Engineering Commons^™

Esprit Based Robust Anti-Islanding Algorithm For Grid-Tied Inverter, Sandipan Patra

Conference papers

Abstract—This paper presents an anti-islanding protection scheme for a grid tied inverter. In this scheme, the oscillation variation in frequency is estimated by Estimation of Signal Parameters via Rotational Invariant Technique (ESPRIT). The proposed system is implemented in MATLAB and real time in OPAL-RT. Series of simulation results demonstrate that nondetection zone of proposed algorithm is negligible, and the scheme is also free from nuisance tripping to other transient events.

What Do We Know About Eesd And How Do We Know It?, Eddie Conlon, Iacovos Nicolaou, Brian Bowe

Conference papers

Huckle (2004) has argued that critical realism (CR) can provide a philosophical framework for higher education for sustainability. This paper reflects on the process of researching EESD in the Irish context and the usefulness of our approach which used mixed methods and drew on CR as its guiding philosophy. We will argue that aspects of the CR approach: its emphasis on a depth ontology, the search for causal mechanisms, its model of agency/structure relations and its emphasis on the combination of extensive and intensive methods provide tools for exploring EESD as a system. CR requires us to focus on “deeper …

An Implantable Microstrip Antenna Design For Mics-Band Biomedical Applications, Adnan Sondaş, Mustafa Hi̇kmet Bi̇lgehan Uçar

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, an implantable microstrip antenna design is introduced to cover the Medical Implant Communications Service (MICS, 402$-$405 MHz) band for biomedical telemetry systems. The radiating layer of the antenna comprises two concentric square split-ring elements and a metallic pad placed between them. A shorting pin is also used for miniaturization purposes, directly connecting the outer ring element to the ground plane. It is numerically demonstrated that the proposed antenna offers approximately 7{\%} impedance bandwidth and gains of 1.9 dBi at the designated frequency band. In addition, effects of some critical design parameters on the antenna performance are numerically …

Fetal Electrocardiogram Estimation Using Polynomial Eigenvalue Decomposition, Soydan Redif

Turkish Journal of Electrical Engineering and Computer Sciences

decomposition (PEVD) to the problem of fetal electrocardiogram (ECG) extraction from real ECG recordings obtained from abdominal leads. We model the fetal ECG extraction problem as a broadband sensor array signal processing problem in order to account for the broadband nature of the ECG noise present in the recordings. An algorithm for providing an approximate PEVD is used in order to estimate the broadband noise subspace. Suppression of the broadband noise and maternal ECG is achieved by carrying out an orthonormal projection of the recordings onto the estimated fetal subspace. The proposed scheme was evaluated with multichannel synthetic ECG signals …

Heart Sound Signal Classification Using Fast Independent Component Analysis, Yücel Koçyi̇ği̇t

Turkish Journal of Electrical Engineering and Computer Sciences

No abstract provided.

Modeling And Simulation Of Sensorless Control Of Four-Leg Inverter Pmsm Drives In The Case Of A Single-Phase Open Circuit Fault, Kamel Saleh, Mark Sumner

Turkish Journal of Electrical Engineering and Computer Sciences

This paper introduces a new method to track the saliency of a permanent magnet synchronous motor (PMSM) motor fed by a 4-leg inverter in the case of a single-phase open circuit fault through measuring the dynamic current response of the motor line currents due to the insulated-gate bipolar transistor (IGBT) switching actions. In the case of a single-phase open circuit fault, a fault-tolerant control strategy that includes taking appropriate actions to control the 2 remaining healthy currents results in minor system performance degradation. The new strategy introduced in this paper includes software modifications only to the saliency tracking algorithm used …

Control Of A Ternary Voltage Progression Based Cascaded Multilevel Inverter Using Classy Split Multicarrier Pulse Width Modulation, Gayathri Monicka Subarnan, Jamuna Venugopal

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a new hybrid pulse width modulation technique is proposed to enhance the performance of output voltage from a ternary progression based multilevel inverter. For high power applications, the multilevel inverter can appropriately replace the traditional converter without a transformer and the separate DC sources will be indispensable for various renewable energy sources. The classy split switching technique for the multicarrier pulse width modulation technique is adopted and the concept about new topology is presented in this paper. An arm controller has been chosen to implement the modulation due to its superior features, easy software, and hardware design. …

Optimization Of An Experimental Unsymmetrical-Unbalanced Two-Phase Induction Motor Using The Hgapso Hybrid Technique And The Finite Element Method For Increasing Efficiency And Reducing Torque Ripple, Navid Horiyat, Seyed Mohammad Shariatmadar, Vahid Amir

