Engineering Commons^™

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• IT Students Win SE Decision Sciences Institute 2018 Best Paper Award

Relationship Between Anisotropy And Dispersive Stress In Wind Plants With Variable Spacing, Tamara S. Dib

Dissertations and Theses

Large eddy simulations are considered for wind plants with varied spanwise and streamwise spacing. Data from five different configurations of staggered and aligned LES wind turbine arrays with a neutrally stratified atmospheric boundary layer are employed for analysis. Fields are analyzed by evaluating the anisotropy stress invariants based on the Reynolds shear stresses and dispersive stress tensor. The relationship between quantities are drawn as a function of the wind plant packing. Reynolds stresses and dispersive stresses are investigated alongside a domain altered version of the second and third scalar invariants, ξ, η, as well as the combination of the …

Feasibility Of Using Graphene Oxide Nanoflake (Gonf) As Additive Of Cement Composite, Jinwoo An, Matthew Mcinnis, Wonseok Chung, Boo Hyun Nam

Civil Engineering Faculty Publications

The object of this study is to investigate the feasibility of ball-milled graphene oxide nanoflakes (GONFs) produced by a mechanochemical process as an additive in Ordinary Portland Cement (OPC)-based paste and concrete. Different percentages of GONFs (0.01–1 wt. %) were added in OPC paste mix to find the optimum content of GONF in GONF-combined cement composites. To investigate the effect of the changes in the mix design on OPC paste, two mix design methods were employed: (1) Dry-mix, where GONFs and OPC powders are mixed prior to paste formation and (2) Wet-mix, where sonicated GONFs solution is used as the …

An Analysis Of Project Setup And Organization In Software, Adam Fitzgibbon

Honors Program: Senior Projects (Public)

The setup of a software project can greatly influence how efficiently software can be built. In this paper, I will be discussing my experiences with various software projects and their setups. These experiences will be used as a basis to draw conclusions on the strengths and weaknesses of specific project setups in certain situations.

Because of the complexity of building software, there isn’t a project setup that works optimally for solving every type of software-based problem. The best approach is to know what variations would best fit the situation and make design decisions from there.

Qtsac: An Energy-Efficient Mac Protocol For Delay Minimization In Wireless Sensor Networks, Yuxin Liu, Kaoru Ota, Kuan Zhang, Ming Ma, Naixue Xiong, Anfeng Liu, Jun Long

Department of Electrical and Computer Engineering: Faculty Publications

Millions of sensors are deployed to monitor the smart grid. They consume huge amounts of energy in the communication infrastructure. Therefore, the establishment of an energy-efficient medium access control (MAC) protocol for sensor nodes is challenging and urgently needed. The Quorum-based MAC protocol independently and adaptively schedules nodes’ wake-up times and decreases idle listening and collisions, thereby increasing the network throughput and extending the network lifetime. A novel Quorum time slot adaptive condensing (QTSAC)-based MAC protocol is proposed for achieving delay minimization and energy efficiency for the wireless sensor networks (WSNs). Compared to previous protocols, the QTSAC-based MAC protocol has …

1974 - Geology Of The Southern Salinas Valley Area, California

Miscellaneous Federal Documents & Reports

This 1974 report about the geology of the southern Salinas Valley was concerned mainly with relating the occurrence of petroleum and other mineral commodities to the Cenozoic history of the area. The investigation had two phases. First phase involved detailed geologic mapping of quadrangles that cover most of Tertiary beds west of the Salinas River. Second phase included a reconnaissance geologic mapping to extend the results of the first phase to a larger area. The report summarizes results of the geologic investigation of the entire southern Salinas Valley area.

