Engineering Commons^™

Radio-Frequency Transmitter Geolocation Using Non-Ideal Received Signal Strength Indicators, Samuel Whiting

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Locating a radio transmitter is important in a number of problems such as finding radio tags, people with radios, and devices that are collecting information in an unauthorized manner. Locating a radio transmitter is inherently difficult because the radio waves of concern are not in the visible spectrum, they reflect and distort easily, and they propagate at the speed of light.

A number of methods for locating transmitters are currently used, the majority of which require expensive hardware and extensive processing. This thesis presents a method of using simpler measurements to produce similar location estimates in order to augment or …

The Effects Of Surge Flows On Residential Water Meters, Ryan P. Weller

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

All residential water meters have published flow rates for which they will operate as designed. These specifications include a maximum operating flow rate, which is recommended not to exceed. However, there are situations which may cause a meter to flow above the maximum flow rate. This thesis explores what effect these surge flows have on residential water meters.

Twenty-one 5/8”x3/4” meters were tested in this study: three oscillating pistons, six nutating disks, nine ultrasonic, and three electromagnetic. Testing was done at the Utah Water Research Laboratory using a gravimetric test bench specifically designed for residential water meter testing.

The results …

Importance Of Exposure Time On Digital Image Correlation (Dic) At Extreme Temperatures, Thinh Quang Thai

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Extreme temperatures have increasingly played an important role in engineering applications, including leading edges during hypersonic flight, spacecraft re-entry, and propulsion systems. In order to design for such thermo-mechanical conditions, materials must be characterized using suitable measurement methods. DIC is a popular and versatile method in full-field measurement. In brief, DIC compares images of a sample between its undeformed and deformed state in order to get displacement and strain field maps. Since the images are acquired from digital cameras, it is important to have high contrast images for meaningful correlation. Exposure time is a pivotal camera setting relating to camera …

Intersection Safety Analysis Methodology For Utah Roadways, Joshua Daniel Gibbons

Theses and Dissertations

Roadway safety continues to be a priority for the Utah Department of Transportation (UDOT) Traffic and Safety Division. UDOT has participated in and managed several research projects in recent years to determine the roadway segments of highest safety concern in the state. This research has provided UDOT with more tools to assist in safety project prioritization. Researchers in Department of Civil and Environmental Engineering at Brigham Young University (BYU) have worked with UDOT and the Statistics Department at BYU to create two network screening statistical tools called the Utah Crash Prediction Model (UCPM) and the Utah Crash Severity Model (UCSM) …

Effects Of Gsk101 Exposure On Astrocyte Mechanical Properties, Collagen Production, And Viability, Ethan Echols

Biomedical Engineering Undergraduate Honors Theses

Transient receptor potential vanilloid 4 (TRPV4) is a cation channel protein which is thought to facilitate extracellular matrix (ECM) modification and glial scar formation following traumatic brain injury (TBI). Activation of TRPV4 has been shown to correlate with an increase in intracellular Ca²⁺ concentration. TRPV4 is subject to both chemical and mechanical activation. This study involved chemical activation of TRPV4 in cultured mouse astrocytes using GSK101, the primary agonist of TRPV4, and subsequent evaluation of mechanical and chemical changes to the ECM. Prior to GSK101 exposure, the cells were seeded into Matrigel Matrix, a gelatinous protein mixture intended to …

The Effect Of Elastin Degradation On The Biomechanical Properties Of Porcine Aortic Tissue, Caleb Nissen

Biomedical Engineering Undergraduate Honors Theses

The rupture of abdominal aortic aneurysms (AAA) is currently the 13^th leading cause of death in the United States [1]. AAA is characterized, in part, by an increase in presence of proteolytic enzymes which degrade the structural proteins collagen and elastin [6]. The goal of this study was to examine the effect that elastin degradation has on the biomechanical properties of aortic tissue. For this experiment, porcine aortic tissue was cut in the circumferential and longitudinal directions. These specimens were exposed to an elastase solution for varying time-intervals and then underwent uniaxial tensile testing. Elastase-treated tissue tested in the …

