Engineering Commons^™

The Evaluation Of Sequential Optimization And Reliability Analysis, Guannan Liu

Masters Theses

"Sequential Optimization and Reliability Assessment (SORA) has been used for more than one decade for reliability-based design (RBD), but comprehensive theoretical studies on its performance have not been conducted. Further investigations on its performance are still needed. The objective of this thesis is to evaluate the performance of SORA for various testing problems. The performance of SORA evaluated in this thesis includes (1) accuracy, (2) efficiency, and (3) convergence behavior or robustness with numerical testing problems. SORA is evaluated with comparison with other major RBD methodologies. The testing problems are in different scales (numbers of design variables, random variables, and …

Laser Sintering And Aerosol Printing Of Conductive Nanoparticles, Mahati Guntupalli

Masters Theses

"Fabrication and printing of nanoparticles is an essential step in the manufacturing of low cost- high efficiency electronic devices. High material costs of noble metal particles necessitates the investigation for a potential substituent. Conventional methods of manufacturing are time consuming and uneconomical, thus intense research is being done to employ new methods for cost, time and space effective manufacturing process.

The first part of the thesis presents the fabrication of Copper nanoparticles. As an economical substituent for noble metal nanoparticles, Copper nanoparticles satisfy various properties as conductive inks, simultaneously suffering from the vital problem of oxidation. The acceleration effects of …

Synthesis And Photonic Sintering Of Bioresorbable Zinc Nanoparticle Ink For Transient Electronics Manufacturing, Bikram K. Mahajan

Masters Theses

"Zinc is an essential 'trace element' that supports immune systems, and is required for DNA synthesis, cell division, and protein synthesis. Zinc nanoparticles (Zn NP) has antibacterial properties and potential to be used in biodegradable printed electronics devices. The research presented here is about the synthesis of Zn NP and their potential use in transient electronics devices. In Paper 1, a technique of room temperature synthesis of Zn NP is reported using ball milling. Controlled amount of PVP was mixed in the solvent to stabilize the Zn particles and minimize cold welding during milling. The size of the produced Zn …

Mitigation Of Glass Weave Skew Using A Combination Of Low Dk Spread Glass, Multi-Ply Dielectric And Routing Direction, Kartheek Nalla

Masters Theses

"As the data rates increase into the multi-gigabit range, the bit periods fall in the range of few tens of picoseconds. At above few Gbps, it becomes very important to reduce skew between differential pairs as it can adversely impact the signal eye and thereby increase bit error rate. The goal of this study is to mitigate the skew contributed by woven glass fabric of PCB dielectrics.

The glass weave skew between differential pairs in a PCB occurs due to the difference in dielectric constants (DK) of glass and resin. This thesis aims to mitigate the skew by reducing the …

Shear Behavior Of Reinforced Fly Ash-Based Geopolymer Concrete, Noor S. Yacob

Masters Theses

"The geopolymerisation of aluminosilicate materials such as fly ash has been a radical change in construction material's chemistry and composition, compared to the portland cement-based concrete calcium silicate-hydrate chemistry. The adoption of fly ash in concrete industry is a good use of by-product ashes to reduce emissions of the greenhouse gas implicitly. However, in this research, the replacement of portland cement by fly ash is 100%, which makes it a zero-cement concrete with no proprietary chemical additives.

Geopolymer concrete (GC) is a revolutionary synthetic material that combines sustainability and high engineering properties, and it is relatively cost-effective compared to portland …

Biodegradable Electronic And Optical Devices Toward Temporary Implants, Md Shihab Adnan

Masters Theses

"Implantable biomedical devices have a high potential to revolutionize health care technologies in near future. Implantable devices can be classified as permanent prosthetic devices such as pacemakers or nerve stimulants and temporary devices for intermediate monitoring and control scenario which are still in research phase. In contrast to permanent device, temporary implants lose functionality and become unnecessary after intended operational lifetime which may pose serious electromagnetic and biomedical safety concern, latent complications at the implanted sites and possible ethical issues if not removed from body by an additional surgical operation.

