Engineering Commons^™

Evaluating The Practices Of A Small Business: A Case Study, Madeleine Anne Bernadicou

Construction Management

Companies are in constant search to increase profits. The company success is dependent on its standard operational procedures, otherwise known as SOP. Golden State Irrigation and Noack Pump is a non-union merit shop contractor that performs irrigation work in the California’s central valley. This paper researches the utilized methods of the company to see if it is operating at an optimal level. The methodology used in this project is a case study, where multiple jobs, income statements, and cash flows were analyzed, along with conducted interviews. Both qualitative and quantitative data were collected in the investigation of this case study. …

Worker Activity Recognition In Smart Manufacturing Using Imu And Semg Signals With Convolutional Neural Networks, Wenjin Tao, Ze-Hao Lai, Ming-Chuan Leu, Zhaozheng Yin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In a smart manufacturing system involving workers, recognition of the worker's activity can be used for quantification and evaluation of the worker's performance, as well as to provide onsite instructions with augmented reality. In this paper, we propose a method for activity recognition using Inertial Measurement Unit (IMU) and surface electromyography (sEMG) signals obtained from a Myo armband. The raw 10-channel IMU signals are stacked to form a signal image. This image is transformed into an activity image by applying Discrete Fourier Transformation (DFT) and then fed into a Convolutional Neural Network (CNN) for feature extraction, resulting in a high-level …

Urinalysis Screening For Rural Communities, Dana Bren-Cardali, Lilian Dao, Jeffrey Destruel, Ryan Fernandez

Interdisciplinary Design Senior Theses

Access to medical care and health screenings is a necessity for patients around the globe, but it can be difficult to provide this without screenings becoming costly or convoluted. In rural and underdeveloped areas, patients are often disadvantaged when it comes to finding reliable and affordable healthcare. The isolation provided by their location and the rising costs of physicians makes it impossible for most impoverished communities to attain personalized care. Because of this, treatable diseases often go unaddressed, allowing diseases to progress to a critical condition. Mortality rates have shown to be higher in communities located in rural areas and …

The Human Keyboard, Derek Char, Thomas Chung, Alexander Mckee, Allen Pai

Interdisciplinary Design Senior Theses

Most products that implement features for user interactions utilize buttons or switches for the user to command to select actions to perform. Such designs are typically controlled with direct motions, such as touch or voice and are seldom designed in consideration of those unable to utilize direct control. In this project, we designed technology that reads naturally occuring biosignals from the body, which then can be apply those signals with any interface. For our specific application in this project, we decided to implement a keyboard. Instead of teaching the fingers how to type on a mechanical keyboard, the body can …

Inter Process Communication Between Two Servers Using Mpich, Nagabhavana Narla

Electronic Theses, Projects, and Dissertations

The main aim of the project is to launch multiple processes and have those processes communicate with each other using peer to peer communication to eliminate the problems of multiple processes running on a single server, and multiple processes running on inhomogeneous servers as well as the problems of scalability. This entire process is done using MPICH which is a high performance and portable implementation of Message Passing Interface standard.

The project involves setting up the passwordless authentication between two local servers with the help of SSH connection. By establishing a peer to peer communication and by using a unique …

Book-Hunt! Android Mobile Application Using Indoor Positioning Technology, Sneha Pantam

Electronic Theses, Projects, and Dissertations

Indoor Positioning System (IPS) focuses on locating objects inside

Buildings. Till date, GPS has helped us obtain accurate locations outdoors. These locations have helped us in many ways like navigating to a destination point, tracking people etc. Indoor Positioning System aims at navigating and tracking objects inside buildings. [1] IndoorAtlas is a technology that works on the theory of Indoor Positioning System. Book-Hunt is an Android mobile application which majorly makes use of IndoorAtlas therefore making use of the technique of indoor tracking. This Android mobile application is designed for Libraries. It is designed specifically for John M. Pfau Library, …