Supported Perovskite-Type Oxides: Establishing A Foundation For Co2 Conversion Through Reverse Water-Gas Shift Chemical Looping, Bryan J. Hare

USF Tampa Graduate Theses and Dissertations

Perovskite-type oxides show irrefutable potential for feasible thermochemical solar-driven CO₂ conversion. These materials exhibit the exact characteristics required by the low temperature reverse water-gas shift chemical looping process. These properties include structural endurance and high oxygen redox capacity, which results in the formation of numerous oxygen vacancies, or active sites for CO₂ conversion. A major drawback is the decrease in oxygen self-diffusion with increasing perovskite particle size. In this study, the La_0.75Sr_0.25FeO₃ (LSF) perovskite oxide was combined with various supports including popular redox materials CeO₂ and ZrO₂ along with more abundant …

Electric Vehicle And Wireless Charging Laboratory, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

Wireless charging tests of electric vehicles (EV) have been conducted at the EVTC Wireless Laboratory located at the Florida Solar Energy Center, Cocoa, FL. These tests were performed to document testing protocols, evaluate standards and evaluate operational related wireless charging characteristics. The presented results give the charging efficiency of a Plugless wireless charger of 3.3 kW rated input power operating at 20 kHz resonant frequency. The results show a maximum charging efficiency of 94% at about 19 cm (7.5 in) of vertical separation. The electric and magnetic fields emanating from the transmitter were measured with and without the unit installed …

Effect Of Pipe Rotation On Casing Pressure Within Mpd Applications, Zahrah Ahmed Al Marhoon

LSU Master's Theses

Well control is one of the most crucial sectors in drilling engineering. Human lives and safety depend on the correct execution of the engineering design. Managed Pressure Drilling (MPD) is a new technology that has recently emerged in the oil and gas industry. It has special well control abilities supported by the RCD to continue drilling or carry operations that involve pipe rotation, while circulating out a gas kick. This thesis examines the effect of pipe rotation on casing pressure profiles within MPD kick circulation application. The analysis was carried on real scale kick experiments. These experiments were carried in …

Numerical Simulation Of Heat Transfer And Chemistry In The Wake Behind A Hypersonic Slender Body At Angle Of Attack, Matthew J. Satchell, Jeffrey M. Layng, Robert B. Greendyke

Faculty Publications

The effect of thermal and chemical boundary conditions on the structure and chemical composition of the wake behind a 3D Mach 7 sphere-cone at an angle of attack of 5 degrees and an altitude of roughly 30,000 m is explored. A special emphasis is placed on determining the number density of chemical species which might lead to detection via the electromagnetic spectrum. The use of non-ablating cold-wall, adiabatic, and radiative equilibrium wall boundary conditions are used to simulate extremes in potential thermal protection system designs. Non-ablating, as well as an ablating boundary condition using the “steady-state ablation” assumption to compute …

Design And Implementation Of A Ferrocement Improved Cookstove In Rural Panama, Josh Donegan

USF Tampa Graduate Theses and Dissertations

Household air pollution contributes to the premature death of more than 4 million people annually. Improved cookstoves are one technological intervention that can potentially reduce exposure to household air pollution. However, improved cookstove implementation programs need to consider measures to increase sustainability and promote long-term adoption. The objectives of this research were 1) to develop and implement a new ferrocement cookstove for Peña Blanca, a rural indigenous community in the Ngäbe-Bugle region of Panama, 2) to evaluate its potential sustainability in comparison to the most common cooking technologies observed in the community, 3) to prepare a construction manual for the …

Orthogonal Photo-Switching Of Supramolecular Patterned Surfaces, Dongsheng Wang, Frank Schellenberger, Jonathan T. Pham, Hans-Jürgen Butt, Si Wu

Chemical and Materials Engineering Faculty Publications

We used Azo/α-CD and ipAzo/γ-CD host–guest complexes to demonstrate that four independent stable states can be orthogonally photo-switched by UV (365 nm), blue (470 nm), green (530 nm) and red light (625 nm). A supramolecular patterned surface was fabricated and orthogonally photo-switched by light with different wavelengths.

Development Of A Resilient 3-D Printer For Humanitarian Crisis Response, Benjamin L. Savonen, Tobias Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Greshonen, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Rapid manufacturing using 3-D printing is a potential solution to some of the most pressing issues for humanitarian logistics. In this paper, findings are reported from a study that involved development of a new type of 3-D printer. In particular, a novel 3-D printer that is designed specifically for reliable rapid manufacturing at the sites of humanitarian crises. First, required capabilities are developed with design elements of a humanitarian 3-D printer, which include, (1) fused filament fabrication, (2) open source self-replicating rapid prototyper design, (3) modular, (4) separate frame, (5) protected electronics, (6) on-board computing, (7) flexible power supply, and …

2018 Oklahoma Research Day Guide Book, Southwestern Oklahoma State University

Oklahoma Research Day Abstracts

This is the 2018 Oklahoma Research Day Guide Book. This book does not contain abstracts.

