Engineering Commons^™

General Interest Articles, The Professional Constructor

The Professional Constructor

No abstract provided.

Contractor Feasibility In Providing Cost Segregation Studies From Detailed Estimates: A Case Study, Ben F. Bigelow, Jeremy Robinson, John Killingsworth

The Professional Constructor

Profit margins are tight for general contractors, averaging under 3% (Construction Financial Management Association). Further, competition for projects can be very fierce, so any opportunity for increased profit or a competitive advantage in bidding bears consideration by general contractors. Cost segregation studies represent such an opportunity but the feasibility of a general contractor providing them has not been studied. A cost segregation study allows a property owner to accelerate the depreciation of certain portions of a building thus reducing tax liability and increasing cash flow. Because the information needed for a cost segregation study can be found in a detailed …

A Framework For Analyzing Intraorganizational Congruence Of Safety Practices On Safety Performance – A Pilot Study Of Construction, Benjamin Hill, Mohammed S. Hashem M. Mehany, Richard J. Gebken

The Professional Constructor

Previous research has determined that improving employee congruence on organizational methods and goals leads to improved organizational performance. This research establishes a comprehensive framework of common and recommended safety practices that can be used for intraorganizational congruence data collection regarding safety practices. The research is also developing a method for congruence calculation and examine the congruence effect on the subcontractor’s safety performance metrics through a pilot study. The established framework identified and organized 170 practices under seven conceptual, safety-practice categories. The congruence analysis and the pilot study revealed several areas of high and low congruency along with significant correlations between …

Factors Of Employee Loyalty Among Construction Management Field Personnel, Estimators & Bim/Design Specialists: Insights For General Contractors, Colby Humphrey, Ben F. Bigelow

The Professional Constructor

Since 2008 construction employment has dropped considerably and has remained below 2007 levels, with construction management positions still about 14% down (U.S. Department of Labor 2015). Despite the boom currently occurring in the construction industry, general contractors (GCs) are finding it difficult to fill project management positions (AGC 2014), and construction firms expect these challenges to continue (Mutikani 2014). With greater demand for managers, retaining quality people is a paramount concern. Everyone knows the adage that “money talks”, but what can a GC do to engender loyalty besides just paying more? To explore that question and attempt to better understand …

A Second Language Acquisition Approach To Learning Programming Languages, Rachel Cunningham, Paula Sanjuan Espejo, Christina Frederick, Lulu Sun, Li Ding

Publications

The instructional design for modules in the study was based on the evidence that learning a programming language is analogous to students acquiring a second language, and utilized tools from Second Language Acquisition (SLA) theory. A programming language has vocabulary, syntax, grammar and communicative outcomes that must be sufficiently developed for the learner to function successfully in the environment that utilizes the language. This proposed study utilized an SLA approach to programming language in a blended learning environment. Modifications to the course pedagogy included breaking the course topics into video lessons focusing on basic programming vocabulary, grammar, and syntax. These …

Aminoacyl-Trna Synthetase Production For Unnatural Amino Acid Incorporation And Preservation Of Linear Expression Templates In Cell-Free Protein Synthesis Reactions, Andrew Broadbent

Theses and Dissertations

Proteins—polymers of amino acids—are a major class of biomolecules whose myriad functions facilitate many crucial biological processes. Accordingly, human control over these biological processes depends upon the ability to study, produce, and modify proteins. One innovative tool for accomplishing these aims is cell-free protein synthesis (CFPS). This technique, rather than using living cells to make protein, simply extracts the cells' natural protein-making machinery and then uses it to produce protein in vitro. Because living cells are no longer involved, scientists can freely adapt the protein production environment in ways not otherwise possible. However, improved versatility and yield of CFPS protein …

The Impact Of Bicycle Corridors On Travel Demand In Utah, Christopher Kent Haskell

Theses and Dissertations

Bicycling as an alternate mode of transportation has been on the rise. It is environmentally friendly in nature and the associated health benefits have made it a popular choice for many types of trips. The purpose of this research is to increase understanding of the impacts of implementing bicycle corridors (as part of the Utah Department of Transportation's (UDOT) Inclusion of Active Transportation policy) on bicycle rate as a function of roadway characteristics. The results of this research will be used in determining when and where bicycle corridors will enhance the transportation system and an estimate of the overall impact …

Design, Development And Testing Of Web Services For Multi-Sensor Snow Cover Mapping, Jiri Kadlec

