Engineering Commons^™

A Data Driven Approach To Quantify The Impact Of Crashes, Obaidur Rahman Kazi

Theses and Dissertations--Civil Engineering

The growth of data has begun to transform the transportation research and policy, and open a new window for analyzing the impact of crashes. Currently for the crash impact analysis, researchers tend to rely on reported incident duration, which may not always be accurate. Further, impact of the crashes could linger a much longer time at upstream, even if the records are correct for the crash spot and it is a challenge to quantify the impact of a crash from the complex dynamics of the recurrent and non-recurrent congested condition. Therefore, a difference-in-speed approach is developed in this research to …

Using Unmanned Aerial Systems (Uas) And Photogrammetry To Remotely Assess Landslide Events In Near Real-Time, Jordan T. Keeney

Theses and Dissertations--Civil Engineering

Commercially available unmanned aerial systems (UAS) and photogrammetry software have undergone rapid advancements in recent years. However, the use of UAS and photogrammetry techniques for monitoring surface landform deformation has not been adopted for the most part due to complicated workflows and complex UAS systems. This study demonstrates the ability to monitor landslides in near-real time with commercially available UAS and photogrammetry software using direct georeferencing and co- registration techniques. The results of this research were then assessed to develop an optimal workflow for the rapid assessment of surface deformations with direct georeferenced UAS obtained imagery and photogrammetry software.

Surface-Initiated Polymerizations For The Rapid Sorting Of Rare Cancer Cells, Jacob L. Lilly

Theses and Dissertations--Chemical and Materials Engineering

Cancer metastasis directly accounts for an estimated 90% of all cancer related deaths and is correlated with the presence of malignant cells in systemic circulation. This observed relationship has prompted efforts to develop a fluid biopsy, with the goal of detecting these rare cells in patient peripheral blood as surrogate markers for metastatic disease as a partial replacement or supplement to tissue biopsies. Numerous platforms have been designed, yet these have generally failed to support a reliable fluid biopsy due to poor performance parameters such as low throughput, low purity of enriched antigen positive cells, and insufficiently low detection thresholds …

Effectiveness Of Biochar Addition In Reducing Concentrations Of Selected Nutrients And Bacteria In Runoff, Rachel Williams

Theses and Dissertations--Biosystems and Agricultural Engineering

Land application and storage of horse manure and municipal sludge can increase nutrient and bacteria concentrations in runoff. Biochar increases soil nutrient retention when used as a soil amendment. The objectives of this study were to determine if biochar, when mixed with horse manure or sludge, affects runoff concentrations of total Kjehldahl nitrogen (TKN), ammonia-nitrogen (NH3-N), nitrate (NO3-N), total phosphorus (TP), dissolved phosphorus (DP), total suspended solids (TSS), chemical oxygen demand (COD), and fecal coliforms (FC). Horse manure and sludge were applied to 2.4 x 6.1 m fescue plots (six each), with three plots of each material amended with 5-8% …

Evaluation Of Flocculation, Sedimentation, And Filtration For Dewatering Of Algal Biomass, Nicholas A. Rhea

Theses and Dissertations--Biosystems and Agricultural Engineering

Algae can be used as a feedstock for agricultural fertilizers, livestock/poultry feeds, anaerobic digestion, and biofuel production. Regardless of the end product, water removal is necessary and difficult to do cost effectively. For each product the requirements for moisture content (or solids content) vary, such that a desirable water removal strategy would need to be adaptable to varying levels of water removal. Flocculation, with sedimentation and drying was evaluated as a possible strategy for algae dewatering. Anionic and nonionic flocculants are known to be ineffective at flocculating algal culture, which was confirmed for this case by electro-osmotic flow testing of …

Recirculating Calcium Hydroxide Solution: A Practical Choice For On-Farm High Solids Lignocellulose Pretreatment, William S. Sympson Jr.