The first paper of this thesis focuses on exploring the …

A Simple Kinetic Analysis Of Syngas During Steam Hydrogasification Of Biomass Using A Novel Inverted Batch Reactor With Instant High Pressure Feeding, Xin Fan, Zhongzhe Liu, Joseph M. Norbeck, Chan S. Park

Civil and Environmental Engineering Faculty Research and Publications

A newly designed inverted batch reactor equipped with a pressure-driven feeding system was built for investigating the kinetics of syngas during the steam hydrogasification (SHR) of biomass. The system could instantly load the feedstock into the reactor at high temperature and pressure, which simulated the way to transport the feedstock into a hot and pressurized gasifier. Experiments were conducted from 600 °C to 700 °C. The inverted reactor showed very high heating rate by enhancing the carbon conversion and syngas production. The kinetic study showed that the rates of CH₄, CO and CO₂ formation during SHR were …

Chronic Exposure To Triclosan Sustains Microbial Community Shifts And Alters Antibiotic Resistance Gene Levels In Anaerobic Digesters, Daniel Elliott Carey, Daniel Zitomer, Anthony D. Kappell, Melinda J. Choi, Krassimira R. Hristova, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Triclosan, an antimicrobial chemical found in consumer personal care products, has been shown to stimulate antibiotic resistance in pathogenic bacteria. Although many studies focus on antibiotic resistance pertinent to medical scenarios, resistance developed in natural and engineered environments is less studied and has become an emerging concern for human health. In this study, the impacts of chronic triclosan (TCS) exposure on antibiotic resistance genes (ARGs) and microbial community structure were assessed in lab-scale anaerobic digesters. TCS concentrations from below detection to 2500 mg kg⁻¹ dry solids were amended into anaerobic digesters over 110 days and acclimated for >3 solid …

Emerging Investigators Series: Pyrolysis Removes Common Microconstituents Triclocarban, Triclosan, And Nonylphenol From Biosolids, J. J. Ross, Daniel Zitomer, T. R. Miller, C. A. Weirich, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Reusing biosolids is vital for the sustainability of wastewater management. Pyrolysis is an anoxic thermal degradation process that can be used to convert biosolids into energy rich py-gas and py-oil, and a beneficial soil amendment, biochar. Batch biosolids pyrolysis (60 minutes) revealed that triclocarban and triclosan were removed (to below quantification limit) at 200 °C and 300 °C, respectively. Substantial removal (>90%) of nonylphenol was achieved at 300 °C as well, but 600 °C was required to remove nonylphenol to below the quantification limit. At 500 °C, the pyrolysis reaction time to remove >90% of microconstituents was less than …

Transient Analysis Of Analyte Desorption Due To Thermal Cycling With Varying Pulse Duration, Patrick Getz, Christopher Carron, Stephen M. Heinrich, Fabien Josse, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

This paper introduces heating pulse duration modulation on a chemically sensitive, polymer-coated resonant cantilever platform for analyte discrimination during the desorption phase. As in our previous work, the embedded heaters enable real-time measurements of analyte sorption into the polymer film, without the need for traditional valve systems and reference gases [1-2]. This work particularly looks at the effects of varying pulse lengths on the sensor responses, while holding the heating power constant. A model differential equation is developed for the sensor response based on both the device sensitivity and transient response. This model can then be used together with estimation …

Total Value Of Phosphorus Recovery, Brooke K. Mayer, Lawrence A. Baker, Treavor H. Boyer, Pay Drechsel, Mac Gifford, Munir A. Hanjra, Prathap Parameswaran, Jared Stoltzfus, Paul Westerhoff, Bruce E. Rittmann

Civil and Environmental Engineering Faculty Research and Publications

Phosphorus (P) is a critical, geographically concentrated, nonrenewable resource necessary to support global food production. In excess (e.g., due to runoff or wastewater discharges), P is also a primary cause of eutrophication. To reconcile the simultaneous shortage and overabundance of P, lost P flows must be recovered and reused, alongside improvements in P-use efficiency. While this motivation is increasingly being recognized, little P recovery is practiced today, as recovered P generally cannot compete with the relatively low cost of mined P. Therefore, P is often captured to prevent its release into the environment without beneficial recovery and reuse. However, additional …

Automated Detection And Analysis Of Depolarization Events In Human Cardiomyocytes Using Madec, Agnieszka F. Szymanska, Christopher M. Heylman, Rupsa Datta, Enrico Gratton

