Engineering Commons^™

Protection Of A 138/34.5 Kv Transformer Using Sel 387-6 Relay, Aamani Lakkaraju

Masters Theses

"Schweitzer Engineering laboratories (SEL) donated the SEL 387, SEL 311L, and SEL 351S relays and the SEL AMS to Missouri University of Science and Technology. This thesis documents the demonstration approach to set the SEL 387 relay to protect a grounded wye-grounded wye transformer and then test these settings by injecting fault currents into the relay using the SEL AMS. This thesis explains the approach to set the differential element of the SEL 387 relay to protect a transformer against internal faults and the overcurrent element of the SEL 387 relay to protect transformer against external faults. A radial power …

A Verified Information-Flow Architecture, Arthur Azevedo De Amorim, Nathan Collins, André Dehon, Delphine Demange, Cătălin Hriţcu, David Pichardie, Benjamin C. Pierce, Randy Pollack, Andrew Tolmach

Computer Science Faculty Publications and Presentations

SAFE is a clean-slate design for a highly secure computer system, with pervasive mechanisms for tracking and limiting information flows. At the lowest level, the SAFE hardware supports fine-grained programmable tags, with efficient and flexible propagation and combination of tags as instructions are executed. The operating system virtualizes these generic facilities to present an information-flow abstract machine that allows user programs to label sensitive data with rich confidentiality policies. We present a formal, machine-checked model of the key hardware and software mechanisms used to dynamically control information flow in SAFE and an end-to-end proof of noninterference for this model. We …

Modeling Of Mzm-Based Photonic Link Power Budget, Kehan Zhu, Cheng Li, Nan Qi, Marco Fiorentino, Raymond Beausoleil, Vishal Saxena

Electrical and Computer Engineering Faculty Publications and Presentations

An accurate methodology for analyzing the Mach-Zehnder modulator (MZM) based optical link power budget is presented. It optimizes the transceiver’s system-level performance to meet the specifications of the optical links with N-level (N=2,4,8) pulse amplitude modulation format for high-speed signaling.

Seeing In The Dark And Through Walls: Using Ir Cameras In Stem Outreach, Thad B. Welch Iii, Andres Valdepena Delgado, Morgan Brimstein, Drew Buckmiller, Ryan Schwartz, Donna R. Welch, Rhett James Edwards

Electrical and Computer Engineering Faculty Publications and Presentations

The recent introduction of affordable infrared (IR) cameras and IR imaging attachments for smartphones has provided a unique opportunity to enhance the education of K-12 students. We have acquired a number of different IR cameras and IR camera attachments and discuss the utilization of these devices in both a college course and in our STEM and STEAM outreach efforts. While our outreach efforts have placed us in a classroom for just an hour or two at a time, thanks to local IEEE Chapter support, we have placed IR cameras in these classrooms for several weeks at a time.

This paper …

A Teacher’S Journey Integrating Engineering In A Middle School Science Classroom And The Effects On Student Attitudes (Rtp), Christie Jilek, Noah Salzman

Electrical and Computer Engineering Faculty Publications and Presentations

As teachers are encouraged to help students become problem solvers, incorporating engineering methods into the classroom has become an important theme of conversation. The purpose of this paper is to explore the change in student attitudes when integrating engineering instruction within a middle school science classroom. This study involves 8th grade students located within a single science teacher’s classroom exploring the integration of engineering activities and content for the first time. We assessed student attitudes using a survey constructed by the Friday Institute¹ aimed measuring perception toward STEM related fields and study. Surveys were administered before and after engineering …

Power Control And Beamforming Design For Swipt In Af Two-Way Relay Networks, Wei Wang, Rui Wang, Hani Mehrpouyan, Guoan Zhang

Electrical and Computer Engineering Faculty Publications and Presentations

In this paper, we study the problem of joint power control and beamforming design for simultaneous wireless information and power transfer (SWIPT) in an amplify-and-forward (AF) based two-way relaying (TWR) network. The considered system model consists of two source nodes and a relay node. Two single-antenna source nodes receive information and energy simultaneously via power splitting (PS) from the signals sent by a multi-antenna relay node. Our objective is to maximize the weighted sum power at the two source nodes subject to quality of service (QoS) constraints and the transmit power constraints. However, the joint optimization of the relay beamforming …

