Engineering Commons^™

Molybdenum Disulfide-Conducting Polymer Composite Structures For Electrochemical Biosensor Applications, Hongxiang Jia

USF Tampa Graduate Theses and Dissertations

Lactic acid is widely existing in human bodies, animals and microorganisms. Recently, using biosensor to detect the concentration of lactic acid and diagnose disease have attracted great research and development interests. Nanocomposites is one of the best material used for biosensor because their wonderful conductivity, optical and electrochemical properties. In the study, MoS₂ and polypyrrole (PPY) are used for the composite material electrode. To determine whether lactate oxidase (LOD) was helpful for the biosensor’s detective properties, both PPY-MoS₂ film with LOD and PPY-MoS₂ film without LOD are being tested. The fourier transform infrared spectroscopy (FTIR) and Raman …

Mechanistic Investigation Toward A Microkinetic Model For Decarboxylation Of Gamma Valerolactone Over Silica Alumina, Christian Suhngwa Jungong

Theses - ALL

γ-valerolactone (GVL) ring opening- and decarboxylation rates were measured over amorphous silica alumina (SiO2/Al2O3) catalyst in the gas phase, using a down configuration fixed bed reactor, operating under anhydrous and differential conditions. By varying temperature, space time and GVL partial pressure, measured rates were leveraged to determine kinetic parameters (apparent activation barriers and pre-exponential factors) for the ring opening and decarboxylation step, as well as thermodynamic parameters (enthalpy- and entropy of reaction) for the ring opening step. The experimentally measured parameters were applied for the development of a microkinetic model that quantitatively describes the overall kinetics involved in the decarboxylation …

A Study Of Scattering From A Layer Of Random Discrete Medium With Hierarchical Equivalent Source Algorithm (Hesa), Chan Fai Lum, Fu Xin, Hong Tat Ewe, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

This paper is to present a new numerical method which can be used in computational electromagnetics in microwave remote sensing of random discrete medium embedded with irregular shape of scatterers. Current Radiative Transfer (RT) theoretical modeling is normally used to simulate wave propagation in the medium and wave scattering by basic shapes of scatterers, e.g., cylinder, disk, needle or sphere where the scattering of those scatterers was normally derived analytically with some assumption and approximation. To simulate the total backscattering coefficient from a layer of random medium, traditionally it was quite common that Mie phase matrix was used to compute …

Simulation And Verification Of Fluid Jet Polishing, Senmiao Hu

USF Tampa Graduate Theses and Dissertations

Fluid jet polishing (FJP) is a new advanced polishing technology that finds applications in many industries, especially in the optics industry. With the broad application of various surfaces in optics, the sub-micrometric scale and the nanometric surface roughness accuracy are major challenges. Fluid jet polishing is a technology developed from abrasive water jet machining. This technology is a water jet cutting technology, which uses high-pressure flow to cut/remove materials.

In this thesis, the working principle, and simulations, as well as verification of fluid jet polishing are thoroughly investigated. The verification of fluid jet polishing in this thesis includes velocity distribution …

Wearable Imu For Shoulder Injury Prevention In Overhead Sports, Samir A. Rawashdeh, Derek A. Rafeldt, Timothy L. Uhl

Physical Therapy Faculty Publications

Body-worn inertial sensors have enabled motion capture outside of the laboratory setting. In this work, an inertial measurement unit was attached to the upper arm to track and discriminate between shoulder motion gestures in order to help prevent shoulder over-use injuries in athletics through real-time preventative feedback. We present a detection and classification approach that can be used to count the number of times certain motion gestures occur. The application presented involves tracking baseball throws and volleyball serves, which are common overhead movements that can lead to shoulder and elbow overuse injuries. Eleven subjects are recruited to collect training, testing, …

Synthesis, Characterization, And Application Of Monosized Mesoporous Silica Nanoparticle-Supported Lipid Bilayers For Targeted Therapeutic Delivery To Individual Cells, Paul Durfee

Biomedical Engineering ETDs

Mesoporous silica nanoparticle (MSNP) supported-lipid bilayers, termed ‘protocells,’ represent a potentially transformative class of therapeutic and theranostic delivery vehicles. The field of targeted drug delivery poses considerable challenges that cannot be addressed with a single ‘magic bullet’. Consequently, the protocell has been designed as a modular platform composed of interchangeable biocompatible components. The mesoporous silica core can have variable size and shape to direct biodistribution and controlled pore size and surface chemistry to accommodate diverse cargos. The encapsulating supported lipid bilayer can be modified with targeting and trafficking ligands as well as polyethylene glycol (PEG) to effect selective binding, endosomal …