Theses and Dissertations--Biosystems and Agricultural Engineering

Pretreatment is a necessary step in the utilization of lignocellulosic biomass for biochemical conversion to higher value products. There are multiple chemical choices for industrial settings, however on-farm choices are constrained to near ambient conditions with minimal specialized equipment, training, and limited waste disposal. Calcium hydroxide (lime) is suitable for on-farm use. This work presents the novel idea of pretreating biomass by recirculating a filtered, saturated lime solution in an up-flow, high solids (14-16% w/w) configuration at ambient conditions. In this system, lime solids were efficiently consumed, post-pretreatment washing of substrate did not significantly improve glucose yields, and energy and …

Heat And Mass Transfer In Baled Switchgrass For Storage And Bioconversion Applications, Drew F. Schiavone

Theses and Dissertations--Biosystems and Agricultural Engineering

The temperature and moisture content of biomass feedstocks both play a critical role in minimizing storage and transportation costs, achieving effective bioconversion, and developing relevant postharvest quality models. Hence, this study characterizes the heat and mass transfer occurring within baled switchgrass through the development of a mathematical model describing the relevant thermal and physical properties of this specific substrate. This mathematical model accounts for the effect of internal heat generation and temperature-induced free convection within the material in order to improve prediction accuracy. Inclusion of these terms is considered novel in terms of similar biomass models.

Two disparate length scales, …

Long-Term Effects Of Forestry Best Management Practices On Hydrology And Water Chemistry In Three Appalchian Headwater Catchments, Kameryn I. Wright

Theses and Dissertations--Biosystems and Agricultural Engineering

In 1982, a study was initiated in the Field Branch watershed, in the University of Kentucky’s Robinson Forest, to evaluate forestry best management practice (BMP) effectiveness after intensive harvesting. The study utilized a paired watershed approach on three adjacent Field Branch subcatchments. One subcatchment was left as the control, one had BMPs implemented (including a 50-ft undisturbed buffer along the stream), and one was clear-cut to the stream’s banks without the use of BMPs (i.e. logger’s choice). Prior research has shown that logging can negatively impact watershed functions by altering stream hydrology, geomorphology, water quality, and instream habitat. Thus, the …

Induction Of Cellulase In High Solids Cultivation Of Trichoderma Reesei For Enhanced Enzymatic Hydrolysis Of Lignocellulose, Danielle Empson

Theses and Dissertations--Biosystems and Agricultural Engineering

This project aimed investigated cellulase in-situ production for large-scale on-farm production of lignocellulosic biofuel. Cellulase activity and glucose released by T. reesei with corn stover and wheat bran as co-substrates for solid state cultivation (SSC) were examined. Co-cultivation has previously increased T. reesei cellulase, but corn stover and wheat bran have not been co-cultivated (Dhillon, Oberoi et al. 2011). This work compared cellulase activity and glucose concentration of corn stover co-cultivated with 0-40% wheat bran in high solids. Samples with at least 20% wheat bran exhibited increased cellulase activity. However, the average glucose concentration without wheat bran was 3.29 g/L …

Physico-Chemical, Rheological And Baking Properties Of Proso Millet, Manjot Singh

Theses and Dissertations--Biosystems and Agricultural Engineering

Due to climate change, water scarcity, increasing population and rising food prices, agriculture and food security has been affected worldwide. Cereal grains being a major part of world food supply also act as important energy source in human diet. In order to counter food insecurity, alternative grains are being explored, and millet being drought-resistant has the potential to serve as an alternative grain due to its comparable nutritional composition with other major cereals and its gluten free proteins. The evidence that gluten sensitivity is one of the increasing food intolerances is driving an increasing demand for gluten-free foods. However, gluten …

Development Of Regional And Hydraulic Geometry Curves For The Eastern Kentucky Coalfields, Ashlan Berry

Theses and Dissertations--Biosystems and Agricultural Engineering

Regional curves and hydraulic geometry curves relate bankfull channel dimensions to drainage area and bankfull discharge, respectively. These curves are used in the natural channel design process to help identify bankfull and to estimate bankfull dimensions of the design channel. Nineteen streams were surveyed to determine their bankfull parameters (cross-sectional area, width, mean depth, discharge, slope, and Manning’s n), along with 27 streams previously surveyed in other studies. The data were used to create regional and hydraulic geometry curves for three hydrologic landscape regions (HLR 9, HLR 11, and HLR 16, individually) in the Eastern Kentucky Coalfields (EKC) as well …

Modern Rock Dust Development And Evaluation For Use In Underground Coal Mines, Robert Eades

