jeremy Lin, Desh Deepak Sharma Jan 2018

Comparative Study On Various Dielectric Barriers And Their Effect On Breakdown Voltage, Elham Foruzan, Amir A. S. Akmal, Kaveh Niayesh, Jeremy Lin, Desh Deepak Sharma

Department of Electrical and Computer Engineering: Faculty Publications

Non-pressurised air is extensively used as basic insulation medium in high-voltage equipment. Unfortunately, an inherent property of air-insulated design is that the system tends to become physically large. On the other hand, the application of dielectric barriers can increase the breakdown voltage and therefore decrease the size of the equipment. In this study, the impact of dielectric barriers on breakdown voltage enhancement is investigated under both direct current (dc) and alternating current (ac) applied voltages. For this purpose, three kinds of dielectric barriers in two different high-voltage electrode structures are investigated. In the first structure, several experiments are carried out …

Go to article

Method Ofobtaining Micrographs Of Transparent Or Semi-Transparent Specimens Using Anisotropic Contrast, Tino Hofmann, Mathias M. Schubert, Tadas Kasputis, Angela K. Pannier, Craig M. Herzinger, John A. Woollam Jan 2018

Method Ofobtaining Micrographs Of Transparent Or Semi-Transparent Specimens Using Anisotropic Contrast, Tino Hofmann, Mathias M. Schubert, Tadas Kasputis, Angela K. Pannier, Craig M. Herzinger, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Anisotropic contrast methodology in combination with use of sample investigating polarized electromagnetic radiation to provide Jones or Mueller Matrix imaging data corresponding to areas on samples.

Go to article

Elevated Temperature Dependence Of The Anisotropic Visible-To-Ultraviolet Dielectric Function Of Monoclinic Β-Ga2o3, Alyssa Mock, Jeremy Vanderslice, Rafal Korlacki, John A. Woollam, Mathias Schubert Jan 2018

Elevated Temperature Dependence Of The Anisotropic Visible-To-Ultraviolet Dielectric Function Of Monoclinic Β-Ga2o3, Alyssa Mock, Jeremy Vanderslice, Rafal Korlacki, John A. Woollam, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

We report on the temperature dependence of the dielectric tensor elements of n-type conductive β-Ga2O3 from 22 °C to 550 °C in the spectral range of 1.5 eV–6.4 eV. We present the temperature dependence of the excitonic and band-to-band transition energy parameters using a previously described eigendielectric summation approach [A. Mock et al., Phys. Rev. B 96, 245205 (2017)]. We utilize a Bose-Einstein analysis of the temperature dependence of the observed transition energies and reveal electron coupling with average phonon temperature in excellent agreement with the average over all longitudinal phonon plasmon coupled modes reported previously [M. …

Go to article

Flow Patterns Through Vascular Graft Models With And Without Cuffs, Chia Min Leong, Gary B. Nackman, Timothy Wei Jan 2018

Flow Patterns Through Vascular Graft Models With And Without Cuffs, Chia Min Leong, Gary B. Nackman, Timothy Wei

Department of Mechanical and Materials Engineering: Faculty Publications

The shape of a bypass graft plays an important role on its efficacy. Here, we investigated flow through two vascular graft designs±with and without cuff at the anastomosis. We conducted Digital Particle Image Velocimetry (DPIV) measurements to obtain the flow field information through these vascular grafts. Two pulsatile flow waveforms corresponding to cardiac cycles during the rest and the excitation states, with 10% and without retrograde flow out the proximal end of the native artery were examined. In the absence of retrograde flow, the straight end-to-side graft showed recirculation and stagnation regions that lasted throughout the full cardiac cycle with …

Go to article

Dislocations Interaction Induced Structural Instability In Intermetallic Al2cu, Qing Zhou, Jian Wang, Amit Misra, Ping Huang, Fei Wang, Kewei Xu Jan 2018

Dislocations Interaction Induced Structural Instability In Intermetallic Al2cu, Qing Zhou, Jian Wang, Amit Misra, Ping Huang, Fei Wang, Kewei Xu