Leave The Features: Take The Cannoli, Jonathan Joseph Catanio

Master's Theses

Programming languages like Python, JavaScript, and Ruby are becoming increasingly popular due to their dynamic capabilities. These languages are often much easier to learn than other, statically type checked, languages such as C++ or Rust. Unfortunately, these dynamic languages come at the cost of losing compile-time optimizations. Python is arguably the most popular language for data scientists and researchers in the artificial intelligence and machine learning communities. As this research becomes increasingly popular, and the problems these researchers face become increasingly computationally expensive, questions are being raised about the performance of languages like Python. Language features found in Python, more …

Composite Bending-Dominated Hollow Nanolattices: A Stiff, Cyclable Mechanical Metamaterial, Biwei Deng, Rong Xu, Kejie Zhao, Yongfeng Lu, Sabyasachi Ganguli, Gary J. Cheng

Department of Electrical and Computer Engineering: Faculty Publications

Manufacturing ultralight and mechanical reliable materials has been a long-time challenge. Ceramicbased mechanical metamaterials provide significant opportunities to reverse their brittle nature and unstable mechanical properties and have great potential as strong, ultralight, and ultrastiff materials. However, the failure of ceramics nanolattice and degradation of strength/modulus with decreasing density are caused by buckling of the struts and failure of the nodes within the nanolattices, especially during cyclic loading. Here, we explore a new class of 3D ceramic-based metamaterials with a high strength–density ratio, stiffness, recoverability, cyclability, and optimal scaling factor. Deformation mode of the fabricated nanolattices has been engineered through …

Tradeoffs In Model Performance And Effort For Long-Term Phosphorus Leaching Based On In Situ Field Data, Ryan P. Freiberger, Derek M. Heeren, Dean E. Eisenhauer, Aaron R. Mittelstet, Guillermo Baigorria

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Phosphorus and N are critical nutrients for agriculture but are also responsible for surface water enrichment that leads to toxic algal growth. Although P loading to surface waters has traditionally been thought to occur primarily in surface runoff, contributions from subsurface transport can also be significant. The primary objectives of this research were to evaluate several methods of representing macropore flow and transport in a finite element model using plot-scale infiltration and leaching data and to compare several models of various levels of complexity to simulate long-term P leaching. To determine flow and transport parameters, single- and dual-porosity models in …

Portable Flux Tower Deployments Field Campaign Report, M. S. Torn, L Kuepper, S. C. Biraud, D. P. Billesbach

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Contents

Acronyms and Abbreviations...................................................................... iii

1.0 Summary ....................................................... 1

2.0 Results ........................................... 1

3.0 Publications and References ................................................. 2

4.0 Lessons Learned .................................................................... 2

3-D Reconstructions And Numerical Simulations Of Precarious Rocks In Southern California, Christine E. Wittich, Tara C. Hutchinson, J. Desanto, D. Sandwell

Department of Civil and Environmental Engineering: Faculty Publications

Reliable estimates of seismic hazard are essential for the development of resilient communities; however, estimates of rare, yet high intensity earthquakes are highly uncertain due to a lack of observations and recordings. Lacking this data, seismic hazard analyses may be based on extrapolations from earthquakes with more moderate return periods, which can lead to physically unrealistic earthquake scenarios. However, the existence of certain precariously balanced rocks (PBRs) has been identified as an indicator of an upper bound ground motion, which precludes toppling of the balanced rock, over its lifetime. To this end, a survey of PBRs was conducted in proximity …

Smart Espresso Machine, Hasham Ali, Justin L'Heureux, Hayden Yeung, Pei Hang Zhang

Electrical Engineering

With the recent “Internet of Things” trend, more and more home devices are connected to the Internet. Smart light bulbs, smart thermostats, smart door locks; just to name a few. These smart appliances enable users to view their status and control their settings remotely with just a few clicks on the smartphone. Moreover, the arrival of intelligent personal voice assistants such as Amazon Alexa revolutionized how users interact with these smart appliances. Nowadays, users are able to control these devices by just speaking.