Theses and Dissertations--Mining Engineering

Following the promulgation of new permissible respirable dust standards by MSHA in 2014, new alternative rock dusts were created that combined the advantages of current industry applications while potentially reducing miner exposure to respirable dust. Research was performed to compare the explosion suppressing and ejection characteristics of three new types of rock dust to existing rock dust types. Explosion suppression tests were conducted in a 38-L chamber where pressures were recorded. Angle of ejection tests were conducted using a high explosive shock tube and high speed photography to determine angle of ejection and lift velocity. A comprehensive comparison of the …

Techno-Economic Potential Of Enhanced Coal Recovery Through Middlings Liberation And Re-Processing, Shivani

Theses and Dissertations--Mining Engineering

The typical preparation plant producing coal for the utility market targets a relative separation density in the plant of around 1.60 whereas plants generating metallurgical coal use relative cut point density values approaching 1.50. In some cases, achieving the specified coal quality requires operating at lower cut point values, which results in a significant loss of valuable coal. In these situations, a middlings stream can be produced using a secondary separator or a three-product unit, which would allow crushing of the middlings for liberation purposes and re-introduction into the plant feed. In this manner, higher quality coal can be produced …

Rock Dust Surface Chemistry Modifications For Eliminating Cake Formation And Improving Dispersion In Coal Dust Explosion Mitigation Applications, Qingqing Huang

Theses and Dissertations--Mining Engineering

Rock dust has been historically applied to mitigate the coal dust explosion in either dry or wet form. Dry rock dust performs best in inerting the potential coal dust explosion due to the greatest dispersive properties. However, it undesirably exposes underground coal miners to respirable dust particles which imposes a severe health danger. Wet dust application is able to significantly reduce the floatable dust particles but another problem associated with caking is predominant. Caking phenomenon is usually used to describe the change of free-flowing bulk solids into agglomerated chunks. Unfortunately, the environmental conditions of an underground mine have the potential …

Utilization Of A Small Unmanned Aircraft System For Direct Sampling Of Nitrogen Oxides Produced By Full-Scale Surface Mine Blasting, Robert B. Mccray

Theses and Dissertations--Mining Engineering

Emerging health concern for gaseous nitrogen oxides (NO_x) emitted during surface mine blasting has prompted mining authorities in the United States to pursue new regulations. NO_x is comprised of various binary compounds of nitrogen and oxygen. Nitric oxide (NO) and nitrogen dioxide (NO₂) are the most prominent. Modern explosive formulations are not designed to produce NO_x during properly-sustained detonations, and researchers have identified several causes through laboratory experiments; however, direct sampling of NO_x following full-scale surface mine blasting has not been accomplished.

The purpose of this thesis was to demonstrate a safe, innovative …

Optimal Roof Coverage And Identification Of Potential Roof Problems In Underground Coal Mines Using Led Lighting, James A. Samples

Theses and Dissertations--Mining Engineering

The popularity and implementation of light emitting diode (LED) lighting have increased drastically over recent years into both residential and industrial applications. However, due to MSHA permissibility requirements, LED lighting is not currently being fully utilized in underground coal mining. While previous research has focused on examining the benefits that LED lighting possesses over other common light sources, very few have been done to find the optimum configuration to illuminate underground excavations better for the safety of the miners. In this research, multiple experiments were conducted to evaluate the potential impacts LED lighting can have on underground mine safety. The …

Energy Resources Use Metrics, Rahul Y. Nehete

Theses and Dissertations--Mechanical and Aerospace Engineering

Energy resources use has been considered as a key component of sustainable development. Data related to global, regional, state, sector, industry and process demonstrate that a significant reduction of energy resources for a given production rate in manufacturing processes requires an introduction of transformational technologies at the process level, propagating the impact to higher scales, leading not just to a gradual improvement of traditional technologies but to more sustainable development.

The study offers two approaches to the formulation of the limits of energy use in the context of sustainable development. The first is to construct a map of key selected …

Flow Visualization Of Buoyant Instability In A Cross-Flow: An Implication For Flame Spread Over Forest Fuel Beds, Nikolay Gustenyov

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis reports small-scale laboratory experiments designed to visualize the flow over a heated plate. A low-speed wind tunnel was built, and a heating plate was flush mounted on the wind tunnel floor to provide a uniform heat flux over its surface. A paper thin cloth soaked with commercially available Vaseline was placed on top of the heating plate to produce thick smoke streaks that were carried downstream by a horizontal airflow. Both LED light and a laser sheet of approximately 30-degrees open angle were separately used to illuminate this flow, the latter advanced downstream with 1-cm interval from the …