Department of Mechanical and Materials Engineering: Faculty Publications

Intermetallic precipitates are widely used to tailor mechanical properties of structural alloys but are often destabilized during plastic deformation. Using atomistic simulations, we elucidate structural instability mechanisms of intermetallic precipitates associated with dislocation motion in a model system of Al2Cu. Interaction of non-coplanar <001> dislocation dipoles during plastic deformation results in anomalous reactions—the creation of vacancies accompanied with climb and collective glide of <001> dislocation associated with the dislocation core change and atomic shuffle—accounting for structural instability in intermetallic Al2Cu. This process is profound with decreasing separation of non-coplanar dislocations and increasing temperature and is likely to be …

Go to article

Mechanical Performance Of Plla Stent, Longzhen Wang, Junfei Tong, Pengfei Dong, David L. Wilson, Hiram G. Bezerra, Linxia Gu Jan 2018

Mechanical Performance Of Plla Stent, Longzhen Wang, Junfei Tong, Pengfei Dong, David L. Wilson, Hiram G. Bezerra, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Stent implantation is widely used to treat blocked lumen. Stents were meshed structure made of polymers and metal alloys, including stainless steel, cobalt chrome and nitinol [1]. Clinical studies had demonstrated that stents helped to scaffold the diseased lesion up to one year when tissue adapted to the stented environment [2]. However, the permanently implanted stents inside artery were associated with complications such as stent fracture, tissue inflammation, in-stent restenosis and thrombosis [3]. Currently, biodegradable stents are attracting more attention due to its potential long-term efficacy in treating blocked lumens. The detailed characterizations of biodegradable stents are essential for the …

Go to article

Plaque Burden Influences Accurate Classification Of Fibrous Cap Atheroma By In-Vivo Optical Coherence Tomography In A Porcine Model Of Advanced Coronary Atherosclerosis., Christian B. Poulsen, Ryan M. Pedrigi, Nilesh Pareek, Ismail D. Kilic, Niels R. Holm, Jacob F. Bentzon, Hans Erik Botker, Erling Falk, Rob Krams, Ranil De Silva Jan 2018

Plaque Burden Influences Accurate Classification Of Fibrous Cap Atheroma By In-Vivo Optical Coherence Tomography In A Porcine Model Of Advanced Coronary Atherosclerosis., Christian B. Poulsen, Ryan M. Pedrigi, Nilesh Pareek, Ismail D. Kilic, Niels R. Holm, Jacob F. Bentzon, Hans Erik Botker, Erling Falk, Rob Krams, Ranil De Silva

Department of Mechanical and Materials Engineering: Faculty Publications

Advanced coronary atherosclerosis assessed by in-vivo optical coherence tomography (OCT) has not been directly compared with histology. In a porcine model with human-like coronary atherosclerosis we compared in-vivo OCT images with histology in five animals. We found a high sensitivity but modest specificity of OCT in classifying fibrous cap atheroma (FCA). The modest specificity was caused by misclassification of FCA lesions as pathological intimal thickening. The misclassification most frequently occurred when plaque burden exceeded ~20%. Compared with histology, OCT has high sensitivity but modest specificity for identifying FCA. The study suggests that plaque burden should be considered when interpreting OCT …

Go to article

Multifunctional Operational Component For Robotic Devices, Shane M. Farritor, Amy Lehman, Mark Rentschler Jan 2018

Multifunctional Operational Component For Robotic Devices, Shane M. Farritor, Amy Lehman, Mark Rentschler

Department of Mechanical and Materials Engineering: Faculty Publications

The various embodiments disclosed herein relate to modular medical devices, including various devices with detachable modular components and various devices with pivotally attached modular components. Additional embodiments relate to procedures in which various of the devices are used cooperatively. Certain embodiments of the medical devices are robotic in vivo devices.

