Engineering Commons^™

Compiler-Assisted Software Fault Tolerance For Microcontrollers, Matthew Kendall Bohman

Theses and Dissertations

Commercial off-the-shelf (COTS) microcontrollers can be useful for non-critical processing on spaceborne platforms. Many of these microprocessors are inexpensive and consume little power. However, the software running on these processors is vulnerable to radiation upsets, which can cause unpredictable program execution or corrupt data. Space missions cannot allow these errors to interrupt functionality or destroy gathered data. As a result, several techniques have been developed to reduce the effect of these upsets. Some proposed techniques involve altering the processor hardware, which is impossible for a COTS device. Alternately, the software running on the microcontroller can be modified to detect or …

Rotational Stiffness Models For Shallow Embedded Column-To-Footing Connections, Ashley Lauren Sadler

Theses and Dissertations

Shallow embedded steel column connections are widely used in steel buildings; however, there is insufficient research about this connection type to understand the actual rotational stiffness that the connection provides. Shallow embedded steel columns are when a steel column is anchored to the foundation slab and then unreinforced concrete is poured around the base plate and the base of the column. This thesis seeks to further quantify the rotational stiffness available in this type of connection due to the added concrete and improve an existing model in order to represent the rotational stiffness. Existing data from two series of experiments …

Virtual Stethoscope/Otoscope Duo, Camila P. Monchini, Paige R. Mazur, Christian Navarro

Biomedical Engineering

The virtual stethoscope/otoscope duo is a medical device intended to allow patients to be seen by their medical provider via internet consultations from the comfort of their own home. This device allows patients to substitute in-person doctor visits by checking a patient’s cardiovascular, respiratory, and auditory health. This document is the statement of work for the virtual stethoscope/otoscope duo and contains information on similar products, patents, and relevant literatures containing virtual technologies that assist in patient diagnosis. Product specifications and other details for the device such as performance evaluation review techniques can also be found within this document outlining the …

Review Of State Transportation Funding Initiatives, Bryan Gibson, Christopher W. Van Dyke, Steven Waddle, Steven Douglas Kreis

Kentucky Transportation Center Research Report

Despite significant cutbacks to the funding allocated to state departments of transportation (DOTs), demand for accessible and reliable transportation has increased even as existing transportation infrastructure has continued to age. Falling gasoline tax revenues resulting from increasing fuel efficiency and technological advancements have prevented state DOTs, including the Kentucky Transportation Cabinet (KYTC), from funding and financing much-needed transportation projects. Meanwhile, the Federal Highway Trust Fund, which provides funding to states and is tied to the federal gas tax, routinely receives cash infusions from the Federal General Fund to remain solvent—the federal gas tax has not been increased since 1993. Needing …

The Use Of Evidence-Based Design In Hospital Renovation Projects, David S. Whitaker

Theses and Dissertations

Since the 1960s, researchers have been exploring how the design of the built environment impacts the health and well-being of occupants and users. By the 1980s, further research began to focus on healthcare facilities in particular and how design could influence patient healing and medical staff performance (Alfonsi, 2014). Evidence-Based Design (EBD) is "the process of basing decisions about the built environment on credible research to achieve the best possible outcomes" (CHD, 2016). The desired outcomes of Evidence-Based Design recommendations include improvements in the following: patient healing, patient experience and comfort, medical staff performance, and medical staff job satisfaction (CHD, …

Waveguide-Based Spatial Light Modulators For Use In Holographic Video Displays, Kamran Qaderi

Theses and Dissertations

Film display holograms typically diffract light over a wide enough view-angle to be viewed, directly, without intervening optics. However, all holographic video displays must use optics beyond the hologram surface to overcome the challenges of small display extent and low diffraction angle by using some form of demagnification and derotation. We report a leaky mode waveg- uide spatial light modulator (SLM) with sufficiently high angular diffraction to obviate the need for demagnification in scanned aperture systems. This was achieved by performing a number of experiments to determine the depth of the annealed, proton-exchanged waveguide which corresponded to a maximized diffracted …

Human Factors Contributing To Unstabilized Approaches And Landings In Commercial Aviation Incidents: An Analysis Of Asrs Reports, Garrin E. Ross