If controlling smart devices is so easy, why not have your morning cup of joe be that …

Identifying Prevalent Mathematical Pathways To Engineering In South Carolina, Eliza Gallagher, Christy Brown, D. Andrew Brown, Kristin Kelly Frady, Patrick Bass, Michael A. Matthews, Thomas T. Peters, Robert J. Rabb, Ikhalfani Solan, Ronald W. Welch, Anand K. Gramopadhye

Faculty Publications

National data indicate that initial mathematics course placement in college is a strong predictor of persistence to degree in engineering, with students placed in calculus persisting at nearly twice the rate of those placed below calculus. Within the state of South Carolina, approximately 95% of engineering-intending students who initially place below calculus are from in-state. In order to make systemic change, we are first analyzing system-wide data to identify prevalent educational pathways within the state, and the mathematical milestones along those pathways taken by students in engineering and engineering-related fields. This paper reports preliminary analysis of that data to understand …

Introduction Of Mechatronics Specialization Through Concentration Areas In The Mechanical And Electrical Engineering Technology Programs, Otilia Popescu, Vukica M. Jovanovic, Sanjeevi Chitikeshi, Isaac L. Flory Iv

Engineering Technology Faculty Publications

The last few decades have experienced an explosion of technology, both in industry and in customer products. A large variety of embedded systems from various areas of applications, digital electronics, internet of things, automatically controlled products, and ultimately mechatronics systems are part of the everyday life. The changes in the industries, consumer markets and implicitly in the job markets, impose changes in the academic programs and curricula. Recently, mechatronics undergraduate programs started being developed in 2 or 4 years colleges across the nation, mainly driven by international companies operating in countries that already offer mechatronics degrees ranging from high school …

Advancing The Engineering Field: Opportunities To Support Transfer Students, Vukica M. Jovanovic, Narketta Sparkman-Key, Konstantin P. Cigularov, Daniela Cigularova, Bonita G. Anthony, Otilia Popescu

Engineering Technology Faculty Publications

Advancements in technology have made it vital that technicians advance their skills to stay current and competitive in the job market. Many technicians choose to transfer to baccalaureate programs in engineering and other STEM fields in order to advance their skills. As a result, engineering programs usually have a large population of transfer students. Many of transfer students are studying while employed in the field and some juggle a career and family while advancing their education. Accordingly, transfer students face various issues when transferring to different university settings. Some of these issues are related to embeddedness into the university community …

Lessons From Two Years Of Eportfolio Implementation In Engineering Technology Courses, Orlando M. Ayala, Otilia Popescu

Engineering Technology Faculty Publications

In an undergraduate as well as in a graduate academic setting, an ePortfolio is a collection of student work designed to exhibit student’s achievements, which often includes student’s reflective commentaries. While in academia ePortfolios are used to document the student learning process over time, they have been also well received by employers as work portfolios or showcases. This paper provides detailed explanations of two years of implementation of ePortfolio activities in junior and senior level engineering technology courses. The goal of the paper is to present to the community the best practices learned during the implementation and to provide information …

Dimensionality's Blessing: Clustering Images By Underlying Distribution, Wen-Yan Lin, Jian-Huang Lai, Siying Liu, Yasuyuki Matsushita

Research Collection School Of Computing and Information Systems

Many high dimensional vector distances tend to a constant. This is typically considered a negative “contrastloss” phenomenon that hinders clustering and other machine learning techniques. We reinterpret “contrast-loss” as a blessing. Re-deriving “contrast-loss” using the law of large numbers, we show it results in a distribution’s instances concentrating on a thin “hyper-shell”. The hollow center means apparently chaotically overlapping distributions are actually intrinsically separable. We use this to develop distribution-clustering, an elegant algorithm for grouping of data points by their (unknown) underlying distribution. Distribution-clustering, creates notably clean clusters from raw unlabeled data, estimates the number of clusters for itself and …

Empath-D: Vr-Based Empathetic App Design For Accessibility, Wonjung Kim, Kenny Tsu Wei Choo, Youngki Lee, Archan Misra, Rajesh Krishna Balan

Research Collection School Of Computing and Information Systems

With app-based interaction increasingly permeating all aspects of daily living, it is essential to ensure that apps are designed to be inclusive and are usable by a wider audience such as the elderly, with various impairments (e.g., visual, audio and motor). We propose Empath-D, a system that fosters empathetic design, by allowing app designers, in-situ, to rapidly evaluate the usability of their apps, from the perspective of impaired users. To provide a truly authentic experience, Empath-D carefully orchestrates the interaction between a smartphone and a VR device, allowing the user to experience simulated impairments in a virtual world while interacting …