Extraction And Analysis Of Vector Flow Imaging Data In A Pediatric Population, Bailey Stinnett

Biomedical Engineering Undergraduate Honors Theses

Vector flow imaging (VFI) is a new ultrasound technology that provides real time, angle-independent visualization of flow velocities in the heart and great vessels. Thus far, VFI has been used for superficial applications due to the limited penetration depth of available transducer probes; however, this depth in smaller pediatric patients enables adequate aortic views. In this project, VFI was used to study pediatric aortic stenosis (PAS)—a congenital heart defect that results in the narrowing of the aorta and/or aortic valve. The decision to refer PAS patients for surgical or catheter-based intervention is initially based on Doppler ultrasound. VFI is potentially …

Analysis Of Biological Response To Ecm Hydrogel Injection, Grady Dunlap

Biomedical Engineering Undergraduate Honors Theses

Abstract

Under normal circumstances, skeletal muscle possesses the capacity to regenerate and heal via inflammatory and myogenic pathways. In cases of severe tissue loss or certain diseases, this capacity is lost, often resulting in loss of tissue function. Extracellular matrix (ECM), the protein scaffold which houses cells in physiological tissue, has been shown to have structural and chemical properties which influence cell migration and phenotype. This results in ECM’s capacity to encourage a regenerative response when implanted into severely damaged skeletal muscle. Additional advantages are apparent when an ECM scaffold is digested into a hydrogel, namely less invasive implantation via …

Digital Automatic Speech Recognition Using Kaldi, Sarah Habeeb Alyousefi

Theses and Dissertations

The Automatic speech recognition (ASR) system is one of most important technologies that used for human-machine interaction. The main goal of the ASR system is to recognize different natural languages that are spoken by humans. The difficulties of these recognition systems depend on many factors, such as noises, variability of the speakers, and problems of continuous speech. For that reason, many researchers and foundations have designed different kinds of licensed toolkits and software that are specialized in building speech recognition systems, including , Julius, Sphinx-4, RWTH ASR, and HTK toolkits. In this thesis, Kaldi toolkit, which is one of the …

Pollen Grains Recognition Based On Computer Vision Methods, Amar Idrees Daood

Theses and Dissertations

The classification of pollen grains is a main task in many disciplines including ecology, forensic sciences, allergy control, and oil exploration. In these application areas, visual inspection is the common method used for classifying pollen. However, recognition by visual inspection consumes much time and effort. Even though some level of automation exists, the automatic recognition of pollen grains remains an open problem. Current pollen-classification solutions rely on measurements of visual cues such as contour or texture. However, these features do not capture the visual complexity of information needed for discriminating among various species of pollen, especially when both a large-scale …

Design And Optimization Of A Passive Magnetic Thrust Bearing, Thomas Matthew Lasko

Theses and Dissertations

High-speed turbomachines present a number of unique challenges and problems. Large centrifugal forces create high stresses in rotating components, friction leads to elevated temperatures and component failure, and rotordynamic instability makes control difficult. The weak link in these high-speed systems is often the bearings because they provide the interface between the rotating and stationary components. Traditional bearings often fail in these conditions, especially when relatively large force capacities are required. In miniature gas turbines for unmanned aerial vehicle (UAV) applications, traditional bearings exhibit a typical lifetime of only 25 hours due to excessive axial loading. This research presents a passive …

Development Of Recyclability Index: A Design For Assembly And Disassembly Approach, Darshan Yadav

Theses and Dissertations

Designing products for recyclability is driven by environmental and economic goals. Several Design for Assembly(DFA) rules and parameters can be used to gauge the recyclability index of product designs. These indices can be used for comparative analysis of the recyclability of different products. This assists the designer in making design choices related to the product’s end of life. However, many of the existing recyclability indices are only available after design and manufacturing decisions are made. If such design decisions could be made earlier in the design process, when the design space is less bound, recyclability could be considered earlier. A …

Quantitative Methods For Select Problems In Facility Location And Facility Logistics, Bin Li