Biomedical Engineering

Optical imaging-based methods for assessing the membrane electrophysiology of in vitro human cardiac cells allow for non-invasive temporal assessment of the effect of drugs and other stimuli. Automated methods for detecting and analyzing the depolarization events (DEs) in image-based data allow quantitative assessment of these different treatments. In this study, we use 2-photon microscopy of fluorescent voltage-sensitive dyes (VSDs) to capture the membrane voltage of actively beating human induced pluripotent stem cell-derived cardiomyocytes (hiPS-CMs). We built a custom and freely available Matlab software, called MaDEC, to detect, quantify, and compare DEs of hiPS-CMs treated with the β-adrenergic drugs, propranolol and …

Label-Free Imaging Of Metabolism And Oxidative Stress In Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes, Rupsa Datta, Christopher M. Heylman, Steven C. George, Enrico Gratton

Biomedical Engineering

In this work we demonstrate a label-free optical imaging technique to assess metabolic status and oxidative stress in human induced pluripotent stem cell-derived cardiomyocytes by two-photon fluorescence lifetime imaging of endogenous fluorophores. Our results show the sensitivity of this method to detect shifts in metabolism and oxidative stress in the cardiomyocytes upon pathological stimuli of hypoxia and cardiotoxic drugs. This non-invasive imaging technique could prove beneficial for drug development and screening, especially for in vitro cardiac models created from stem cell-derived cardiomyocytes and to study the pathogenesis of cardiac diseases and therapy.

Identification Of Key Performance Tasks To Demonstrate The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process On Public Sector Projects In Ireland., Barry Mcauley

Doctoral

Modelling (BIM) governed process was investigated in this thesis. Governments are now seeking a more rewarding methodology in the management and procurement of public sector building assets. This has seen an integrated focus by International Governments on BIM as a partial solution in both managing and procuring public sector building assets. Despite BIM bringing the Facility Manager closer to project conceptualisation, there was still a reluctance and a lack of perceived benefits of having them involved earlier in the design phase. There remains a lack of clear evidence on what improved contribution the Facilities Manager can provide. This thesis provides …

Stability Sensitivity Of Low-Rise Steel-Moment Framed Buildings To Hazard-Independent Damage, Trey Reynolds Powell

Electronic Theses and Dissertations

Structural stability has been the subject of much research in recent years. Simply, structural stability may be vieas the ability of the structure’s response to be relatively unaffected by perturbations to its system. Stability of low-rise steel-moment framed buildings and their sensitivity to perturbations from significant damage are the focus of this work. Perturbations, or changes from the normal state of the structural system, have the ability to affect the structural response. Second-order geometric effects imposed through column axial loads, and/or initial out-of-plumbness during the construction process, are a comperturbation in steel framing systems. If the structural members subjected to …

Nd2fe14b: (Nd1-X Dyx)2 Fe14b Core-Shell Structure Formation By Hot Press Liquid Phase Sintering, Li Chen

Dissertations, Master's Theses and Master's Reports

The purpose of this project is to produce Nd rich core-Dy rich shell grain structure in liquid phase sintered alloys by consolidating Dy rich powder mixed with powder. The technical barrier to producing the core-shell microstructure is that the Dy composition variations will homogenize during the consolidation process. This dissertation is based on the hypothesis that compositional homogenization of the core-shell structure can be minimized if consolidation occurs under applied pressure (hot press liquid phase sintering). The hypothesis is tested by comparing the homogenization of the Dy composition to the degree of consolidation with and without applied pressure. It is …

Incorporating Driver’S Behavior Into Predictive Powertrain Energy Management For A Power-Split Hybrid Electric Vehicle, Lei Feng

Dissertations, Master's Theses and Master's Reports

The goal of this series of research is to advance hybrid electric vehicle (HEV) energy management by incorporating driver’s driving behavior and driving cycle information. To reduce HEV fuel consumption, the objectives of this research are divided into the following three parts.

The first part of the research investigates the impact of driver’s behavior on the overall fuel efficiency of a hybrid electric vehicle and the energy efficiency of individual powertrain components under various driving cycles. Between the sticker number fuel economy and actual fuel economy, it is well known that a noticeable difference occur when a driver drives aggressively. …

Restraint System Design And Evaluation For Military Specific Applications, Sebastian Karwaczynski

Dissertations, Master's Theses and Master's Reports

This research focuses on designing an optimal restraint system for usage in a military vehicle applications. The designed restraint system must accommodate a wide range of DHM’s and ATD’s with and without PPE such as: helmet, boots, and body armor. The evaluation of the restraint systems were conducted in a simulated vehicle environment, which was utilized to downselect the ideal restraint system for this program.