High Power Optically Pumped Semiconductor Lasers For Sodium Guidestar Applications, Shawn W. Hackett

Optical Science and Engineering ETDs

Optically pumped semiconductor lasers (OPSLs) are shown to provide a much more compact and less expensive source for illumination of the sodium layer of the mesosphere for use as a sodium laser guidestar via single and two photon excitation schemes. This represents a revolution in laser guidestar technology as the cost, size, and power requirements for a laser guidestar system are shown to have been decreased by an order of magnitude with guidestar performance shown to be similar to previous sources. Sodium laser guidestar sources for broadband simultaneous illumination of multiple lines are developed and simulated. Simulations are then compared …

Mechanistic Investigation Toward A Microkinetic Model For Decarboxylation Of Gamma Valerolactone Over Silica Alumina, Christian Suhngwa Jungong

Theses - ALL

γ-valerolactone (GVL) ring opening- and decarboxylation rates were measured over amorphous silica alumina (SiO2/Al2O3) catalyst in the gas phase, using a down configuration fixed bed reactor, operating under anhydrous and differential conditions. By varying temperature, space time and GVL partial pressure, measured rates were leveraged to determine kinetic parameters (apparent activation barriers and pre-exponential factors) for the ring opening and decarboxylation step, as well as thermodynamic parameters (enthalpy- and entropy of reaction) for the ring opening step. The experimentally measured parameters were applied for the development of a microkinetic model that quantitatively describes the overall kinetics involved in the decarboxylation …

Applying The Technology Acceptance Model To Understand Aviation Students’ Perceptions Toward Augmented Reality Maintenance Training Instruction, Yu Wang, Amadou Anne, Tim Ropp

International Journal of Aviation, Aeronautics, and Aerospace

Augmented Reality (AR) Technology, since its inception, has been enhanced significantly by software and hardware developers, and has been widely utilized in various fields such as manufacturing, entertainment, architecture, commerce and education. In recent years, maintenance instructions developed on the basis of AR technology have demonstrated their potential to positively impact maintenance training and technical tasks in aviation. Features of AR maintenance instructions include interactive content, user-friendly operation interface, enhanced visualization and real-time data feeds. The researchers conducted a case study of forty-one aviation maintenance students at a Midwestern university. The purpose of this study was twofold: to evaluate the …

Pepper Mild Mottle Virus As A Surrogate For Enteric Viruses: Implications For Assessing Water Quality, Erin Michelle Symonds

USF Tampa Graduate Theses and Dissertations

Less than 10% of the world’s domestic wastewater is disinfected prior to discharge into surface waters; therefore, human exposure to diverse wastewater-related pathogens results in millions of cases of illness each year. Among the enteric pathogens, viruses represent an important group of emerging pathogens and are frequently the cause of food- and water-borne outbreaks of illness. Although the World Health Organization and many government agencies mandate the use of bacterial indicators to identify poor microbial water quality, it is well known that these indicators poorly correlate with fecal pollution contamination events and risk of disease. The field of public health-related …

Formation Of Trihalomethanes (Thms) As Disinfection By-Products (Dbps) When Treated Municipal Wastewater Is Disinfected With Sodium Hypochlorite, Helene Kassouf

USF Tampa Graduate Theses and Dissertations

Disinfection is an essential process in the treatment of municipal wastewater before the treated wastewater can be discharged to the environment. Hillsborough County's Northwest Regional Water Reclamation Facility (NWRWRF) in Tampa, Florida, currently uses ultraviolet (UV) light for disinfection. However, this method has proven expensive to implement and maintain, and may not be effective if the light transmission is poor. For these reasons, Hillsborough County is considering switching from UV light to sodium hypochlorite for disinfection. However, hypochlorite (chlorine) disinfection has disadvantages as well, such as the production of disinfection by-products (DBPs) such as trihalomethanes (THM) and haloacetic acids (HAAs), …

Cracking Potential And Temperature Sensitivity Of Metakaolin Concrete, Andrew Robert Williams

USF Tampa Graduate Theses and Dissertations

Metakaolin is a pozzolanic material with the potential to reduce permeability and chloride ingress; however, quantification of the effects of metakaolin use on the cracking sensitivity of concrete mixtures is needed to ensure that these improvements in performance are not compromised. This study was conducted to investigate the early age cracking potential due to restraint stresses from incorporating metakaolin in concrete. Calorimetry testing showed that metakaolin was more sensitive to temperature than mixtures with only Portland cement. Results showed more shrinkage, less stress relaxation, and higher restraint stress from the inclusion of metakaolin, potentially increasing cracking sensitivity of mixtures.