Studies To Improve Exhaust System Acoustic Performance By Determination And Assessment Of The Source Characteristics And Impedance Optimization, Yitian Zhang

Theses and Dissertations--Mechanical and Aerospace Engineering

It is shown that the relationship between an impedance change and the dynamic response of a linear system is in the form of the Moebius transformation. The Moebius transformation is a conformal complex transformation that maps straight lines and circles in one complex plane into straight lines and circles in another complex plane. The center and radius of the mapped circle can be predicted provided that all the complex coefficients are known. This feature enables rapid determination of the optimal impedance change to achieve desired performance.

This dissertation is primarily focused on the application of the Moebius transformation to enhance …

Cryogenic Processing Of Al 7050-T7451 Alloy For Improved Surface Integrity, Bo Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Al 7050-T7451 alloy with good combinations of strength, stress corrosion cracking resistance and toughness, is used broadly in the aerospace/aviation industry for fatigue-critical airframe structural components. However, it is also considered as a highly anisotropic alloy as the crack growth behavior along the short transverse direction is very different from the one in the long transverse direction, due to the inhomogeneous microstructure with the elongated grains distributed in the work material used in the sheet/plate applications. Further processes on these materials are needed to improve its mechanical and material properties and broaden its applications.

The material with ultra-fine or nano …

Kinetics Of Molten Metal Capillary Flow In Non-Reactive And Reactive Systems, Hai Fu

Theses and Dissertations--Mechanical and Aerospace Engineering

Wetting and spreading of liquid systems on solid substrates under transient conditions, driven by surface tension and viscous forces along with the interface interactions (e.g., a substrate dissolution or diffusion and/or chemical reaction) is a complex problem, still waiting to be fully understood. In this study we have performed an extensive experimental investigation of liquid aluminum alloy spreading over aluminum substrate along with corroboration with theoretical modeling, performed in separate but coordinate study. Wetting and spreading to be considered take place during a transient formation of the free liquid surface in both sessile drop and wedge-tee mating surfaces’ configurations. The …

Biventricular Finite Element Modeling And Quantification Of 3d Langragian Strains And Torsion Using Dense Mri, Zhanqiu Liu

Theses and Dissertations--Mechanical and Aerospace Engineering

Statistical data suggests that increased use of evidence-based medical therapies has largely contributed to the decrease in American death rate caused by heart disease. And my studies are about two applications of magnetic resonance imaging (MRI) as a non-invasive approach in evidence-based health care research. In my first study, the achievement of a pulmonary valve replacement surgery was assessed on a patient with tetralogy of Fallot (TOF). In order to evaluate the remodeling of right ventricle, two biventricular finite element models were built up for pre-surgical images and post-surgical images. In my second study, 3D Lagrangian strains and torsion in …

Diffusion-Mediated Deposition Of Proteins, Ruiqian Zhan

Theses and Dissertations--Mechanical and Aerospace Engineering

Gradients of proteins play a prominent role in many biological processes, from development of multicellular organisms to chemical signaling in the immune system. Deposition of surface gradients is a way to permanently modifying a surface’s properties, resulting in the creation of novel materials which have widespread applications in biologically relevant fields, such as directed cell growth, production of biocompatible implantable materials, and creation of functional biosensors. These types of surfaces can also be used as an ex vivo tool to help understand many biological processes by mimicking the environment in gradient-related phenomena in a controllable way. However, despite the large …

Comparisons Of Ablator Experimental Performance To Response Modeling And Effects Of Water Phase Transition In Porous Tps Materials, David L. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The Mars Science Laboratory Entry Descent and Landing Instrumentation (MEDLI) project performed extensive arc jet tests for development, qualification, and calibration of instrumented heat shield plugs. These plugs each contained several thermocouples for recording near-surface and in-depth temperature response of the Phenolic Impregnated Carbon Ablator (PICA) heat shield. The arc jet test results are entered into a comprehensive database so that broad trends across the test series can be compared. One method of analysis is to compare with ablator material response calculations and solve the in-depth heat conduction equations. Using the near-surface thermocouple measurements as a boundary condition in numerical …

Development Of An Unmanned Aerial Vehicle For Atmospheric Turbulence Measurement, Brandon M. Witte