Theses and Dissertations

This dissertation presents the design, development and validation of new data integration methods for mapping the extent of snow cover based on open access ground station measurements, remote sensing images, volunteer observer snow reports, and cross country ski track recordings from location-enabled mobile devices. The first step of the data integration procedure includes data discovery, data retrieval, and data quality control of snow observations at ground stations. The WaterML R package developed in this work enables hydrologists to retrieve and analyze data from multiple organizations that are listed in the Consortium of Universities for the Advancement of Hydrologic Sciences Inc …

Conjugate Heat Transfer And Average Versus Variable Heat Transfer Coefficients, Tyler James Macbeth

Theses and Dissertations

An average heat transfer coefficient, h_bar, is often used to solve heat transfer problems. It should be understood that this is an approximation and may provide inaccurate results, especially when the temperature field is of interest. The proper method to solve heat transfer problems is with a conjugate approach. However, there seems to be a lack of clear explanations of conjugate heat transfer in literature. The objective of this work is to provide a clear explanation of conjugate heat transfer and to determine the discrepancy in the temperature field when the interface boundary condition is approximated using h_bar compared to …

Analysis Of High Fidelity Turbomachinery Cfd Using Proper Orthogonal Decomposition, Ronald Alex Spencer

Theses and Dissertations

Assessing the impact of inlet flow distortion in turbomachinery is desired early in the design cycle. This thesis introduces and validates the use of methods based on the Proper Orthogonal Decomposition (POD) to analyze clean and 1/rev static pressure distortion simulation results at design and near stall operating condition. The value of POD comes in its ability to efficiently extract both quantitative and qualitative information about dominant spatial flow structures as well as information about temporal fluctuations in flow properties. Observation of the modes allowed qualitative identification of shock waves as well as quantification of their location and range of …

Efficacy Of Physical Layer Preamble Manipulation For Ieee 802.11a/Ac, Benjamin W. Ramsey, Jonathan D. Fuller, Christopher W. Badenhop

Faculty Publications

Wireless physical layer manipulation is a recently discovered technique for selective packet obfuscation. This process exploits the unique and proprietary nature of transceiver designs rather than manufacturing imperfections. To date, preamble manipulation has only successfully been demonstrated on low data rate transceivers operating in the2.4 GHz band. This Letter investigates the effectiveness of preamble manipulation on common 5 GHz IEEE 802.11a and IEEE 802.11ac wireless transceivers for the first time. Herein it is demonstrated that the preamble short training sequence length can be manipulated to discern among the six transceiver designs under test with greater than 99% accuracy using fewer …

Dynamic Control Of Radiative Surface Properties With Origami-Inspired Design, Rydge B. Mulford, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Thermal management systems for space equipment commonly use static solutions that do not adapt to environmental changes. Dynamic control of radiative surface properties is one way to respond to environmental changes and to increase the capabilities of spacecraft thermal management systems. This paper documents an investigation of the extent to which origami-inspired surfaces may be used to control the apparent absorptivity of a reflective material. Models relating the apparent absorptivity of a radiation shield to time-dependent surface temperatures are presented. Results show that the apparent absorptivity increases with increasing fold density and indicate that origami-inspired designs may be used to …

Oil Recovery By Flooding; Sensitivity Analysis To Technical Parameters, Rana Osama Fahmi Saqer

Theses

Numerous enhanced oil recovery techniques including miscible gas injection, chemical, thermal and other methods are applied at the third phase of production after both primary and secondary recovery have been exhausted. Polymer flooding is one of the chemical methods that recover more oil by decreasing the mobility of the system; by increasing the viscosity of the injected water that results in an improvement in the volumetric sweep efficiency.

The objective of this work is to asses and select the development options using polymer process that maximize oil recovery for a synthetic reservoir model where technical parameters are optimized thoroughly.

Reservoir …

Oil Recovery By Polymer Flooding; Sensitivity Analysis To Technical Parameters, Rana Osama Fahmi Saqer

Theses

Numerous enhanced oil recovery techniques including miscible gas injection, chemical, thermal and other methods are applied at the third phase of production after both primary and secondary recovery have been exhausted. Polymer flooding is one of the chemical methods that recover more oil by decreasing the mobility of the system; by increasing the viscosity of the injected water that results in an improvement in the volumetric sweep efficiency.

