Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2016

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 7501 - 7530 of 9604

Full-Text Articles in Engineering

A Heuristic Approach To Storage System Design With Simultaneous Assignment Of Goods, Tobias Staab, Willibad A. Gunthner Jan 2016

A Heuristic Approach To Storage System Design With Simultaneous Assignment Of Goods, Tobias Staab, Willibad A. Gunthner

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

In the paper at hand, we analyze the planning of manually operated storage systems consisting of different storage areas. When solving design problems like dimensioning or equipment selection, the assignment of goods to storage areas has to be considered. Based on a general model to describe the geometry and performance calculation of a warehouse, we present a heuristic approach to assign goods to storage areas while simultaneously determining the design of the storage areas in a way that generates the lowest running costs. Our approach aims to support planners during the rough planning stage by providing a quick overview of …

Go to article

Intermodal Hubs In The Physical Internet, Nadeepa Wickramage, Bill Ferrell Jan 2016

Intermodal Hubs In The Physical Internet, Nadeepa Wickramage, Bill Ferrell

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

Distribution of finished goods is currently an effective but inefficient process that consumes significant quantities of fossil fuel to move empty assets. This results in increased costs that are passed to the consumer and unnecessarily increased carbon emissions. The Physical Internet (PI) is focused on shared logistics that could prove to be an important element of next-generation logistics systems. The idea is to store and transport goods in anonymous standard-sized containers so that transportation and warehousing can be efficiently shared by many companies including competitors. If implemented, this idea has the potential of dramatically increasing efficiency thereby reducing fuel consumption …

Go to article

Analyzing Order Throughput Times In A Milkrun Picking System, J. P. Van Der Gaast, M.B. M. De Koster, Ivo J.B.F. Adan Jan 2016

Analyzing Order Throughput Times In A Milkrun Picking System, J. P. Van Der Gaast, M.B. M. De Koster, Ivo J.B.F. Adan

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

E-commerce fulfillment competition evolves around cheap, speedy, and time-definite delivery. Milkrun order picking systems have proven to be very successful in providing handling speed for a large, but highly variable, number of orders. In this system, an order picker picks orders that arrive in real time during the picking process; by dynamically changing the stops on the picker’s current picking route. The advantage of milkrun picking is that it reduces order picking set-up time and worker travel time compared to conventional batch picking systems. This paper is the first in studying order throughput times of multi-line orders in a milkrun …

Go to article

A Lagrangian Relaxation For Capacitated Single Allocation P-Hub Median Problem With Multiple Capacity Levels, Ching-Jung Ting, Kuo-Rui Lu Jan 2016

A Lagrangian Relaxation For Capacitated Single Allocation P-Hub Median Problem With Multiple Capacity Levels, Ching-Jung Ting, Kuo-Rui Lu

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

In this paper we consider a capacitated single allocation p-hub median problem with multiple capacity levels (CSApHMPMC) in which the decisions are to determine the location of p hubs and their capacity levels, the single allocation of non-hub nodes to hubs in the logistics network. This problem is formulated as an integer programming model with the objective of minimizing the sum of total transportation cost and fixed cost of the selected p hubs with established capacity levels. A Lagrangian relaxation (LR) approach is proposed to solve the CSApHMPMC. The Lagrangian function that we formulated decomposed the original problem into smaller …

Go to article

Multi-Type Display Calculus For Dynamic Epistemic Logic, Sabine Frittella, Giuseppe Greco, Alexander Kurz, Alessandra Palmigiano, Vlasta Sikimić Jan 2016

Multi-Type Display Calculus For Dynamic Epistemic Logic, Sabine Frittella, Giuseppe Greco, Alexander Kurz, Alessandra Palmigiano, Vlasta Sikimić

Engineering Faculty Articles and Research

In the present paper, we introduce a multi-type display calculus for dynamic epistemic logic, which we refer to as Dynamic Calculus. The displayapproach is suitable to modularly chart the space of dynamic epistemic logics on weaker-than-classical propositional base. The presence of types endows the language of the Dynamic Calculus with additional expressivity, allows for a smooth proof-theoretic treatment, and paves the way towards a general methodology for the design of proof systems for the generality of dynamic logics, and certainly beyond dynamic epistemic logic. We prove that the Dynamic Calculus adequately captures Baltag-Moss-Solecki’s dynamic epistemic logic, and enjoys Belnap-style cut …