Doctoral Dissertations and Master's Theses

The purpose of this study was to investigate the human factors reported as contributing to operational incidents of unstabilized approaches and landings in United States-based commercial aviation. While previous aviation safety studies have analyzed aviation incident data when investigating the human factor influences during commercial aviation operations and incidents, unstabilized approaches and landings have not been explicitly examined using similar methods. Informed by the findings and recommendations of the Flight Safety Foundation’s Approach and Landing Accident Reduction Task Force, this study examined and analyzed the Aviation Safety Reporting System (ASRS) incident report data from unstabilized approach and landing events. The …

Quadratic Two-Stage Stochastic Optimization With Coherent Measures Of Risk, Jie Sun, Li-Zhi Liao, Brian Rodrigues

Research Collection Lee Kong Chian School Of Business

A new scheme to cope with two-stage stochastic optimization problems uses a risk measure as the objective function of the recourse action, where the risk measure is defined as the worst-case expected values over a set of constrained distributions. This paper develops an approach to deal with the case where both the first and second stage objective functions are convex linear-quadratic. It is shown that under a standard set of regularity assumptions, this two-stage quadratic stochastic optimization problem with measures of risk is equivalent to a conic optimization problem that can be solved in polynomial time.

A Framework For Assessing The Economic Feasibility Of Leed For Homes Guidelines For Water Efficiency, Mohamed Abdel-Raheem, Jennifer Lima

Civil Engineering Faculty Publications

Sustainable practices have been on the rise during the last decade. From recycling to alternative energy sources, many studies have been conducted to incorporate green practices into people’s daily lives. However, cost efficiency can be a significant deterrent to begin or continue these practices. Homes are responsible for the consumption of a large portion of water in the United States. As such there is a need for more studies directed toward the assessment of the practical implementation of water efficiency. This study follows LEED v4 for homes guidelines to examine the feasibility of adopting green practices for water reduction. The …

Total Hemispherical Apparent Radiative Properties Of The Infinite V-Groove With Specular Reflection, Rydge B. Mulford, Nathan S. Collins, Michael S. Farnsworth, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Multiple reflections in a cavity geometry augment the emission and absorption of the cavity opening relative to a flat surface in a phenomenon known as the cavity effect. The extent of the cavity effect is quantified using apparent absorptivity and apparent emissivity. Analysis of complicated thermal systems is simplified through application of apparent radiative properities to cavity geometries. The apparent radiative properties of a specularly-reflecting, gray, isothermal V-groove have been derived analytically, but these results have not been validated experimentally or numerically. Additionally, the model for apparent absorptivity of an infinite V-groove subjected to partial illumination in the presence of …

Hiddencode: Hidden Acoustic Signal Capture With Vibration Energy Harvesting, Guohao Lan, Dong Ma, Mahbub Hassan, Wen Hu

Research Collection School Of Computing and Information Systems

The feasibility of using vibration energy harvesting (VEH) as an energy-efficient receiver for short-range acoustic data communication has been investigated recently. When data was encoded in acoustic signal within the energy harvesting frequency band and transmitted through a speaker, a VEH receiver was capable of decoding the data by processing the harvested energy signal. Although previous work created new opportunities for simultaneous energy harvesting and communication using the same hardware, the communication makes annoying sounds as the energy harvesting frequency band lies within the sensitive region of human auditory system. In this work, we present a novel modulation scheme to …

Asd Biomarker Detection On Fmri Images: Feature Learning With Data Corruptions By Analyzing Deep Neural Network Classifier Outcomes, Xiaoxiao Li 6984086

Yale Day of Data

Autism spectrum disorder (ASD) is a complex neurological and developmental disorder. It emerges early in life and is generally associated with lifelong disability. Finding the biomarkers associated with ASD is extremely helpful to understand the underlying roots of the disorder and find more targeted treatment. Previous studies suggested brain activations are abnormal in ASDs, hence functional magnetic resonance imaging (fMRI) has been used to identify ASD. In this work we addressed the problem of interpreting reliable biomarkers in classifying ASD vs. control; therefore, we proposed a 2-step pipeline: 1) classifying ASD and control fMRI images by deep neural network, and …

Efficient Dynamic Centrality Metrics For Election Advertising - A Case Study, Soheil Eshghi, Leandros Tassiulas

Yale Day of Data

In prior work [1], we have shown how advertising channels should be chosen by a budget-constrained electoral campaign. In this poster, we apply the resulting proposed algorithm to the MIT Social Evolution [2] data-set (N=84), which captured political discussions, inclinations, and voting behaviors around the 2008 US Presidential Election within a student dorm. We compare the resulting centrality metrics developed from our algorithm (which have a direct mapping to optimal channel choice decisions) against more traditional static centralities, and show how employing them leads to more votes.