Go to article

Scaffold Structural Microenvironmental Cues To Guide Tissue Regeneration In Bone Tissue Applications, Xuening Chen, Hongyuan Fan, Xiaowei Deng, Lina Wu, Tao Yi, Linxia Gu, Changchun Zhou, Yujiang Fan, Xingdong Zhang Jan 2018

Scaffold Structural Microenvironmental Cues To Guide Tissue Regeneration In Bone Tissue Applications, Xuening Chen, Hongyuan Fan, Xiaowei Deng, Lina Wu, Tao Yi, Linxia Gu, Changchun Zhou, Yujiang Fan, Xingdong Zhang

Department of Mechanical and Materials Engineering: Faculty Publications

In the process of bone regeneration, new bone formation is largely affected by physico-chemical cues in the surrounding microenvironment. Tissue cells reside in a complex scaffold physiological microenvironment. The scaffold should provide certain circumstance full of structural cues to enhance multipotent mesenchymal stem cell (MSC) differentiation, osteoblast growth, extracellular matrix (ECM) deposition, and subsequent new bone formation. This article reviewed advances in fabrication technology that enable the creation of biomaterials with well-defined pore structure and surface topography, which can be sensed by host tissue cells (esp., stem cells) and subsequently determine cell fates during differentiation. Three important cues, including scaffold …

Go to article

Heat Transfer Across A Nanoscale Pressurized Air Gap And Its Application In Magnetic Recording, Jinglin Zheng, Yung-Kan Chen, Qin Zhou Jan 2018

Heat Transfer Across A Nanoscale Pressurized Air Gap And Its Application In Magnetic Recording, Jinglin Zheng, Yung-Kan Chen, Qin Zhou

Department of Mechanical and Materials Engineering: Faculty Publications

In this study, we investigated how a thermally actuated air bearing slider heats up a fast-spinning storage disk through a highly pressurized nanoscale air gap in a magnetic recording system. A Euleriandescription- based computational approach is developed considering heat conduction through a pressurized air film and near-field radiation across the gap. A set of field equations that govern the air bearing dynamics, slider thermo-mechanics and disk heat dissipation are solved simultaneously through an iterative approach. A temperature field on the same order as the hot slider surface itself is found to be established in the disk. The effective local heat …

Go to article

Interfacial Characterization By Pull-Out Test Of Bamboo Fibers Embedded In Poly(Lactic Acid), Quentin Viel, Antonella Esposito, Jean-Marc Saiter, Carlo Santulli, Joseph A. Turner Jan 2018

Interfacial Characterization By Pull-Out Test Of Bamboo Fibers Embedded In Poly(Lactic Acid), Quentin Viel, Antonella Esposito, Jean-Marc Saiter, Carlo Santulli, Joseph A. Turner

Department of Mechanical and Materials Engineering: Faculty Publications

In this work, the apparent shear strength at the interface between a bamboo fiber and the surrounding poly(lactic acid) (PLA) matrix is quantified. A method for processing pull-out test samples within a controlled embedded length is proposed and the details of the test procedure are presented, along with a critical discussion of the results. Two series of samples are considered: untreated and mercerized bamboo fibers from the same batch, embedded in the same polyester matrix. Electron and optical microscopy are used to observe the fiber–matrix interface before and after the test, and to identify the failure mode of each sample, …

Go to article

Complementary Microscopy Techniques Applied For Characterizing The Localized Nanoscale Structure Of Poly (Vinylidene Fluoride), Wen Qian, Shuo Sun, Charles Nguyen, Wenlong Li, Stephen Ducharme, Joesph A. Turner Jan 2018

Complementary Microscopy Techniques Applied For Characterizing The Localized Nanoscale Structure Of Poly (Vinylidene Fluoride), Wen Qian, Shuo Sun, Charles Nguyen, Wenlong Li, Stephen Ducharme, Joesph A. Turner

Department of Mechanical and Materials Engineering: Faculty Publications

Poly (vinylidenefluoride) (PVDF), a well-recognized electroactive polymer, has been studied extensively over many decades. Recently, there has been increasing interest in tuning the electrical properties of PVDF from ferroelectric to piezoelectric and to pyroelectric, which can be attained via controlling the microscale structure down to the nanoscale structure [1-2]. To optimize the preparation conditions of PVDF and its copolymers, as well as to improve the performance for many applications, comprehensive analytical techniques are of great importance. In this paper, we demonstrate complementary nanoscale characterization and measurement techniques, by conducting a systematic and coordinated study involving scanning electron microscopy (SEM), high …