Turkish Journal of Electrical Engineering and Computer Sciences

Two-phase induction motors make an important contribution to social welfare. Accordingly, enhanced quality in such motors would benefit society. This study was done to test this type of motor to determine a nonlinear optimal point in the form of a multiobjective function between ripple of the torque and motor efficiency with consideration of a weighted coefficient in an unbalanced-unsymmetrical two-phase induction motor. Tests demonstrated that minimizing total harmonic distortion could reduce torque ripple. The optimal point was determined using optimization algorithms, and a hybrid of genetic and particle swarm optimization algorithms simultaneously in order to increase efficiency and to reduce …

Iec 61850-Based Parallel Bus Transfer Scheme For Industrial Substations, Cagil Ozansoy

Turkish Journal of Electrical Engineering and Computer Sciences

Bus transfer schemes have long been utilized in the power system industry as a means of supplying system loads with a consistent and reliable source of power. They assist in the switch to alternative sources of power supply in the case of maintenance or failures. The design of such schemes has undergone significant transformation from discrete electromechanical relays to microprocessor-based relays with sophisticated communication capabilities. IEC 61850 is a substation automation standard for the communication between devices in a substation. IEC 61850 makes it possible to integrate intelligent electronic devices on an Ethernet-based peer-to-peer communication network, eliminating the traditional hardwiring …

Experimental Performance Comparison Of A 2-Axis Sun Tracking System With Fixed System Under The Climatic Conditions Of Düzce, Turkey, Ali̇ Öztürk, Selman Alkan, Uğur Hasirci, Sali̇h Tosun

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, an experimental performance comparison of a 2-axis tracking system with a fixed panel in a solar renewable energy system is conducted. The paper mainly focuses on a cost-benefit analysis of fixed and tracking modules. For this aim, an experimental setup was built and periodical measurements were then obtained from the setup. To provide a better comparison, the panels were exposed to the same conditions during the measurements. By considering the real-time experimental results, the paper provides a quantitative analysis of the feasibility of tracking panels for domestic applications as well as an analysis of payback period if …

Open Source Software Adoption Evaluation Through Feature Level Sentiment Analysis Using Twitter Data, Muhammad Touseef Ikram, Naveed Anwer Butt, Muhammad Tanvir Afzal

Turkish Journal of Electrical Engineering and Computer Sciences

Adopting open source software from the Internet, developers often encounter the problem of accessing the quality of candidate software. To efficiently adopt the system they need a sort of quality guarantee regarding software resources. To assist the developer in software adoption evaluation we have proposed a software adoption assessment approach based on user comments. In our proposed approach, we first collected the textual reviews regarding the software resource, assigned the sentiment polarity (positive or negative) to each comment, extracted the adoption aspect which the comment talks about, and then based on the adoption aspects of the software generated an aggregated …

Solar Irradiation Estimator Based On A Self-Calibrated Reference Solar Cell, Touria Hassboun, Lhoussain El Bahir, Youness Aite Driss, Mustapha El Adnani

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper we propose a concept for estimating solar irradiation based on measurements of the current, voltage, and temperature of a photovoltaic (PV) cell. The estimation of the irradiation is obtained by processing these measurements using a PV cell mathematical model combined with a PI controller. Since the PV cell current is very sensitive to the irradiance level, the principle of the method is to force the model to reproduce the same current as that measured on the cell by applying an appropriate irradiance as input, for measured temperature and voltage. The appropriate irradiance, which is the output of …

An Overview Of The Development Of Cement-Based Batteries For The Cathodic Protection Of Embedded Steel In Concrete, Aimee Byrne, Niall Holmes, Brian Norton

Conference papers

This paper presents an overview of the cement-based batteries developed in DIT for use in the cathodic protection of embedded steel in reinforced concrete undergoing chloride-induced corrosion. Cathodic protection delivers an external current (approximately 20mA per m2 of embedded steel) which effectively polarises the internal current generated during corrosion. The batteries developed in DIT comprise of a cement-based electrolyte containing different additives including sand, aggregate, salts, carbon black and plasticiser with protruding anode and cathode metal plates. These batteries produced an initial electrical output of 1.5V and 23mA through a 10 resistor as measured using data acquisition units and a …

Solar Photovoltaic System Control Topology Investigation For Power Source Mismatch, Lynette O'Callaghan

Conference papers

An investigation into solar photovoltaic (PV) system control topology selection, when partial shade is anticipated in the solar array, is presented. As available area is maximised in Building Integrated PV (BIPV) systems, shading is an inevitable consequence. The presence of partial shading in a PV array leads to multiple power peaks in the power-voltage curve, due to bypass diode sections being triggered, and an increase in module mismatch losses in the array. A building energy design software, Integrated Environmental Solutions, is used to determine the shadowed area on PV modules throughout the year, incorporating the PV system location and geometrical …

Using Photovoltaics To Power Electrochemical Chloride Extraction From Concrete, Sean Bond, Lynette O'Callaghan, Niall Holmes Dr., Brian Norton