Graduate Theses and Dissertations

This dissertation presented three logistics problems. The first problem is a parallel machine scheduling problems that considers multiple unique characteristics including release dates, due dates, limited machine availability and job splitting. The objective of is to minimize the total amount of time required to complete work. A mixed integer programming model is presented and a heuristic is developed for solving the problem. The second problem extends the first parallel scheduling problem to include two additional practical considerations. The first is a setup time that occurs when warehouse staff change from one type of task to another. The second is a …

Optimal Allocation Of Resources In Reliability Growth, Mohammadhossein Heydari

Graduate Theses and Dissertations

Reliability growth testing seeks to identify and remove failure modes in order to improve system reliability. This dissertation centers around the resource allocation across the components of a multi-component system to maximize system reliability. We summarize this dissertation’s contributions to optimal resource allocation in reliability growth.

Chapter 2 seeks to deploy limited testing resources across the components of a series-parallel system in effort to maximize system reliability under the assumption that each component’s reliability exhibits growth according to an AMSAA model with known parameters. An optimization model for this problem is developed and then extended to consider the allocation of …

Demonstrating Set-Based Design Techniques- A Uav Case Study, Colin Small

Graduate Theses and Dissertations

The Department of Defense (DoD) and Engineered Resilient Systems (ERS) community seek to improve decision making in the Analysis of Alternatives (AoA) process by incorporating resilience and leveraging the capabilities of model-based engineering (MBE) early in the design process. Traditional tradespace exploration utilizing Point-Based Design (PBD) often converges quickly on a solution with subsequent engineering changes to modify the design. However, this process can lead to a suboptimal solution if an incorrect initial solution is chosen. Enabled by MBE, Set-Based Design (SBD) considers sets of all possible solutions and enables down-selecting possibilities to converge on a final solution. Using a …

A Multi-Objective Affinity-Based Savings Algorithm For Improving Processes In Centralized Warehousing Operations, Mckenlee M. Coco

Graduate Theses and Dissertations

Traditional approaches to improving material management processes in warehousing operations tend to focus on one of three major areas: facility design, order picking and sorting, and order batching. In an effort to improve total system savings, a new affinity function is developed and applied to batching logic to create a multi-objective problem. The proposed multi-objective function incorporates user input to increase adaptability to changing demand and flexibility to changing requirements. Computational experience shows the new function leads to solutions that deviate no more than 25% from the most efficient distance based picking route by the same batching logic, while creating …

Securing Soft Ips Against Hardware Trojan Insertion, Thao Phuong Le

Graduate Theses and Dissertations

Due to the increasing complexity of hardware designs, third-party hardware Intellectual Property (IP) blocks are often incorporated in order to alleviate the burden on hardware designers. However, the prevalence use of third-party IPs has raised security concerns such as Trojans inserted by attackers. Hardware Trojans in these soft IPs are extremely difficult to detect through functional testing and no single detection methodology has been able to completely address this issue. Based on a Register-Transfer Level (RTL) and gate-level soft IP analysis method named Structural Checking, this dissertation presents a hardware Trojan detection methodology and tool by detailing the implementation of …

Essays On Applications Of Transportation Network Design And Optimization, Amirali Ghaharikermani

Graduate Theses and Dissertations

In this dissertation, we address different transportation problems. The three main outcomes are: designing a battery swap station network, studying gaps in Empty Container Management literature, designing a model with similar characteristics to the vehicle routing problem as well as implementation scenario for it to be applied for a real-world case.