^{1 …}

Corrosion Characteristics Of Magnesium Under Varying Surface Roughness Conditions, Yahya Efe Yayoglu

USF Tampa Graduate Theses and Dissertations

The biggest challenge with magnesium alloy biodegradable implants is the rapid corrosion at the earlier stages of the healing process after implantation. In this research, the impact of surface roughness generated by different means on the corrosion rate of AZ31 magnesium alloy in a simulated biologic environment is investigated. In order to perform accurate experimentation, an in vitro setup is assembled that simulates the human body environment accurately has been prepared using Schinhammer’s in vitro immersion testing setup and Kokubo’s Simulated Body Fluid (SBF). For the immersion test of Mg in SBF, several surface texture groups of Mg have been …

Designing Fixed-Base Operations Utilizing Systems Engineering Principles, Ross L. Stephenson Jr., David A. Carroll

Journal of Aviation Technology and Engineering

There are currently over 3,200 fixed-base operations (FBOs) conducting business in the United States attempting to meet the demands of FAA Part 91, Part 135, and a limited number of Part 121 operations. With the US economy slowly climbing out of the trough during 2013, the utilization of fixed-base operations has become more attractive and economical to the corporate business and the affluent recreational traveler. Despite the increased flight activities utilizing the services of fixed-base operators, keen competition, rising fuel cost, and the economies of scale recognized by large FBO franchises significantly erode the profitability and sustainability of smaller FBOs. …

The Pop-Up Effect: Why Buoyant Spheres Don’T Always Leap Out Of The Water | College Of Engineering, Usu College Of Engineering

College of Engineering News

News Release – LOGAN, UTAH, Nov. 2, 2016 – It’s a common swimming pool game: Force a buoyant ball underwater and let it go. The ball springs to the surface and jumps into the air. But, submerge the ball deeper underwater and the effect is often disappointing. Contrary to intuition, increasing the release depth often leads to a decreased pop-up height.

Animal, Dairy, And Veterinary Sciences Center For Integrated Biosystems | Biological Engineering, Usu College Of Engineering

College of Engineering News

The goal of my research group is to develop and investigate methods and tools to understand and detect diseases. We currently have 3 research thrusts: modeling subretinal tissue, simulating microgravity and radiative effects on skeletal muscle, and separating and identifying bacteria. We use micropatterning and 2D cultures with spider silk to model normal and diseased layers of the subretina. For our muscle research, we are currently using a rotating cell culture system and Cesium disks to replicate the conditions during spaceflight. To identify mycobacterial strands, we are combining dielectrophoresis with Raman spectroscopy for fast and accurate detection. In each of …

Be Students Attend Bmes Conference | Biological Engineering, Usu College Of Engineering

College of Engineering News

The Biomedical Engineering Society (BMES) is a society of professionals devoted to developing and using engineering and technology to advancing human health and well-being. This year students from the Biological Engineering department at Utah State University attended the annual BMES conference. Here is what one of our students, Ian Wadsworth had to say about the conference.

Right-Hand Side Effect On The Convergence Of Integral Equation Based Systems, Qin S. Liu, Sheng Sun, Weng Cho Chew, Qi I. Dai, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

A study of the right-hand side effect for an iterative solver is presented. The right-hand side determines whether a mode can be excited under certain excitation. Based on the matrix equation system Ā · x = b, different formulations are discussed including the electric field integral equation (EFIE), Calderón preconditioned EFIE with electro-quasi-static problems, and the magnetic integral equation (MFIE) with magneto-quasi-static problems. Detailed spectral analysis shows the importance of the weighted right-hand side effect in both the convergence and accuracy of iterative system.