Conference papers

Corrosion of embedded steel in reinforced concrete (RC) is a world-wide problem, that reduces structural performance and lifespan. Chloride attack may be a result of seawater, de-icing salts or contaminated admixtures, brought on by ingress of chlorides into the concrete. Electrochemical Chloride Extraction (ECE) is a non-destructive treatment for contaminated RC structures, that due to uncertainty of treatment times and applied current densities, is only 50% effective. It is often diesel powered has an environmental impact and often very costly due to the long treatment times. To improve the efficiency of ECE the influences of concrete resistance, cement type and …

Developing Graduate Attributes To Meet The Grand Challenges: What Pedagogical Factors Influence The Development Of Graduate Attributes And Does Engineering Education Ensure Graduates Can Address The Global Grand Challenges?, Una Beagon, Brian Bowe

Conference papers

My interest in preparing graduates for a successful career in industry stems from personal experience of employing graduates as civil and structural engineers in an engineering consultancy role. The range of skills, abilities and values of each graduate was varied, and it became apparent that academic achievement, whilst important was not the defining skill for achieving early responsibility or promotion within the company. More often, the graduate who was able to communicate well and self-direct his/her work was given more responsibility and opportunity. Many graduates would define early promotion, advanced responsibility and the associated increase in salary as the beginnings …

Solid-State Transformers For Interfacing Solar Panels To The Power Grid: An Optimum Design Methodology Of A High Frequency Transformer For Dc-Dc Converter Applications, Kenny George

Inquiry: The University of Arkansas Undergraduate Research Journal

Nowadays the use of power electronic interfaces to integrate distributed generation with the power grid is becoming relevant due to the increased penetration of renewable energy sources like solar, and the continued interest to move to a smarter and more robust electric grid. Those interfaces, which also provide a voltage step-up or step-down function, are of particular interest because renewable energy sources do not always have voltages compatible with the connecting grid. Among them, the so-called “power electronic transformer” or “solid-state transformer” (SST) is the focus of significant research. Advantages such as bidirectional power flow, improved system control, reduced size, …

Performance Of Masonry Blocks Containing Different Proportions Of Incinator Bottom Ash, Niall Holmes, Hugh O'Malley, Paul Cribbin, Henry Mullen, Garrett Keane

Articles

No abstract provided.

An 11-Switch Multilevel Inverter With A Modified Space Vector Modulation, Nasrudin Abd Rahim, Hew Wooi Ping, Jafferi Jamaludin

Turkish Journal of Electrical Engineering and Computer Sciences

This paper proposes a new 3-phase multilevel inverter that is able to generate 7 levels in line-to-line voltage with only 11 switches. The inverter is formed from the 6-switch conventional full-bridge topology with the addition of 5 bidirectional switches in which 2 of them are shared among the three phases. By doing so, the number of power switches can be minimized, thus reducing the complexity in generating and controlling PWM signals. A novel voltage control scheme based on space vector modulation is developed by introducing a virtual vector in every sector of the vector hexagon. This is to overcome the …

Empirical Mode Decomposition Application For Short-Term Flicker Severity, Yasemi̇n Önal, Ömer Nezi̇h Gerek, Doğan Gökhan Ece

Turkish Journal of Electrical Engineering and Computer Sciences

In this article, an approach based on empirical mode decomposition (EMD) is suggested in order to calculate short-term flicker severity, Pst, in power systems. EMD is a new signal processing method used for the analysis of nonlinear and nonstationary signals. Pst is an important quantity in the electric power quality index defined by the International Electrotechnical Commission. In the suggested approach, the voltage signal is separated into intrinsic mode function components using EMD. These components are used for calculating the voltage flicker amplitude and frequency, and Pst is calculated as a result of the statistical evaluation of flicker amplitude. EMD …

Commutation Angles Adjustment In Srm Drives To Reduce Torque Ripple Below The Motor Base Speed, Ali Shahabi, Amir Rashidi, Milad Afshoon, Seyyed Mortaza Saghaian Nejad

Turkish Journal of Electrical Engineering and Computer Sciences

This paper investigates the problem of high torque ripple in switched reluctance motor (SRM) drives. A method is proposed for below the base speed operation of SRM that determines both the turn-off and the turn-on angles for reducing motor torque ripple. Determination of the turn-off angle is an offline process performed through solving a multiobjective optimization function consisting of two criteria: torque ripple and copper loss. Turn-on angle adjustment, however, is an online process based on the intersection approach of consecutive phase currents, particularly proposed in this paper. Simulation and experimental results are presented to validate the reduction in torque …