For the designed battery swap station, a model is developed for customer demand satisfaction that permits construction of different types of BSS in the planning network. Our solution methodology is a Tabu Search algorithm combined with a dynamic programming initialization. Numerous tests showed that the proposed TS approach provides …

Immunostimulatory Effects Of Antigen-Conjugated Inp/Zns Quantum Dot Nanoparticles In An Avian Model, Christopher Lyle

Graduate Theses and Dissertations

Due to their unique physicochemical and enhanced immunostimulatory properties, quantum dot (QD) nanoparticles have shown increasing promise in biomedical research applications including bioimaging, drug delivery, and as vaccine adjuvants. Toxicity, however, remains a concern for the use of QD in these applications and thus, there is an increased demand for effective in vitro and in vivo systems to measure the bioactivity of QD. In this study in vitro and in vivo chicken models were used to investigate the effects of QD on innate and adaptive immunity. Chicken macrophage cultures were treated in vitro with QD to measure macrophage activation and …

Convergent Set-Based Design In Integrated Analysis Of Alternatives: Designing Engineered Resilient Systems, Zephan Wright Wade

Graduate Theses and Dissertations

This thesis presents a comprehensive package for understanding and expanding set-based design quantification through the definition and demonstration of Convergent set-based design (SBD). Convergent SBD is a technique developed for the Engineered Resilient Systems program sponsored by the Department of Defense. Convergent SBD contributes a repeatable methodology with the goal of mathematically eliminating inefficient sets. The study of Convergent SBD led to the development of dominance identification criteria equations using comparison of statistical means. The demonstration of Convergent SBD also illustrates the effect of mission resilience in the tradespace and the impact mission resilience has on preference. Finally, Convergent SBD …

Phase Transitions In Monochalcogenide Monolayers, Mehrshad Mehboudi

Graduate Theses and Dissertations

Since discovery of graphene in 2004 as a truly one-atom-thick material with extraordinary mechanical and electronic properties, researchers successfully predicted and synthesized many other two-dimensional materials such as transition metal dichalcogenides (TMDCs) and monochalcogenide monolayers (MMs). Graphene has a non-degenerate structural ground state that is key to its stability at room temperature. However, group IV monochalcogenides such as monolayers of SnSe, and GeSe have a fourfold degenerate ground state. This degeneracy in ground state can lead to structural instability, disorder, and phase transition in finite temperature. The energy that is required to overcome from one degenerate ground state to another …

Understanding The Evolution Of Surface Texture Under Boundary Lubrication, Salil T. Bapat

Graduate Theses and Dissertations

The objective of this research was to understand the evolution of surface texture under boundary/mixed lubrication (BL). Significant material/energy losses occur during BL because of direct contact between the two surfaces. Traditionally, tribofilms have been studied extensively for BL while textures have been used as a static engineering design parameter to enhance lubricant film properties. However, texture is dynamic at the tribological mating interface, where both physical and chemical interactions are continuously modulated. The evolution and the interplay between the tribofilm and texture is least studied in the literature, which is the focus of this research.

MoS2-based lubricants, known for …

Characterization Of Bacteriorhodopsin And Halorhodopsin Reconstituted In Lipid Bilayer Membranes, Joel Domkam Kamwa

Graduate Theses and Dissertations

Motivated to produce electricity with photon activated ion pumps, the main purpose of this work was to characterize the photosynthetic membrane proteins bacteriorhodopsin (proton pump) and halorhodopsin (chloride pump). The proteins were re-suspended in lipid bilayers. For this work, an experimental set-up was built which included: chambers for lipid bilayer formation and characterization, lasers for ion pump activation, and an AxoPatch electrophysiology system for small photocurrent measurement. Lipid bilayer membranes were formed using mostly folding method: folding two monolayers together. The membranes were characterized by their resistance, capacitance, and generated photocurrent. Photocurrent was generated upon illumination of lipid-protein membranes with …

Dispensing Medical Countermeasures In Public Health Emergencies Via Home Health Agencies And Points Of Distribution, Anna Hudgeons

Industrial Engineering Undergraduate Honors Theses

A major concern regarding emergency preparedness on the state government level involves the handling and dispensing of the Strategic National Stockpile (SNS) of medicinal supplies. Each state is required to update and maintain a plan of action for dispensing SNS materials that would effectively provide care to the state’s population in times of distress. This research evaluates a state’s ability to dispense an adequate amount of medicine to her population in a timely manner, specifically after it has been received by the state government. Although simulation modeling has previously been utilized to replicate the dispensing process at pre-designated points of …

Modeling Commodity Flow As A Statistical Function Of Lock Unavailability And Usage, Grace Mcgee

Industrial Engineering Undergraduate Honors Theses

The inland waterway system in the United States allows for the transportation of commodities, and interruptions to the system can have remarkable economic consequences. This research estimates statistical models of commodity flow as a function of lock usage and lock unavailability to discover relationships between system disruption and economic penalties. Findings specifically complement a portfolio of research conducted by the Maritime Transportation Research & Education Center (MarTREC) for the United States Army Corps of Engineers (USACE) to aid in decision making and resource planning for lock maintenance.