Promoting Mathematics Education In Dual-Language Education Programs In Spanish Towards A Growing Understanding Of Engineering, Marialuisa Di Stefano, Idalis Villanueva

Engineering Education Faculty Publications

This work addresses the lack of a national guidance for the integration of mathematics and engineering in the Dual Language Education (DLE) programs in Spanish. Participants will learn about the impact of DLE programs on Latina/o students, and explore potential guidelines and strategies to implement mathematics and engineering in DLE schools. Educators and program developers, advocating for the integration of STEM knowledge in DLE programs in their district(s)/school(s), would particularly benefit from this session.

Transit Demand Analysis And User Classification Using Automatic Fare Collection (Afc) Data, Alireza Khani

PSU Transportation Seminars

Development of origin-destination demand matrices is crucial for transit planning. The development process is facilitated by transit automated data, making it possible to mine boarding and alighting patterns on an individual basis. This research proposes a novel stochastic trip chaining method which uses Automatic Fare Collection (AFC) and General Transit Feed Specifications (GTFS) data to infer an origin-destination (O-D) matrix.

Use Of Excel Spreadsheet Calculators In Handling Data Generated From Uv- Spectrometer, Mercy Okezue, Kari Clase, Steve Byrn

BIRS Symposium

To ease the complexities of handling data generated from different analytical procedures, validated excel spreadsheet containing relevant formulas are developed to ensure the process of data handling will consistently produce the expected results. This paper introduces the use of Excel spreadsheets in handling data generated from using a UV-Spectrometer in determination of analyte concentration in various dosage forms

An Experimental Study On Static And Dynamic Strain Sensitivity Of Embeddable Smart Concrete Sensors Doped With Carbon Nanotubes For Shm Of Large Structures, Andrea Meoni, Antonella D'Alessandro, Austin Downey, Enrique García-Macías, Marco Rallini, A. Luigi Materazzi, Luigi Torre, Simon Laflamme, Rafael Castro-Triguero, Filippo Ubertini

Faculty Publications

The availability of new self-sensing cement-based strain sensors allows the development of dense sensor networks for Structural Health Monitoring (SHM) of reinforced concrete structures. These sensors are fabricated by doping cement-matrix mterials with conductive fillers, such as Multi Walled Carbon Nanotubes (MWCNTs), and can be embedded into structural elements made of reinforced concrete prior to casting. The strain sensing principle is based on the multifunctional composites outputting a measurable change in their electrical properties when subjected to a deformation. Previous work by the authors was devoted to material fabrication, modeling and applications in SHM. In this paper, we investigate the …

Classical Molecular Dynamics Study For Defect Sink Behavior In Oxide Dispersed Strengthened Alloys, M. Mustafa Azeem, Zhongyu Li, Qingyu Wang, Qazi Muhammad Nouman Amjad, Muhammad Zubair, O. M.H. Ahmed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide Dispersed Strengthened (ODS) alloys are considered as a potential candidate for future generation reactors and can even be graded as better radiation resistant materials than the ones already in use. Molecular dynamics (MD) simulation study for defect sinks properties of ODS alloys have been investigated at 700K using LAMMPS (Atomic/Molecular massively parallel simulator software. SRIM (stopping range of ions in matter) code was used to see the approximate range of the ions and damage cascade profile. It has been observed that the oxide particle attracts vacancies/interstitials produced in the base matrix near the interface. The modeled structure looked amorphous …

Instituting Process Control Mechanisms In A Quality Control Analytical Chemistry Laboratory, Mercy Okezue, Kari Lynn Clase, Stephen Byrn

BIRS Symposium

Statistical Process Control by means of using control charts was a means of monitoring performance of analytical equipment. Quality control checks on test items using these equipment generated data used for plotting X-bar charts. The charts generated had warning and control limits which helped monitor system performance

Study Of Abnormal Grain Growth In Beta Annealed Ti-6al-4v Forgings, Lee R. Morris