Wavefront-Ray Grid Fdtd Algorithm, Mehmet Çi̇ydem

Turkish Journal of Electrical Engineering and Computer Sciences

A finite difference time domain algorithm on a wavefront-ray grid (WRG-FDTD) is proposed in this study to reduce numerical dispersion of conventional FDTD methods. A FDTD algorithm conforming to a wavefront-ray grid can be useful to take into account anisotropy effects of numerical grids since it features directional energy flow along the rays. An explicit and second-order accurate WRG-FDTD algorithm is provided in generalized curvilinear coordinates for an inhomogeneous isotropic medium. Numerical simulations for a vertical electrical dipole have been conducted to demonstrate the benefits of the proposed method. Results have been compared with those of the spherical FDTD algorithm …

Prediction-Based Reversible Image Watermarking Using Artificial Neural Networks, Mahsa Afsharizadeh, Majid Mohammadi

Turkish Journal of Electrical Engineering and Computer Sciences

In prediction-based reversible watermarking schemes, watermark bits are embedded in the prediction errors. An accurate prediction results in smaller prediction errors, more efficient embedding, and less distortion for the watermarked image. In this paper, an accurate prediction is made using artificial neural networks. Before the embedding operation, 2 neural networks are trained by the pixel values of the image. Then the trained neural networks predict the pixel values that are used in the embedding operation. Due to the training ability of the neural networks, the prediction will be more accurate than the averaging technique. Experimental results show that the proposed …

Site-Specific Design Optimization Of Horizontal-Axis Wind Turbine Systems Using Pso Algorithm, Ulaş Emi̇noğlu

Turkish Journal of Electrical Engineering and Computer Sciences

Due to the complexity of wind turbine systems (WTSs) containing multiple components, design parameters of a WTS must match each other in order to produce electrical energy at a lower cost and a higher efficiency. In this study, a framework for site-specific design optimization of a horizontal-axis WTS is proposed. It is based on cost reduction and the objective function is the produced energy cost. The cost of energy model proposed by the National Renewable Energy Laboratory is utilized. In order to compute turbine output power that results in annual energy production, a new approach is proposed to model the …

A New Deployment Method For Electric Vehicle Charging Infrastructure, Bünyami̇n Yağciteki̇n, Mehmet Uzunoğlu, Ari̇f Karakaş

Turkish Journal of Electrical Engineering and Computer Sciences

The fast depletion of fossil fuels, climate change, and global warming have become major worldwide problems and alternatives for conventional transportation have been actively researched in the last decade. Compared to available conventional vehicles, electric vehicles have a leading position due to their environmentally friendly transportation. Recent electric vehicle penetration brings the necessity of a high number of charging stations, which are considered to be established in community areas such as shopping centers, hospitals, commercial areas, university campuses, residential areas, and streets. Deployment planning of charging stations is very important for driver expectations and social and economic impacts of electric …

A Literature Review Of The Evolution Of British Prefabricated Low-Rise Housing, Daniel O'Neill, Samantha Organ

Articles

Purpose – The purpose of this paper is to explore academic papers and reports and present a chronology of the evolution of British low-rise prefabricated housing. The paper provides chronological information for construction and surveying researchers undertaking research in associated areas.

Design/methodology/approach – This is a qualitative literature review, providing an exploration and analysis of academic papers and reports on low-rise prefabricated housing.

Findings – A substantial literature was discovered. However, there are gaps in the available literature. The history of British construction technology is a rich research area but is under-researched. Prefabricated housing has a long history dating back …

Book Reviews: Robert Hensey, First Light: The Origins Of Newgrange. Oxford: Oxbow Books, Series: Oxbow Insights In Archaeology, 2015, Frank Prendergast

Articles

N/A

Main Contractor Selection On Construction Projects When Adapting An Integrated Project Delivery Procurement Strategy Within An Irish Context., Fiacra Mcdonnell

Other Resources

The Irish construction industry has experienced turbulent years over the last decade from an economic viewpoint. The industry has tended to be conservative in nature and slow to embrace change. However international influences have exposed Irish construction professionals to new more efficient systems and technologies, which although slow to take hold have started to gain traction within certain sectors of the industry. This study has focussed on the innovative procurement route known as Integrated Project Delivery (IPD), and its facilitator; Building Information Modelling (BIM). The overall aim of this study was to investigate whether Integrated Project Delivery was a viable …

Grange Stone Circle (B) – New Thoughts On An Old Monument, Frank Prendergast

Book/Book Chapter

No abstract provided.

Experimental Rapid Renewal Project (Bridge Construction), Bobby W. Meade, Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

The objectives of this study were to develop specifications and contract language and to monitor the implementation them to effectively use rapid reconstruction and extended service life concepts in new bridge construction. Through the use of A + B bidding, a duplex protective coating system using Hot Dipped Galvanizing (HDG) and paint, and preservation techniques such as concrete sealers and stains the Kentucky Transportation Cabinet attained those goals.