A Low-Loss Metasurface Antireflection Coating On Dispersive Surface Plasmon Structure, Jiyeon Jeon, Khagendra Bhattarai, Deok-Kee Kim, Jun Oh Kim, Augustine Urbas, Sang Jun Lee, Zahyun Ku, Jiangfeng Zhou

Physics Faculty Publications

Over the years, there has been increasing interest in the integration of metal hole array (MHA) with optoelectronic devices, as a result of enhanced coupling of incident light into the active layer of devices via surface plasmon polariton (SPP) resonances. However, not all incident light contributes to the SPP resonances due to significant reflection loss at the interface between incident medium and MHA. Conventional thin-film antireflection (AR) coating typically does not work well due to non-existing material satisfying the AR condition with strong dispersion of MHA’s effective impedances. We demonstrate a single-layer metasurface AR coating that completely eliminates the refection …

Video Capture And Post-Processing Technique For Approximating 3d Projectile Trajectory, Chase M. Pfeifer, Judith M. Burnfield, Guilherme M. Cesar, Max H. Twedt, Jeff A. Hawks

Department of Mechanical and Materials Engineering: Faculty Publications

In this paper we introduce a low-cost procedure and methodology for markerless projectile tracking in three-dimensional (3D) space. Understanding the 3D trajectory of an object in flight can often be essential in examining variables relating to launch and landing conditions. Many systems exist to track the 3D motion of projectiles but are often constrained by space or the type of object the system can recognize (Qualisys, Göteborg, Sweden; Vicon, Oxford, United Kingdom; Opti-Track, Corvallis, Oregon USA; Motion Analysis, Santa Rosa, California USA; Flight Scope, Orlando, Florida USA). These technologies can also be quite expensive, often costing hundreds of thousand dollars. …

Investigation Into Unmanned Aircraft System Incidents In The National Airspace System, Rohan S. Sharma

International Journal of Aviation, Aeronautics, and Aerospace

With the promulgation of Federal Aviation Regulations for small unmanned aircraft systems, the volume of unmanned flight operations is expected to increase, which demands an analysis of potential hazards to the National Airspace System. Descriptive statistics were used to investigate reports archived in the Aviation Safety Information and Analysis and Sharing system involving unmanned aircraft systems, as well as the FAA UAS Sightings Reports database. The frequency of reports involving airspace violations, and Near Mid-air Collisions by unmanned aircraft systems as well as an analysis of the location, sponsor category, phase of flight, altitude, and airspace type in which the …

Biomarker Detection At Risk Forecasting Level Using Metal-Enhanced Fluorescence Combined With Surface Acoustic Wave, Jun Liu

USF Tampa Graduate Theses and Dissertations

In this paper, metal-enhanced fluorescence (MEF) technique is used to lower the detection limit of carcinoembryonic antigen (CEA) which is able to be utilized in forecasting the risk of having certain kinds of cancers, especially colon and rectal cancer. By incubating silver nanocubes (Ag NCs) on the surface of the chips, the detection limit goes down to below 1ng/mL of CEA. Also, when combining MEF with surface acoustic wave (SAW) devices, the incubation time between antigen and antibody will decrease significantly with the fluorescence signal keeping similar or higher level.

The Effect Of The Antecedent Dry Conditions On Nitrogen Removal For A Modified Bioretention System, Mackenzie Peterson

USF Tampa Graduate Theses and Dissertations

Eutrophication is defined as the ‘over enrichment’ of a water body from nutrients, resulting in uncontrolled growth of primary producers, leading to periods of oxygen depletion from decomposition of the algal organic matter. According to the 2010 Water Infrastructure Needs and Investment (a U.S. Congressional Report), 40% of U.S. water bodies are contaminated with pollutants, including nutrients. Non-point sources of nutrient pollution are a major cause of this reduction in water quality. One way to decrease eutrophication is to manage nutrients found in stormwater runoff, before they reach a receiving water body.

Bioretention cells containing an internal water storage zone …

Evaluation Of Stochastic Particle Dispersion Modeling In Turbulent Round Jets, Guangyuan Sun, John C. Hewson, David O. Lignell

Faculty Publications

ODT (one-dimensional turbulence) simulations of particle-carrier gas interactions are performed in the jet flow configuration. Particles with different diameters are injected onto the centerline of a turbulent air jet. The particles are passive and do not impact the fluid phase. Their radial dispersion and axial velocities are obtained as functions of axial position. The time and length scales of the jet are varied through control of the jet exit velocity and nozzle diameter. Dispersion data at long times of flight for the nozzle diameter (7 mm), particle diameters (60 and 90 µm), and Reynolds numbers (10, 000–30, 000) are …

Formal Performance Guarantees For Behavior-Based Localization Missions, Damian Lyons, Ron Arkin, Shu Jiang, Matt O'Brien, Feng Tang, Peng Tang

Faculty Publications

Abstract— Localization and mapping algorithms can allow a robot to navigate well in an unknown environment. However, whether such algorithms enhance any specific robot mission is currently a matter for empirical validation. In this paper we apply our MissionLab/VIPARS mission design and verification approach to an autonomous robot mission that uses probabilistic localization software.