Go to article

Table Of Contents Jitim Vol 27 Issue 2, 2018 Jan 2018

Table Of Contents Jitim Vol 27 Issue 2, 2018

Journal of International Technology and Information Management

ToC JITIM vol 27 - 2, 2018

Go to article

Reaction Kinetics Of Ethane Partial Oxidation To Acetic Acid, Sulaiman Al-Mayman, Moustafa A. Soliman, Abdulrhman S. Al-Awadi, Yousef S. Al-Zeghayer Jan 2018

Reaction Kinetics Of Ethane Partial Oxidation To Acetic Acid, Sulaiman Al-Mayman, Moustafa A. Soliman, Abdulrhman S. Al-Awadi, Yousef S. Al-Zeghayer

Chemical Engineering

The partial oxidation of ethane to ethylene and acetic acid on supported MoVNbPd/TiO2 (P25 of Degussa) has been investigated. Pd was added in a nano-metallic form. The catalyst composition was also different from similar studied catalysts. This results in a better selectivity towards acetic acid formation. The reaction was carried out in a tubular reactor at temperature range 225–275 °C, total pressure range 0–200 psig and oxygen percentage in the feed gas of 10–40%. The feed gas contains ethane and oxygen. In this work, we develop a kinetic model for the reaction for the developed catalyst. In this model, we …

Go to article

A Novel Graphical Approach For Mass Exchange Networks Using Composition Driving Force, Nessren Farrag, Dina Kamel, Ayat Ossama, Mamdouh Gadalla, Mai Fouad Jan 2018

A Novel Graphical Approach For Mass Exchange Networks Using Composition Driving Force, Nessren Farrag, Dina Kamel, Ayat Ossama, Mamdouh Gadalla, Mai Fouad

Chemical Engineering

Raw materials are considered as a corner stone for both chemical and process industries. Raw materials efficient utilization and usage within the process saves a lot. Mass integration is the most competent path to minimize the economic and environmental losses, by minimizing both the amounts of external mass separating agents and waste disposal. Mass exchange networks or MENs is the tool used to apply this integration. This article presents a new graphical approach, based on the composition driving force, to analyse the mass integration and exchange networks. The new approach is illustrated graphically, and can be applied on existing and …

Go to article

Integration Of Biology, Ecology And Engineering For Sustainable Algal‑Based Biofuel And Bioproduct Biorefinery, James Allen, Serpil Unlu, Yaşar Demirel, Paul N. Black, Wayne R. Riekhof Jan 2018

Integration Of Biology, Ecology And Engineering For Sustainable Algal‑Based Biofuel And Bioproduct Biorefinery, James Allen, Serpil Unlu, Yaşar Demirel, Paul N. Black, Wayne R. Riekhof

Department of Chemical and Biomolecular Engineering: Faculty Publications

Despite years of concerted research efforts, an industrial-scale technology has yet to emerge for production and conversion of algal biomass into biofuels and bioproducts. The objective of this review is to explore the ways of possible integration of biology, ecology and engineering for sustainable large algal cultivation and biofuel production systems. Beside the costs of nutrients, such as nitrogen and phosphorous, and fresh water, upstream technologies which are not ready for commercialization both impede economic feasibility and conflict with the ecological benefits in the sector. Focusing mainly on the engineering side of chemical conversion of algae to biodiesel has also …

Go to article

Irrigation Pumps - Preserving Performance, Derrel L. Martin Jan 2018

Irrigation Pumps - Preserving Performance, Derrel L. Martin

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This paper describes how pumps must be matched to operating conditions and power units to provide the desired performance and efficiency. We have recently seen installations where one or more components are not properly matched causing higher than necessary pumping costs. Inspection and maintenance of systems and measurement of flow and pressure will go a long way toward monitoring if the proper conditions are being met. This paper also covers types of pumps, pump components, pump curves, impeller speed and trim, pump staging, affinity laws, pump drives, power units, cavitation, and net positive suction head.