Energy Efficient Switched Parasitic Array Antenna For 5g Networks And Iot, Ahmed Kausar, Hani Mehrpouyan, Mathini Sellathurai, Rongrong Qian, Shafaq Kausar

Electrical and Computer Engineering Faculty Publications and Presentations

This paper includes design and implementation result of an adaptive beam forming antenna for upcoming 5G and Internet of Things (IoT). Switched parasitic array antennas are low cost, small sized and compact circular array antennas that steer beam in a desired direction by variation in switching pattern of parasitic elements. The proposed antenna design has an active center element, which is surrounded by several symmetrically placed parasitic elements. The designed antenna has a gain of 8 dB and is capable of 360 degrees beam steering in steps of 60 degrees each. Simulations are validated with results of the fabricated antenna. …

Connecting Hardware And Software In A Middle School Engineering Outreach Effort-Rtp, Noah Salzman, Sin Ming Loo

Electrical and Computer Engineering Faculty Publications and Presentations

Recent years have seen tremendous growth in outreach programs aimed at bringing computer programming to children and young adults via in-class and extracurricular coding activities. Programs such as the Hour of Code and Girls who Code have introduced millions of young people to programming around the world. For this study, we explored how combining programming with interactive electronics hardware can create a more engaging and dynamic learning environment for some students than what programming alone can achieve.

In this paper, we describe an electrical engineering outreach effort in collaboration with the technology and engineering teacher at a local middle school. …

Parametric Investigations Into Internal Surface Modification Of Brass Tubes With Alternating Magnetic Field, Harish Kumar, Sehijpal Singh, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications

The final finish operations have great significance in an overall manufacturing cycle of a product. The surface finishing and modification of surfaces have been the vital requirements of most of the products. The processes like shot peening, shot blasting, abrasive finishing and super finishing are being largely employed for such requirements. While final finishing of flat and outside surfaces are relatively easy and well established, the internal surfaces such as those of pipes is not so simple. In this paper, the application of low frequency alternative magnetic field has been explored for imparting surface modification including surface on the internal …

Pre-College Engineering Activities With Electronic Circuits (Work-In-Progress), Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

Projects involving engineering experimentation, design, and measurement can be effective content for pre-college STEM outreach. Such applications-oriented activities can promote literacy and interest in technical topics and careers and have the added benefit of showing the relevance of science and mathematics. Exposure to electrical engineering concepts is discussed using the 555 timer integrated circuit. This low-cost device can be used for modular activities involving the production of light, sound, and motion. Specific projects are presented that are appropriate for pre-college students from 9th-grade through 12th-grade.

New Chemistry For The Growth Of First-Row Transition Metal Films By Atomic Layer Deposition, Joseph Peter Klesko

Wayne State University Dissertations

Thin films containing first-row transition metals are widely used in microelectronic, photovoltaic, catalytic, and surface-coating applications. In particular, metallic films are essential for interconnects and seed, barrier, and capping layers in integrated circuitry. Traditional vapor deposition methods for film growth include PVD, CVD, or the use of plasma. However, these techniques lack the requisite precision for film growth at the nanoscale, and thus, are increasingly inadequate for many current and future applications. By contrast, ALD is the favored approach for depositing films with absolute surface conformality and thickness control on 3D architectures and in high aspect ratio features. However, the …

On-Orbit Inter-Satellite Radiometric Calibration Of Cross-Track Scanning Microwave Radiometers, Hamideh Ebrahimi

Electronic Theses and Dissertations

This dissertation concerns the development of an improved algorithm for the inter-satellite radiometric calibration (XCAL) for cross track scanning microwave radiometers in support of NASA's Global Precipitation Mission (GPM). This research extends previous XCAL work to assess the robustness of the CFRSL "double difference" technique for sounder X-CAL. In this work, using a two-year of observations, we present a statistical analysis of radiometric biases performed over time and viewing geometry. In theory, it is possible to apply the same X-CAL procedure developed for conical-scanning radiometers to cross-track scanners; however the implementation is generally more tedious. For example, with the cross-track …

A Novel Relaxed Hierarchical Equivalent Source Algorithm (Rhesa) For Electromagnetic Scattering Analysis Of Dielectric Objects, Xin Fu, Li (Lijun) Jun Jiang, Hong Tat Ewe

Electrical and Computer Engineering Faculty Research & Creative Works

A novel relaxed hierarchical algorithm based on the surface equivalence principle for the volume integral equations (VIEs) is proposed in this work. The equivalent sources residing on relaxed spherical equivalence surfaces are established by exact integral formulations. The equivalence surfaces are exploited hierarchically to accelerate matrix–vector product in iterative solutions for the VIEs. The computation time and memory cost complexity of the proposed algorithm for dielectric scatters scale as O(N4/3) and O(N) , respectively. Numerical examples validate the accuracy and capability of the proposed algorithm.