Go to article

Composite Gel Polymer Electrolyte For Lithium Ion Batteries, Roya Naderi Jan 2016

Composite Gel Polymer Electrolyte For Lithium Ion Batteries, Roya Naderi

Electronic Theses and Dissertations

Batteries have been ubiquitously utilized in enormous applications such as portable electronics, satellites, computers, medical instruments, and electric cars. The development of battery technology has been through a long journey since the 17th century, paving its way to commercialization of lithium ion batteries in 1991 by Sony. Rechargeable lithium ion batteries represent the most favorable type of batteries for portable applications due to their high energy density compared to other alkali metals. In 1997, lithium polymer batteries with solid polymer/composite electrolyte were introduced where the safety drawbacks of the liquid electrolyte were eliminated but the ionic conductivity of the batteries …

Go to article

Study Of Moisture And Water Effects In Low Temperature Crystallization Of Perovskite Film For Efficient Solar Cells, Ashish Dubey Jan 2016

Study Of Moisture And Water Effects In Low Temperature Crystallization Of Perovskite Film For Efficient Solar Cells, Ashish Dubey

Electronic Theses and Dissertations

Organic-inorganic perovskite solar cells have become a promising alternative to fossil fuel based energy sources due to their unique properties such as tunable low bandgap, long charge diffusion length, low exciton binding energy and balanced charge transport. The semiconducting perovskite films are typically prepared from low temperature solution processing and the corresponding solar cells have exhibited power conversion efficiency (PCE) of more than 20%. However, perovskite solar cells suffer from poor stability in presence of moisture and use of toxic element (Pb). Understanding the crystallization process and the effects of moisture and water is important to obtain high quality perovskite …

Go to article

Precast Full-Depth Deck Panels Supported On Inverted Bulb-Tee Bridge Girders, Michael James Mingo Jan 2016

Precast Full-Depth Deck Panels Supported On Inverted Bulb-Tee Bridge Girders, Michael James Mingo

Electronic Theses and Dissertations

The South Dakota Department of Transportation (SDDOT) currently uses precast double-tee bridge deck systems for many of its county bridges because they are economical and fast in construction. Current bridges are designed for a service life of 75 years. However, many double-tee girder bridges are deteriorating and some need total replacement after 40 years in service. Furthermore, the double-tee bridge system only has one supplier in South Dakota. Alternative durable precast or prefabricated bridge systems are needed to provide more options to local governments when designing a new bridge. Different alternatives will also give local governments more flexibility to select …

Go to article

Reflectance-Based Calibration And Validation Of The Landsat Satellite Archive, Sandeep Kumar Chittimalli Jan 2016

Reflectance-Based Calibration And Validation Of The Landsat Satellite Archive, Sandeep Kumar Chittimalli

Electronic Theses and Dissertations

The primary objective of this project was to consistently calibrate the entire Landsat series to a common reflectance scale by performing cross-calibration corrections from Landsat-8 OLI to Landsat- 1 MSS. A consistent radiance-based calibration was already performed from Landsat-8 OLI through Landsat-1 MSS using bright targets and dark targets. The MSS radiance-based calibration results showed an uncertainty of about ±5%. Typically to convert from radiance to reflectance a solar model is used. Unfortunately, there are numerous solar models, all with various levels of accuracies. It was also seen that there is a data format inconsistency for different types of MSS …

Go to article

Reuse Of Aqueous Waste Streams For Transportation-Related Applications, Gregory L. Hansen Jan 2016

Reuse Of Aqueous Waste Streams For Transportation-Related Applications, Gregory L. Hansen

Electronic Theses and Dissertations

Aqueous waste streams produced from commercial, industrial, and municipal processes may be potentially reused for transportation applications. The objectives of this project were to identify potential transportation-related applications for aqueous waste streams available in South Dakota, develop guidance for the beneficial reuse of aqueous waste streams, and evaluate the reuse of MIEX® brine generated by the Watertown Municipal Water Treatment Plant (WMWTP). This study identified many aqueous wastes from municipal water and wastewater treatment facilities, industrial and agricultural processes in South Dakota that can be potentially used for ice and dust control. Beneficial reuse of these waste streams requires a …