Go to article

Detection Of Multi-Tomato Leaf Diseases (Late Blight, Target And Bacterial Spots) In Different Stages By Using A Spectral-Based Sensor, Jinzhu Lu, Reza Ehsani, Yeyin Shi, Ana Isabel De Castro, Shuang Wang Jan 2018

Detection Of Multi-Tomato Leaf Diseases (Late Blight, Target And Bacterial Spots) In Different Stages By Using A Spectral-Based Sensor, Jinzhu Lu, Reza Ehsani, Yeyin Shi, Ana Isabel De Castro, Shuang Wang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Several diseases have threatened tomato production in Florida, resulting in large losses, especially in fresh markets. In this study, a high-resolution portable spectral sensor was used to investigate the feasibility of detecting multi-diseased tomato leaves in different stages, including early or asymptomatic stages. One healthy leaf and three diseased tomato leaves (late blight, target and bacterial spots) were defined into four stages (healthy, asymptomatic, early stage and late stage) and collected from a field. Fifty-seven spectral vegetation indices (SVIs) were calculated in accordance with methods published in previous studies and established in this study. Principal component analysis was …

Go to article

Evaluation Of Variable Rate Irrigation Using A Remote-Sensing-Based Model, John Burdette Barker, Derek M. Heeren, Christopher M.U. Neale, Daran Rudnick Jan 2018

Evaluation Of Variable Rate Irrigation Using A Remote-Sensing-Based Model, John Burdette Barker, Derek M. Heeren, Christopher M.U. Neale, Daran Rudnick

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Improvements in soil water balance modeling can be beneficial for optimizing irrigation management to account for spatial variability in soil properties and evapotranspiration (ET). A remote-sensing-based ET and water balance model was tested for irrigation management in an experiment at two University of Nebraska-Lincoln research sites located near Mead and Brule, Nebraska. Both fields included a center pivot equipped with variable rate irrigation (VRI). The study included maize in 2015 and 2016 and soybean in 2016 at Mead, and maize in 2016 at Brule, for a total of 210 plot-years. Four irrigation treatments were applied at Mead, including: VRI based …

Go to article

Integration Of Hydrogeophysical Datasets And Empirical Orthogonal Functions For Improved Irrigation Water Management, Catherine E. Finkenbiner, Trenton E. Franz, Justin P. Gibson, Derek M. Heeren, J. D. Luck Jan 2018

Integration Of Hydrogeophysical Datasets And Empirical Orthogonal Functions For Improved Irrigation Water Management, Catherine E. Finkenbiner, Trenton E. Franz, Justin P. Gibson, Derek M. Heeren, J. D. Luck

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Precision agriculture offers the technologies to manage for infield variability and incorporate variability into irrigation management decisions. The major limitation of this technology often lies in the reconciliation of disparate data sources and the generation of irrigation prescription maps. Here the authors explore the utility of the cosmic-ray neutron probe (CRNP) which measures volumetric soil water content (SWC) in the top ~ 30 cm of the soil profile. The key advantages of CRNP is that the sensor is passive, non-invasive, mobile and soil temperature-invariant, making data collection more compatible with existing farm operations and extending the mapping period. The objectives …

Go to article

Dynamic Rops Test For Tractors Over 6,000 Kilograms, Caleb M. Lindhorst, Roger M. Hoy, Santosh Pitla, Michael F. Kocher Jan 2018

Dynamic Rops Test For Tractors Over 6,000 Kilograms, Caleb M. Lindhorst, Roger M. Hoy, Santosh Pitla, Michael F. Kocher

Department of Agricultural and Biological Systems Engineering: Faculty Publications

OECD static tests (Codes 4, 6, 7, and 8) for agricultural rollover protective structures (ROPS) have become accepted standards for evaluating the ability of these structures to protect the operator during tractor rollover events. The strength properties of some materials typically used in ROPS change because of cold weather embrittlement at low temperatures. The static ROPS tests lack the ability to evaluate the strength of these structures during cold weather. The use of the dynamic ROPS test is well noted as a means for proving cold weather embrittlement resistance properties. Unfortunately, application of the OECD dynamic ROPS test (Code 3) …