Study Of Role Of Meniscus And Viscous Forces During Liquid-Mediated Contacts Separation, Prabin Dhital

All Graduate Theses, Dissertations, and Other Capstone Projects

Menisci may form between two solid surfaces with the presence of an ultra-thin liquid film. When the separation operation is needed, meniscus and viscous forces contribute to an adhesion leading stiction, high friction, possibly high wear and potential failure of the contact systems, for instance microdevices, magnetic head disks and diesel fuel injectors. The situation may become more pronounced when the contacting surfaces are ultra-smooth and the normal load is small. Various design parameters, such as contact angle, initial separation height, surface tension and liquid viscosity, have been investigated during liquid-mediated contact separation. However, how the involved forces will change …

Thermodynamics And Kinetics Of The Three-Way Junction Of Phi29 Motor Prna And Its Assembly Into Nanoparticles For Therapeutic Delivery To Prostate Cancer, Daniel W. Binzel

Theses and Dissertations--Pharmacy

The emerging field of RNA nanotechnology necessitates creation of functional RNA nanoparticles, but has been limited by particle instability. Previously, it was found the three-way junction (3WJ) of the Phi29 DNA packaging motor pRNA was found to be ultra-stable and assemble in solution without the presence of metal ions. The three-way junction is composed of three short oligo RNA strands and proven to be thermodynamically stable. Here the assembly mechanism, thermodynamic and enzymatic stabilities, and kinetics are examined in order to understand the stability behind this unique motif. Thermodynamic and kinetics studies found that the pRNA 3WJ formed out of …

Openthinning: Fast 3d Thinning Based On Local Neighborhood Lookups, Tobias Post, Christina Gillmann, Thomas Wischgoll, Hans Hagen

Computer Science and Engineering Faculty Publications

3D Thinning is an often required image processing task in order to perform shape analysis in various applications. For researchers in these domains, a fast, flexible and easy to access implementation is required. Open source solutions, as the Insights Segmentation and Registration Toolkit (ITK), are often used for image processing and visualization tasks, due to their wide range of provided algorithms. Unfortunately, ITK’s thinning implementation is computational expensive and allows solely one specific thinning approach. Therefore, this work presents OpenThinning, an open source thinning solution for 3D image data. The implemented algorithm evaluates a moving local neighborhood to find deletable …

Development Of Three-Dimensional Lung Multicellular Spheroids In Air- And Liquid-Interface Culture For The Evaluation Of Anticancer Therapeutics, Samantha A. Meenach, Alexandran N. Tsoras, Ronald C. Mcgarry, Heidi M. Mansour, J. Zach Hilt, Kimberly W. Anderson

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Three-dimensional (3D) lung multicellular spheroids (MCS) in liquid-covered culture (LCC) and air-interface culture (AIC) conditions have both been developed for the evaluation of aerosol anticancer therapeutics in solution and aerosols, respectively. The MCS were formed by seeding lung cancer cells on top of collagen where they formed spheroids due to the prevalence of cell-to-cell interactions. LCC MCS were exposed to paclitaxel (PTX) in media whereas AIC MCS were exposed to dry powder PEGylated phospholipid aerosol microparticles containing paclitaxel. The difference in viability for 2D versus 3D culture for both LCC and AIC was evaluated along with the effects of the …

On The Linear Approximation Of Mixture Internal Energies Of Departure, Robert B. Kelly, Angelo Lucia

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Direct Monte Carlo simulation of internal energies of departure for binary mixtures of geological interest are gathered and compared to those calculated using a linear mixing rule. Simulation results for gas–oil, oil–oil, and oil–water mixtures show that the linear mixing rule used in the Gibbs–Helmholtz Constrained (GHC) equation of state framework gives accurate approximations of binary mixture internal energies of departure. A flowchart for computing internal energies of departure using Monte Carlo simulation is included along with a sensitivity analysis for the GHC mixture energy parameter with respect to uncertainty in internal energies of departure.