Go to article

Bidirectional Distribution Reflection Function Of Algodones Dunes, Mahesh Shrestha Jan 2016

Bidirectional Distribution Reflection Function Of Algodones Dunes, Mahesh Shrestha

Electronic Theses and Dissertations

The primary objective of this project was to develop the Algodones Dunes as a pseudo-invariant calibration site (PICS) suitable for absolute calibration of satellite sensors based on a surface reflectance model. Two approaches were taken during this research: a field campaign and laboratory measurements. The first approach, the field campaign, was accomplished with a trip to the Algodones Dunes from the 8th to the 13th of March, 2015. During the field campaign, several test points from spatially different regions of the Algodones Dunes were studied. Reflectance of the sand at each test point was observed from different view angles. The …

Go to article

Behavior Of Light In A Photobioreactor And Design Of Light Guides, Anand Rajendran Jan 2016

Behavior Of Light In A Photobioreactor And Design Of Light Guides, Anand Rajendran

Electronic Theses and Dissertations

The purposes of the thesis is to explain the microalgae cultivation in a photobioreactor system; demonstrate the light activity in a flat-plate photobioreactor; and design the light channeling system. Generally, microalgae are cultivated in open ponds and in closed photobioreactor systems. In open ponds, the productivity of microalgal biomass is very low, due to lack and improper use of carbon and energy sources. In photobioreactor systems, all required inputs can be supplied effectively to the microalgae which in turn increases the biomass productivity. However, these systems are expensive to build and to maintain in a largescale basis. In a photobioreactor, …

Go to article

Design Of A Caustic Injection System In A Crude Distillation Unit, Andrew R. Cope Jan 2016

Design Of A Caustic Injection System In A Crude Distillation Unit, Andrew R. Cope

Honors Theses

Caustic Injection is a high-risk chemical process utilized in many refineries across the world to control overhead corrosion in the atmospheric distillation column of the Crude Distillation Unit. This thesis discusses the considerations that need to be accounted for in the design of a caustic injection system, as well as my own work at an internship where I was a member of a design team that worked to design a caustic injection system for a nearby refinery.

Go to article

Pumping Of Fresh Concrete: Insights And Challenges, Geert De Schutter, Dimitri Feys Jan 2016

Pumping Of Fresh Concrete: Insights And Challenges, Geert De Schutter, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Pumping of Fresh Concrete is of Utmost Importance for Concrete Practice. Required Pumping Pressures Are Typically Estimated based on Design Charts. However, with the Increased Use of Chemical Admixtures and the Development of More Flowable Concrete Mixtures, the Accuracy of Traditional Design Charts is Questioned. in Recent Years, Significant Progress Has Been Obtained in Understanding the Flow of the Material in the Pumping Pipe, Including the Behavior of the Lubrication Layer Near the Pipe Surface. in Comparison with Traditional Design Charts, This Results in More Reliable Pressure Predictions When Considering Very Fluid Concrete Types Like Self-Consolidating Concrete. Some Remaining Challenges …

Go to article

Induction Local Softening Of Advanced High Strength Steel, Jorge Saul Cisneros Jan 2016

Induction Local Softening Of Advanced High Strength Steel, Jorge Saul Cisneros

Wayne State University Theses

This study was to determine the important parameters regarding induction local softening of dual phase steel with improved manufacturability for autobody stamping. Samples were inductively heat-treated, and then tested using micro hardness test, tensile test, microstructure analysis, and x-ray diffraction analysis. It was found that above 800oC there was a significant reduction in hardness. The cooling rate was found to be the most important parameter affecting the final properties of the steel. The tensile test showed a significant increase in total elongation with a small reduction in ultimate tensile strength. These factors led to the ultimate increase in formability. X-ray …

Go to article

Specification Development For Cold In-Situ Recycling Of Asphalt, Amir Tabakovic, Ciaran Mcnally, Eanna Fallon Jan 2016