Reserved Optimisation: Handling Incident Priorities In Emergency Response Systems, Muralidhar Konda, Supriyo Ghosh, Pradeep Varakantham

Research Collection School Of Computing and Information Systems

Emergency (medical, fire or criminal) Management Systems(EMSs) are crucial for ensuring public safety and security. Typically in many cities, less than 20% of the cases received by EMSs belong to the extremely serious category and require immediate help. Rest of the incidents typically are less serious and thereby allow more flexibility in response time. Therefore, for efficient management of EMS requests, several EMSs now categorise an incoming emergency request into apriority level based on well studied “triaging” methods. Leading research on optimising emergency response has either focussed on data-driven models for settings with homogenous incidents or on generic heuristics (that …

Instance-Specific Selection Of Aos Methods For Solving Combinatorial Optimisation Problems Via Neural Networks, Teck Hou (Deng Dehao) Teng, Hoong Chuin Lau, Aldy Gunawan

Research Collection School Of Computing and Information Systems

Solving combinatorial optimization problems using a fixed set of operators has been known to produce poor quality solutions. Thus, adaptive operator selection (AOS) methods have been proposed. But, despite such effort, challenges such as the choice of suitable AOS method and configuring it correctly for given specific problem instances remain. To overcome these challenges, this work proposes a novel approach known as I-AOS-DOE to perform Instance-specific selection of AOS methods prior to evolutionary search. Furthermore, to configure the AOS methods for the respective problem instances, we apply a Design of Experiment (DOE) technique to determine promising regions of parameter values …

Bounded Rank Optimization For Effective And Efficient Emergency Response, Pallavi Madhusudan Manohar, Pradeep Varakantham, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Effective placement of emergency response vehicles (such as ambulances, fire trucks, police cars) to deal with medical, fire or criminal activities can reduce the incident response time by few seconds, which in turn can potentially save a human life. Owing to its adoption in Emergency Medical Services (EMSs) worldwide, existing research on improving emergency response has focused on optimizing the objective of bounded time (i.e. number of incidents served in a fixed time). Due to the dependence of this objective on temporal uncertainty, optimizing the bounded time objective is challenging. In this paper, we propose a new objective referred to …

Cost Model Evaluation For Large Scale Additive Manufacturing, Andrea Piazza

Theses and Dissertations

Additive manufacturing (AM) is becoming a valuable option in medium to large scale manufacturing operations, due to the increasing technological advances and popularization of different techniques. Product development assembly costs can be greatly reduced with additive manufacturing, producing directly consumer-usable parts without the need of always rising labor costs. Entry level companies can bridge the gap between Tier 1 suppliers and Research & Development (R&D) businesses by utilizing the lower capital and reoccurring costs of modern additive manufacturing techniques, thereby avoiding the necessity for retooling and specialized machinery. The following study both explores the advantages and quantifies the cost factors, …

Effects Of Head Formation And Heat Treatment On The Mechanical Properties Of Connecting Rod Bolts, Caleb A. Leavitt, Matthew R. Lauretta

Materials Engineering

Oliver Racing Parts (ORP; Charlevoix, Michigan) is looking to optimize their manufacturing process for high-strength connecting rod bolts. A high yield strength is desired for the bolts because deformation would result in catastrophic engine failure. The bolts were made of H11, a chromium hot-work tool steel; and MLX17, a precipitation hardenable stainless steel. Tensile testing was performed to determine the tensile and yield strengths of the bolts. Fracture surfaces were imaged via scanning electron microscopy to characterize the failure modes. To observe the effects of bolt heading on microstructure and bolt strength, two batches of MLX17 were prepared; one batch …

Analysis Of The Low-Cycle Fatigue Behavior Of Silicone Rubber For Biomedical Balloons, Chase Cooper