The objective of this work is to asses and select the development options using polymer process that maximize oil recovery for a synthetic reservoir model where technical parameters are optimized thoroughly.

Reservoir …

Contact Angle And Ift Measurements Of Smart Water At Elevated Temperatures And Pressures For Evaluating Wettability In A Selected Carbonate Reservoir In The Uae, Jassim Abubacker Ponnambathayil

Theses

Water flooding has been regarded as a well-known secondary oil recovery method. In the recent years, extensive research on crude oil, brine, and rock systems has acknowledged that the composition of the injected water can change wetting properties of the reservoir during a water flood in a promising way to improve oil recovery. Hence, injection of “smart water” with correct salinity and composition is considered as a tertiary recovery method. The mechanism behind wettability alteration that is promoted by smart water injection has been a topic of discussion in carbonate and sandstone formations. In this work, some key properties of …

Civil And Environmental Student Wins Award At National Agu Conference | College Of Engineering, Usu College Of Engineering

College of Engineering News

Feb. 29, 2016 – Tyler King, a PhD student in the Department of Civil and Environmental Engineering at Utah StateUniversity, received an outstanding student paper award in hydrology at the fall meeting of the American Geophysical Union.

Application Of Recycled Media And Algae-Based Anaerobic Digestate In Scenedesmus Cultivation, Xinyi E, Czarena Crofcheck, Mark Crocker

Biosystems and Agricultural Engineering Faculty Publications

To make large-algae cultivation systems sustainable, commercial fertilizer inputs should be minimized. One means of achieving this is to maximize the recycle of nutrients used in algae cultivation. In addition to recycling nutrient-containing water from algae harvesting and dewatering, after harvesting algal biomass can be used as a substrate for anaerobic digestion, which can then generate mineralized nutrients to be used for further cultivation. In this study, the effect of recycling media and using mineralized nutrients during Scenedesmus cultivation was investigated. The recycled media proved to be able to support cell growth with nutrient replenishment, and it could be recycled …

Zion File System Simulator, Robert Adams, Frederic Paladin

Open Access Publishing Support Funded Articles

File systems are fundamental for computers and devices with data storage units. They allow operating systems to understand and organize streams of bytes and obtain readable files from them. There are numerous file systems available in the industry, all with their own unique features. Understanding how these file systems work is essential for computer science students, but their complex nature can be difficult and challenging to grasp, especially for students at the beginning of their career. The Zion File System Simulator was designed with this in mind. Zion is a teaching and experimenting tool, in the form of a small …

Electrochemical H2O2 Sensor Based On The Co-Immobilization Of Phosphmolybdic Acid And Graphene On Pedot Film Electrode With Nafion, Hao-Xian Zhou, Jun-Ming Zhang, Zhi-Yu Qu, Pan-Yu Zhang, You-Jun Fan

Journal of Electrochemistry

With a glassy carbon electrode (GCE) as the substrate, the poly(3,4-ethylenedioxythiophene) (PEDOT) film electrode was prepared through the electrochemical polymerization method, then a novel non-enzymatic electrochemical H₂O₂ sensor was fabricated by co-immobilizing phosphomolybdic acid and graphene with Nafion on the PEDOT/GCE electrode. The modified electrodes were characterized by scanning electron microscopy (SEM), while the responsive properties of the sensor to H₂O₂ were investigated by cyclic voltammetry and chronoamperometry. The results demonstrated that, under the optimized conditions, the sensor exhibited good electrocatalytic performance for H₂O₂ reduction. The current response of the sensor …

Improving The Electrochemical Properties Of Polyaniline By Doping With Silver Ions, Hui Xu, Jin-Juan Pu, Yong Chen, Jian Liu

Journal of Electrochemistry

Polyaniline (PANI) is an attractive candidate among the various conductive polymers based on its unique doping/de-doping behavior, intrinsic electrical conductivity, facile synthesis, and environmental stability. However, the poor conductivity and cycle stability in an acid medium have restricted its applications. Our work aims at solving the above problems effectively by doping silver ions into PANI. The PANI and PANI doped with silver ions (PANI/Ag⁺) were synthesized by a facile interfacial polymerization process, which used aniline as a starting material in toluene in contact with an aqueous solution of silver nitrate varied from 0.04 mol•L^-1 to 0.20 mol⋅L …