Go to article

The Open Source Gaitor Suite For Rodent Gait Analysis, Brittany Y. Jacobs, Emily H. Lakes, Alex J. Reiter, Spencer P. Lake, Trevor R. Ham, Nic D. Leipzig, Stacy L. Porvasnik, Christine E. Schmidt, Rebecca A. Wachs, Kyle D. Allen Jan 2018

The Open Source Gaitor Suite For Rodent Gait Analysis, Brittany Y. Jacobs, Emily H. Lakes, Alex J. Reiter, Spencer P. Lake, Trevor R. Ham, Nic D. Leipzig, Stacy L. Porvasnik, Christine E. Schmidt, Rebecca A. Wachs, Kyle D. Allen

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Locomotive changes are often associated with disease or injury, and these changes can be quantified through gait analysis. Gait analysis has been applied to preclinical studies, providing quantitative behavioural assessment with a reasonable clinical analogue. However, available gait analysis technology for small animals is somewhat limited. Furthermore, technological and analytical challenges can limit the effectiveness of preclinical gait analysis. The Gait Analysis Instrumentation and Technology Optimized for Rodents (GAITOR) Suite is designed to increase the accessibility of preclinical gait analysis to researchers, facilitating hardware and software customization for broad applications. Here, the GAITOR Suite’s utility is demonstrated in 4 models: …

Go to article

Greenhouse Gas Emissions From Beef Feedlot Surface Materials As Affected By Diet, Moisture, Temperature, And Time, Bryan L. Woodbury, John E. Gilley, David B. Parker, Bobbi S. Stomer Jan 2018

Greenhouse Gas Emissions From Beef Feedlot Surface Materials As Affected By Diet, Moisture, Temperature, And Time, Bryan L. Woodbury, John E. Gilley, David B. Parker, Bobbi S. Stomer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A laboratory study was conducted to measure the effects of diet, moisture, temperature, and time on greenhouse gas (GHG) emissions from feedlot surface materials (FSM). The FSM were collected from open-lot pens where beef cattle were fed either a dry-rolled corn (DRC) diet containing no wet distillers grains with solubles (WDGS) or a DRC diet containing 35% WDGS. The FSM were collected, air-dried or mixed with 3.0 L of water to represent dry or wet conditions, and then incubated at temperatures of 5°C, 15°C, 25°C, or 35°C. Static flux chambers were used to quantify GHG emissions over a 14-day period. …

Go to article

Surface Detention On Cropland, Rangeland, And Conservation Reserve Program Areas, John E. Gilley Jan 2018

Surface Detention On Cropland, Rangeland, And Conservation Reserve Program Areas, John E. Gilley

Department of Agricultural and Biological Systems Engineering: Faculty Publications

One of the factors contributing to overland flow on upland areas is water stored temporarily in a thin sheet on the soil surface as surface detention. This study was conducted to quantify surface detention on selected cropland, rangeland, and Conservation Reserve Program (CRP) sites. Surface detention was determined from the recession portion of runoff hydrographs corresponding with the period when rainfall had ceased but runoff continued. The hydrographs were generated from six previously reported rainfall simulation studies conducted on paired 3.7 m wide  10.7 m long plots on which approximately 128 mm of rainfall was applied. Surface detention values …

Go to article

Evaluation Of The Accuracy Of Machine Reported Can Data For Engine Torque And Speed (J1939), Rodney A. Rohrer, Joe D. Luck, Santosh K. Pitla, Roger M. Hoy Jan 2018

Evaluation Of The Accuracy Of Machine Reported Can Data For Engine Torque And Speed (J1939), Rodney A. Rohrer, Joe D. Luck, Santosh K. Pitla, Roger M. Hoy