Specification Development For Cold In-Situ Recycling Of Asphalt, Amir Tabakovic, Ciaran Mcnally, Eanna Fallon

Research and Innovation - Articles

In-situ cold recycling provides a valuable means to reduce the environmental impact of road construction. The reduced energy requirements relative to traditional hot mix recycling can lead to significant reductions in cost and associated CO2 emissions. Worldwide, in-situ cold recycling has been found to be particularly useful in the rehabilitation of rural roads where site locations are far from asphalt plants. However, practical issues remain due to the evolving nature of cold bituminous materials. Unlike hot-mix asphalts which gain strength quickly as they cool, cold-mix bituminous materials gain strength slowly over time. This is particularly an issue in countries …

Go to article

Enhancing Student Learning By Narrowing The Gap Between Feedback Giving And Feedback Receiving, Eileen Goold Dr Jan 2016

Enhancing Student Learning By Narrowing The Gap Between Feedback Giving And Feedback Receiving, Eileen Goold Dr

Conference Papers

Feedback is one of the most powerful influences on learning and achievement. However the mere provision of feedback to students does not necessarily lead to improved learning. Feedback is ineffective if it does not close the gap between learning goals and students’ performance. Often students do not have clear goals and they do not know what learning activities will improve their learning performance. Consequently the opportunity to learn from the feedback is lost. Learning is a social process and while young people have increasingly strong social needs they struggle with academic language. This study investigates the influence of lecturers’ feedback …

Go to article

Project Oasis: Optimizing Aquaponic Systems To Improve Sustainability, Siddharth Nigam, Paige Balcom Jan 2016

Project Oasis: Optimizing Aquaponic Systems To Improve Sustainability, Siddharth Nigam, Paige Balcom

Honors Theses and Capstones

Started in Fall 2015, Project OASIS (Optimizing Aquaponic Systems to Improve Sustainability) is an interdisciplinary capstone project with the goal of designing a sustainable and affordable small-scale aquaponic system for use in developing nations to tackle the problems of malnutrition and food insecurity. Aquaponics is a symbiotic relationship between fish and vegetables growing together in a recirculating system. The project’s goals were to minimize energy consumption and construction costs while using universally available materials. The computational fluid dynamics (CFD) software OpenFOAM was used to create transient and steady-state models of fish tanks to visualize velocity profiles, streamlines, and particle movement. …

Go to article

Physical Modeling Of The Atmospheric Boundary Layer In The University Of New Hampshire’S Flow Physics Facility, Stephanie Gilooly, Gregory Taylor-Power Jan 2016

Physical Modeling Of The Atmospheric Boundary Layer In The University Of New Hampshire’S Flow Physics Facility, Stephanie Gilooly, Gregory Taylor-Power

Honors Theses and Capstones

The atmospheric boundary layer is the lowest part of the atmosphere, and is defined by a region from the surface of the earth to approximately 500-1000m altitude in which air velocity changes from zero at the surface to the velocity of the wind at a certain altitude. The type of atmospheric boundary layer is characterized by the terrain it encounters, varying from open sea and mud flats to suburban areas and city centers with high- and low-rise buildings. The goal of this project is to generate different types of atmospheric boundary layers for scale model testing in the UNH Flow …

Go to article

Electrochemical Detection Of Antioxidants, Garrett Thompson Jan 2016

Electrochemical Detection Of Antioxidants, Garrett Thompson

Honors Theses and Capstones

No abstract provided.

Go to article

The Use Of Remote Sensing Technologies And Models To Study Pollutants In Pdn Region, Suhail Mahmud Jan 2016

The Use Of Remote Sensing Technologies And Models To Study Pollutants In Pdn Region, Suhail Mahmud

Open Access Theses & Dissertations

Using a suite of modeling techniques and instrumentation we study the atmospheric pollutants in the PdN Region. The first objective of this work was to measure hemi-spherically integrated, spectrally resolved solar photon flux (actinic flux) between the wavelengths 300 and 700 nm, and use the measured actinic flux to improve air quality simulations. Actinic flux was measured in the PdN region in order to calculate photolysis rate coefficients for different pollutants. The improved photolysis rate coefficients were then integrated into a photochemical air quality model (CAMx) in order to improve air quality forecasting. We present the simulations performed for a …