Adsorption Behavior Of Rhodamine 6g On Silver Surfaces Studied By Electrochemical Surface-Enhanced Raman Spectroscopy, Chan-Juan Chen, Cheng Zong, Guo-Kun Liu, Bin Ren

Journal of Electrochemistry

Rhodamine 6G (R6G) is one of the most common probe molecules employed in single molecule surface-enhanced Raman spectroscopy (SM-SERS). The study in adsorption behavior of R6G will help understand the interactions between R6G and surface. In this paper, we used electrochemical surface-enhanced Raman spectroscopy (SERS) to study the potential-dependent adsorption behavior of R6G on silver electrodes. Our results show that when the potential moved negatively, the orientation of R6G on silver surface changed from vertical to inclined adsorption. This result indicates that the abnormal SM-SERS spectra of R6G observed in the former SM-SERS studies from other research groups are due …

Electrochemical Detection Of Hydrogen Peroxide At Aunps Modified Electrode Using P-Hydroxyphenylboronic Acid As A Precursor, Chun-Yan Wang, Xiao-Qiu Liu, Ying-Xin Qi

Journal of Electrochemistry

We developed a new method for electrochemical detection of hydrogen peroxide (H₂O₂) based on boronate oxidation of p-hydroxyphenylboronic acid. This method using p-aminophenol which is produced from the reaction of H₂O₂ and p-aminophenylboronic acid as a well electrochemical probe, combined with a gold nanoparticles (AuNPs) modified electrode for an indirect detection of H₂O₂. Because of the large surface area and enhanced electrocatalytic behavior by the AuNPs modified electrode, the detection sensitivity was improved. The method could detect H₂O₂ in the concentration range of 1 ~ 100 …

Electrochemical Determination Of Hg(Ii) At Gold Nanoparticles@Carbonaceous Microspheres Modified Electrode, Tian-Yu Qiu, Ming-Chun Wang, Xian-Feng Du, Tian-Jia Jiang, Xing-Jiu Huang

Journal of Electrochemistry

The gold nanoparticles@carbonaceous microspheres (Au@CMSs) and  Au@CMSs modified glassy carbon electrode (GCE) were prepared. The Au@CMSs modified  GCE was further examined for possible sensitive detection of mercury ions (Hg(II)) in an aqueous solution by square wave anodic stripping voltammetry (SWASV). The excellent performance was found in the stripping analysis of Hg(II) in 0.1 mol•L^-1 NaAc-HAc(pH=5.0) with a sensitivity of 25.863 A•(mol•L^-1)^-1 and a detection limit of 3.69×10^-8 mol•L^-1 based on the 3σ method.

Fabrication Of Riboflavin Electrochemical Sensor Based On Au Nanoparticles/Polydopamine/Carbon Nanotubes Modified Glassy Carbon Electrode, Hua-Ping Peng, Mei-Ling Yu, Xin Liu, Pan Liu, Wei Chen, Ai-Lin Liu, Xin-Hua Lin

Journal of Electrochemistry

A novel electrochemical platform for the high sensitivity detection of riboflavin was constructed by Au nanoparticles/polydopamine/carbon nanotubes (Au-PDA-MWCNTs) nanocomposite modified glassy carbon electrode. The Au-PDA-MWCNTs nanocomposite was synthesized by in situ reduction method. The characteristics of the as-prepared Au-PDA-MWCNTs nanocomposite modified electrodes were investigated by using UV-Vis spectroscopy, scanning electron microscopy (SEM) and electrochemical methods. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to study the electrochemical behavior of riboflavin (RF) at Au-PDA-MWCNTs nanocomposite modified electrodes. The results demonstrated that the present electrochemical sensor exhibited a wide linear range from 5×10^-9 mol•L^-1to 1×10^-5 mol•L …

Synthesis Of Fe, N-Doped Graphene/Carbon Black Composite With High Catalytic Activity For Oxygen Reduction Reaction, Chi Chen, Zhi-You Zhou, Xin-Sheng Zhang, Shi-Gang Sun

Journal of Electrochemistry

Oxygen reduction reaction (ORR) is a bottleneck for improving the efficiency of proton-exchange membrane fuel cells as a cathode reaction due to its sluggish kinetics. The exploitation of low cost and high performance non-precious metal catalysts such as Fe/N/C based materials toward ORR has attracted extensive attentions. In this work, the Fe, N-doped graphene nanosheets/carbon black composite was prepared by hydrothermal polymerization and followed by a twice-heat-treatment procedure using 2-aminoimidazole as an N precursor, FeCl₃ as an Fe precursor and KJ600 carbon black as a support. The TEM images revealed that the graphene nanosheets were separated by carbon black …