In December of 2011 the OCP TECD program was formulated to increase occupant protection. To do this, 3D computer models were created to accommodate the entire Soldier population in the Army. These models included the …

Evaluating Groundwater Recharge In The Saloum Region Of Senegal, Alexander Wohlgemuth

Dissertations, Master's Theses and Master's Reports

Approximately 1.2 billion people in the world live in an area facing physical, or absolute, water scarcity (defined as access to less than 1,000 cubic meters of water). This number is projected to increase to 1.8 billion by the year 2025. Thirty-eight percent of the world’s population lives in arid, semi-arid or dry subhumid regions, which translates to a high dependence on the 30% of the world’s freshwater present in the ground. Further, the rate of water use is increasing rapidly – between two and two and a half times that of population growth, over the last century.

In regions …

Investigation Of The Resistance To Demagnetization In Bulk Rare-Earth Magnets Comprised Of Crystallographically-Aligned, Single-Domain Crystallites With Modified Intergranular Phase, Jie Li

Dissertations, Master's Theses and Master's Reports

The research presented in this dissertation investigates whether an increased coercivity of Neodymium-Iron-Boron (Nd2Fe14B) based bulk magnets at elevated temperature (160°C), which is now only obtainable by substituting ~7wt% dysprosium (Dy) for a portion of neodymium (Nd), can be achieved through specific microstructural modifications with decreased Dy concentrations. The approach is to reduce the size of individual crystallographically-aligned grains in the magnet so that each grain can only support a single magnetic domain and to simultaneously dilute the Nd-Fe inter-granular phase present in conventional magnets with a non-Fe-containing, Nd-rich phase (Nd-Cu alloy) in an attempt to partially magnetically isolate the …

Simulation Of Scalability For Autonomous Mobile Microgrids, Nathan Beyers

Dissertations, Master's Theses and Master's Reports

Microgrids are small-scale, decentralized systems for generation, storage, and management of electricity to provide power within a local area. By establishing these microgrids using autonomous robots, they can be made safer and more easily reconfigurable. This thesis presents a plan and outlines the infrastructure needed for scaling up previous experimental work on such systems. This work brings together a variety of tools in the form of both software and hardware to set the stage for how further development can be completed. An architecture for physical testing has been built to validate the full potential of navigation and making electrical connections …

Design Of Real-Time Combustion Feedback System And Experimental Study Of An Rcci Engine For Control, Jayant Kumar Arora

Dissertations, Master's Theses and Master's Reports

Premixed compression ignition (PCI) technologies offer high efficiency and low emissions but are usually confined by limited operation range as well as high pressure rise and heat release rate. In this work, a more recently developed PCI mode is explored where in-cylinder blending of two fuels with different auto-ignition characteristics (diesel and gasoline) is utilized to create reactivity stratification such that heat release rate and combustion timing can be controlled. This mode has been defined as Reactivity Controlled Compression Ignition (RCCI).

As part of this thesis, the main aim is to study various parameters that can be used to control …

Design Features And Optimization Of Profile Extrusion Dies, Abhishek Sai Erri Pradeep

Dissertations, Master's Theses and Master's Reports

This report deals with design of dies used in the plastic extrusion industry. The design methodology for extrusion dies has evolved over the years with advancement of computing technology. However, the design process is still heavily dependent on the experience of the die designer, and hence is still considered to be more of an art than science. Even for an experienced designer, the time required to design the die and perform consecutive fine tuning iterations is high. In this report, a proprietary optimization code for extrusion dies, .developed by Plastic Flow LLC, was tested and shown to be advantageous over …

Pilot-Scale Study Of Low-Tech Methods Of Sustainable Class A Biosolids Production: A Trial Run, Rebecca L. Green

Dissertations, Master's Theses and Master's Reports

Water resource recovery facilities can improve sustainability by producing Class A biosolids. However, many conventional methods for achieving Class A biosolids are expensive, with high maintenance and energy costs. However, low-cost, low-tech (LCLT) treatment methods are also available. The overall goal of the larger project of which this study was a part is to develop a rational and universal approach for design of LCLT processes. To achieve this goal, pilot-scale studies of LCLT processes will be performed. The goal of this portion of the project was to perform a trial run pilot-scale study. During the trial run, the pilot-scale biosolids …