Theses and Dissertations

Beta annealed Ti-6Al-4V has been used extensively in current aerospace platforms due to properties such as high strength to weight ratio. Recent inspections during aircraft production have revealed regions of excessive grain sizes, resulting in quarantined parts and excessive time spent on root cause analysis and risk mitigation efforts. Uncertainty surrounding these parts has led to increased costs and may cause future aircraft production delays. Part manufacturers have intermittently reported problems with abnormal grain growth in these alloys for years, but to date no supplier has been able to determine the source of this microstructural phenomenon. Leveraging common Finite Element …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• 2018 Student Research Symposium

The Journal Of Undergraduate Research: 2017

The Journal of Undergraduate Research

This is the complete issue of the South Dakota State University Journal of Undergraduate Research, Volume 15.

Analysis Of Additively Manufactured Injectors For Rotating Detonation Engines, Michael C. Waters

Theses and Dissertations

This research represents an experimental and computational analysis of additively manufactured injectors for Rotating Detonation Engines (RDEs) for use in rocket propulsion. This research was based on the manufacture and testing of existing injector element designs using additive techniques. The designs were modeled from geometries gathered from Sutton and Biblarz Elements of Rocket Propulsion [23]. The goal of this research was to characterize the viscous losses of each design based on the discharge coefficient. The designs were computationally simulated to gain insight to the flow characteristics using multiple sets of conditions for surface roughness and inlet pressure. The results were …

New Flow Assurance System With High Speed Subsea Fiber Optic Monitoring Of Pressure And Temperature, John Hedengren, David Brower, J. Conrad Wilson, Geoff High, Karl Witherow

Faculty Publications

Subsea production control systems are instrumented to constantly monitor flowline pressure and temperature at key locations to prevent plugging and introduce mitigating control strategies. New fiber optic sensors with ruggedized construction and non-electrical components are subjected to accelerated aging tests and deployed in several installations with long service life. An overview of current progress with fiber optic technology is provided for fatigue monitoring, temperature, pressure, and strain sensing. Recent developments include improved service life, novel bonding methods, pipeline sensor station improvements, sensor calibration, and long-term fatigue analysis.

The latest advancements are validated on multiple installations on a subsea tieback in …

Helipad Design And Best Practices, Andrew Swanson

Purdue Road School

Heated Permeable Concrete Helipads for Safety and Surety - The latest in helipad construction technologies has combined with aeronautical consultant-guided design to create helipads that are safe and environmentally friendly and that meet the guidelines of the FAA, state, local agencies, and first responders. Join us to learn about heated permeable concrete helipads, which offer safety to flight crew, patient, and helicopter by eliminating ice and snow on the pad and pathways.

Rehabilitation Of Central Avenue Historic Stone Arch, Katlyn Shergalis

Purdue Road School

Indianapolis’s Central Avenue Historic Arch over Fall Creek was in immediate need of rehabilitation. Due to the historic nature of the structure, coordination was required with all of the state agencies to resolve issues and conflicts while maintaining the original integrity. We will share lessons learned as they relate to the complexity of the design with regard to the historic arch, the mapping of stones, and the plan details required to identify all features.

Driving The Future: Mobility In The 21st Century, Ted Hamer

Purdue Road School

As part of its future-focused infrastructure planning, INDOT is embarking on a project with Purdue University to understand how the development of transportation infrastructure can be linked to benefits to business supply chains, thus enabling decisions to nurture an ecosystem around connected and autonomous vehicles (CAVs). KPMG will provide insight into the CAV industry.

When To Use Midwest Guardrail System (Mgs) W-Beam Guardrail, Katherine Smutzer

Purdue Road School

In this session we will discuss when MGS w-beam guardrail should be placed on state and local projects and review pertinent INDOT Design Memos released over the past year.

Incorporating Ada And Aps Work On Traffic Contracts: Design Guidance And Construction Standards, Joseph Bruno

Purdue Road School

The presentation provides an overview of the Indiana Department of Transportation's design guidance and construction standards on curb ramps and accessible pedestrian signals. The presentation also summarizes the Indiana Department of Transportation's policy on when existing curb ramps and pedestrian pushbuttons must be upgraded as part of a traffic construction contract and when an upgrade is optional.