[1] Eshghi, S., Preciado, V.M., Sarkar, S., Venkatesh, S.S., Zhao, Q., D'Souza, R. …

Fatigue Life Of Pitch- And Stall-Regulated Composite Tidal Turbine Blades, Ciaran R. Kennedy, Vesna Jaksic, Sean B. Leen, Conchúr M. Ó Brádaigh

Publications

Tidal turbine blades are subject to harsh loading and environmental conditions, including large thrust and torsional loadings, relative to wind turbine blades, due to the high density of seawater, among other factors. The complex combination of these loadings, as well as water ingress and associated composite laminate saturation, have significant implications for blade design, affecting overall device design, stability, scalability, energy production and cost-effectiveness. This study investigates the effect of seawater ingress on composite material properties, and the associated design and life expectancy of tidal turbine blades in operating conditions. The fatigue properties of dry and water-saturated glass fibre reinforced …

Preparation And Characterization Of Titanate-Phosphate Passivation Film On Tinplate, Zi-Yu Wang, Ming-Hao Wang, De-Yu Li, Ning Li

Journal of Electrochemistry

A passivation film was prepared on tinplate surface with a composite passivating agent made of titanate and phosphate. The surface morphologies, chemical compositions and corrosion resistances of the passivation films were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), salt spray test, Tafel polarization measurement and electrochemical impedance spectroscopy (EIS). The results were compared with those films untreated and treated with titanate or phosphate passivation. It was shown that the titanate and phosphate passivation film was mainly composed of Ti₃(PO₄)₄·nH₂O and TiO₂. The finely crystallized surface could seal …

Preparation And Properties Of Nanocrystalline Nickel By Pulse Electrodeposition On Glassy Carbon, Ya-Li Zhang, Ming-Xian Zhang, Teng-Da Guo, Yan-Jie Zhao, Sheng-Xue Yu

Journal of Electrochemistry

Nanocrystalline nickel exhibits electrocatalytic activity for methanol. In this work, nanocrystalline nickel coating has been obtained by using the double pulse method on glassy carbon materials surface. The influence of pulse conditions on the grain size of nanocrystalline nicke was studied. The concentrations and compositions of the plating bath were  300 g·L^-1 NiSO₄·6H₂O,45 g·L^-1 NiCl₂·6H₂O,40 g·L^-1 H₃BO₃,5 g·L^-1 C₇H₅NO₃S,and 0.05 g·L^-1 C₁₂H₂₅NaO₄S. The optimal pulse process parameters including the average pulse …

Synthesis And Electrochemical Properties Of Nickel-Rich Cathode Material Lini0.6Co0.2Mn0.2O2 With High Initial Coulombic Efficiency, Xiao-Yun Guan, Chao-Yu Hong, Jian-Ping Zhu, Wei-Li Wang, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

Nickel-rich cathode materials LiNi_0.6Co_0.2Mn_0.2O₂(NCM622)were synthesized by a co-precipitation-solid state sintering method at different temperatures. The structure, morphology and electrochemical performance of the as-prepared materials were investigated by X-ray powder diffraction (XRD) /Rietveld refinement, scanning electron microscope (SEM) and electrochemical experiments. It is found that NCM622 calcined at 800 ℃ showed the lowest degree of cation disorder (~1.97%) with a high initial Coulombic effiency of 92.2% and the capacity retention of 81.4% after 100 cycles.

Electrodeposition Of Cigs Thin Film With Special Structure Using Laser Etching Template, Jin-Zhi Yu, Ye Lian, Jin-Qiu Zhang, Pei-Xia Yang, Mao-Zhong An

Journal of Electrochemistry

Copper indium gallium selenide (Cu_1.00In_xGa_1-xSe_2.00, CIGS) thin film solar cells have a wide application in semiconductor thin film batteries. The CIGS absorbing layer is the key of the thin film solar cell material. Therefore, it is of theoretical and practical significance to carry out researches in CIGS thin films. In this work, the CIGS thin films with special structures were prepared by using laser etching template. The copper thin film was firstly electrodeposited in aqueous solution with Laser etching template. The influences of temperature, current and concentration of copper sulfate on morphology …