Synthesis And Characterization Of Nanocomposite Microparticles (Ncmp) For The Treatment Of Cystic Fibrosis-Related Infections, Zimeng Wang, Samantha A. Meenach

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Purpose:

Pulmonary antibiotic delivery is recommended as maintenance therapy for cystic fibrosis (CF) patients who experience chronic infections. However, abnormally thick and sticky mucus present in the respiratory tract of CF patients impairs mucus penetration and limits the efficacy of inhaled antibiotics. To overcome the obstacles of pulmonary antibiotic delivery, we have developed nanocomposite microparticles (nCmP) for the inhalation application of antibiotics in the form of dry powder aerosols.

Methods:

Azithromycin-loaded and rapamycin-loaded polymeric nanoparticles (NP) were prepared via nanoprecipitation and nCmP were prepared by spray drying and the physicochemical characteristics were evaluated.

Results:

The nanoparticles were …

Tailoring Optical And Plasmon Resonances In Core-Shell And Core-Multishell Nanowires, Sarath Ramadurgam

Open Access Dissertations

Semiconductor nanowires (NWs) are sub-wavelength structures which exhibit strong optical (Mie) resonances in the visible range. In addition to such optical resonances, the localized surface plasmon resonances (LSPR) in metal and semiconductor (or dielectric) based core-shell (CS) and core-multishell (CMS) NWs can be tailored to achieve novel negative-index metamaterials (NIM), extreme absorbers, invisibility cloaks and sensors. Particularly, in this dissertation, the versatility of CS and CMS NWs for the design of negative-index metamaterials in the visible range and, plasmonic light harvesting in ultrathin photocatalyst layers for water splitting are studied.

Utilizing the LSPR in the metal layer and the magnetic …

Bakken Crude Oil And The Changing Logistics Of The American Oil Industry, Austin Rau

Independent Research

The extraction of Bakken crude oil in the Williston Basin of North Dakota is transforming how petroleum is shipped. Before 2008, North American oil was carried primarily via pipeline from source regions to refineries along the Gulf Coast or to metropolitan areas close to consumers. The current pipeline system is ill-equipped to accommodate massive volumes of oil from this previously low producing region. Lack of infrastructure and high demand for “light tight oil” (LTO) led to the use of railroads as a means of moving the product to refineries across the nation. Transporting oil via rail over long distances was …

Distinct And Shared Determinants Of Cardiomyocyte Contractility In Multi-Lineage Competent Ethnically Diverse Human Ipscs, Martin L. Tomov, Zachary T. Olmsted, Haluk Dogan, Eda Gongorurler, Maria Tsompana, Hasan H. Otu, Michael Buck, Eun-Ah Chang, Jose Cibelli, Janet L. Paluh

Department of Electrical and Computer Engineering: Faculty Publications

The realization of personalized medicine through human induced pluripotent stem cell (iPSC) technology can be advanced by transcriptomics, epigenomics, and bioinformatics that inform on genetic pathways directing tissue development and function. When possible, population diversity should be included in new studies as resources become available. Previously we derived replicate iPSC lines of African American, Hispanic-Latino and Asian self-designated ethnically diverse (ED) origins with normal karyotype, verified teratoma formation, pluripotency biomarkers, and tri-lineage in vitro commitment. Here we perform bioinformatics of RNA-Seq and ChIP-seq pluripotency data sets for two replicate Asian and Hispanic-Latino ED-iPSC lines that reveal differences in generation of …

A Wavelet Transform Module For A Speech Recognition Virtual Machine, Euisung Kim

All Graduate Theses, Dissertations, and Other Capstone Projects

This work explores the trade-offs between time and frequency information during the feature extraction process of an automatic speech recognition (ASR) system using wavelet transform (WT) features instead of Mel-frequency cepstral coefficients (MFCCs) and the benefits of combining the WTs and the MFCCs as inputs to an ASR system. A virtual machine from the Speech Recognition Virtual Kitchen resource (www.speechkitchen.org) is used as the context for implementing a wavelet signal processing module in a speech recognition system. Contributions include a comparison of MFCCs and WT features on small and large vocabulary tasks, application of combined MFCC and WT features on …