Materials Engineering

The development of a medical drug delivery device that allows for the deployment drugs into the adventitial tissue of blood vessels requires the inflation of a silicone elastomer. The inflated silicone must be able to consistently endure multiple loading cycles without failing so that the device can operate reliably. There are multiple methods of processing the silicone for the device and the goal of this study is to examine the effect of the various processing methods on the characteristics of the silicone. The Dynamic Mechanical Analysis Machine (DMA) is used to model the conditions of the device’s application by performing …

Development Of Low Cost, Environmentally Friendly And High Strength Carbon Foams From Bread And Cake, Laura Mountain-Tuller

Materials Engineering

Carbon foam is a high niche material that consists of a highly porous, three-dimensional cellular network that is characterized by extremely high strength-to-weight ratios and low thermal conductivity. Due to these properties, carbon foams excel in structural and thermal applications, especially in the aerospace industry. Typically, carbon foams are formed through a heating process called pyrolysis of polymer precursors with high carbon content. This process is done at high temperatures in an oxygen free environment. These precursors are expensive to make and use toxic chemicals to produce, therefore, there is a push to find an environmentally friendly and cost-effective method …

Shyh Wang Hall- Lbnl Building 59, Mike Torkelson

Fire Protection Engineering: Culminating Experience Project Reports

This report details the fire and life safety analysis of Shyh Wang Hall, a new building at the Lawrence Berkeley National Laboratory. Wang Hall houses offices, high performance computers, and associated mechanical space. The building is constructed as a Type IIB structure and includes four stories. Both prescriptive-based and performance-based design is considered.

The prescriptive analysis considers the fire and life safety features as required by applicable codes, including the Department of Energy requirements. The building is protected by fire detection and alarm system as well as automatic sprinklers. The prescriptive design meets the code requirements with the possible exception …

Life Safety And Fire Analysis - Aircraft Hangar, Frederick J. Tanis Jr.

Fire Protection Engineering: Culminating Experience Project Reports

A hangar originally built in 1958 then modified and expanded over the years was evaluated using both the prescriptive requirements and a performance analysis. For the prescriptive analysis the building was evaluated against the 2015 International Building Code and the current NFPA codes and in a few cases the Department of Defense (DoD) Unified Facilities Criteria (UFC). During the prescriptive analysis a few areas were identified that do not meet the current codes due to areas being broken up into separate rooms and hallways and rooms being separated by security doors that only allow unobstructed travel in one direction. These …

Warren J. Baker Center For Science And Mathematics (Csm)- Fire Protection Analysis, Neal Larsen

Fire Protection Engineering: Culminating Experience Project Reports

Analyzing the fire protection features of the Warren J. Baker Center for Science and Mathematics Building 180, located on Cal Poly Campus in San Luis Obispo California was done using two methods. The prescriptive based analysis of the building focused on the building design, egress, structural fire protection, fire suppression, fire alarm and detection systems to determine if current codes and standards were meet. The performance based analysis discusses certain methods and design fire scenarios that are present within the building and the building’s ability to protect occupants until they can exit safely. The performance based analysis was done using …

General Purpose Laboratory Building 33- Lawrence Berkeley National Laboratory, Nicholas Tran

Fire Protection Engineering: Culminating Experience Project Reports

A detailed study of the fire and life safety systems in the General Purpose Laboratory at the Lawrence Berkeley National Laboratory was performed. The prescriptive and performance-based methods for fire and life safety requirements were analyzed in accordance with the applicable codes. The prescriptive items examined included the egress capacities, fire suppression systems, fire detection and notification systems, and structural construction requirements. The performance-based models utilized studied fire growth and its impact on the fire suppression systems as well as time to egress for the occupants. The General Purpose Laboratory was found to be compliant with the prescriptive requirements in …

A Basic, Four Logic Cluster, Disjoint Switch Connected Fpga Architecture, Joseph Prachar

Computer Engineering

This paper seeks to describe the process of developing a new FPGA architecture from nothing, both in terms of knowledge about FPGAs and in initial design material. Specifically, this project set out to design an FPGA architecture which can implement a simple state machine type design with 10 inputs, 10 outputs and 10 states. The open source Verilog-to-Routing FPGA CAD flow tool was used in order to synthesize, place, and route HDL files onto the architecture. This project was completed in terms of the spirit of the original goals of implementing an FPGA from scratch. Although, the project resulted in …