Transportation And Distribution Of Strategic National Stockpile Supplies In A Public Health Emergency, Olivia A. Goss

Industrial Engineering Undergraduate Honors Theses

In the event of a public health emergency in the United States, it is important that public

authorities are equipped to distribute medical supplies to every person in need as quickly as

possible. Federal guidelines state that all persons in an area affected by a public health

emergency should receive their medical countermeasures within 48 hours of the emergency’s

declaration. While the CDC has determined a general dispensing plan for each state and county

to follow, it is ultimately up to the state and county to formalize and implement detailed plans.

A body of academic literature focuses on optimizing the …

Effects Of Hydration And Mineralization On The Mechanical Behavior Of Collagen Fibrils, Marco Fielder

Graduate Theses and Dissertations

Bone is a composite biomaterial with a structural load-bearing function. Understanding the biomechanics of bone is important for characterizing factors such as age, trauma, or disease, and in the development of scaffolds for tissue engineering and bioinspired materials. At the nanoscale, bone is primarily composed of collagen protein, apatite crystals, and water. Though several studies have characterized nanoscale bone mechanics as the mineral content changes, the effect of water, mineral, and carbon nanotube (CNT) content and distribution in fibril gap and overlap regions is unexplored. This study used molecular dynamics to investigate the change in collagen fibril deformation mechanisms as …

Novel Methodology For Emboli Analog Production And In-Vitro Simulation Of Acute Ischemic Stroke, Anne Preut

Graduate Theses and Dissertations

Stroke is the leading cause of disability and a primary cause of mortality, resulting in an estimated $33 billion dollars spent on healthcare, rehabilitation and lost productivity in the United States each year. The most prevalent cause of stroke incidents are acute ischemic events, manifested as blood clots in the vasculature supplying the brain. Current gold standard treatments have improved since 2006 with the introduction of mechanical stent retrievers; however, several issues with the current treatments to acute ischemic stroke remain. Thrombolysis of the clot with a tissue plasminogen activator may lead to weakening the vessel wall and consequently, hemorrhaging. …

Lithium And The Foreseeable Future, Paolo Vargas

Mechanical Engineering Undergraduate Honors Theses

This paper aims to clarify the uncertainties regarding worldwide lithium resource availability in the years to come. Previous studies made on the subject are presented with some ambiguity and this work intends to fill the gaps. The information and data presented throughout this script with respect to global lithium resources and reserves are mostly based on data released by the United States Geological Survey (USGS). Lithium resource availability in the future is a point of paramount significance primarily for the automotive, portable electronics, and the power generation industry. Since, a change of supply would ultimately affect the price of lithium, …

A Nanoindentation Study Of The Fatigue Properties Of Al/A-Si Core-Shell Nanostructures, Jason Steck

Mechanical Engineering Undergraduate Honors Theses

Nanostructure-textured surfaces can reduce friction and increase the reliability of micro- and nanoelectromechanical systems (NEMS/MEMS). For MEMS incorporating moving parts, the fatigue properties of nanostructures pose a challenge to their reliability in long-term applications. In this study, the fatigue behavior of hemispherical Al/a-Si core-shell nanostructures (CSNs), bare hemispherical Al nanodots, and a flat Al/a-Si layered thin film have been studied using nanoindentation and nano-scale dynamic mechanical analysis (nano-DMA) techniques. Fatigue testing with nano-DMA shows that the deformation resistance of CSNs persists through 5.0 × 10⁴ loading cycles at estimated contact pressures greater than 15 GPa. When the a-Si shell …