Electrochemical Syntheses Of Graphene And Its Composites, Bo Zhao, Li Jiang, Ming-Hui Yuen, Xian-Zhu Fu, Rong Sun, Ching-Ping Wong

Journal of Electrochemistry

Graphene is a kind of ideal two-dimensional flat carbon nanomaterials which have unique chemical and physical properties. The attractive potential applications must be based on the high quality mass production of graphene. However, it remains a huge challenge. An electrochemical approach is a fast, environmental friendly and easy-operating method. single- or multi-layered graphene flakes can easily be produced in short periods of time. In this review, the structure, properties and preparation methods of graphene are first introduced. Accordingly, the electrochemical approaches used for the productions of graphene flakes, graphene/inorganic nanocomposites, graphene/polymer composites and graphene analogues are highlighted. Finally, challenges and …

Temperature Effects On Properties Of Aerospace Nickel Hydrogen Cells, Hai-Chang Zhang, Yu-Qi Diao, Wen-Cheng Ming, Xue-Ying Ren, Fei Ding

Journal of Electrochemistry

This has been done using the 60 Ah nickel-hydrogen cell to investigate the temperature effects on properties of aerospace nickel hydrogen cells. The charge-discharge, trickle charge, overcharge, self-discharge and cycle life tests were carried out at different temperatures. The results show that the discharge capacity and overcharge rate were increased first, and then decreased with the raising temperature. On the other hand, the trickle charge value and the 3 days self-discharge rate were raised with increasing temperature. When the temperature was -5 ^oC, the discharge capacity of cell reached the maximum discharge capacity of 63.68 Ah. Based on the …

Effect Of Flame Retardant On Electrochemical Performances Of Lithium Ion Battery With Lini0.4Co0.2Mn0.4O2 As A Positive Electrode Material, Yan-Zhuo Lv, Yong-Xian Ge, Zhen-Bo Wang, Ke Ke

Journal of Electrochemistry

The effect of flame retardant on the electrochemical performances of lithium ion battery by using LiNi_0.4Co_0.2Mn_0.4O₂ as a positive material was studied by measuring the first charge-discharge, cycling, circulation, and AC impedance curves. The experimental data indicated that the discharge capacity of the battery decreased, while the charge transfer resistance and the lithium ion diffusion resistance increased with the increases in the concentrations of the flame retardant in the electrolyte solutions. Furthermore, the stability of the battery at small discharge ratios and the cyclic performance were also improved by the addition of flame …

Electricity Generation Of Microbial Fuel Cell Using Stainless Steel Mesh As Cathode, Hong-Yan Dai, Hui-Min Yang, Xian Liu, Xuan Jian, Xiu-Li Song, Zhen-Hai Liang

Journal of Electrochemistry

In the present work, a dual-chamber microbial fuel cell (MFC) was constructed with aeration tank sludge as an inoculum, carbon felt as an anode and stainless steel mesh without any modification as a cathode. The influence of the cathode size was investigated in terms of voltage output, power generation and electrochemical impedance. The long-term durability of the stainless steel mesh cathode was also evaluated. Results showed that the stainless steel mesh exhibited satisfactory long-term durability as MFC cathode. When the stainless steel mesh size was 2 × 2 cm², the maximum output voltage, power density, the internal resistance …

The Study On Comparison Of Electrochemical Performance In Microbial Fuel Cell With Glucose And Sodium Acetate Acting As Substrates, Lei Fan, Yu Zhao, Ting Li, Qin-Bo Yuan, En-Zhi Wang, Xiao-Bin Wang, Jun-Wen Wang

Journal of Electrochemistry

By inoculating aerobic sludge and anaerobic sludge from the sewage treatment plant, two sets of dual-chamber microbial fuel cells (MFCs) were built with either glucose or sodium acetate acting as a substrate. Accordingly, the electrochemical performances of MFCs were explored with the concentration of the substrates being 0.0335 mol⋅L^-1. The results of the comparative study in glucose system and sodium acetate system showed that the impedance values of anodic half cell were 222 Ω for glucose and 213.67 Ω for sodium acetate, implying no significant effect on the internal resistance in battery with the different substrates. The exchange …