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Most modern off-road machinery use embedded electronic controllers connected to a controller area network (CAN) to broadcast machine information for on-board processes and diagnostics. Commercially available tools can record CAN data for a variety of research and commercial uses. For agricultural tractors, there is an opportunity to create advanced test procedures that are more representative of field operations and that could supplement existing machine performance tests, such as the OECD Code 2 Standard Code for the Official Testing of Agricultural and Forestry Tractor Performance. CAN parameters provide an efficient way to collect tractor performance data during field operations. However, the …

Go to article

Prediction Of Agricultural Implement Hydraulic Power Requirements Using Controller Area Network Bus Data, Gabriel P. Stoll, Rodney A. Rohrer, Santosh K. Pitla, Joe D. Luck Jan 2018

Prediction Of Agricultural Implement Hydraulic Power Requirements Using Controller Area Network Bus Data, Gabriel P. Stoll, Rodney A. Rohrer, Santosh K. Pitla, Joe D. Luck

Department of Agricultural and Biological Systems Engineering: Faculty Publications

One of the important challenges in agricultural machinery research is the ability to effectively determine power requirements of a given field operation. The Controller Area Network (CAN) Bus, also known as ISOBUS, has proven to be an effective digital tool for tractor and implement data collection. This study attempted to determine implement hydraulic power requirements using a combination of existing public tractor CAN messages and minimal added sensors. The sensor signals were published on the CAN bus for ease of simultaneous sensor signal and CAN message data collection. Based upon the available CAN messages, this study attempted to measure hydraulic …

Go to article

Effects Of Alternate Wetting And Drying Irrigation Regime And Nitrogen Fertilizer On Yield And Nitrogen Use Efficiency Of Irrigated Rice In The Sahel, Koffi Djaman, Valere C. Mel, Lamine Diop, Abdoulaye Sow, Raafat El-Namaky, Baboucarr Manneh, Kazuki Saito, Koichi Futakuchi, Suat Irmak Jan 2018

Effects Of Alternate Wetting And Drying Irrigation Regime And Nitrogen Fertilizer On Yield And Nitrogen Use Efficiency Of Irrigated Rice In The Sahel, Koffi Djaman, Valere C. Mel, Lamine Diop, Abdoulaye Sow, Raafat El-Namaky, Baboucarr Manneh, Kazuki Saito, Koichi Futakuchi, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The objectives of this study were to investigate water saving strategies in the paddy field and to evaluate the performance of some of the newly released rice varieties. Field experiments were conducted at Fanaye in the Senegal River Valley during two rice growing seasons in 2015. Three irrigation regimes ((i) continuous flooding, (ii) trigging irrigation at soil matric potential (SMP) of 30 kPa, (iii) trigging irrigation at SMP of 60 kPa) were tested in an irrigated lowland rice field. Irrigation regimes (ii) and (iii) are alternate wetting and drying (AWD) cycles. Four inbred rice varieties (NERICA S-21, NERICA S-44, Sahel …

Go to article

Crop Evapotranspiration, Irrigationwater Requirement And Water Productivity Of Maize From Meteorological Data Under Semiarid Climate, Koffi Djaman, Michael O'Neill, Curtis K. Owen, Daniel Smeal, Komlan Koudahe, Margaret West, Samuel Allen, Kevin Lombard, Suat Irmak Jan 2018

Crop Evapotranspiration, Irrigationwater Requirement And Water Productivity Of Maize From Meteorological Data Under Semiarid Climate, Koffi Djaman, Michael O'Neill, Curtis K. Owen, Daniel Smeal, Komlan Koudahe, Margaret West, Samuel Allen, Kevin Lombard, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Under the semiarid climate of the Southwest United States, accurate estimation of crop water use is important for water management and planning under conservation agriculture. The objectives of this study were to estimate maize water use and water productivity in the Four Corners region of New Mexico. Maize was grown under full irrigation during the 2011, 2012, 2013, 2014 and 2017 seasons at the Agricultural Science Center at Farmington (NM). Seasonal amounts of applied irrigation varied from 576.6 to 1051.6 mm and averaged 837.7 mm and the total water supply varied from 693.4 to 1140.5 mm. Maize actual evapotranspiration was …

Go to article

First Prev Next Last