Two approaches to modeling probabilistic localization for verification are presented: a high-level approach, and a sample-based approach which allows run-time code to be embedded in verification. Verification and experimental validation results are presented for two different missions, each using each method, demonstrating the accuracy …

Lipid Coated Microbubbles And Low Intensity Pulsed Ultrasound Enhance Chondrogenesis Of Human Mesenchymal Stem Cells In 3d Printed Scaffolds, Mitra Aliabouzar, Lijie Grace Zhang, Kausik Sarkar

Medicine Faculty Publications

Lipid-coated microbubbles are used to enhance ultrasound imaging and drug delivery. Here we apply these microbubbles along with low intensity pulsed ultrasound (LIPUS) for the first time to enhance proliferation and chondrogenic differentiation of human mesenchymal stem cells (hMSCs) in a 3D printed poly-(ethylene glycol)-diacrylate (PEG-DA) hydrogel scaffold. The hMSC proliferation increased up to 40% after 5 days of culture in the presence of 0.5% (v/v) microbubbles and LIPUS in contrast to 18% with LIPUS alone. We systematically varied the acoustic excitation parameters—excitation intensity, frequency and duty cycle—to find 30 mW/cm2, 1.5 MHz and 20% duty cycle to be optimal …

Modeling Of A Multi-Megawatt Grid Connected Pv System With Integrated Batteries, Vandana Rallabandi, Oluwaseun M. Akeyo, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

The multi-megawatt grid connected photovoltaic (PV) system studied in the paper includes parallel arrays and power electronic units, each with their own DC-DC and DC-AC converters. In one configuration, the DC-AC converters of adjacent parallel sections are connected in cascade, in order to effectively operate as a multilevel inverter, thereby reducing the filtering requirements. Grid voltage oriented control is employed for inverters and a battery is incorporated for energy storage and performance improvement. Modeling is performed with the PSCAD/EMTDC software, such that both the power electronics components, controls and subsystem aspects, and the electric grid power system issues, can be …

Usu Awwa Tour | Civil And Environmental Engineering, Usu College Of Engineering

College of Engineering News

The newly formed student chapter of the American Water Works Association (AWWA) recently went on tours of two water facilities. In early October, ten students attend a tour of the Utah Water Research Laboratory here at USU. The students enjoyed seeing applied research that is conducted at the lab. This week, the chapter also visited the Franklin Idaho Drinking Water Treatment Plant. This exposure to the industry has been a remarkable professional and academic experience for the Chapter.

Development Of Traceable Capabilities In Non-Contact Thermal Metrology, Sam Boles

Masters

Accurate temperature measurement is crucial in industry to reduce waste and environmental impact. Industrial use of Radiation Thermometers (RTs) is becoming increasingly common due to their wide market availability, fast response time, large temperature ranges, and their ability to measure temperature without contact. With this growth in use, accurate RT measurements that are traceable to the International Temperature Scale of 1990 (ITS-90) are a growing requirement. Traceable calibrations are usually performed using horizontal Blackbody Cavity Radiation Sources (BCRSs). In the work presented, a unique vertical bath-based BCRS, constructed in-house at the National Standards Authority of Ireland (NSAI), was compared over …

A Real-Time Programmable Pulsatile Flow Pump For In Vitro Cardiovascular Experimentation, Rahul Raj Mechoor, Tyler Schmidt, Ethan Kung

Publications

Benchtop in vitro experiments are valuable tools for investigating the cardiovascular system and testing medical devices. Accurate reproduction of the physiologic flow waveforms at various anatomic locations is an important component of these experimental methods. This study discusses the design, construction, and testing of a low-cost and fully programmable pulsatile flow pump capable of continuously producing unlimited cycles of physiologic waveforms. It consists of a gear pump actuated by an AC servomotor and a feedback algorithm to achieve highly accurate reproduction of flow waveforms for flow rates up to 300 ml/s across a range of loading conditions. The iterative feedback …