Superhydrophobic Surface On Aluminum Alloy By Hydrothermal Method And Its Electrochemical Performance, Xiao-Hang Chen, Mo-Jing Chen, Yu-Lin Min, Qun-Jie Xu

Journal of Electrochemistry

Superhydrophobic film formed on a metal surface is an effective way for corrosion protection. In this paper, the superhydrophobic film was prepared on the surfaces of aluminum alloy by hydrothermally treating with a solution containing CeCl₃·7H₂O and CO(NH₂)₂ , and a self-assemble process. The electrochemical measurements and surface morphology results confirmed that the best superhydrophobicity and electrochemical performance could be achieved with the contact angle of 155.5^o after six hours of hydrothermal reaction. Furthermore, the inhibition efficiency of 99.6% was obtained in 3.5 wt% NaCl aqueous solution, indicating the excellent corrosion resistance …

Intrinsic Kinetic Properties Of Ternary Material For Lithium Ion Batteries Assessed By Single Particle Microelectrode, Yi-Min Wei

Journal of Electrochemistry

Electrochemical performances such as capacity, rate, cycle and thermal stability of the nickel (Ni), cobalt (Co) and manganese (Mn) ternary cathode material, LiNi_xCo_yMn_zO₂ (x + y + z = 1), are significantly influenced by the proportion of Ni, Co, and Mn elements. To obtain higher specific capacity, LiNi_0.6Co_0.2Mn _0.2O₂ (NCM622) and LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) with high amounts of Ni element were employed for the lithium ion batteries. By now, many studies have been focusing on the thermal and cycling stabilities of …

Preparation And Electrocatalytic Activity Of Nitrogen-Doping Tungsten Carbide Catalyst, Pian-Pian Yang, Li-Zhen Huang, Ying-Ying Li, Mei-Qin Shi, Chun-An Ma

Journal of Electrochemistry

Tungsten carbide (WC) is a promising electrocatalyst, however, its electrocatalytic activity is far inferior to Pt and Pt-group metal. In this work, nitrogen-doping tungsten carbide (WN|WC) catalysts with a nanoplate morphology were prepared via the tungsten nitride (WN) as the precursor and sodium tungstate as the tungsten source. The SEM and TEM results indicated that carbon atoms entered into the WN lattice to form the hexagonal close packed WC phase. In this way, an atomic scale heterostructure involving the closely linked interfaces between WN and WC was created . The XRD data confirmed that the cubic crystal structure of WN …

Deposition Mechanism And Coating Characterization For The Trivalent Chromium Electrodeposition In Sulphate Electrolyte, Hui Yan, Shuai-Shuai Huang, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

Linear sweep voltammetry (LSV) and cyclic voltammetry (CV) were used to study the electrodeposition mechanism of trivalent chromium on a copper electrode in the novel sulphate electrolyte for thick trivalent chromium plating. The thickness, morphology, composition, microhardness, and structure, as well as the corrosion resistance in 3.5wt% NaCl solution of the trivalent chromium coatings were investigated by X-ray fluorescence gage, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), microhardness tester, X-ray diffraction (XRD) and Tafel curve measurements. The results showed that the electrodeposition of trivalent chromium involved two consecutive one electron reduction steps. The first step, Cr³⁺ + e …

Surface Ehancement Of Nickel Ions On Cyanide Free Immersion Gold Deposited From A Chloroauric Acid-Choline Chloride Solution On Medium-Phosphorus Nickel, Tian-Yu Xu, Shi-Ying Wang, Wen-Chang Wang, Zhi-Dong Chen

Journal of Electrochemistry

The nickel ions (Ni²⁺) were introduced into choline chloride (ChCl) cyanide free immersion gold solution to improve the surface quality of electrodeposition on medium-phosphorus nickel substrate. The addition of Ni²⁺ had no significant impact on the plating speed. However, the hyperactive corrosion of nickel substrate could be effectively alleviated by the addition of 500 mg·L^-1 NiCl₂·6H₂O, and the surface morphology of gold coating could be greatly improved. The choline chloride bath has great potential for industrial production due to its high Ni²⁺ carrying capacity (2000 mg·L^-1) and superior applicability …

Applications Of Electrospinning In Lithium-Air Batteries, Yue Fu, Jin Wang, Hai-Yang Yu, Jing-Hua Tian, Rui-Zhi Yang