Theses and Dissertations--Mechanical and Aerospace Engineering

An unmanned aerial vehicle was developed to study turbulence in the atmospheric boundary layer. The development of the aircraft, BLUECAT5, and instrumentation package culminated in a series of flight experiments conducted in two different locations near Stillwater, Oklahoma, USA. The flight experiments employed the use of two of the unmanned aerial vehicles flying simultaneously, each containing a five-hole pressure probe as part of a turbulence-measuring instrumentation package. A total of 18 flights were completed with the objective to measure atmospheric properties at five altitudes between 20 and 120 meters. Multiple flights were flown over two days in which the effects …

Development And Application Of Gadolinium Free Cardiac Magnetic Resonance Fibrosis Imaging For Multiscale Study Of Heart Failure In Patients With End Stage Renal Disease, Tori A. Stromp

Theses and Dissertations--Physiology

Cardiac magnetic resonance (CMR) is a powerful tool to noninvasively image ventricular fibrosis. Late gadolinium enhancement (LGE) CMR identifies focal and, with T1 mapping, diffuse fibrosis. Despite prevalent cardiac fibrosis and heart failure, patients with end stage renal disease (ESRD) are excluded from LGE. Absence of a suitable diagnostic has limited the understanding of heart failure and obstructed development of therapies in the setting of ESRD. A quantitative, gadolinium free fibrosis detection method could overcome this critical barrier, propelling the advancement of diagnostic, monitoring, and therapy options. This project describes the development of a gadolinium free CMR technique and application …

Risk And Protective Factors Associated With Motorcycle Injury Severity In The United States, Deogratias Eustace, Sunanda Dissanayake

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

According to the Centers for Disease Control and Prevention, road crashes are one of the major causes of morbidity and mortality in the United States. The Healthy People 2020 has indicated that accidents are a major public health issue. Most motor-vehicle related events resulting in injury, disability, or death are predictable and preventable. Injuries are the leading cause of death for Americans aged 1 to 44 years and a leading cause of disability for all ages, regardless of sex, race/ethnicity, or socioeconomic status. Although motorcycles represent approximately 3% of all registered vehicles in the United States, motorcycling accounts for more …

Purdue Mission To Mars: Recruiting High School Students Into A Polytechnic College, Matthew Turner, Joe Dues, Tim Cooley, Rustin Webster, Richard Kopp, Andrew Mccart, Dani Reynolds

School of Engineering Technology Faculty Publications

This paper presents the development and implementation of an integrative half-day workshop experience for high school students that combines elements of four degree programs: Organizational Leadership, Electrical Engineering Technology, Mechanical Engineering Technology, and Computer Graphics Technology. During the workshop, students engage in active learning: Purdue New Albany is transformed into an aerospace design think tank and high school students are transformed into Polytechnic interns. The interns are then presented with a challenge: A new form of bacteria has possibly been identified on Mars and soil samples must be collected for analysis, however, the next shuttle launch is in 3 hours …

Stress-Induced Phase Change Sintering: A Novel Approach To The Fabrication Of Barium Chloride Transparent Ceramic Scintillators, William Shoulders

Electronic Theses and Dissertations

For the precise in-field identification of dangerous radioisotopes, the desire for higher resolution, cheaper, and more rugged gamma-ray scintillator detectors has pushed the materials science community to investigate new compounds and processing techniques.  One particular solution is Eu:BaCl2 transparent ceramics processed by the novel phase-change sintering technique. Typically, optical transparency in BaCl2 would be limited by birefringence scattering at grain boundaries due to mismatch in refractive index. Traditional ceramic processing routes would also predispose this volatile and hygroscopic material to the formation of defects, which interrupt the energy transfer in the scintillation process. Literature shows that these challenges have prevented …

Study Of Novel Power Semiconductor Devices For Performance And Reliability., Karthik Padmanabhan

Electronic Theses and Dissertations

Power Semiconductor Devices are crucial components in present day power electronic systems. The performance and efficiency of the devices have a direct correlation with the power system efficiency. This dissertation will examine some of the components that are commonly used in a power system, with emphasis on their performance characteristics and reliability. In recent times, there has a proliferation of charge balance devices in high voltage discrete power devices. We examine the same charge balance concept in a fast recovery diode and a MOSFET. This is crucial in the extending system performance at compact dimensions. At smaller device and system …