Strain Distribution And Crack Detection In Thin Unbonded Concrete Pavement Overlays With Fully Distributed Fiber Optic Sensors, Yi Bao, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims at evaluating the feasibility of strain measurement and crack detection in thin unbonded concrete pavement overlays with pulse prepump Brillouin optical time domain analysis. Single-mode optical fibers with two-layer and three-layer coatings, respectively, were applied as fully distributed sensors, their performances were compared with analytical predictions. They were successfully protected from damage during concrete casting of three full-scale concrete panels when 5 to 10-cm-thick protective mortar covers had been set for 2 h. Experimental results from three-point loading tests of the panels indicated that the strain distributions measured from the two types of sensors were in good …

Robust Fuzzy-Sliding Mode Based Upfc Controller For Transient Stability Analysis In Autonomous Wind-Diesel-Pv Hybrid System, Asit Mohanty, Sandipan Patra, Prakash K. Ray

Articles

This study presents a comparative study of transient stability and reactive power compensation issues in an autonomous wind–diesel-photovoltaic based hybrid system (HS) using robust fuzzy-sliding mode based unified power flow controller (UPFC). A linearised small-signal model of the different elements of the HS is considered for the transient stability analysis in the HS under varying loading conditions. An IEEE type 1 excitation system is considered for the synchronous generator in the HS, with negligible saturation characteristic, for detailed voltage stability analysis. It is noted from the simulation results that the performance of UPFC is superior to static VAR compensator and …

Utilising A Loop Structure To Allow A Microfiber Coupler With Larger Taper Diameters To Be Used For Sensing, Fangfang Wei, Gerald Farrell, Qiang Wu, Yuliya Semenova

Articles

This paper examines a technique that utilizes a Sagnac loop with a microfiber coupler (MFC) as a coupler which allows the MFC to operate effectively as a sensor but with larger than normal tapered fiber diameters. The proposed structure is found to be suitable for temperature and refractive index (RI) sensing. It is shown that a variation in the surrounding of the MFC RI results in a shift of the output spectrum, while a temperature variation leads to changes in the intensity of the interference dips. A decrease in the waist diameter of the MFC results in an increase in …

Laser Micromachining Of Contactless Rf Antenna Modules For Payment And Cards And Wearable Objects, Matthias John

Conference papers

The use of contactless payment methods for consumer transactions is becoming increasingly popular - 1.1 billion contactless transactions were made by Visa cardholders across Europe in the 12 months to July 2015 (€12.6 billion total value). Typically the contactless payment process uses a Radio Frequency (RF) enabled smartcard or a Near Field Communication (NFC) enabled smartphone. In order to ensure continued market acceptance and repeat usage the contactless operation must be robust, quick and efficient. This paper describes the development of an inductively coupled contactless smartcard utilising UV DPSS laser micromachining to fabricate the novel antenna structures from copper laminated …

Gravity As An Ultra-Low Frequency Scattering Efect, Jonathan Blackledge

Articles

Under the weak gravitational field appromination and for the 00-component of the stress-energy tensor, Einstein's field equations for the gravitational potential. By considering Newton' field equation to be the result of an ultra-low frequency scattering effect (in the limiting) case, this work introduces a model where gravitational field is taken to be the result of an ultra-low frequency gravitational wave (propagating in a near-Cartesian Minkowski space) scattering from an object (a mass)

A Framework To Generate A Smart Manufacturing System Configurations Using Agents And Optimization, Khalid Nagadi

Electronic Theses and Dissertations

Manufacturing is a crucial element in the global economy. During the last decade, the national manufacturing sector loses nearly 30% of its workforce and investments. Consequently, the quality of the domestic goods, global share, and manufacturing capabilities has been declined. Therefore, innovative ways to optimize the usage of the Smart Manufacturing Systems (SMS) are required to form a new manufacturing era. This research is presenting a framework to optimize the design of SMS. This includes the determination of the suitable machines that can perform the job efficiently, the quantity of those machines, and the potential messaging system required for sharing …

Geolocation Of Diseased Leaves In Strawberry Orchards For A Custom-Designed Octorotor, Christian Garcia

Electronic Theses and Dissertations

In recent years, technological advances have shown a strive for more automated processes in agriculture, as seem with the use of unmanned aerial vehicles (UAVs) with onboard sensors in many applications, including disease detection and yield prediction. In this thesis, an octorotor UAV is presented that was designed, built, and flight tested, with features that are custom-designed for strawberry orchard disease detection. To further automate the disease scouting operation, geolocation, or the process of determining global position coordinates of identified diseased regions based on images taken, is investigated. A Kalman filter is designed, based on a linear measurement model derived …