Journal of Electrochemistry

Lithium-air batteries have received increasing attention as the “ultimate batteries” due to their extremely high theoretical capacity and environment friendly. However, there are still many obstacles hindering the wide applications of the lithium-air batteries owing to the limitations of large charge-discharge over-potentials, poor Columbic efficiency and cycling performance. Exploring of high-efficiency, low-cost and eco-friendly catalysts is one of the vital issues for lithium-air batteries. Meanwhile, electrospinning techniques have been under substantial developments due to its simple fabrication process, high efficiency and production. This paper reviews the recent progresses in fabrications of various novel catalysts for lithium-air batteries with electrospinning techniques, …

Preface For Special Issue On Electroplating And Surface Finishing, Mao-Zhong An

Journal of Electrochemistry

/

Combinations Of Plant Water-Stress And Neonicotinoids Can Lead To Secondary Outbreaks Of Banks Grass Mite (Oligonychus Pratensis Banks), Alice Ruckert, L. Niel Allen, Ricardo A. Ramirez

Civil and Environmental Engineering Faculty Publications

Spider mites, a cosmopolitan pest of agricultural and landscape plants, thrive under hot and dry conditions, which could become more frequent and extreme due to climate change. Recent work has shown that neonicotinoids, a widely used class of systemic insecticides that have come under scrutiny for non-target effects, can elevate spider mite populations. Both water-stress and neonicotinoids independently alter plant resistance against herbivores. Yet, the interaction between these two factors on spider mites is unclear, particularly for Banks grass mite (Oligonychus pratensis; BGM). We conducted a field study to examine the effects of water-stress (optimal irrigation = 100% …

Advancing Distributed Data Management For The Hydroshare Hydrologic Information System, Hong Yi, Ray Idaszak, Michael Stealey, Chris Calloway, Alva L. Couch, David G. Tarboton

Civil and Environmental Engineering Faculty Publications

HydroShare (https://www.hydroshare.org) is an online collaborative system to support the open sharing of hydrologic data, analytical tools, and computer models. Hydrologic data and models are often large, extending to multi-gigabyte or terabyte scale, and as a result, the scalability of centralized data management poses challenges for a system such as HydroShare. A distributed data management framework that enables distributed physical data storage and management in multiple locations thus becomes a necessity. We use the iRODS (Integrated Rule-Oriented Data System) data grid middleware as the distributed data storage and management back end in HydroShare. iRODS provides a unified virtual file system …

Numerical Simulation Of Energy Localization In Dynamic Materials, Arkadi Berezovski, Mihhail Berezovski

Publications

Dynamic materials are artificially constructed in such a way that they may vary their characteristic properties in space or in time, or both, by an appropriate arrangement or control. These controlled changes in time can be provided by the application of an external (non-mechanical) field, or through a phase transition. In principle, all materials change their properties with time, but very slowly and smoothly. Changes in properties of dynamic materials should be realized in a short or quasi-nil time lapse and over a sufficiently large material region. Wave propagation is a characteristic feature for dynamic materials because it is also …

The Suitability Of Zn–1.3% Fe Alloy As A Biodegradable Implant Material, Alon Kafri, Shira Ovadia, Jeremy Goldman, Jaroslaw W. Drelich, Eli Aghion

Michigan Tech Publications, Part 1

Efforts to develop metallic zinc for biodegradable implants have significantly advanced following an earlier focus on magnesium (Mg) and iron (Fe). Mg and Fe base alloys experience an accelerated corrosion rate and harmful corrosion products, respectively. The corrosion rate of pure Zn, however, may need to be modified from its reported ~20 µm/year penetration rate, depending upon the intended application. The present study aimed at evaluating the possibility of using Fe as a relatively cathodic biocompatible alloying element in zinc that can tune the implant degradation rate via microgalvanic effects. The selected Zn–1.3wt %Fe alloy composition produced by gravity casting …

Electric Vehicle Grid Experiments And Analysis, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

This project developed a low cost building energy management system (EMS) and conducted vehicle-to-grid (V2G) experiments on a commercial office building. The V2G effort included the installation and operation of a Princeton Power System CA-30 bi-directional power system. These experiments targeted the reduction of utility peak electrical demand for a commercial office building. In each case, total building peak demand was managed through a computer algorithm to limit the charging rate of electric vehicles or used the vehicle's on-board traction battery as a storage device to minimize peak electrical loads.