The Effect Of Solidification Rate And Solutionizing Quench Rate On The Mechanical Properties And Hardening Response Of Aluminum Alloys: A Quantitative Comparison, Rafael Gil-Figueroa

Dissertations, Master's Theses and Master's Reports

A comparative study of five aluminum alloys was performed to characterize the effect of solidification rate and quench rate on casting microstructure and properties. The alloys were cast in the geometry for Jominy End Quench (JEQ) testing, so as to take advantage of the JEQ test’s ability to give data on multiple quench rates in a single sample and illustrate the quench sensitivity of an alloy. While the Jominy End Quench test has been used in aluminum alloys, the effects of solidification rates have not been assessed in depth. The work done by other studies has either focused on a …

Integration And Testing Of An Advanced Conformable Cng Tank In A Full-Sized Light-Duty Pickup, Abayomi Famuyiwa

Dissertations, Master's Theses and Master's Reports

Michigan Technological University is collaborating with Southwestern Energy and REL Inc. to develop and integrate a compressed natural gas (CNG) matrix tank that enables efficient packaging, increases range, and reduced cost for CNG vehicle applications. The vehicle being used in this project is a light-duty pickup truck to take advantage of the open space underneath the body and bed of the vehicle. With today’s cylindrical CNG tanks consuming cargo space, a solution is to develop a tank capable of being shaping to the underbody of the truck to free cargo space. University faculty and graduate students utilizes Finite Element Analysis …

An Experimental Investigation Of Low Temperature Combustion Regimes In A Light Duty Engine, Kaushik Kannan

Dissertations, Master's Theses and Master's Reports

A continuous investigation on the improvement of internal combustion engines is necessary due to the stringent emission and fuel economy regulations. Low Temperature Combustion (LTC) is a promising field of research since it can simultaneously reduce NOx and soot while attaining high thermal efficiencies in automotive engines. A thorough study of several LTC regimes is necessary to understand the quantitative comparison and the extent of feasibility of these regimes functioning on an automotive engine. This thesis concentrates on an experimental investigation of three different LTC modes namely Homogeneously Charged Compression Ignition (HCCI), Partially Premixed Compression Ignition (PPCI) and Reactivity Controlled …

A Cultural And Technical Study Of Wastewater Treatment Plant Maintenance In A Small Community In Peru, Rebecca C. Midkiff

Dissertations, Master's Theses and Master's Reports

Management of wastewater treatment plants (WWTPs) has been found to be especially challenging in small, rural communities of the developing world. This study examined maintenance of two small WWTPs in Leymebamba and Palmira, Peru through interviews with local authorities, observation of maintenance practices, wastewater measurements, and prediction of effects from maintenance with modeling using a wastewater process simulation software, BioWin. Challenges and motivations related to maintenance were investigated with semi-structured interviews, and maintenance practices were recorded during observations. It was found that outside supervision was a key motivating factor, and the existence of an operator who is supported by the …

Experimental Investigations Of Fused Filament Fabrication For Applications To Affordable Scientific Hardware, Bas Wijnen

Dissertations, Master's Theses and Master's Reports

This research aims to make science more accessible through the use of open source 3-D printers.

A new control system for CNC machines in general and 3-D printers specifically, is developed and presented that enables web-based control of 3-D tools from any Internet connected device. The system can be set up and controlled entirely from a web interface.

A tool was designed to help apply science to the developing world. The developing world remains plagued by lack of access to safe drinking water. A methodology is provided for the design, development, and technical validation of a low-cost open-source water testing …

Integrated Computational And Experimental Evaluation Of Electromagnetic Energy-Induced Self-Healing Performance Of Asphalt Composites, Zigeng Wang

Dissertations, Master's Theses and Master's Reports

The objective of this doctoral research is to investigate the electromagnetic energy induced self-healing effect of modified asphalt mixture material by developing computational and experimental characterization tools. More than 90% of the pavements in United States are constructed by asphalt mixture. The durability of pavement decreased by distresses has significant impact on maintenance costs. The asphalt mixture has self-healing capability because the asphalt could flow and fill the microcracks if enough external energy can be transmitted to the asphalt mixture system. However, the self-healing capability of asphalt is limited based on the climatic condition and traffic volume. Therefore, it is …