Go to article

Environmental Dynamics: A Compendium Of Rhetorical Application, Annalisa Perez Jan 2016

Environmental Dynamics: A Compendium Of Rhetorical Application, Annalisa Perez

Open Access Theses & Dissertations

Technology, albeit exceedingly useful, has exponentially exacerbated the communications dilemma between the technical and the non-technical. Additionally, based on a current new understanding of the term environmental, it can no longer be fully defined by terms such as air, water, waste, or purification. Rather, the meaning of environmental has been globally transformed in several ways. The term environmental is encompassing an expansion of understanding and is further defined with words such as essence, perception, rapport and multi-dimensional spaces. This work, Environmental Dynamics: A Compendium of Rhetorical Application (EDC), provides a framework where communication can be enhanced in areas where communication …

Go to article

Fabrication And Testing Of Cfrp Composites With Embedded Piezoelectric Particles For Temperature Sensing And Energy Harvesting, Emilio Tarango Valles Jan 2016

Fabrication And Testing Of Cfrp Composites With Embedded Piezoelectric Particles For Temperature Sensing And Energy Harvesting, Emilio Tarango Valles

Open Access Theses & Dissertations

As a part of this world's continuous evolution and technological advancements, smart materials and functional composites have become an attractive topic. In many cases, these new functional composites are replacing the traditional engineering material due to their customizable mechanical properties. This Thesis analyzes and demonstrates the signal response, sensing capabilities and structural properties from Carbon/Glass Fiber Reinforced Plastic Composites (CFRP) with embedded Lead Zirconate Titanate Particles (PZT). The added PZT particles function as actuators, giving the composites a functionality. The PZT quantity inside each composite was variated to study better and characterize the mechanical and electrical properties; the variations were …

Go to article

Analysis Of Road Vehicle Aerodynamics With Computational Fluid Dynamics, Christian Armando Mata Jan 2016

Analysis Of Road Vehicle Aerodynamics With Computational Fluid Dynamics, Christian Armando Mata

Open Access Theses & Dissertations

A road vehicles aerodynamics can be one of the most influential aspects of its performance. With the increased importance on fuel efficiency in recent years, new road vehicles are being developed smaller in size, with smaller displacement engines, as well as with improved aerodynamics. The aerodynamics of a vehicle can have a significant effect on its fuel efficiency, as well as other important aspects of the vehicles performance such as the top speed, acceleration, and handling. A study focusing on analyzing aerodynamic effects due to vehicle geometries such as wheels covered by the vehicles body in comparison to open wheels …

Go to article

Flame Front Structures Studies Of Highly Turbulent Reacting Flow Over A Backward Facing Step Using Khz Oh-Ch Planar Laser Induced Fluorescence, Arturo Acosta-Zamora Jan 2016

Flame Front Structures Studies Of Highly Turbulent Reacting Flow Over A Backward Facing Step Using Khz Oh-Ch Planar Laser Induced Fluorescence, Arturo Acosta-Zamora

Open Access Theses & Dissertations

In recent years, there has been a greater move in the scientific and political community to increase combustion efficiency and reduce emission levels; for this reason, it is crucial to gain a better understanding of combustion. Experimental work at relevant conditions and the data generated from these is needed in order to gain a better understanding of combustion; this data may also be used for validation and further refinement of computational models and simulations. The improvement of optical combustion diagnostics systems has opened new ways to explore these combustion processes. The testing of a high intensity turbulence combustion system is …

Go to article

Structural Design Of Liquid Oxygen/Liquid Methane Robotic Lander Janus, Mariana Chaidez Jan 2016

Structural Design Of Liquid Oxygen/Liquid Methane Robotic Lander Janus, Mariana Chaidez

Open Access Theses & Dissertations

As the attempt to send humans to Mars has gained momentum in the last decade, the need to find alternative propellants that are safer, less toxic, and yields a better performance has become apparent [1]. Liquid methane and oxygen have emerged as a suitable alternative. In addition, the incorporation of liquid methane/liquid oxygen into the propulsion system has demonstrated an increase in engine performance, as well as a reduction in the volume, size and complexity of the propulsion system. In an attempt to further understand the technologies that are possible to develop using liquid oxygen (LO2) and liquid methane (LCH4), …

Go to article

Implementation Of New System For Oxygen Generation And Carbon Dioxide Removal, Angelo Peter Karavolos Jan 2016

Implementation Of New System For Oxygen Generation And Carbon Dioxide Removal, Angelo Peter Karavolos

Open Access Theses & Dissertations

This research effort develops an integrated system for CO2 removal and O2 production. A unique material, dodeca-tungsto-phosphoric acid (H3PO4W12O3; henceforth referred to as DTPA) is mixed with tetra-ethyl-ortho-silicate Si(OC2H5)4 or TEOS. This mixture exhibits unique properties of heat absorption and high electrical conductivity. In the system described herein, the DTPA resides within a cross linked arrangement of TEOS. The DTPA furnishes a source of O2, while the TEOS furnishes structural support for the large DTPA crystals. In addition, the large amount of H2O within the crystal also adsorbs CO2. It can also be cross-linked with other polymers such as polycarbonate, …

Go to article

Battery Energy Storage System (Bess) Based Photovoltaic Charging Station (Pv-Cs) For A Green University Transportation, Ayda Esfandyari, Agata Świerc, Brian Norton, Michael Conlon, Sarah Mccormack Jan 2016

Battery Energy Storage System (Bess) Based Photovoltaic Charging Station (Pv-Cs) For A Green University Transportation, Ayda Esfandyari, Agata Świerc, Brian Norton, Michael Conlon, Sarah Mccormack

Conference Papers

With the trends encouraged by governments and political parties to increase the adoption of Renewable Energy Sources (RES); solar energy, and in particular photovoltaics (PV), is poised as an excellent candidate to offset the energy requirements of charging stations (PV-CS) for Electric Vehicles (BEV). This work presents a 10.5 kW Transient System Simulation (TRNSYS) model of a university campus PV-CS to determine sizing as well to determine the best operating strategies for a Battery Energy Storage System (BESS). The economical optimization model is formulated via theoretical approach adopting the Simple Payback Period (SPP) indicator. The optimization takes into account the …

Go to article

Resolving The Policy Paradox: The Case Of Biofuel Production In Ireland, Alan Gilmer, Mark J. Mcgarrity, Vivienne Byers Jan 2016

Resolving The Policy Paradox: The Case Of Biofuel Production In Ireland, Alan Gilmer, Mark J. Mcgarrity, Vivienne Byers

Articles

Purpose – The purpose of this paper is to determine the status of policy design and policy implementation in the biofuel sector in Ireland. The focus of the work addresses the overarching operational context of the biofuel sector in Ireland and the role of different actors in shaping and resolving inconsistencies in policy outlook and practice. Design/methodology/approach – This study used a qualitative research approach involving a series of semi-structured interviews with members of the relevant sub-groups concerned. This study sought to address two questions – whether current or proposed policy is likely to affect consumption of indigenous biofuel feedstocks …

Go to article

Equi-Biaxial Fatigue Behaviour Of Magnetorheological Elastomers In Magnetic Fields, Yanfen Zhou, Mark Johnson, Shipeng Wen, Tony Betts, Stephen Jerrams Jan 2016

Equi-Biaxial Fatigue Behaviour Of Magnetorheological Elastomers In Magnetic Fields, Yanfen Zhou, Mark Johnson, Shipeng Wen, Tony Betts, Stephen Jerrams

Articles

The equi-biaxial fatigue behaviour of silicone based magnetorheological elastomers (MREs) in external magnetic fields was studied. Wöhler curves relating fatigue life to stress amplitude and dynamic stored energy for MREs with a range of magnetic particle contents were derived. It was found that the fatigue life of MREs in magnetic fields was higher than that without magnetic fields. Under constant stress amplitude conditions, the presence of magnetic fields resulted in longer times for the samples to undergo large deformations and thus complex modulus (E*) decreased at a slower rate during the fatigue process, especially for low stress amplitudes. MRE samples …

Go to article

First Prev Next Last